Failed to execute script
Hello
I have created a script in the open script, and I tried it in the load test while running it is showing error as...
"ScriptException occured. An unexpected exception occurred in the... " what may the cause.....?
can any one suggest me...
Regards
srinivas
Hi
My application is a oracle/ebs form which call the forms through servlet in the web , I created the script in open script through record mode and i loaded in load test(controller) form which runs the application but it has shown the above error .
So what i have to do now..
please suggest me
Regards
Srinivas
Similar Messages
-
[SOLVED]Crontab fails to execute script
Good morning.
I have tried to setup crontab to give my ati card a different clockspeed depending on the time of day. I can't get it to work properly. This is what I have done.
I have 3 scripts in my ~/bin folder for 3 different clocks. This is one example, I call this upclock.sh.
#!/bin/bash
export DISPLAY=:0
/usr/bin/aticonfig --odsc 895,300
If I execute it from the commandline, as a normal user, it works as expected and the clock is changed. This goes for all 3 scripts.
I add these to roots crontab like this:
15 23 * * * `DISPLAY=:0 /home/johan/bin/downclock.sh`
0 3 * * * `DISPLAY=:0 /home/johan/bin/midclock.sh`
0 7 * * * `DISPLAY=:0 /home/johan/bin/upclock.sh`
But, I get the following error mail when the times specified comes:
No protocol specified
/bin/sh: ERROR: command not found
Anyone got a hint on what to do to make it work? I have tried to remove the "DISPLAY=:0", with the same result.
Last edited by kveras (2011-06-28 12:40:14)fukawi2 wrote:
15 23 * * * `DISPLAY=:0 /home/johan/bin/downclock.sh`
0 3 * * * `DISPLAY=:0 /home/johan/bin/midclock.sh`
0 7 * * * `DISPLAY=:0 /home/johan/bin/upclock.sh`
You don't want to use backticks around your commands. Start by removing them.
Oh, I picked those up from a similar crontab on the gentoo forums, don't know why. I removed them and I now get another message.
No protocol specified
ERROR - X needs to be running to perform ATI Overdrive(TM) commands
However, X is running, initiated by SLIM as normal user "johan".
I tried using the user johan's crontab instead:
15 23 * * * DISPLAY=:0 /home/johan/bin/downclock.sh
0 3 * * * DISPLAY=:0 /home/johan/bin/midclock.sh
0 7 * * * DISPLAY=:0 /home/johan/bin/upclock.sh
This works just fine!
Thank you for pointing me in the right direction. -
Execute Script - How to Update second node in XML group
Hi,
I have an XML variable "myXML" which is set to:
<root>
<nodes>
<node>
<value>a</value>
</node>
<node>
<value>b</value>
</node>
</nodes>
</root>
Question - within an Execute script, how can I easily access and update the second node value? i.e. change "b" to "c"
The following fails in Execute Script (although it is possible using an XPath expression in a SetValue
patExecContext.setProcessDataValue("/process_data/myXML/root/nodes/node[1]/value", "c");
If I have square brackets in this expression then it fails with a nasty error
Is there an easy way?I tired your script in my sandbox and its working fine without fail.
I noticed an additional space in your xpath expression
patExecContext.setProcessDataValue("/process_data/myXML/root/nodes/no de[1]/value", "c");
Can you remove the space within node tag and try again?
Nith -
FJS-00012 ERROR while executing script in start SAP system
Hi experts,
I am getting error in the Oracle preload actions while installing the SAP 4.7 using the ORacle 9.2.0.1..
FJS-00012 Error when executing script in start SAP system(post processing)
My comp configuration is as follows:
160 gb hard disk
RAM 1GB
OS: win 2003 server enterprise edition
oracle 8.1.7
During the Database Load (post processing) section of the
installation, i get an error and the installation fails.
I am giving all the logs here including the trace log and the
Sapview.log file ans sapinst.
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511002459
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -ctf I E:\db3\EXPORT3/DATA/SAPVIEW.STR C:\SAPinst ORACLE KERNEL/DDLORA.TPL C:\SAPinst ORACLE KERNEL/SAPVIEW.TSK ORA -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -o D
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511002500
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: START OF LOG: 20070511070423
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#5 $ SAP
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ESA\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst ORACLE KERNEL/SAPVIEW.cmd -l C:\SAPinst ORACLE KERNEL/SAPVIEW.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora81 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPESA's password
DbSl Trace: Connecting as /@ESA on connection 0 ...
DbSl Trace: Attaching to DB Server ESA (con_hdl=0,svchp=002BD418,svrhp=002BD224)
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPESA/<pwd>@ESA on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=002BD418,srvhp=002BD224,usrhp=00304E94)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance esa is running on MALTI with ORACLE version 8.1.7.4.1 since 20070511
(DB) INFO: connected to DB
(DB) INFO: /SAPTRX/A_CONDF4 created
(DB) INFO: /SAPTRX/VDASFEV created
(DB) INFO: /SAPTRX/VDASFPAR created
(DB) INFO: /SAPTRX/VD_AOMIL created
(DB) INFO: /SAPTRX/VD_AOPAC created
(DB) INFO: /SAPTRX/VD_AOPAE created
(DB) INFO: /SAPTRX/VD_AOPAI created
(DB) INFO: /SAPTRX/VD_AOPAR created
(DB) INFO: /SAPTRX/VD_AOTD1 created
(DB) INFO: /SAPTRX/VD_AOTD2 created
(DB) INFO: /SAPTRX/VD_AOTDD created
(DB) INFO: /SAPTRX/VD_AOTYP created
(DB) INFO: /SAPTRX/VD_ASPAR created
(DB) INFO: /SAPTRX/VD_CONDL created
(DB) INFO: /SAPTRX/V_AODD02 created
(DB) INFO: /SAPTRX/V_DD03 created
(DB) INFO: /SAPTRX/V_DD03X created
(DB) INFO: /SDF/SMODICOMP created
(DB) INFO: /SDF/SMODIDEVC created
(DB) INFO: /SDF/UMOD_COMP created
(DB) INFO: ACEPSOIT_UPD created
(DB) INFO: ADJV_TRANS_DIF created
(DB) INFO: AFFWV0 created
(DB) INFO: AFKO_LAUFN created
(DB) INFO: AFSPLIT created
(DB) INFO: AFVCP created
(DB) INFO: ALM_ME_T003O_IS created
(DB) INFO: ALM_ME_T350I created
(DB) INFO: ALM_ME_TQ80_T created
(DB) INFO: ANEKPV created
(DB) INFO: APOUPD created
(DB) INFO: APPL_DEVC created
(DB) INFO: APPL_DIAL created
(DB) INFO: APPL_DOMA created
(DB) INFO: APPL_DTEL created
(DB) INFO: APPL_ENQU created
(DB) INFO: APPL_FUGR created
(DB) INFO: APPL_FUGRG created
(DB) INFO: APPL_FUNC created
(DB) INFO: APPL_INDX created
(DB) INFO: APPL_MCOB created
(DB) INFO: APPL_MENU created
(DB) ERROR: DDL statement failed
(CREATE VIEW "APPL_MODS" ( "NAME" , "TYP" , "MEMBER" , "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X')
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=002BD418,usrhp=00304E94)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=002BD418,srvhp=002BD224)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ESA\SYS\exe\run/R3load.exe: END OF LOG: 20070511070433
SAPINST
INFO 2007-05-10 23:59:05
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-05-10 23:59:16
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
INFO 2007-05-10 23:59:21
Copying file E:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2007-05-10 23:59:21
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/ORA/DBSIZE.XML to: DBSIZE.XML.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.XML.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/ORA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:52
Copying file E:/db1/EXPORT1/DB/DDLORA.TPL to: DDLORA.TPL.
INFO 2007-05-11 00:01:52
Creating file C:\SAPinst ORACLE KERNEL\DDLORA.TPL.
INFO 2007-05-11 00:01:52
Copying file system node E:\db1\EXPORT1/DB/DDLORA.TPL with type NODE to DDLORA.TPL succeeded.
INFO 2007-05-11 00:01:52
Processing of all file system node operations of table tORA_filecopy succeeded.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/DDLORA.TPL to: orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:01:57
Moving file C:/SAPinst ORACLE KERNEL/changed_ddl_ora_tmp.tpl to: DDLORA.TPL.
INFO 2007-05-11 00:01:57
Removing file C:/SAPinst ORACLE KERNEL/orig_ddl_ora_tmp.tpl.
INFO 2007-05-11 00:03:00
Package table created
PHASE 2007-05-11 00:04:15
SAP R/3 Enterprise 4.70 for Oracle
PHASE 2007-05-11 00:04:15
SAP Web Application Server
PHASE 2007-05-11 00:04:15
Request common parameters of SAP System
PHASE 2007-05-11 00:04:15
Create operating system accounts
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/keydb.xml to: C:/SAPinst ORACLE KERNEL/keydb.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\keydb.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.xml to: C:/SAPinst ORACLE KERNEL/OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.1.xml.
INFO 2007-05-11 00:04:15
Copying file C:/SAPinst ORACLE KERNEL/DBSIZE.XML to: C:/SAPinst ORACLE KERNEL/DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Creating file C:\SAPinst ORACLE KERNEL\DBSIZE.1.XML.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1004 ACCOUNTNAME=malti\SAP_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1005 ACCOUNTNAME=malti\SAP_ESA_LocalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Local Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1006 ACCOUNTNAME=malti\SAP_ESA_GlobalAdmin ACCOUNTTYPE=GROUP DESCRIPTION=SAP Global Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1007 ACCOUNTNAME=ORA_ESA_DBA ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Operator Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1008 ACCOUNTNAME=ORA_ESA_OPER ACCOUNTTYPE=GROUP CONDITION=YES DESCRIPTION=Database Administration Group MEMBERSHIPSEPARATOR=, OPMODE=CREATE succeeded.
INFO 2007-05-11 00:04:15
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1009 ACCOUNTNAME=malti\esaadm ACCOUNTTYPE=USER DESCRIPTION=SAP System Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,malti\Users,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Changing account ACCOUNTID=S-1-5-21-1488183395-3813774055-1856681103-1010 ACCOUNTNAME=malti\SAPServiceESA ACCOUNTTYPE=USER CONDITION=YES DESCRIPTION=SAP System Service Administrator MEMBERSHIP=malti\SAP_ESA_GlobalAdmin,Administrators,ORA_ESA_DBA,ORA_ESA_OPER,malti\SAP_LocalAdmin,malti\SAP_ESA_LocalAdmin MEMBERSHIPSEPARATOR=, OPMODE=CREATE USERPASSWORD=*... succeeded.
INFO 2007-05-11 00:04:18
Processing of all account operations of table t_SAPComponent_Accounts_Accounts_SHARED succeeded (operation CREATE).
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:18
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
PHASE 2007-05-11 00:04:19
Request operating system user information
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1488183395-3813774055-1856681103-500' on host 'malti'!
INFO 2007-05-11 00:04:20
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
INFO 2007-05-11 00:04:21
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:04:22
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa_16 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\esa620_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\esa620_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\esa620_2.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\esa620_2 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\esa620_3.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\esa620_3 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_4.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_4 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata4\esa620_5.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata4\esa620_5 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_6.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_6 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata5\esa620_7.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata5\esa620_7 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_8.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_8 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esa620_9.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esa620_9 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata6\esausr_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata6\esausr_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata2\roll_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata2\roll_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata3\temp_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata3\temp_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Creating directory D:\oracle\ESA\sapdata1\system_1.
INFO 2007-05-11 00:05:39
Creating file system node D:\oracle\ESA/sapdata1\system_1 with type DIRECTORY succeeded.
INFO 2007-05-11 00:05:39
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_DatabaseServerNodes succeeded.
INFO 2007-05-11 00:05:40
Processing of all file system node operations of table tORA_SapdataNodes succeeded.
INFO 2007-05-11 00:05:41
Creating file D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:42
Creating file D:\oracle\ora81\database\initESA.sap.
INFO 2007-05-11 00:05:43
Copying file E:/KERNEL/NT/COMMON/INSTALL/INITSID.DBA to: D:\oracle\ora81/database/initESA.dba.
INFO 2007-05-11 00:05:43
Creating file D:\oracle\ora81\database\initESA.dba.
INFO 2007-05-11 00:05:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:45
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:45
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:05:45
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:05:46
Creating file C:\SAPinst ORACLE KERNEL\oradim.log.
INFO 2007-05-11 00:05:51
See 'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' output in 'C:\SAPinst ORACLE KERNEL\oradim.log'.
INFO 2007-05-11 00:05:51
'D:\oracle\ora81/bin/oradim -new -sid ESA -STARTMODE auto' returned with '0'.
INFO 2007-05-11 00:05:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:05:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:06:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:31
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:31
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:07:31
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:07:32
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:07:34
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:08:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:09:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:10:44
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:20
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:11:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:35
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:12:37
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:13
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:51
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:13:53
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:29
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:14:31
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:09
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:11
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:48
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:15:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:26
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:16:28
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:04
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:17:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:18:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:39
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:19:42
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:21
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:20:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:02
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:05
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:21:45
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:24
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:22:27
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:06
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:47
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:50
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:54
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:23:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:12
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:15
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:41
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:43
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:46
Moving file D:/oracle/ora81/database/initESA.ora to: orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Moving file C:/SAPinst ORACLE KERNEL/changed_init_ora_tmp.txt to: D:\oracle\ora81\database\initESA.ora.
INFO 2007-05-11 00:24:46
Removing file C:/SAPinst ORACLE KERNEL/orig_init_ora_tmp.txt.
INFO 2007-05-11 00:24:46
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:47
See 'D:\oracle\ora81/bin/lsnrctl stat' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:47
'D:\oracle\ora81/bin/lsnrctl stat' returned with '3'.
INFO 2007-05-11 00:24:47
Creating file C:\SAPinst ORACLE KERNEL\lsnrctl.log.
INFO 2007-05-11 00:24:48
See 'D:\oracle\ora81/bin/lsnrctl start' output in 'C:\SAPinst ORACLE KERNEL\lsnrctl.log'.
INFO 2007-05-11 00:24:48
'D:\oracle\ora81/bin/lsnrctl start' returned with '0'.
INFO 2007-05-11 00:24:49
Copying file E:/KERNEL/NT/COMMON/INSTALL/ORADBUSR.SQL to: ./oradbusr.sql.
INFO 2007-05-11 00:24:49
Creating file C:\SAPinst ORACLE KERNEL\oradbusr.sql.
INFO 2007-05-11 00:24:49
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:52
Changed working directory to C:\SAPinst ORACLE KERNEL.
PHASE 2007-05-11 00:24:54
Database Load
INFO 2007-05-11 00:24:56
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:57
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:58
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:24:59
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:00
Task files created
INFO 2007-05-11 00:25:00
Command files created
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 00:25:01
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:18:03
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPAPPL1.log
INFO 2007-05-11 02:18:03
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 02:44:07
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPSSEX2.log
INFO 2007-05-11 02:44:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 03:55:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:25:07
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:42:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:47:08
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:55:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:57:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 04:59:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:01:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:03:22
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:04:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 05:05:23
Changed working directory to C:\SAPinst ORACLE KERNEL.
INFO 2007-05-11 07:04:33
Changed working directory to C:\SAPinst ORACLE KERNEL.
ERROR 2007-05-11 07:04:33
MSC-01015 Process finished with error(s), check log file C:\SAPinst ORACLE KERNEL/SAPVIEW.log
ERROR 2007-05-11 07:04:33
FJS-00012 Error when executing script.
THANKS ALLL IN ADVANCE,
Regards,
Maltino space left on devices...
==> "<b>MOS-01109 Needed space on mountpoint F:/ is 5.248e07 KB, but got only 4.26433e07 KB.</b>"
and others...
-> provide more space and restart
GreetZ, AH -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28 Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29 Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0x00000004 Source: Checking Alcon Files Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0xC0024107
Source: Checking Alcon Files Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advanceAre you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all. -
FJS-00012 Error when executing script.
Folks, please i need help, i'm installing sap on oracle 9.2
SYSID CBT, this is SAP 4.71. It stops on the "creating or registering SAP Services (post processing)" phase, and inside the file SAPSTARTSRV.EXE.log it's just the word SERVICE NOT STARTED.
here is the error message
==========
Creating file K:\usr\sap\trans\bin\tpparam_instCBT.
PHASE 2011-03-14 18:41:36
Deal with services
PHASE 2011-03-14 18:41:36
Prepare dealing with SAP System services
INFO 2011-03-14 18:41:36
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:41:48
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:41:48
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:41:48
FJS-00012 Error when executing script.
INFO 2011-03-14 18:42:05
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:42:52
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:42:52
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:42:52
FJS-00012 Error when executing script.
INFO 2011-03-14 18:48:37
Creating file S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-14 18:48:44
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst ORACLE SAPINST\SAPSTARTSRV.EXE.log'.
ERROR 2011-03-14 18:48:44
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS10_SNGCBT1 -s CBT -n 10 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
ERROR 2011-03-14 18:48:44
FJS-00012 Error when executing script.
=============
what can i do?
cheers.Hi, i installed the vcredist_x86 patch but nothing happened. I'm running a windows 2000 advanced server on a virtual machine with 3 GB of RAM and a lot of space.
When i tried to start the services manually from service.exe it shows me the on windows eventviewer:
Initialization failed. Service not started. [ntservmain.cpp 1002]
and then
The dynamic link library librfc32.dll could not be loaded
And here is the message from the sapinst
***** Transaction begin ********************************************************
TRACE
Processing Row[0] WapsSystemName="CBT" WapsInstanceName="DVEBMGS00" WapsInstanceHost="SNGCBT1" Key="WAPS_SAPsidInstNum_Service" Program="K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE" ProgramArguments="-r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm" ArgumentSeparator=" " ProgramReturnCode="255"
TRACE<i>
Copying file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log to: S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.12.log.
TRACE<i>
Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.12.log.
TRACE<i>
Removing file S:/SAPinst_ORACLE_SAPINST/SAPSTARTSRV.EXE.log.
INFO 2011-03-15 14:47:21
Creating file S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log.
INFO 2011-03-15 14:47:29
See 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' output in 'S:\SAPinst_ORACLE_SAPINST\SAPSTARTSRV.EXE.log'.
TRACE
ProgramReturnCode='-1' means error.
ERROR 2011-03-15 14:47:29
MOS-01012 PROBLEM: 'K:\usr\sap\CBT\SYS\exe\run\SAPSTARTSRV.EXE -r -q -p K:\usr\sap\CBT\SYS\profile\START_DVEBMGS00_SNGCBT1 -s CBT -n 00 -U HCB\SAPServiceCBT -P sap4life -e HCB\cbtadm' returned with '-1' which is not a defined as a success code.
***** Transaction end **********************************************************
So Please can someone help me.
regards -
Add-DhcpServerInDC failes in Remoting Script
Hello everyone,
I am currently scripting the installation of two DHCP servers for a Windows Server 2012R2 DHCP failover cluster.
I used the technet description on how to do it.
Unfortunately the authorization of the server fails when executing the script (The script is run remotely via Invoke-Command with Domain Admin credentials):
Write-Host "Authorizing the DHCP server in the Active Directory"
if (Add-DhcpServerInDC) {
I have a transcript running on the remote machines that shows the following:
PS>TerminatingError(Add-DhcpServerInDC): "Failed to initialize directory service resources for domain <domain>."
When executing the Add-DhcpServerInDC command locally on the server (same user and elevated shell) I also get a warning, but the server is added (as verified with Get-DhcpServerInDC)
WARNING: The DHCP server dedam-sv0485.corp.grimme.com with IP address 10.0.202.154 has been successfully authorized in
Active Directory. Failed to initiate the authorization check on the DHCP server. Error: Access is denied. (5).
Does anyone have an idea why the two errors occur?
Thanks in advance :)But that makes no sense to me, there are two packages, one called test with HelloSayer.java in it, the other called twitter with Tweets.java in it. I made the new destination in the xml by saying twitter.Tweets instead of test.HelloSayer, is there anything else I need to change? Like scope change to something else besides application?
-
Executing script: Memory Script
Hi all, I am trying to clone my database ( 9.2.0.1.0) in same system (Red Hat Enterprise Linux AS release 4), but its hung before finishing...
media recovery complete
Finished recover at 25-APR-08
printing stored script: Memory Script
shutdown clone;
startup clone nomount ;
executing script: Memory Script
This is the last few messeges I got...
Nishant SanthanHi Nishant,
I also faced the same thing during cloning, then I followed as...
contents of Memory Script:
shutdown clone;
startup clone nomount ;
executing Memory Script
Now go to the stby db opened in other screen. do
stby> alter database open;
here in C:> prompt you will get the following msg...
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 04/11/2008 16:04:35
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-00444: background process
"" failed while starting
...now exit from RMAN> and startup stby DB from sql>
You try this, I hope it will come as my one worked.
Regards -
Device air player fails to execute AS2 SWF
Device air player fails to execute AS2 SWF
This problem happens on device air player (installed from google Android market), but does occur on emulator.
The problem:
==========
When a apk file contains AS2 swf (AVM1 movie), script in that swf will not be executed.
How to produce:
==========
1) I have a AS2 swf called Main.swf
2) I use the following Main-app.xml file:
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/2.5">
<id>Main</id>
<filename>Main</filename>
<name>Main-debug</name>
<versionNumber>0.0.0</versionNumber>
<initialWindow>
<content>Main.swf</content>
<autoOrients>false</autoOrients>
<fullScreen>false</fullScreen>
<visible>false</visible>
</initialWindow>
</application>
3) use the following adt command to package an apk file
adt -package -target apk -storetype pkcs12 -keystore c:\cert.p12 myApp.apk Main-app.xml Main.swf
4) install and run myApp.apk on a device (HTC Desire, Android 2.2, Air 2.5). Main.swf is loaded and played. But scripts in the swf file are not execute
I have tried a couple of AS2 swf files, none of them works correctly on the device. But all of them work correct in the Android emulator come with Flash Builder.
I hope there is a way to make them work on the device!
Please HELP!!Thanks again for looking into this so quickly, Chris. [I emailed Chris directly]
I did just dig up these tidbits:
http://kb2.adobe.com/cps/868/cpsid_86822.html
which states: In AIR for Android, you can use the Loader class to load a SWF file and execute its code. (However, ActionScript 2.0 is not supported.) AIR applications for the iPhone cannot execute code in loaded SWF content; AIR for Android does not include this restriction.
And this, which also indicates that AS2 is not supported in Mobile, but is on every other device (including TV):
http://help.adobe.com/en_US/air/build/WS144092a96ffef7cc16ddeea2126bb46b82f-8000.html
AS2 sure would be handy for mobile as well!
Thanks again,
Kirk -
Grid Installer Wizard step 9 of 10 - execute script root.sh problem
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6)
and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
The Virtual Disk for each VM is 20 GB whose raw device is /dev/sda (partition /dev/sda1 is the same size).
In order to install Grid Infrastructure, I add 5 Hard Disks into the first VM rac1 and 10GB for each Hard Disk.
Then create 5 ASM disks respectively as a Disk Group. Let me describe them as follows:
OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
Corresponding raw devices: /dev/sdb (sdc sdd sde sdf)
Corresponding partition: /dev/sdb1 (sdc1 sdd1 sde1 sdf1)
Corresponding ASM disk: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
When I run Grid installer step 5 of 8, I select all of 5 ASMDISK as ASM disk group in the Wizard.
The clusterware files are supposed to be stored in the ASM disk group.
The 2 VMs rac1 and rac2 should use the same ASM disk group.
By here, I don't do anything regarding ASM disk group in the second VM rac2.
When run the Grid Installer step 9 of 10, execute script root.sh in the 2 VMs rac1 and rac2. The script root.sh runs in the first VM rac1 successfully. But when the script root.sh runs in the second VM rac2, the error message comes up as following:
ORA-15018: disk group cannot be created.
ORA-15031: disk specification 'ORCL:ASMDISK5' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK4' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK3' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK2' matches no disks.
ORA-15031: disk specification 'ORCL:ASMDISK1' matches no disks.
Configuration of ASM failed.
Did not successfully configure and start ASM.
Initial cluster configuration failed.
From the above error message, it seems that we need to connect the second VM rac2 with the ASM disk group created in rac1 so that 2 VMs use the same set of the ASM disks.
But I don't see anything about doing ASM disk group in the second VM rac2 in the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html.
My question is:
Do any folk understand how to solve ASM disks issue in the second VM rac2 when run the script root.sh in rac2 on step 9 of 10 in Installer Wizard ?
Thanks.Hi,
One of mandatory requirement for RAC is shared storage. Check if you have shared storage across all nodes.
Run oracleasm listdisk on node2 to see if it can see the same disks on node 1. Otherwise you didn't follow that tutorial correctly
Cheers -
error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
successHi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support -
XPath expression failed to execute.
Hi Everybody ,
I am working AIA PIP 3.1 for JDE E1.I am facing some errors so that i can't proceed.
See the log errors as below:
javax.xml.ws.soap.SOAPFaultException: XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is ora:processXSLT('xsl/Xform_BillOfMaterialsListABM_to_BillOfMaterialsListAXML.xsl',bpws:getVariableData('InitialLoadBillOfMaterialsListReqMsg','InitialLoadBillOfMaterialsList'),bpws:getVariableData('Parameters')). The XPath expression failed to execute; the reason was: oracle.fabric.common.xml.xpath.XPathFunctionException: javax.xml.transform.TransformerException: oramds:/deployed-composites/default/InitialLoadBillOfMaterialsListJDEE1toAgileImpl_rev1.0/xsl/Xform_BillOfMaterialsListABM_to_BillOfMaterialsListAXML.xsl<Line 18, Column 271>: XML-22044: (Error) Extension function error: Error invoking 'lookupXRef':'oracle.tip.xref.exception.RepositoryException: lookup could not find values in column name "AGILE_01" for table name "oramds:/apps/AIAMetaData/xref/ITEM_ITEMID.xref" using reference column name "JDEE1_01" and reference value "731882::M30" Please ensure lookup criteria has a match.'. Check the detailed root cause described in the exception message text and verify that the XPath query is correct.
Please reply me ASAP,
Waiting for your response.....
Regards
Jyoti NayakHi,
Ya i checked the data for same table,but i didn't get any XREF related information in xref_data table.
Did you mean that, data should already present under AIAFPINST_XREF.Probably xref is meant for storing dynamic value.
Please check the above error and reply me soon.
With Regards
Jyoti Nayak -
[Solved] "slim: failed to execute login command" after awesomewm updat
Hi,
i updated some weeks ago via pacman -Syu, where also awesome wm was updated from 3.4.* to 3.5.* so I updated my rc.lua as it is told on their wiki, but i cant login with my rc.lua anymore i got the failed to execute login command error from slime. If i use the shipped efault rc.lua it works fine, can someone help me to figure out whats wrong with my rc.lua?
-- Standard awesome library
local gears = require("gears")
local awful = require("awful")
awful.rules = require("awful.rules")
require("awful.autofocus")
-- Widget and layout library
local wibox = require("wibox")
-- Theme handling library
local beautiful = require("beautiful")
-- Notification library
local naughty = require("naughty")
local menubar = require("menubar")
local vicious = require("vicious")
function fullscreens(c)
awful.client.floating.toggle(c)
if awful.client.floating.get(c) then
local clientX = screen[1].workarea.x
local clientY = screen[1].workarea.y
local clientWidth = 0
-- look at http://www.rpm.org/api/4.4.2.2/llimits_8h-source.html
local clientHeight = 2147483640
for s = 1, screen.count() do
clientHeight = math.min(clientHeight, screen[s].workarea.height)
clientWidth = clientWidth + screen[s].workarea.width
end
local t = c:geometry({x = clientX, y = clientY, width = clientWidth, height = clientHeight})
else
--apply the rules to this client so he can return to the right tag if there is a rule for that.
awful.rules.apply(c)
end
-- focus our client
client.focus = c
end
-- {{{ Error handling
-- Check if awesome encountered an error during startup and fell back to
-- another config (This code will only ever execute for the fallback config)
if awesome.startup_errors then
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, there were errors during startup!",
text = awesome.startup_errors })
end
-- Handle runtime errors after startup
do
local in_error = false
awesome.connect_signal("debug::error", function (err)
-- Make sure we don't go into an endless error loop
if in_error then return end
in_error = true
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, an error happened!",
text = err })
in_error = false
end)
end
-- {{{ Variable definitions
-- Themes define colours, icons, and wallpapers
-- beautiful.init("/home/kili/Repositories/awesome-themes/arch/theme.lua")
beautiful.init("/usr/share/awesome/themes/default/theme.lua")
-- This is used later as the default terminal and editor to run.
terminal = "urxvt"
editor = os.getenv("EDITOR") or "nano"
editor_cmd = terminal .. " -e " .. editor
-- Default modkey.
-- Usually, Mod4 is the key with a logo between Control and Alt.
-- If you do not like this or do not have such a key,
-- I suggest you to remap Mod4 to another key using xmodmap or other tools.
-- However, you can use another modifier like Mod1, but it may interact with others.
modkey = "Mod4"
-- Table of layouts to cover with awful.layout.inc, order matters.
layouts =
awful.layout.suit.tile,
awful.layout.suit.tile.left,
awful.layout.suit.tile.bottom,
awful.layout.suit.tile.top,
awful.layout.suit.floating,
awful.layout.suit.fair,
awful.layout.suit.fair.horizontal,
awful.layout.suit.spiral,
awful.layout.suit.spiral.dwindle,
awful.layout.suit.max,
awful.layout.suit.max.fullscreen,
awful.layout.suit.magnifier
-- {{{ Tags
-- Define a tag table which hold all screen tags.
tags = {}
for s = 1, screen.count() do
-- Each screen has its own tag table.
tags[s] = awful.tag({ 1, 2, 3, 4, 5}, s, layouts[1])
end
-- {{{ Menu
-- Create a laucher widget and a main menu
myawesomemenu = {
{ "manual", terminal .. " -e man awesome" },
{ "edit config", editor_cmd .. " " .. awesome.conffile },
{ "restart", awesome.restart },
{ "quit", awesome.quit }
mymainmenu = awful.menu({ items = { { "awesome", myawesomemenu, beautiful.awesome_icon },
{ "open terminal", terminal }
mylauncher = awful.widget.launcher({ image = beautiful.awesome_icon, menu = mymainmenu })
-- {{{ Wibox
-- Create a textclock widget
batwidget = wibox.widget.textbox()
vicious.register(batwidget, vicious.widgets.bat,
function(widget,args)
local formatstring = " Bat: "..args[1]..args[2] .."%".. " "..args[3] .. " "
if args[2] <= 25 and args[1] == "-" then
return "<span color=\"red\">".. formatstring .. "</span>"
end
return formatstring
end, 60, "BAT0")
netwidgetETH = wibox.widget.textbox()
netwidgetWIFI = wibox.widget.textbox()
vicious.register(netwidgetETH, vicious.widgets.net, ' eth0:<span color="#CC9393">${eth0 down_kb}</span> <span color="#7F9F7F">${eth0 up_kb}</span>', 3)
vicious.register(netwidgetWIFI, vicious.widgets.net,' wlan0:<span color="#CC9393">${wlan0 down_kb}</span> <span color="#7F9F7F">${wlan0 up_kb}</span>', 3)
menubar.utils.terminal = terminal
mytextclock = awful.widget.textclock()--{ align = "right" })
-- Create a systray
mysystray = wibox.widget.systray()
-- Create a wibox for each screen and add it
mywibox = {}
mypromptbox = {}
mylayoutbox = {}
mytaglist = {}
mytaglist.buttons = awful.util.table.join(
awful.button({ }, 1, awful.tag.viewonly),
awful.button({ modkey }, 1, awful.client.movetotag),
awful.button({ }, 3, awful.tag.viewtoggle),
awful.button({ modkey }, 3, awful.client.toggletag),
awful.button({ }, 4, function(t) awful.tag.viewnext(aweful.tag.getscreen(t)) end),
awful.button({ }, 5, function(t) awful.tag.viewprev(aweful.tag.getscreen(t)) end)
mytasklist = {}
mytasklist.buttons = awful.util.table.join(
awful.button({ }, 1, function (c)
if c == client.focus then
c.minimized = true
else
c.minimized = false
if not c:isvisible() then
awful.tag.viewonly(c:tags()[1])
end
-- This will also un-minimize
-- the client, if needed
client.focus = c
c:raise()
end
end),
awful.button({ }, 3, function ()
if instance then
instance:hide()
instance = nil
else
instance = awful.menu.clients({ width=250 })
end
end),
awful.button({ }, 4, function ()
awful.client.focus.byidx(1)
if client.focus then client.focus:raise() end
end),
awful.button({ }, 5, function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end))
for s = 1, screen.count() do
-- Create a promptbox for each screen
mypromptbox[s] = awful.widget.prompt()--{ layout = awful.widget.layout.horizontal.leftright })
-- Create an imagebox widget which will contains an icon indicating which layout we're using.
-- We need one layoutbox per screen.
mylayoutbox[s] = awful.widget.layoutbox(s)
mylayoutbox[s]:buttons(awful.util.table.join(
awful.button({ }, 1, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 3, function () awful.layout.inc(layouts, -1) end),
awful.button({ }, 4, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 5, function () awful.layout.inc(layouts, -1) end)))
-- Create a taglist widget
mytaglist[s] = awful.widget.taglist(s, awful.widget.taglist.filter.all, mytaglist.buttons)
-- Create a tasklist widget
mytasklist[s] = awful.widget.tasklist(s, awful.widget.tasklist.filter.currenttags, mytasklist.buttons)
-- Create the wibox
mywibox[s] = awful.wibox({ position = "top", screen = s })
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(mylauncher)
left_layout:add(mytaglist[s])
left_layout:add(mypromptbox[s])
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
if s == 1 then right_layout:add(wibox.widget.systray()) end
right_layout:add(netwidgetWIFI)
right_layout:add(netwidgetETH)
right_layout:add(batwidget)
right_layout:add(mytextclock)
right_layout:add(mylayoutbox[s])
-- Now bring it all together (with the tasklist in the middle)
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_middle(mytasklist[s])
layout:set_right(right_layout)
mywibox[s]:set_widget(layout)
-- Add widgets to the wibox - order matters
--mywibox[s].widgets = {
-- mylauncher,
-- mytaglist[s],
-- mypromptbox[s],
--layout = awful.widget.layout.horizontal.leftright
-- mylayoutbox[s],
-- mytextclock,
-- batwidget,
-- netwidgetETH,
-- netwidgetWIFI,
-- s == 1 and mysystray or nil,
-- mytasklist[s],
-- layout = awful.widget.layout.horizontal.rightleft
end
-- {{{ Mouse bindings
root.buttons(awful.util.table.join(
awful.button({ }, 3, function () mymainmenu:toggle() end),
awful.button({ }, 4, awful.tag.viewnext),
awful.button({ }, 5, awful.tag.viewprev)
-- {{{ Key bindings
globalkeys = awful.util.table.join(
awful.key({ modkey, }, "Left", awful.tag.viewprev ),
awful.key({ modkey, }, "Right", awful.tag.viewnext ),
awful.key({ modkey, }, "Escape", awful.tag.history.restore),
awful.key({ modkey, }, "j",
function ()
awful.client.focus.byidx( 1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "k",
function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "w", function () mymainmenu:show() end),
-- Layout manipulation
awful.key({ modkey, "Shift" }, "j", function () awful.client.swap.byidx( 1) end),
awful.key({ modkey, "Shift" }, "k", function () awful.client.swap.byidx( -1) end),
awful.key({ modkey, "Control" }, "j", function () awful.screen.focus_relative( 1) end),
awful.key({ modkey, "Control" }, "k", function () awful.screen.focus_relative(-1) end),
awful.key({ modkey, }, "u", awful.client.urgent.jumpto),
awful.key({ modkey, }, "Tab",
function ()
awful.client.focus.history.previous()
if client.focus then
client.focus:raise()
end
end),
-- Standard program
awful.key({ modkey, }, "Return", function () awful.util.spawn(terminal) end),
awful.key({ modkey, "Control" }, "r", awesome.restart),
awful.key({ modkey, "Shift" }, "q", awesome.quit),
awful.key({ modkey, }, "l", function () awful.tag.incmwfact( 0.05) end),
awful.key({ modkey, }, "h", function () awful.tag.incmwfact(-0.05) end),
awful.key({ modkey, "Shift" }, "h", function () awful.tag.incnmaster( 1) end),
awful.key({ modkey, "Shift" }, "l", function () awful.tag.incnmaster(-1) end),
awful.key({ modkey, "Control" }, "h", function () awful.tag.incncol( 1) end),
awful.key({ modkey, "Control" }, "l", function () awful.tag.incncol(-1) end),
awful.key({ modkey, }, "space", function () awful.layout.inc(layouts, 1) end),
awful.key({ modkey, "Shift" }, "space", function () awful.layout.inc(layouts, -1) end),
awful.key({ modkey, "Control" }, "n", awful.client.restore),
-- Prompt
awful.key({ modkey }, "r", function () mypromptbox[mouse.screen]:run() end),
awful.key({ modkey }, "x",
function ()
awful.prompt.run({ prompt = "Run Lua code: " },
mypromptbox[mouse.screen].widget,
awful.util.eval, nil,
awful.util.getdir("cache") .. "/history_eval")
end),
-- Multimedia
awful.key({ }, "XF86AudioLowerVolume", function () awful.util.spawn("amixer -q sset Master 2dB-") end),
awful.key({ }, "XF86AudioRaiseVolume", function () awful.util.spawn("amixer -q sset Master 2dB+") end),
awful.key({ }, "XF86AudioNext",function () awful.util.spawn( "mocp -f" ) end),
awful.key({ }, "XF86AudioPrev",function () awful.util.spawn( "mocp -r" ) end),
awful.key({ }, "XF86AudioPlay",function () awful.util.spawn( "mocp -G" ) end),
awful.key({ }, "Print", function () awful.util.spawn("ksnapshot") end),
awful.key({ }, "", function () awful.util.spawn("slimlock") end)
clientkeys = awful.util.table.join(
awful.key({ modkey, }, "f", function (c) c.fullscreen = not c.fullscreen end),
awful.key({ modkey, "Shift" }, "c", function (c) c:kill() end),
awful.key({ modkey, "Control" }, "space", awful.client.floating.toggle ),
awful.key({ modkey, "Control" }, "Return", function (c) c:swap(awful.client.getmaster()) end),
awful.key({ modkey, }, "o", awful.client.movetoscreen ),
-- awful.key({ modkey, "Shift" }, "r", function (c) c:redraw() end),
awful.key({ modkey, }, "t", function (c) c.ontop = not c.ontop end),
awful.key({ modkey, }, "n",
function (c)
-- The client currently has the input focus, so it cannot be
-- minimized, since minimized clients can't have the focus.
c.minimized = true
end),
awful.key({ modkey, }, "m",
function (c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end),
awful.key({ modkey, "Shift" }, "f", fullscreens)
-- Compute the maximum number of digit we need, limited to 9
keynumber = 0
for s = 1, screen.count() do
keynumber = math.min(9, math.max(#tags[s], keynumber))
end
-- Bind all key numbers to tags.
-- Be careful: we use keycodes to make it works on any keyboard layout.
-- This should map on the top row of your keyboard, usually 1 to 9.
for i = 1, keynumber do
globalkeys = awful.util.table.join(globalkeys,
awful.key({ modkey }, "#" .. i + 9,
function ()
local screen = mouse.screen
if tags[screen][i] then
awful.tag.viewonly(tags[screen][i])
end
end),
awful.key({ modkey, "Control" }, "#" .. i + 9,
function ()
local screen = mouse.screen
if tags[screen][i] then
awful.tag.viewtoggle(tags[screen][i])
end
end),
awful.key({ modkey, "Shift" }, "#" .. i + 9,
function ()
if client.focus and tags[client.focus.screen][i] then
awful.client.movetotag(tags[client.focus.screen][i])
end
end),
awful.key({ modkey, "Control", "Shift" }, "#" .. i + 9,
function ()
if client.focus and tags[client.focus.screen][i] then
awful.client.toggletag(tags[client.focus.screen][i])
end
end))
end
clientbuttons = awful.util.table.join(
awful.button({ }, 1, function (c) client.focus = c; c:raise() end),
awful.button({ modkey }, 1, awful.mouse.client.move),
awful.button({ modkey }, 3, awful.mouse.client.resize))
-- Set keys
root.keys(globalkeys)
-- Set Firefox to always map on tags number 2 of screen 1.
-- { rule = { class = "Firefox" },
-- properties = { tag = tags[1][2] } },
-- {{{ Rules
if screen.count() > 1 then
awful.rules.rules = {
-- All clients will match this rule.
{ rule = { },
properties = { border_width = beautiful.border_width,
-- border_color = beautiful.border_normal,
focus = true,
keys = clientkeys,
buttons = clientbuttons } },
{ rule = { class = "MPlayer" },
properties = { floating = true } },
{ rule = { class = "gimp" },
properties = { floating = true } },
{ rule = { class = "Xdialog" },
properties = { floating = true } },
{ rule = { class = "Firefox" },
properties = { tag = tags[1][1] } },
{ rule = { name = "Thunderbird" },
properties = { tag = tags[1][2] } },
{ rule = { instance = "plugin-container" },
properties = { floating = true } },
{ rule = { class = "Luakit" },
properties = { floating = true } }
else
awful.rules.rules = {
-- All clients will match this rule.
{ rule = { },
properties = { border_width = beautiful.border_width,
-- border_color = beautiful.border_normal,
focus = true,
keys = clientkeys,
buttons = clientbuttons } },
{ rule = { class = "MPlayer" },
properties = { floating = true } },
{ rule = { class = "gimp" },
properties = { floating = true } },
{ rule = { class = "Firefox" },
properties = { tag = tags[1][2] } },
{ rule = { name = "Thunderbird" },
properties = { tag = tags[1][3] } },
{ rule = { instance = "plugin-container" },
properties = { floating = true, fullscreen = true } },
{ rule = { class = "Dolphin" },
properties = { floating = false, fullscreen = false, tag = tags[1][4] } },
{ rule = { class = "Luakit" },
properties = { floating = true } },
{ rule = { class = "Pidgin" },
properties = { tag = tags[1][5] } }
end
-- {{{ Signals
-- Signal function to execute when a new client appears.
client.connect_signal("manage", function (c, startup)
-- Add a titlebar
-- awful.titlebar.add(c, { modkey = modkey })
-- Enable sloppy focus
c:connect_signal("mouse::enter", function(c)
if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier
and awful.client.focus.filter(c) then
client.focus = c
end
end)
if not startup then
-- Set the windows at the slave,
-- i.e. put it at the end of others instead of setting it master.
-- awful.client.setslave(c)
-- Put windows in a smart way, only if they does not set an initial position.
if not c.size_hints.user_position and not c.size_hints.program_position then
awful.placement.no_overlap(c)
awful.placement.no_offscreen(c)
end
end
local titlebars_enabled = false
if titlebars_enabled and (c.type == "normal" or c.type == "dialog") then
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(awful.titlebar.widget.iconwidget(c))
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
right_layout:add(awful.titlebar.widget.floatingbutton(c))
right_layout:add(awful.titlebar.widget.maximizedbutton(c))
right_layout:add(awful.titlebar.widget.stickybutton(c))
right_layout:add(awful.titlebar.widget.ontopbutton(c))
right_layout:add(awful.titlebar.widget.closebutton(c))
-- The title goes in the middle
local title = awful.titlebar.widget.titlewidget(c)
title:buttons(awful.util.table.join(
awful.button({ }, 1, function()
client.focus = c
c:raise()
awful.mouse.client.move(c)
end),
awful.button({ }, 3, function()
client.focus = c
c:raise()
awful.mouse.client.resize(c)
end)
-- Now bring it all together
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_right(right_layout)
layout:set_middle(title)
awful.titlebar(c):set_widget(layout)
end
end)
client.connect_signal("focus", function(c) c.border_color = beautiful.border_focus end)
client.connect_signal("unfocus", function(c) c.border_color = beautiful.border_normal end)
Here is also my slime config and my initrc
ls -lisa .xinitrc
3276814 4 -rwxr-xr-x ...
#!/bin/sh
xrdb -merge ~/.Xresources
wicd-client --tray &
exec awesome #>> ~/.cache/awesome/stdout 2>> ~/.cache/awesome/stderr
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions awesome,xfce4,icewm-session,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user kili
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password yes
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme archlinux-simplyblack
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
Thanks in advance!
Edit:
Besides a lot of other errors the problem was the systray. It was created 2 times, now login works again. I figured that out via enabling logging for awesome in the xinitrc again.
Last edited by stubb (2013-01-08 23:20:05)Hi,
I have the same kind of issue after updated slim from v1.3.4-4 to v1.3.5-1.
see my topic here :
https://bbs.archlinux.org/viewtopic.php?id=156792
Last edited by cedricl (2013-01-24 17:16:42) -
We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values) at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
RamasubbuTry below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered
Maybe you are looking for
-
How to create a folder and a sub folder in it
Hai everyone, I am developing an auto responder application in which many users will be creating different auto responders.To orgainse these lists better i need to give a folder option where a person can create a auto responder in his own folder so t
-
Some messages are disappearing from this forum
Hello friends at www.oracle.com , some messages seems to disappear from this forum, I've just read 2 answers to a message I've posted these days and they disappeared when I answered. What's happening? If I'm doing something wrong, I want to be advise
-
How do I transfer photoshop cs3 from my mac powerbook to my macbook air?
How do I transfer my photoshop cs3 from my mac powerbook to my macbook air?
-
Copying CUSTOMER_H fields to follow up document.
Hi Everybody , I implemented CHARM (ZDCR and ZDHF ). In CRMD)_ORDER using EEWB i created customer fields . Now my requirment is when i create ZDHF from ZDCR i need to copy these customer fields from ZDCR to ZDHF. Please help me how to do this . Thank
-
Start timer from another thread
I am working on a project which will receive command from telnet and start a timer. In the sock function, I use form reference to call timer.start(), but timer control cannot start Tick event: Here is code for sock functin after receive the command: