Failed to enable TMS provisioning Extension

hi, ciscomen!
     just trying use tms provisioning extension for movi register
    Cisco TelePresence Management Suite Provisioning Extension Deployment Guide 
    http://www.cisco.com/en/US/docs/telepresence/infrastructure/tmspe/install_guide/Cisco_TMSPE_Deployment_Guide_1-0_with_14-1.pdf
   after installed TMSPE on tms server , the system got some notes and alarms and the vcs provisioning mode is "tms anent legacy “mode but
   can not switched to "provisioning" mode
the system log: 
"To enable the VCS to import provisioning data from TMS, the VCS Provisioning Mode must be set to 'Provisioning Extension'.
Configure the connection settings and the individual services first and when the status of all the services are OK, the mode can be switched to 'Provisioning Extension'
what should i do??
need your help

Hi, i am not able to see the Provisioning Mode option in Administrative tools > Configuration > General Settings.
Administrative tools > Configuration > Provisioning Extension Settings tab also is not coming. I am using TMS Version 13.2 and VCS x7.1.
Do i need to configure something to get enable the TMS Provisioning Extension Service on TMS.
Please help me.
Regards,
Nikhil Jayan

Similar Messages

  • TMS Provisioning Extension Service won't start

    Hello,
    Recently our TMS Provisioning Extension Service has failed to start.  When trying to restart the service we get the following error ...
    TMS Provisioning Extension service terminated with service-specific error 1 ( 0x1).  Nothing has changed on the server so not sure what the issue could be?                    

    Hi Andy,
    is this problem resolved?
    if not, what version of TMS and TMSPE are you running?
    what version windows server and SQL server are you running?
    have you checked the windows eventlog messages? what do they say?
    regards, Ahmad

  • TMS Provisioning Extension services: BASE GROUP Configuration Issue

    I was trying to configure the TMS Provisioning Extension services and i got stuck in Base Group Value?
    Error was getting something like the Base group value which i given was wrong. And it's asking me to check with TMS Administrator. Unfortunatly i am the one who configured the TMS also. but i didn't find something like Base Group value.
    In my scenario i have two VCS Control, two VCS Expressway, and a TMS. I have the clustering configured on both VCS Control and Expressway. and i need to use TMS Provisioning Extension Service for Cisco Movi.
    Where i can find the Base Group Configuration value?
    Regards,
    Nikhil Jayan

    Hi, i am not able to see the Provisioning Mode option in Administrative tools > Configuration > General Settings.
    Administrative tools > Configuration > Provisioning Extension Settings tab also is not coming. I am using TMS Version 13.2 and VCS x7.1.
    Do i need to configure something to get enable the TMS Provisioning Extension Service on TMS.
    Please help me.
    Regards,
    Nikhil Jayan

  • TMS Provisioning Extension not working

    I've come into a new environment with my new job and noticed that the TMS server has TMSPE installed, but when going to TMS general settings, I don't see the right dropdown. I only get Enable Cisco TMS Agents.
    I am on TMS 13.2 (looking to upgrade to the latest)
    VCS is on X7.1
    VCS is throwing TMSPE alarms all over the place.
    Base Group is not populated.

    Look over this guide, can you confirm what version of TMS you're using?  Looking at the Cisco TMSPE Deployment Guide 1.0, on pg 20 "Enabling Cisco TMSPE", it shows a different screenshot then what you've provided.  You show "Enable Cisco TMS Agents" in your screenshot, however the guide says "Provisioning Mode".
    The most current versions are TMS 14.5 and TMSPE 1.3, see Cisco TMSPE with VCS Deployment Guide 1.3 on how to upgrade your deployment.

  • SSL: Connection reset by peer ; Failed to enable crypto error while calling the report using bing API with SOAP client

    Hi,
    I am trying to fetch report using bing API and making a SOAP call for fetching the data. I get the following error:
    [Warning] fopen(): SSL: Connection reset by peer [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
    02-04-2015 10:17:41 (BST) : [Warning] fopen(): Failed to enable crypto [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
    02-04-2015 10:17:41 (BST) : [Warning] fopen(https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=rzr63XFt5qJduddohoIRyOYAP%2f1%2ftsnhk8L%2bzBmUpdU2CQlcUB98RpY%2bbOaLFFGMqAC4IUUadC%2fNdNnJqeVCY%2f%2bpy6noVsVA%2fMJp47a3Xb1VjABfKhcdKy6vqpgEdcQg%2fQZ7QcEpZ3bEloJjUtGpDquFk53BnkeHEPVWZkDYcsQegRz%2fpG4t4w6gKCCRmhArd6osr6ZU9CMJ3lbxtGXjcQEMPvP2apNyr9P%2fc8niyfWA2aBcm1aEmOLX2KL3aRJ4rz9N7gG7uBslVZH%2b4rUjHdB7CMkbb%2fHyHwvPTqGPbPCHnicefr%2b%2fDP70hlkBEGfyOOswK67%2bl1zh7CyIv%2bcMlaDsuDX1HeFf4uORfD41H1z7):
    failed to open stream: operation failed [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
    Whenever I execute my script. Can you please let me know what we can do to solve this issue. The version of PHP we are using is 5.3.3 with open ssl. 

    Hi Shobha,
    I can't confirm what version of PHP you are using, but to err on the side of caution please use the version specified in the sample/SDK:
    PHP 5.4.14 has been installed from PHP.
    Here is our code examples:
    https://msdn.microsoft.com/en-US/library/bing-ads-overview-getting-started-php-with-web-services.aspx
    Thanks,
    Itai

  • Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service. 

    Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service.  I would prefer to talk to someone directly.

    Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
    Regards,
    Ashutosh

  • Hyperion Smart View Fusion Failed to create Smart View Extension Activator

    Receving error with Office 2007, SP2 XP with SP3.
    We have done a few installs and there seems to be a problem here and there which i was able to resolve but not this one?
    exact error is upon launch of Excel , word 2007.
    Failed to create Smart View Extension Activator object. Verify that it is registered properly (-2147221164).
    Please help or suggest a solution:
    Thank you.

    Each time when I start Excel, msg box appear "Error, Failed to create Smart View Extension Activator object. Verify that it is registered properly.
    Please install the following update from Microsoft Corp.
    "MS Office 2003 update (office2003-KB907417-FullFile-ENU.exe)"
    After installing this suggested update Smart-view causes Excel crash every time it is opened.
    Smart View version 11.1.2.1.102
    MS Office 2003 SP3, Internet Explorer 7
    NOTE : Smatview functionality is working fine, but this error message is extremely annoying the users.
    We have already installed .NET 4.0 but the issue still exists.

  • How to enable php ziparchive extension in solaris 10

    Hi,
    I have to enable php_zip.so extension for my phpexcel .How could i do this without re configure php ?

    If the extension=zip.so line is not in php.ini file then you must configure php to accept this extension and restart the webserver.

  • Reason 442: Failed to Enable Virtual Adapter - Windows 7 64 bit

    Some details about the issue.
    I'm trying to connect to my client's network using VPN Client version 5.0.07.0290. The user authetication is done by providing RSA SecureID token value. After entering proper credentials, the client window gets struck at 'Securing Communication Channels...' message in status bar and reports 'Reason 442: Failed to Enable Virtual Adapter' error after few mintues. I have confirmed that this version works for other people in my team , so I'm guessing it has something to do with my system settings than the client itself.
    Below are the trobleshooting tips that I have already tried.
    1. Uninstall and Reinstall the client.
    2. Enable WinXP SP2 compatability for ipsecdialer.exe and vpngui.exe.
    3. Clicking 'Diagnose' on the Citrix Virtaul Adapter connection in Networks and Sharing centre, reports no issues.
    4. Enabling Network sharing for Local Area Network and disaling Wireless Networks
    I'm running Windows 7 64 bit Enterpise OS.
    Appreciate any suggestions to resolve this issue.
    Thanks,
    PVNSKC
    Update: 9/7/2011
    OK, things look much better after a good vacation, always!!!
    I tried to connect today by reinstalling the client after a weekend shutdown (I don't believe the cold reboot stuff, but hey, worth a try! ) and it did work. The only change I did today was to disable the Wireless Connection adapter in Networks Connections. I'm not sure whether that fixed or not cause I had tried that already. Anyway, below is my current configuration which is working for now!
    1. Below executables are running in the XP compatability mode.
    cvpnd.exe, VAInst64.exe, vpngui.exe
    2. Local Area Connection is allowed for 'Sharing'
    3.  Registry is updated with below entry.
    HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f
    4. Wireless Connection is disabled.
    Thank you all for the responses.
    PVNSKC

    Hi,
    Duplicate IP Address Triggers Error 442 on Windows 7 and Vista
    The following error "Reason 442: failed to enable virtual adapter"  appears after Windows 7 and Vista reports a duplicate IP address  detected. Subsequent connections fail with same message, but the OS does  not report a duplicate IP address detected.
    To work around error 442, do the following steps:
    Step 1 Open "Network and Sharing Center".
    Step 2 Select "Manage Network Connections".
    Step 3 Enable the Virtual Adapter ("VA"—Cisco VPN Adapter).
    Step 4 Right-click on Cisco VPN Adapter and select "Diagnose" from the context menu.
    Step 5 Select "Reset the network adapter Local Area Connection X".
    If this procedure does not work, run the following command from cmd:
    reg add HKLM\System\CurrentControlSet\Services\Tcpip\Parameters /v ArpRetryCount /t REG_DWORD /d 0 /f
    Then reboot.
    This resolves the issue until the OS reports a duplicate IP address again. Follow the preceding steps to resolve it again.
    If that doesn't work, you might have UAC enabled. If so, you must run  cmd as administrator and repeat the previous registry workaround.
    NOTE: You mentioned step 4 already, try the whole sequence again, if the steps does not work then try the registry key.
    Hope this helps,
    Sian

  • Failed to enable Virtual Adapter in Windows 8

    Hello
    I got a problem when using Cisco VPN client 5.0.04.0300 in Windows 8...today
    Error as following:
    Reason 442: Failed to enable Virtual Adapter.
    Logs here:
    1      20:48:21.787  03/01/12  Sev=Warning/3         CVPND/0xE340000C
    The Client was unable to enable the Virtual Adapter because it could not open the device.
    2      20:48:21.807  03/01/12  Sev=Warning/3         CVPND/0xE340000C
    The Client was unable to enable the Virtual Adapter because it could not open the device.
    3      20:48:21.807  03/01/12  Sev=Warning/2         IKE/0xE300009B
    Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
    4      20:48:21.807  03/01/12  Sev=Warning/2         IKE/0xE30000A7
    Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
    I'm using a laptop which belongs to the company...this is really urgent.
    Can anybody help me!!?
    Really appreciate any feedback!!!
    Snail

    thank you so much for your reply.
    I'm considering to restore to Windows 7 cuz I use those apps very offen..
    thanks again...

  • 64bit vpn client issue /error :reason -442:failed to enable virtual adapter.

    Hi All of you ,
    I m using vpn client for windows64bit  -  file name - vpnclient-winx64-msi-5.0.07.0290-k9.exe and installing it on windows 2003 server .
    But while connecting via vpn client to f/w , Virtual Adapter is taking the ip address but not connecting .getting error message on screen -
    reason -442:failed to enable virtual adapter.
    Is it possible some configuration or image issue from ASA as its first time we are trying to use 64bit OS , vpn client for 32bit OS working fine .
    Below are the logs from vpn clinet when i tried to connect to ASA5520 . Version 7.0(8) -
    Cisco Systems VPN Client Version 5.0.07.0290
    Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.
    Client Type(s): Windows, WinNT
    Running on: 5.2.3790 Service Pack 2
    Config file directory: C:\Program Files (x86)\Cisco Systems\VPN Client\
    1      15:38:03.921  01/27/11  Sev=Info/4 CM/0x63100002
    Begin connection process
    2      15:38:03.937  01/27/11  Sev=Info/4 CM/0x63100004
    Establish secure connection
    3      15:38:03.937  01/27/11  Sev=Info/4 CM/0x63100024
    Attempt connection with server "203.199.30.190"
    4      15:38:04.125  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    5      15:38:04.140  01/27/11  Sev=Info/4 CM/0x63100015
    Launch xAuth application
    6      15:38:09.515  01/27/11  Sev=Info/4 CM/0x63100017
    xAuth application returned
    7      15:38:09.515  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
    8      15:38:10.562  01/27/11  Sev=Info/4 CM/0x63100019
    Mode Config data received
    9      15:38:10.781  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to enable the 64-bit VA after timeout
    10     15:38:10.781  01/27/11  Sev=Warning/3 CVPND/0xE3400029
    The Client failed to enable the Virtual Adapter on 64-bit Windows
    11     15:38:10.781  01/27/11  Sev=Warning/2 CM/0xE310000A
    The virtual adapter failed to enable
    12     15:38:10.781  01/27/11  Sev=Info/6 CM/0x6310003A
    Unable to restore route changes from file.
    13     15:38:10.781  01/27/11  Sev=Info/6 CM/0x63100037
    The routing table was returned to original state prior to Virtual Adapter
    14     15:38:10.859  01/27/11  Sev=Info/4 CM/0x63100035
    The Virtual Adapter was disabled
    15     15:38:10.859  01/27/11  Sev=Warning/2 IKE/0xE300009B
    Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
    16     15:38:10.859  01/27/11  Sev=Warning/2 IKE/0xE30000A7
    Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
    17     15:38:11.546  01/27/11  Sev=Info/4 CM/0x63100012
    Phase 1 SA deleted before first Phase 2 SA is up cause by "Unknown".  0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    18     15:38:11.546  01/27/11  Sev=Info/5 CM/0x63100025
    Initializing CVPNDrv
    19     15:38:11.578  01/27/11  Sev=Info/6 CM/0x63100046
    Set tunnel established flag in registry to 0.
    20     15:38:40.953  01/27/11  Sev=Info/4 CM/0x63100002
    Begin connection process
    21     15:38:40.953  01/27/11  Sev=Warning/2 CVPND/0xA3400019
    Error binding socket: -21. (DRVIFACE:1234)
    22     15:38:40.968  01/27/11  Sev=Info/4 CM/0x63100004
    Establish secure connection
    23     15:38:40.968  01/27/11  Sev=Info/4 CM/0x63100024
    Attempt connection with server "203.199.30.190"
    24     15:38:41.156  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    25     15:38:41.171  01/27/11  Sev=Info/4 CM/0x63100015
    Launch xAuth application
    26     15:39:08.031  01/27/11  Sev=Info/4 CM/0x63100017
    xAuth application returned
    27     15:39:08.046  01/27/11  Sev=Info/4 CM/0x6310000E
    Established Phase 1 SA.  1 Crypto Active IKE SA, 1 User Authenticated IKE SA in the system
    28     15:39:09.093  01/27/11  Sev=Info/4 CM/0x63100019
    Mode Config data received
    29     15:39:09.312  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    30     15:39:09.312  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    31     15:39:19.937  01/27/11  Sev=Warning/3 CVPND/0xA340000D
    The virtual adapter was not recognized by the operating system.
    32     15:39:19.937  01/27/11  Sev=Warning/2 CM/0xE310000A
    The virtual adapter failed to enable
    33     15:39:19.937  01/27/11  Sev=Info/6 CM/0x6310003A
    Unable to restore route changes from file.
    34     15:39:19.937  01/27/11  Sev=Info/6 CM/0x63100037
    The routing table was returned to original state prior to Virtual Adapter
    35     15:39:20.109  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    36     15:39:20.109  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    37     15:39:20.281  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    38     15:39:20.281  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    39     15:39:20.578  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    40     15:39:20.578  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    41     15:39:20.953  01/27/11  Sev=Warning/2 CVPND/0xE340002C
    Unable to disable the 64-bit VA after timeout
    42     15:39:20.953  01/27/11  Sev=Warning/3 CVPND/0xE340002A
    The Client failed to disable the Virtual Adapter on 64-bit Windows
    43     15:39:21.437  01/27/11  Sev=Info/4 CM/0x63100035
    The Virtual Adapter was disabled
    44     15:39:21.437  01/27/11  Sev=Warning/2 IKE/0xE300009B
    Failed to active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)
    45     15:39:21.437  01/27/11  Sev=Warning/2 IKE/0xE30000A7
    Unexpected SW error occurred while processing Quick Mode negotiator:(Navigator:2263)
    46     15:39:22.046  01/27/11  Sev=Info/4 CM/0x63100012
    Phase 1 SA deleted before first Phase 2 SA is up cause by "Unknown".  0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system
    47     15:39:22.046  01/27/11  Sev=Info/5 CM/0x63100025
    Initializing CVPNDrv
    48     15:39:22.062  01/27/11  Sev=Info/6 CM/0x63100046
    Set tunnel established flag in registry to 0.
    release notes for vpn client 64bit  -
    http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

    Hi Anisha ,
    Exact version of OS is "Microsoft Windows Server 2003 x64"  .
    I need supported cisco vpn client for this OS .
    =========
    Thanx 4 reply .
    Raj

  • Failed to create Smart View Extension Activator when launching MS Excel

    Hi
    I am using EPM Planning 11.1.2.1.
    We have installed Smartview on client (MS Office 2003). No error on installation.
    But when we launch MS Excel, we have the following error message :
    Failed to create Smart View Extension Activator object. Verify that it is (registered) properly
    Please install the following update of Microsoft Corporation :
    MS Office 2003 Update (office 2003-KB907417-FullFile-ENU.exe)
    We have installed the KB907417 MS Office update, but we still have the same error message.
    Thanks in advance for your help
    Fanny

    Fanny,
    One more reason that i can think is Office shared feature that comes along with office suite which is needed for installing office addins. Could you please verify in your system if office shared features is installed.
    to check: Add or remove programs->microsoft office->change->add/remove feature-> you can see the list of office stuffs installed on the machine. Just check if "office shared feature" is present.

  • 442 Error - Failed to enable Virtual Adapter

    Windows 8, I am  trying to connect on VPN and I only receive this error : 442 - Failed to enable Virtual Adapter.

    Install Citrix Deterministic Network Enhancer to solve Cisco IPSec VPN issue with Windows 8/8.1. Check below guide,
    http://www.vmwareandme.com/2013/12/solved-windows-8-and-windows-81-cisco.html
    www.mytricks.in

  • Gem::Ext::BuildError: ERROR: Failed to build gem native extension.

    I can't install gem pg:
    Gem::Ext::BuildError: ERROR: Failed to build gem native extension.
    /home/alex/.rvm/rubies/ruby-2.1.1/bin/ruby extconf.rb
    checking for pg_config... no
    No pg_config... trying anyway. If building fails, please try again with
    --with-pg-config=/path/to/pg_config
    checking for libpq-fe.h... no
    Can't find the 'libpq-fe.h header
    *** extconf.rb failed ***
    Could not create Makefile due to some reason, probably lack of necessary
    libraries and/or headers. Check the mkmf.log file for more details. You may
    need configuration options.
    Provided configuration options:
    --with-opt-dir
    --without-opt-dir
    --with-opt-include
    --without-opt-include=${opt-dir}/include
    --with-opt-lib
    --without-opt-lib=${opt-dir}/lib
    --with-make-prog
    --without-make-prog
    --srcdir=.
    --curdir
    --ruby=/home/alex/.rvm/rubies/ruby-2.1.1/bin/ruby
    --with-pg
    --without-pg
    --with-pg-config
    --without-pg-config
    --with-pg_config
    --without-pg_config
    --with-pg-dir
    --without-pg-dir
    --with-pg-include
    --without-pg-include=${pg-dir}/include
    --with-pg-lib
    --without-pg-lib=${pg-dir}/lib
    extconf failed, exit code 1
    Gem files will remain installed in /home/alex/.rvm/gems/ruby-2.1.1/gems/pg-0.17.1 for inspection.
    Results logged to /home/alex/.rvm/gems/ruby-2.1.1/extensions/x86_64-linux/2.1.0/pg-0.17.1/gem_make.out
    In Ubuntu I can do this
    $ sudo apt-get install ruby-dev build-essential
    and it will the same issue. But in Arch I can't because these don't exist.
    I also have libmariadbclient installed.

    You can do:
    Step1: You choose "Tools" -> Library Manager -> J2ME Ant Extension
    Step2: in tab Classpath, you remove "C:\Program Files\netbeans-5.5\mobility7.3\modules\org-netbeans-modules-kjava-antext.jar"
    Step3: You add again "C:\Program Files\netbeans-5.5\mobility7.3\modules\org-netbeans-modules-kjava-antext.jar"
    Step4: Then you build your application again.
    It'll build normally.
    I tried.

  • AGPDMA fails to enable for unknown reasons

    This seems to happen on a semi-random basis... Either it doesn't happen to begin with and never happens again, or it happens when I first use Xorg and sticks around for a while, possibly disappearing, possibly not. As of yet, I haven't found any cause or any solution. I just get this message in Xorg.0.log:
    (EE) VIA(0): [drm] drmAgpAcquire failed 1023
    (EE) VIA(0): [drm] Failed to initialize DMA ring-buffer: 1005
    and AGPDMA fails to enable, reducing OpenGL performance very significantly. This happens with both the Via and Unichrome drivers. Has anyone else experienced this, and is there any way around it?

    That little yellow triangle icon means that the DVR detected a conflict in your scheduled recordings or a recording was "bumped due to deletion". 
    In the first case either there was an overlap with the other 2 recordings or something was causing the DVR to think that it should try to record 3 things (or more) at once - maximum of 2 simultaneous recordings allowed.
    In the second case, it is possible the guide data changed and the program is no longer listed - remember that the DVR is a program based system, not time slot, and Verizon's guide tends to be wrong a lot.
    One way to assure your recordings is to set them up as recurring manual recordings as opposed to a specific show.
    Hope that helps.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Maybe you are looking for