Failed to convert error message

When trying to convert pdf to msword get error "failed to be converted using Adobe ExportPDF online. any reasons why? Adobe doesn't seem to honor the 90 day help promise

Hi
We are trying to resolve this issue on our side, we will have a fix available soon.
As a workaround, can you please try these conversion using Web UI https://exportpdf.acrobat.com/SignIn.html?
Thanks
-sarabjit

Similar Messages

CONVERTING ERROR MESSAGE TO WARNING MESSAGE

HI GURUS,
CAN ANY ONE GIVE ME IDEA HOW TO CONVERT ERROR MESSAGE TO WARNING MESSAGE IN QM MODULE.WHEN I AM POSTING STOCK FROM QUALITY TO UNRESTRICTED. BECAUSE IAM GETTING ERROR WHEN IAM POSTING STOCK GIVING ERROR TRANSFER POSTING THROUGH QUALITY ONLY. MY ERROR MESSAGE NO IS QA495. I TRIED ALL POSIBILITES. BECAUSE I AM NOT GETTING INSPECTION LOT BUT STOCK IN QUALITY. GIVE ME IDEA.
BHAKTA

Dear BHAKTA,
it's not possible to customize every message in SAP System to warning or error.
It depends on the coding. I have found message QA495 twice in coding, both times it's hard coded in Inlcude MM07MQSS. So it's not possible in standard to change this.
How to find this information:
SE91
-> enter the message
-> button 'display'
-> select the line
-> button 'where-used list' (CRTLSHIFTF3)
-> now you get a list of all programms where the message is used
Now you can check if message type is hard coded or read in customizing.
If you really want this you have to modifiy the coding. But I would not recommed this, as hard coded errors are necessary to make sure that the standard scenarios work correctly.
Regards,
Sabine

Converting error message to warning in ME22n

Hello guys,
In ME22n i am not able to delete one material line item,as its displays" Invoices pending for delivery costs (function not possible)",
This is error message,if its possible to convert error message to warning then i wil be able to delete,have made error message to waring message in settings by giving "W" stil i am not able to delete. Please do suggest me. Message number is "06119"

Dear BHAKTA,
it's not possible to customize every message in SAP System to warning or error.
It depends on the coding. I have found message QA495 twice in coding, both times it's hard coded in Inlcude MM07MQSS. So it's not possible in standard to change this.
How to find this information:
SE91
-> enter the message
-> button 'display'
-> select the line
-> button 'where-used list' (CRTLSHIFTF3)
-> now you get a list of all programms where the message is used
Now you can check if message type is hard coded or read in customizing.
If you really want this you have to modifiy the coding. But I would not recommed this, as hard coded errors are necessary to make sure that the standard scenarios work correctly.
Regards,
Sabine

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

Export release build failed with an error message: complilation failed while excuting : compile-abc

I updated air sdk from 4.0 to 16.0 beta to fix apple app store submitting bug. I can build the project and run it on simulator without any problem. But when I tried to export the ios release build, I got this error message: complilation failed while excuting : compile-abc.
I use commmand line to excute compile-abc.exe with the parameters that adt gives it, but it failed without any error message.
Here is the command line:
compile-abc.exe -mtriple=armv7-apple-ios -filetype=obj -sdk "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/avmglue.abc" -fields "C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1 - air16\lib\aot/lib/air-fields.arm-air.txt" -O3 -abc-file-list=E:\MyApp\bin-debug\AOTBuildOutput8184169967790207636.tmp\ABCFilesList.txt
There's a empty file AOTBuildOutput-0000001821_1821.o left in the command line workaroud path. I opened file AOTBuildOutput-0000001821.abc, but didn't get any clue. How can I trace this problem?

Still having similar issues - seems to be when I embed an image - but works for every release except for release build
Tried your work around but doesnt seem to make a different
[Embed(source = "/../assets/[email protected]")]
protected static const ATLAS_IMAGE:Class;
[Embed(source = "/../assets/[email protected]", mimeType = "application/octet-stream")]
protected static const ATLAS_XML:Class;
[Embed(source = "/../assets/iconMap.png")]
protected static const ATLAS_IMAGE_LOW_RES:Class;
[Embed(source = "/../assets/iconMap.xml", mimeType = "application/octet-stream")]
protected static const ATLAS_XML_LOW_RES:Class;
if(Starling.current.viewPort.width > 320)
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE(), false), XML(new ATLAS_XML()));
}else{
atlas = new TextureAtlas(Texture.fromBitmap(new ATLAS_IMAGE_LOW_RES(), false), XML(new ATLAS_XML_LOW_RES()));

I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918). Anyone can help?

I tried to download a book I bought but failed. The error message contains "The operation couldn't be completed. (Product Integrity error 9918)". Anyone can help?

If this is something you attempted to purchase and download through the iTunes store, then contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

HT201250 My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can't be copied onto the backup disk because it appears to be read-only. How do I fix it?

My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can’t be copied onto the backup disk because it appears to be read-only. How do I fix it?

Hello,
http://pondini.org/TM/C6.html

QL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of

Dear all,
please help me4 on this
i am getting this error
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
my logs are:
sapinst.log
ERROR 2011-12-18 09:40:34.550
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
. SOLUTION: For more information, see ora_sql_results.log and the Oracle documentation.
ERROR 2011-12-18 09:40:34.558
MUT-03025 Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
ERROR 2011-12-18 09:40:34.717
FCO-00011 The step createDatabase with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
INFO 2011-12-18 09:57:09.852
An error occured and the user decided to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraDbBuild|ind|ind|ind|ind|5|0|createDatabase".
INFO 2011-12-18 09:57:15.747
Creating file /tmp/sapinst_instdir/.lastInstallationLocation.
INFO 2011-12-18 09:57:16.545
Creating file /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/__instana_tmp.xml.
oracle_sql_results.log
SQL*Plus: Release 10.2.0.4.0 - Production on Sun Dec 18 09:40:34 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
Disconnected
SAPINST: End of output of SQL executing program /oracle/PRD/102_64/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2011-12-18, 09:40:34 SAPINST ORACLE stop logging
alert_prd.log
Sun Dec 18 09:40:34 2011
Starting ORACLE instance (normal)
Sun Dec 18 09:40:34 2011
WARNING: EINVAL creating segment of size 0x000000d8001b2000
fix shm parameters in /etc/system or equivalent
please sujest the solution very urjent pz........

Dear deepak
itried to start the database manually
but it is not working.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 22: Invalid argument
SQL>
and my shm parametrs for the Solaris ACCORDING TO NOTE 724713 are
projadd -p 333 -c "SAP System PRD" \
-U prdadm,oraprd \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
dr
projmod -s \
-K "process.max-file-descriptor=(basic,65536,deny)" \
-K "process.max-sem-nsems=(priv,2048,deny)" \
-K "project.max-sem-ids=(priv,1024,deny)" \
-K "project.max-shm-ids=(priv,256,deny)" \
-K "project.max-shm-memory=(priv,18446744073709551615,deny)" \
user.root
prdadm::::project=dr;oraprd::::project=dr
thanks & Regards
k.Phani Krishna

Executable build failing with no error message with smtp email VIs

I have a VI which I want to build into a .exe which will be used as an HMI for a real-time system. I am using the SMTP VIs to text/email me various notifications about the system state. The main VI works fine if run but will not build into an .exe. The error message comes back blank so no help there (LabView 2010). If I just simply disable the portion of the code in the HMI.VI which contains the email VI code, the application builds. I searched for anwers and was unable to resolve the problem. Any ideas? Do I need to include anything in the build that is specific to the LabView SMTP VIs? I'm new to building .exe's so I appologize for any rookie mistakes I may have made.
Thanks.

mikeporter wrote:
You said you searched for answers (on the forum?).
Yes.
What did you find?
I found a bunch of topics on email send errors after the application was built but nothing related to .exe building failures (related to the SMTP/email VIs). I also found topics dicussing the bug that fails to report an (any) error during the .exe build (for 2011). The solution was to install the service pack. if that's my problem then I will have to go through the motions to get that done (corporate computers / lack of persmissons and such).
What have you tried? This question has been answered many, many, many times.
I tried what I stated in the OP. If I disable the portion of the code which contains the email SMTP VIs, the application builds, otherwise, the build fails and no error code or description is given.
PS: probably has nothing to do with the SMTP drivers, per se.
If the answer has been given many, many times, then I appologize for not being able to find it before posting. Trust me, the last thing I want to is waste my time fishing for answers on the forum, especially when I get a response from forum members who would rather point out that my mis-identified problem has been answered many, many times, rather then just helping me out.

Solaris 10 Update 1 PXE Installation on SPARC fails with the error message.

Hi,
The remote installation is continiously failing for older updates, I tried with different images but all fails with the same error message ' Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode" , the log of the same given below:-
{1} ok boot net:dhcp -v install
SC Alert: Host System has Reset
Probing system devices
Probing memory
Probing I/O buses
Sun Fire V240, No Keyboard
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
Rebooting with command: boot net:dhcp -v install
Boot device: /pci@1f,700000/network@2:dhcp File and args: -v install
1000 Mbps FDX Link up
Timed out waiting for BOOTP/DHCP reply
1000 Mbps FDX Link up
Using BOOTP/DHCP...
Using DHCP for network configuration information.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:05:58 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
<unknown>: warning: dhcpagent: daemonize: timed out awaiting adoption.
/sbin/install-discovery: /etc/inet/hosts: cannot create
Mar 17 13:06:40 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 1.
ln: cannot create /tmp/devices/devices: Operation not applicable
mount: /tmp/dev: Device busy
Configuring devices.
devfsadmd: daemon pid 28 is already running
mount: fd is already mounted or /dev/fd is busy
Using DHCP for network configuration information.
^CMar 17 13:07:00 svc.startd[7]: svc:/system/install-discovery:default: Method "/sbin/install-discovery < /dev/console > /dev/console 2>&1" failed with exit status 130.
[ system/install-discovery:default failed (see 'svcs -x' for details) ]
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
# svcs -xv
svc:/system/install-discovery:default (install-discovery)
State: maintenance since Sun Mar 17 13:07:00 2013
Reason: Start method failed repeatedly, last exited with status 130.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-install-discovery:default.log
Immediate response in this case is appreciated.
Thanks
AS

Moderator Comment:
Immediate response in this case is appreciated.No.
This is not company technical support.
If you want speedy assistance, use your contract credentials and log a support case.
No one here is paid to respond.
No one here is a company representative, nor are they responding as representatives of the company. There is no obligation that any inquiry get assistance, and your presumptive statement is bordering on being rude.

DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE

Hi Techies,
When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
MY QUESTION IS:-
IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
Kindly assist with your thoughts!1
-GK

Read the steps on note 1032311 on how to achieve it,
In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
Solution
    o Check the Homepage framework configuration.
In IMG (transaction SIMGH) go in Travel Management->Employee Self
Service->Homepages Framework->Ressources
Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
"EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
Check that the field URL for PCD file is filled with
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
l_expenses/com.sap.pct.erp.ess.tripform
Normally if it is not filled in your client, the system should use the
one from client 000, that is the SAP delivered customizing.
    o Check the Portal PCD configuration
Logon on to your SAP portal as Administrator.
In the Content Administration - Portal content, select Content
provided by SAP->end User Content->Employee Self Service->iViews->Travel
and Expenses->Display Trip Form
Right Click on Display Trip Form and Select Object->Open
In the field Application Parameters, you will find a parameter
                                                                 Page 2
sap.xss.tra.UsePdf=true . Delete this line completely.
When this configuration is done, the PDF form is desactivated and the
HTML form is used.
This is the issue with ADOBE set up
Firstly, I would ask you to check the customizing steps from 944221
to ensure no issue with the ADS configuration for the pdf form.
to review OSS note 925741 as there can be a issue with the
platform validity and version.

Rendering of Proxies in AE fails with generic error messages.

*sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
Is there anything at all I can do to make successful proxy generation less like winning the lottery?

Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
http://forums.adobe.com/message/2404464
Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs.

Automator Workflow Fails with Cryptic Error Message

I'm updating an Automator workflow for OS X Lion that I initally developed and used, without issue, in OS X Tiger. The workflow asks for a name, creates a folder for the name, takes a digital image with a Nikon D50 connected to the computer, and saves the image to the new folder. This aspect of the workflow works fine.
I then have a prompt asking if we should take another. If the user says "yes," the script should take another image and save it to the folder. This is where I run into an issue. When I attempt to add another "Take a Picture Action" into the workflow, I get the cryptic (at least to me) error message in the attached screenshot.
Here's the text:
"Cannot update for observer <AMWorkflow 0x400458ac0> for the key path "parameters.name" from <TakePicture 0x403e3b0a0>, most likely because the value for the key "parameters" has changed without an appropriate KVO notification being sent. Check the KVO-compliance of the TakePicture class."
The language of this error would seem to indicate a bug. Any thoughts on a fix or the means to report to Apple?

The subject of this post is a bit misleading. The workflow wasn't failing while I was running it, but rather when I was editing it and trying to include another 'Take a Picture' action in the same workflow.
The workaround I found was to use a 'Loop' action on the 'Take a Picture' action. It's a bit more elegant and doesn't require multiple 'Take a Picture' actions in the same workflow.
Nonetheless, what does this error message mean?

Converting Error message to warning.

Hi. I need to convert an error message that exist in SAP 4.7 to a warning message. I am doing this for IT 2001 (absences). Does anybody know where I can find the config for the error messages? Thanks.
Evie

Hi
U can do this in table V_T554S by selecting in absence inputcheck screen. Different F4 values are provided in different options just select W insted of E.
Reward me if useful
Thanks
Sheetal

Failed to convert error message

Similar Messages

Maybe you are looking for