Failed to export images with droplet

I've Created a droplet and tested it successfully in Photoshop, then I use this droplet by select it in Post-Processing when I export DNG to TIFF in Lightroom, but there's a problem:
1. If PS is not opened when I'm exporting images in LR, the droplet will work well, i'll get an processed TIFF
2. If PS is opened before I'm exporting images in LR, the droplet won't work, then I get an unprocessed TIFF
Due to Situation 1, if PS is not opened when I'm exporting images and I tried to exported 30 images with droplet, finally I'll get only ONE image successfully processed, because PS was opened when LR export the first image.
Is there any solution for this problem?
Thanks!!

Thanks for reply. I think I found out the solution but I still not sure what the problem is.
At the first time, I choose "Edit in Photoshop" in Lightroom to Open the DNG file in PS, then I start recording actions, and end up these actions with "cmd-S" & "cmd-W", this proccessed image won't save to the original file (because that's a DNG), it will save to a new PSD file next to the DNG. I think this is why when I use this Droplet to proccess other images, it can't complete the proccess.
So the solution is to create droplet in a normal way, open images (not DNG or other RAW files) from Photoshop instead of Lightroom, so that the file could be saved to it's original file.
In my workflow, I export DNG images to TIFF and select droplet in Post-Proccessing, so after export these images, LR will put them into the droplet, I'll get the result by just one click. I also check "Add to This Catalog" so I can adjust them in LR later.
Thanks a lot!!

Similar Messages

In iPhoto, how can I export images with the metadata - including the title and caption information - intact as part of the image?

In iPhoto, how can I export images with the metadata — including the title and caption information — intact as part of the image?

Check those boxes in the export dialogue - Exporting From iPhoto
LN

Illustrator CS4 exporting images with subtle grid overlaye

I've run in to a rather troubling issue where Illustrator seems to be exporting images with a very subtle white grid overlay.
The raw images do not have this grid, neither do the images as viewed in Illustrator.
The grid appears when exporting as .png and .jpg in a variety of resolutions.
Any ideas what's going on or how to remedy?

The images were part of a web mockup that was created in AI.
"Save for Web" did not change the outcome.
I defaulted to Photoshop, which fixed my immediate problem.. but still does not answer my question as to why this is now happening when I have completed this process trouble-free numerous times before.

Error "Failed to Export PDF" with big image on CS6 (32) and CC (64)

Hi everyone,
I'm on indesign CS6 (v8.0.2) and when I try to export pdf with a very big image ( *.tiff, 25000*35000 pixels, ) , the action failed with this message :" Failed to export a PDF".
To be sure that there is no any corrupted elements, I made a very simple layout (one page , and just one element for my image,I turnoff prefilgth and all ressource intensive options, and export with no downsampling or resampling) and try to export with different size image:with 20000*30000 -or smaller -image the export works, always failed with image .The export failed to in scripting mode.
If I diveded my image in four , the export works but this solution is not convenient (I actually made tests for a fully automatised process, and we want to be sure that the indesign component is enough "safe")
I try the same action with an evaluation version of indesign CC 64 bits (v9.2) and have the same behavior.
I can imagine that there is a memory issue there, but my config seems to be strong ( windows server 64 with 16GB ram, DD with more than 100GB free). I don't undersant why-in a "full" 64 bit environnement- it is not possible to manipulate and export very large image ?
I'm wonder If the background task is a part of the problem, and if it 's possible to disable it in CS6 or CC as in cs5 ( creates an “DisableAsyncExports.txt” file in Adobe InDesign executable directoty don't seems to disable it in CC or CS6).
Thank you for your help and good ideas..
DC.

this is a .tif (not a "big"tiff) compressed in LZW or ZIP.
I just tried with another format (png), the error is the same...

Exporting images with subfolders by album name

Hello,
I have a project with approx 800 images, organized in 12 different albums. Now I want to export all the images in a folder, which should contains 12 subfolders named with the original album names.
For example, I have a project named "friends" which contains 12 albums named "Emma", "Laura", "Tom", etc... A want to export in order to have this subfolders:
Friends/Emma
Friends/Laura
Friends/Tom
I tried the export-versions option "subfolder format", but I'm not able to do that.
Who can help me?
Thank you,
Paolo

One last idea
you could color label the pics.
For example all images of Emma in the album "Emma" get a red label, all images of Laura get a blue label, ....
There a seven colors available like in Finder. This perfectly matches with your needs^^ Seven persons get a different color each, one person gets no color. So you have 8 criterias. Lucky you, not having nine people :P
Click on your project with all 800 pics and their different color labels, select all and export them.
Aperture now will give each exported image the same color label as it has in Aperture. After export has finished you can easily put the images in a corresponding folder based on the color label...
Have fun

Exporting Images With Only Specific Metadata

How do I export images from Aperture with only specific metadata. Example: I want to export my images with only the copyright IPTC metadata (and maybe the keywords or contact info etc., but I don't want the world to see the EXIF data.
Aperture manual (page 507 I think) says to do this I need to make a separate version with only the metadata I want to appear. Er right? How does one do that then Apple!? I know how to make another version by the way, but how can I switch off/strip the exif, but keep the IPTC? Surely the monment I tick the include metadata checkbox in the Export panel and hit go this EXIF data will be inserted as it is inherent with the file?
Can anyone enlighten me please?
Kevin

Time to hit the Aperture feedback page. If you include metadata, you include the EXIF data.
About all you could do is export with no metadata, import the new 'stripped' file and then lift-n-stamp the IPTC data onto it, then export that.
Ian

Exported images with large blank areas

I exported RAW images from Aperture as JPEGs. In many of them, large blank areas appeared instead of the images (ie: the top half of the photo is blank, except for a few squares scattered throughout). Did anyone have a problem like this? How can I solve it?

Yes, I had a similar issue as have others. There was at least one thread ... worth doing a search. Blocks on export image etc. for subject.
I can't recall the "fix" as mine disappeared with either (a) 1.1 and/or (b) doing NOTHING but exports!
(Yup, on a Quad designed for multi-tasking, it is sad isn't it.)
However, as I said, I'm ostrich-like working around a problem that may no longer affect me.

LR not exporting images with proper presets

how come I can edit an image and then save it by exporting it with preset it looks way different when I reopen the file. and I am not talking little changes I mean crops through peoples faces and super contrasty. it there a better way to save the images to be burned on to a disk later? i just upgraded hoping it would stop this problem. guess what????

My guesses would be that either:
1 - You are Exporting your images in LR without using the sRGB profile and you should be, or
2 - You have a wide-gamut monitor and are viewing sRGB images in a non-color-managed application or at least one like IE that doesn’t respect a non-sRGB monitor profile.

How to save/export image with 3D grid

I am in CS6 with the 3D workspace selected. I need to export/save the image with the grid viewable. I know this is possible as I have seen it on a few other images. The catch is I need it 300 dpi so I cannot just screen shot as png.

I don't understand what's the problem? Can you please elaborate? Show some code snippets and tell where you stucks on.

Adding and /exporting/ image with Metadata problem

i have been able to add metadata to an image i need to publish but for some reason i am having a problem figuring out how to export this metada with the image.
i see i have an option to export as original or as version. does this affect whether metada has been exported?
also, can i export as PNG as get the metadata in the image or do i have to use something like jpg for some reason?
finally, is there a way to verify that the metadata has been exported along with the image to my desktop before i upload to the web?! it seems really sort of odd to have to re-import the image into Aperture to test the exported image to see if the metadata is there. i mean, i am glad i just did this with the image and metadata that i exported b/c the metadata is not there but it seems like this could be simpler.
TIA

What export preset are you using? Did you check the box to include metadata. This is all in the manual. PNG has poor support for metadata so you're best sticking to Jpeg. You can check for the metadata in Preview, or an of a 100 other photo apps.
Regards
TD

Export image with cursor legend

Hello,
I need to export waveform graph to MS word. To do this I am using Invoke node property "Export Image". While doing this, only graph area is being exported and not with cursor legend. In my report I need to show certain cursor values. So please can anyone let me know, how to do this??
Thanks in advance.
Solved!
Go to Solution.

I have the same behavior with LV86 and 2009. Maybe you could use the invoke node Get Image.
JM
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp
Attachments:
Export Image and Get Image LV86.vi ‏14 KB

How to export images with Project Name to be visable by Photo Mechanic.

Hello all,
I am trying to create another complete set of my images, that can be edited by outside programs (Photo Mechanic and/or Lightroom). I am doing this by exporting the images out of a managed library. I want the Aperture "*Project name*" and Rating fields to be passed to Photo Mechanic. And then I want PM to be able to do queries on the Metadata fields containing the Aperture Project Name and Rating. My intention is to use Photo Mechanic to rename the images and relocate the images but still keep track of the Rating and Project Name.
In Aperture, when I add a custom metadata item under IPTC and export the image, that custom metadata item does not show up in PM or Bridge for that matter.
How can I export images and have the Rating and *Project Name* be exported and visible in PM or LR or Bridge?
Thanks in advance,
Dick B.

There is not an easy way but Ian Wood's tool might help you out.
Personally I would just use the "subfolder format" drop down options available in all of the export and relocate dialogs to sort them into directories that are based on Aperture project name - easy enough considering those other tools use file system based folders for there organization structure anyway.
RB

How to export images with meta data from iPhoto?

Hi
I have about 4000 family photos which have been scanned and imported to iPhoto. They are all dated the same day, naturally. I'm now in the process of adding metadata to every photo: location, faces, time and year, file name and description.
Once I have gone through every photo, I will put them into albums based on events and the meta data above.
Eventually, I will want to share all these photos with people who should like to see them (and who are not tech savvy...) I'm looking for the best approach to do to this.
1. Will all the metadata that I have added remain in the photos when I export them?
2. What exactly is the best approach to export these 4000 photos?
- As I have gone through all the hard work of sorting the photos in albums, is it possible to export these photos in the albums that they already in?
I hope to hear from someone out there. Thanks a lot
Best wishes

You need to have an application like EXIF Viewer for Mac OS X to check the files once you've exported them with the various checkboxes checked:
Happy Holidays

Iphoto exporting images with no name and mail with no reply info

One of our Macbook pros, running osx 10.8.5, is sending email via iphoto that ,
#1) creates a photo with NO NAME that cannot be saved no matter what you do,
and
#2) the email can not be forwarded, seems like because there is not "reply to" information.
the Prefs are filled out correctly in the iPhoto email settings.
Why did they configure iphoto to do the "send" FROM iphoto in this OSX version? This worked fine before as it would open up your mail whereby you could arrange and double check things.
So i was trying to do a work around by sending the email to myself but the email and the attachment can not be forwarded. As well the image CAN NOT be dragged to the desktop to be saved. USELESS!
just a Ghost email and attachment.
very frustrating.

InDesign has a feature that will automatically search for other missing links when you fix a missing link. When you relinked the first of your grayscale images, you may have accidentally relinked to the saturated image. When this happened it searched the directory that the newly re-linked file was in for all the other missing files. Since your image names all matched up to images in that directory, they all got re-linked.
This auto-relink feature can be toggled in the relink dialog:
If you have a backup of your file, you can revert to that version, and try to relink your images from that one. In the future you should make sure that images all have unique identifiers, it is bad practice to have images with identical names.

Failed to export image in image export (ix-8-5-1-linux-x86-64)

Hi,
I am trying to use Oracle OIT Image Export to convert EMF/WMF files to png. And I am trying to run the example "ixsample" in the downloaed SDK.
I got "No valid fonts" error while running the example as below:
./ixsample "../samplefiles/black_shapes.wmf" "../result/test.png"
Creating file: "test.jpg"
EXRunExport() failed: No valid fonts found (0x0B03)
It works if the sample file is "jpg", such as "oivt.jpg" provided in the SDK samplefiles. Anything else should I do to make "wmf/emf" work?
OS: Red Hat Enterprise Linux Server release 6.3 (Santiago)
Thank you.

Hi
This error is arising out of library issue. As per the OI documentation https://docs.oracle.com/outsidein/851/supportdocs/ds_oitfiles_8_4_1.pdf these formats are supported. I have not worked these conversions before; but, searched a bit and found that these fonts are very machine dependent.
Approach 1: Identify the fonts required for WMF and EMF, Find linux compatible version of those and then run the conversions
Approach 2: Run the IBR instance on those windows machine where these fonts are available
Or you can go with other converter's like ImageMagick for conversions
Installing GraphicsMagick
ImageMagick: Advanced Unix Source Installation
You can try these installations
EMF: libEMF: Enhanced Metafile Library
http://www.csn.ul.ie/~caolan/Packages/libwmf.html
This might provide you some pointer
http://www.rohde-schwarz.com/en/faq/fsiq-fonts-for-wmf-files-faq_78704-30023.html

Failed to export images with droplet

Similar Messages

Maybe you are looking for