Failed to export the file to Sharepoint if the document library had been renamed

Hi,
We have encounter a problem that we failed to upload the files to Microsoft SharePoint 2007 through the SharePoint Connector.
The document library was initially created as doclibA, and renamed to docLibB
When we configure the connector to upload the document, we found that it failed to upload to the library.
And we have change back the name , and it could upload.
Did anyone got any clue on it ?
Janice

Yes, we can upload the doc to doclibB using SharePoint UI
and actually, the rename was done before the we setup the connector.
we have deployed other forms in the same site (same livecycle, same sharepoint) before without any problem.

Similar Messages

Failed to export the JPEG file

When I attempt to export a jpeg from InDesign I get the following error message, please help:
"Failed to export the JPEG file: File cannot be written.
Disc may be locked or full."
The disc it is writing to has 90Gb of memory free and I've tried knocking the quality of the export down with no success.
I am running CS6 on a fully updated Macbook Pro.
Thanks.

I'm trying to export to the hard drive on the Mac as usual, and have never had this issue before?

InDesign CS6 "Failed to export the JPEG file. File cannot be written. Disk may be locked or full."

I get this error "Failed to export the JPEG file. File cannot be written. Disk may be locked or full." when sending small (3"x3") and large (40"x60") files to a printer hot folder. Sometime if I close the program and restart it will let me export. What could be causing this to happen?
I am on Windows 7 with 4GB RAM PC.

I guess the printer is grabbing the file before it is entirely written…
Workaround: Do not save to a hot folder. Move the files after exporting to the hot folder.
Uwe

Content generation error. [Error: Failed to Export the PDF file.]

Hi;
Everytime i try to update an article within a folio in DPS folio builder i get this error :
Content generation error.
[Error: Failed to Export the PDF file.]
My colleague next to me is running exactly the same set up and doesnt get the error. in fact his update anf sideloading is fast as lightning.
the ONLY difference is that im running v28 tools and he is on v27, however wehave another colleague running v28 and his updates work perfectly.
Any ideas lovely community?
Scott

Hi Bob;
Have tried that one. And again on your suggestion....no luck.
Scott

"Content generation error. Failed to Export the PDF file"

Building a multi-folio in InDesign 6 Folio Builder V30. Received "Content generation error. Failed to Export the PDF file" on several of the spreads. I have tried reducing the original pdf files sizes, but that did not help.
Any suggestions on other possible causes or way to fix.?
thanks
Christopher Huber
MMN

I'm very new to DPS so I hope the following description makes some kind of sense.
My magazine is in the process of doing trial runs for an iPad edition. I'm setting some templates up for us to work off so the process from magazine to iPad will run a lot smoother month to month.
So far I've set up some dummy stock pages in an InDesign CS6 document, currently 15 pages long.
All images are linked and all fonts have paragraph styles applied to them.
I'm at the stage I want to check the document on my iPad to test run font sizes and their legibility.
We have successfully been able to export the document as a jpg file but we really need the PDF format. When attempting this we get the above message.
Sonia.

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the

Export the pdf from indesign some error Pop Up window (Failed to Export the PDF file). How slove the problem
Please some one help on this

You need to try exporting the first half of the book.
If that exports ok then export the other half of the book.
Whatever half it fails on - keep dividing the book in half to find the culprit page or pages.
For example if your book is 128 pages long:
1. Export pages 1 - 63
2. If these Fail to Export then
3. try exporting1-32
4. If these Fail to Export
5. then try exporting1-16
If it doesn't fail (step 2)
Then export pages 64-128
and 64-90 etc.
until you find the pages causing the issues.

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

Failed to export the report in Crystal Reports 2008

I am using Crystal Reports 2008 version 12.1.0.892, when i try to export data to Microsoft Excel(Data Only) it's failing with the error "Failed to export the report.", please help in resolving this issue.

Hi Abhilash,
I tried suppressing the report header and page header it was working fine, but previously i used to export with all the headers. Without page headers the output file is of no use. I was facing the same issue on one of the local desktops too then i uninstalled the software and installed it again then it was working fine but its not the solution.
-Srikar

Failed to export the report to PDF

I am currently developing multiple applications using Visual Studio 2008 and Crystal Reports. The application works fine in the development environment but when deployed to a user's machine I get the error listed below.
I installed the redistributable package that came with Visual Studio. Then I installed my packed. I check in the users GAC that the assemblies I used in developing are installed. They are present on the users machine.
I have not found much on this subject online. Does anyone know of a solution to this issue? Was installing the redistributable package that came with Visual Studio 2008 correct? Any help would be great.
Not implemented.
Failed to export the report.
Error in File C:\DOCUME~1\USER~1\LOCALS~1\Temp\1\temp_a4f4905b-85ec-4420-ae7e-f1a57ecd3f44 {CDBECA9C-8D45-4BEE-949F-F6CF818AB575}.rpt:
Operation not yet implemented.
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
   at Condor.Threading.PortfolioAnalysisPDFThread.StitchReport(List`1 crReports)
   at Condor.Threading.PortfolioAnalysisPDFThread.CreateReport(DoWorkEventArgs e)

Hi Ludek ,
Thanks for reply,
I download CR2008 Redistribale & Installed it.
But still I am getting following error on client PC;
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
Please give solution.
Thanks

I just updated my Indesign to CC14 and now I cannot export to anything - Failed to export PDF file

I just updated my Indesign to CC14 and now I cannot export to anything - Failed to export PDF file@

No error message it goes through the actions and then in the background task it shows error. I have tried to export to pdf, jpeg anything and nothing is product. I have tried highquality, low quality settings (all of them) and nothing.

Failed to export the report... to Microsoft Excel (97-2003) Data-only

I'm using Crystal Report version 12.1.0.892
I'm trying to export reports to 'Microsoft Excel (97-2003) Data-only' (an option I use all of the time), and am getting the message "Failed to export the report."
It only started this week. I can export to "'Microsoft Excel (97-2003)" (and PDF, etc.) without incident, but it's not what I want.
I have not made any changes to Crystal Reports, but have applied updates to Microsoft Windows XP (ver 2002, SP 3).
Any ideas?

I'm having the same error and have a subreport with 3 groups. The subreport data being returned is all in the Details section. All other sections of the sub are suppressed.
I can export the main report fine (it's just headers). I can also drill into the sub and export that fine, but of course get back only limited data. When I try to export the whole thing it chokes.
Any thoughts?
Many thanks for your help.

The way SharePoint open office documents will differ if the user try to open them from the document library directly, or if users try to open the document from the search result page.

I have a document library where I have uploaded an excel sheet to it. Now If I click on the excel sheet directly from the document library page , I will get the following error ““The webpage cannot be displayed””. While if I do a search and I open the excel
sheet from the search result page , it will open the excel sheet using the excel services inside the browser !!.
So can anyone advice on this ?
Also if I have a PowerPoint document , and I try to open it from the document library I will get the following error “The webpage cannot be displayed” , and the URL will be prefix with the following “ms-powerpoint:ofv|u|”. while if i do a search and i open
the PowerPoint from the search result page i will be prompted to either open or save the document ? So why SharePoint is reacting totally different when trying to open document library items from the document library Or from the search result page?

Hi,
The behavior in the document library could be probably because of the Documents handling setting. Please try setting it to default behavior (Open in browser) as i hear from you that the default behavior is to open from browser.
Thanks, Suneetha
Currently I have set the following;-
1. On the library advance setting :- I define “Open in the client application”
2. On the web application setting:- I define stricked for Browser File Handling
And I have noted if I delete the browser cache and I access the document , then I will be prompted with the download dialog. but if I re-click on the same document I will be redirected to the
The webpage cannot be displayed
And the ms-powerpoint:ofv|u| will be added to the beginning of the URL. So could this be a caching problem ?

Upload and download the file same name but different extension from the document library.

HI,
     I am using the Client Object Model (Copy. Asmx ) To upload and download the file from the document library.
I am having the mandatory File ID for the each Document.
I tried to upload the the document (KIF53.txt) with File ID (KIF53) uploaded successfully.
Again I tried to Upload the document(KIF53.docx) With File ID(KIF53) its uploaded the file but it not upload the File ID in the Column
Please find the below screen shoot for the reference.

thanks ashish
tried
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder IsFolder alredy Exist.
private string IsFolderExist(string InputFolderName)
        string retStatus
= false.ToString();
        try
            ClientContext context
= newClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
context.Credentials = CredentialCache.DefaultCredentials;
            List list
= context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
            FieldCollection fields
= list.Fields;
            CamlQuery camlQueryForItem
= new CamlQuery();
camlQueryForItem.ViewXml = string.Format(@"<View
Scope='RecursiveAll'>
<Query>
                      <Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
                        </Eq>
</Where>
</Query>
</View>", @"/sites/test/hcl/"
+ InputFolderName);
Microsoft.SharePoint.Client.ListItemCollection listItems
= list.GetItems(camlQueryForItem);
context.Load(listItems);
context.ExecuteQuery();
            if (listItems.Count
> 0)
retStatus = true.ToString();
            else
retStatus = false.ToString();
        catch (Exception ex)
retStatus = "X02";
        return retStatus;
thanks
Sundhar

Failed to get the document information (LO 26315)

Hi,
I have to create an Xcelsius dashboard where I use a Live Office connection based on a WebI-report. The WebI is created on top of a BEx Query.
I need to pass 12 parameters to the WebI-report in orde to get the correct data.
Everything works fine in design-time, but when I want to preview the dashboard, I get the error: Failed to get the document information (LO 26315).
After investigating the issue, I've noticed that everything works fine when the parameters I have to pass, are only created in the WebI-report. But in my case it is a BEx variable that causes the error.
There is no possible way that I can recreate the BEx variable in the Universe (There are restricted key figures, calculated key figures and cell restrictions in the BEx query).
My question: is there a way to pass a parameter from an Xcelsius dashboard to a WebI-report via a Live Office connection to a BEx variable?
Lieven

Fred,
on the SAP Notes Search page on sdn.sap.com, you can enter the note number in a text field at the right side of the page, just above the Search Option part.
Just enter Note 1357924 in that text field and press the blue icon with the arrows next to it. Thiw ill show the corresponding note.
Lieven

Cannot access external data , Failed to get the document information.

Hi All,
In my dashboard there are live office connections which has optional prompts defined in SAP BI. I have bound the cells to these prompts in live office object properties.
There are no errors while refreshing the LO connections from excel sheet.
But when i run that dashboard and give BLANK value for that prompt then it throws the error :
Cannot access external data , Failed to get the document information. (LO 26315).
Reply highly appreciated.
Thanks & Regards,
DJ

Hi Hardik,
I am building a similar solution as yours connecting webi reports to Bex queries and reading the webi data through live office into the dashboards. I am using almost similar versions as yours - BW 7.1 SP5, BO 4.1 SP4, Dashboards and Live Office SP4 versions. I am facing issues setting up the live office connections itself. I create the Live office connections within an excel and when I try to import this excel spreadsheet into my dashboard designer, it runs forever and crashes.
Could you please list out the steps you performed to get the Dashboard to preview live office data? Do you have OLAP connections for BW cubes and created WebI reports using these connections or You created a Universe on top of the Bex Queries?
It would be great if you could share the steps performed.
With respect to your issue, check if the report engine service is running. Do you have any error message details apart from this error?
Thanks.
Regards,
Rohini.

Failed to export the file to Sharepoint if the document library had been renamed

Similar Messages

Maybe you are looking for