Failed to find element.
Hi all,
Some times while playback I am facing on issue like failed to find element.
like
Navigation failed:Failed to find element window(index=0).frame(name="contentFrame" | index=1).form(name="QUERYTEXTCOMPONENTS" | index=5).formelement[INPUT](index=41) at index 1).
how to get rid of this thing ,any solutions?
Thanks
Umesh
Edited by: USoni on Feb 15, 2009 10:48 PM
Umesh
What this error means is that Navigation Editor is looking for a form filed and it can't find it
There could be two reasons for that error:
1) The form filed is not being sent in the previous page and some content is messing, make sure that the form QUERYTEXTCOMPONENTS exists and that it contains a form element of type input.
2) The navigation editor in not locating the form filed, I can see that the form element can only use the index as reference to locate the object, you best option here would be to make the navigation static, so there is no content check.
Regards
Alex
Similar Messages
-
Failed to find an application descriptor -- loading DefaultApplication
Hi,
I was trying the XmlBean example shown in the thread
Serialization of Owned Collections with XmlBeans
and I am getting the following error message
Failed to find an application descriptor -- loading DefaultApplication
Assertion failed:
Beep!
at com.tangosol.run.xml.CollectionAdapter.<init>(CollectionAdapter.java:70)
at com.tangosol.tests.xml.TestCollectionAdapter.<init>(TestCollectionAdapter.java:17)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.tangosol.run.xml.XmlBean$BeanInfo.makeAdapter(XmlBean.java:1141)
at com.tangosol.run.xml.IterableAdapter.findAdapter(IterableAdapter.java:242)
at com.tangosol.run.xml.CollectionAdapter.<init>(CollectionAdapter.java:90)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.tangosol.run.xml.XmlBean$BeanInfo.makeAdapter(XmlBean.java:1141)
at com.tangosol.run.xml.XmlBean$BeanInfo.<init>(XmlBean.java:966)
at com.tangosol.run.xml.XmlBean.initBeanInfo(XmlBean.java:874)
at com.tangosol.run.xml.XmlBean.findBeanInfo(XmlBean.java:814)
at com.tangosol.run.xml.XmlBean.getBeanInfo(XmlBean.java:362)
at com.tangosol.tests.xml.TestXmlBean.main(TestXmlBean.java:21)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
What is the missing item to make it run ?
Regards,
Pranab<br><br> <b> Attachment: </b><br>testxmlbean.zip <br> (*To use this attachment you will need to rename 527.bin to testxmlbean.zip after the download is complete.)Found the problem in Contact.xml it should look like this
<?xml version="1.0"?>
<xml-bean>
<name>contact</name>
<property>
<name>Name</name>
<xml-name>name</xml-name>
</property>
<property>
<name>AddressCollection1</name>
<xml-name>address1</xml-name>
<type>java.util.Collection</type>
<class>java.util.ArrayList</class>
<element>
<xml-name>address1</xml-name>
<type>com.tangosol.tests.xml.Address</type>
</element>
</property>
<property>
<name>AddressCollection2</name>
<type>java.util.Collection</type>
<class>java.util.ArrayList</class>
<element>
<xml-name>address2</xml-name>
<type>com.tangosol.tests.xml.Address</type>
</element>
</property>
</xml-bean> -
Writing RPi2 image to SD Card: dism Error: 1168 - cannot find element
Hello all,
I have installed Windows 10 build 10074 (Dutch language) on a PC, no VM.
I have downloaded and extracted Windows_IoT_Core_RPI2_BUILD.zip
One of the files extracted is Flash.ffu
I have established that my SD card is a class 10 and 16 GB
I open an Administrator command prompt.
I have established the SD card is seen as "Disk 1" 14 GB size
I change directory to the directory containing Flash.ffu
I execute the command: "dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDrive1 /SkipPlatformCheck"
I receive follwing error:
Deployment Image Servicing and Management tool
Version: 10.0.10074.0
Error: 1168
Kan element niet vinden.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
> "Kan element niet vinden" translates as : "Cannot find element"
I notice a difference in filename between the extracted "Flash.ffu" and the "flash.ffu" (capital F) so I retry the command as:
"dism.exe /Apply-Image /ImageFile:Flash.ffu /ApplyDrive:\\.\PhysicalDrive1 /SkipPlatformCheck"
but with same error 1168
The DISM log entry follows below.
Anyone encountering the same issue, and better still, have found a solution?
Many thanks!
Ralph
DISM log file entry:
2015-05-02 13:36:06, Info DISM PID=4348 TID=4092 Scratch directory set to 'C:\Users\ralph\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2015-05-02 13:36:06, Info DISM PID=4348 TID=4092 DismCore.dll version: 10.0.10074.0 - CDISMManager::FinalConstruct
2015-05-02 13:36:06, Info DISM PID=4348 TID=4092 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Failed to get and initialize the PE Provider. Continuing by assuming
that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Manager: PID=4348 TID=4092 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM.EXE:
2015-05-02 13:36:06, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2015-05-02 13:36:06, Info DISM DISM.EXE:
2015-05-02 13:36:06, Info DISM DISM.EXE: Host machine information: OS Version=10.0.10074, Running architecture=amd64, Number of processors=2
2015-05-02 13:36:06, Info DISM DISM.EXE: Dism.exe version: 10.0.10074.0
2015-05-02 13:36:06, Info DISM DISM.EXE: Executing command line: dism.exe /Apply-Image /ImageFile:flash.ffu /ApplyDrive:\\.\PhysicalDrive1
/SkipPlatformCheck
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll -
CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll -
CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Loading Provider from location C:\Windows\System32\Dism\FfuProvider.dll -
CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Connecting to the provider located at C:\Windows\System32\Dism\FfuProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-05-02 13:36:06, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2015-05-02 13:36:06, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2015-05-02 13:36:06, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2015-05-02 13:36:06, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2015-05-02 13:36:06, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2015-05-02 13:36:06, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2015-05-02 13:36:06, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2015-05-02 13:36:06, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2015-05-02 13:36:06, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2015-05-02 13:36:06, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2015-05-02 13:36:06, Info DISM DISM.EXE: Attempting to add the commands from provider: FfuManager
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Getting Provider GenericImagingManager - CDISMProviderStore::GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Getting Provider FfuManager - CDISMProviderStore::GetProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-05-02 13:36:06, Error DISM DISM Imaging Provider: PID=4348 TID=4092 base\ntsetup\opktools\dism\providers\imagingprovider\dll\genericimagingmanager.cpp:2546
- CGenericImagingManager::InternalCmdFFUApply(hr:0x80070490)
2015-05-02 13:36:06, Error DISM DISM Imaging Provider: PID=4348 TID=4092 base\ntsetup\opktools\dism\providers\imagingprovider\dll\genericimagingmanager.cpp:535
- CGenericImagingManager::ExecuteCmdLine(hr:0x80070490)
2015-05-02 13:36:06, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2015-05-02 13:36:06, Info DISM DISM.EXE:
2015-05-02 13:36:06, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2015-05-02 13:36:06, Info DISM DISM.EXE:
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Found the OSServices. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Disconnecting Provider: FfuManager - CDISMProviderStore::Internal_DisconnectProvider
2015-05-02 13:36:06, Info DISM DISM Provider Store: PID=4348 TID=4092 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProviderSame problem here.
- I tried with two different SDcard readers - no difference.
- I tried with different / bigger card - no difference. -
Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj -
I recently signed out of itunes on my imac and when i tried to sign back in i get the error message: ConnectionManager::invoke::failed to find service connection url. If i try again i get another box asking if i've forgotten my password. But my password is definitely right as i just used to it make an account on this support page. Any simple ways of fixing this?
Just to test the simple things first, did you try to sign in using another credential?
If only yours fails, then is a RIM issue, otherwise is indeed your Playbook failure.
--- Catalonia, next state in Europe ----
Use the "solved" or "Like" icons if my answer helped you.
BES10 administrator for several customers.
"SMPTE Calculator" timecode APP developer for BB10 -
Hi there
Trying to patch a new Windows 7 SP1 image within SCCM 2012 SP1, but it's failing.
I've searched for information on the failure messages I am seeing, but although there is a LOT of information online concerning Offline Servicing failures, I can't find anything on the errors I am seeing.
I've tried injecting a single update, five updates and ten updates, no difference, same messages.
We have McAfee Access Protection disabled, as we know Offline Servicing simply won't work if this is running.
In the console, in Schedule Update Status for the image I am trying to update, the following message is shown:
"Failed to find or access the update binaries to be applied on the image."
That sounds as if the process can't find the actual .cab file for any update I've tried to inject, but I don't know why it wouldn't be able to do that, we have Software Updates configured and the .cab files are on the same server.
When I looked at the OfflineServicingMgr.log file, I see the following entries:
Processing image at index 1 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:52:49 8272 (0x2050)
Mounting image at index 1. Image file='D:\ConfigMgr_OfflineImageServicing\PackageID\W7_Image.wim', MountDirectory='D:\ConfigMgr_OfflineImageServicing\PackageID\ImageMountDir', ImageFileType='WIM', Mode='ReadWrite' SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:52:49 8272 (0x2050)
Image OS information : MajorVersionMS = 6, MinorVersionMS = 1, MajorVersionLS = 7601, MinorVersionLS = 17514 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31
8272 (0x2050)
Failed to find properties of file 4 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
UnMounting Image (Commit Changes = 0) ... SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:53:31 8272 (0x2050)
Completed processing image package PackageID. Status = Failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Updated history for image package PackageID in the database SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Schedule processing failed SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
Processing completed for Schedule with ID 16777237 SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:04 8272 (0x2050)
STATMSG: ID=7910 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_OFFLINE_SERVICING_MANAGER" SYS=SCCMServer.domain SITE=Site_Code PID=8560 TID=8272 GMTDATE=Sat Jun 14 13:54:04.964 2014 ISTR0="16777237" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_OFFLINE_SERVICING_MANAGER
14/06/2014 14:54:04 8272 (0x2050)
Schedule processing thread stopped SMS_OFFLINE_SERVICING_MANAGER 14/06/2014 14:54:05 8272 (0x2050)
I'm not sure what file "Failed to find properties of file 4" is referring to, whether dism.exe, an update or the image itself, but immediately after this message appears the image is unmounted. After that this message shows:
"Completed processing image package PackageID. Status = Failed"
As I say, there's a lot of information available re Offline Servicing but I haven't found anything with these particular messages.
If anyone has encountered this before, I'd appreciate any information you have.
Regards,
John.Hi,
I think file named 'NO_SMS_ON_DRIVE.SMS’ might be causing this issue. If this file is present in logical drives, then please give it a shot one more time after deleting this file from the logical drives.
Due to this file, it might be preventing 'smsexec' service to skip the drive when looking for content. So worth a try!
After deleting this file, you also need to restart 'smsexec' service to reflect the changes. You can also verify from below registry value & ensure that all of your logical drives (specially where SCCMContentLib directory resides) should be listed
over there
'HKLM\Software\Microsoft\SMS\DP\ContentLibUsableDrives'
Hope this will help!
Cheers | Navdeep Sidhu -
Failed to find xswebconfig tool via bundle after 10.8.2 update
After updating my OS X 10.8.1 Server to 10.8.2 and the latest version of the server app, any time I launch Server and try to view the services for Web or Wiki, I get the following error: "Error Reading Settings". I see this in the console logs: "Failed to find xswebconfig tool"
Has anyone else seen this?yeah seeing the same error too. Getting it after running this command
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB.sh
From this KB http://support.apple.com/kb/HT5349
Not sure what is going on... don't want to create it new :S -
Windows 8.1 not booting : "Boot manager failed to find OS loader"
Hello all,
I know this question came up before, but I have being trying to fix this for many days now, without luck and I feel I need some new ideas...
The short story:
My Windows 8.1 is not booting, and gets trapped in cycle of Boot Manager until I tell the UEFI to boot from disk or USB
I can boot up from external CD or USB Windows RE, from which I can get to prompt line
In the log file in C:\Windows\System 32\LogFiles\Srt\SrtTrail.txt I read:
Boot manager failed to find OS loader
Repair Action File Repair à Failed (err code 0x4001)
Repair Action Boot Config Data Store Repair à Failed (err code 0x2)
4. My disk is GPT partitioned, with UEFI Bios
5. I tried the typical Bootrec commands: FixMbr, FixBoot, ScanOs, RebuildBCD but I always get the error:
Identified Windows install:0
6. I tried Bcdedit but I get:
the boot configuration data (BCD) store could not be opened
7. I tried to create a new BCD store in the FAT32 partition (temporarily named "v:\") with
bcdboot c:\Windows /l en-gb /s v: /f ALL
but I get:
Failure when attempted to copy boot files
8. Finally, I noticed that in
C:\Windows\System32\
I DO NOT have the file winload.efi
while in: ESP\EFI\Microsoft\Boot\
I DO have the file Bootmgfw.efi
One question I have is: Is it possible to copy a "healthy" winload.efi from somewhere in my PC into C:\Windows\System32\ ?
Where (which path) could I find it?
Any other ideas? Please help !!!!
Many thanks!! This is literarily driving me crazy because I really don't want to reinstall windows....Hello Kermit_70,
What is your current situation?
Please try the suggestion as aw00t mentioned.
Additionally, please try to use Automatic Repair to fix problems that keep Windows from loading.
For more information, please take a look at the following article.
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-windows-8-a.html
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi
New Installation. Sharepoint 2013, Project Server 2013 and SQL Server 2008 SP1 (another box).
When I try to create Project Web App Instance, I get
Provisioning 'PWA': Post provisioning setup failed. Exception 'Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
Followed by:
Failed to provision site PWA with error: Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
Already tried reinstalling the whole farm to no avail. Farm Admin account is used to do everything within this process.
Thanks in anticipation.Hi
I got the same error when provisioning the PWA
Log Name: Application
Source: Microsoft-SharePoint Products-Project Server
Date: 8/29/2013 11:58:12 AM
Event ID: 6966
Task Category: Provisioning
Level: Error
Keywords:
User: abc\administrator
Computer: mycomputer
Description:
Provisioning 'PWA': Post provisioning setup failed. Exception 'Microsoft.SharePoint.SPException: Failed to find Project Site object. Are there any database mounted?
at Microsoft.Office.Project.Server.Administration.ProvisionFeatureEventHandler.FeatureActivated(SPFeatureReceiverProperties properties)
at Microsoft.SharePoint.SPFeature.DoActivationCallout(Boolean fActivate, Boolean fForce)
at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
at Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
at Microsoft.SharePoint.SPFeatureCollection.AddInternalWithName(Guid featureId, Int32 compatibilityLevel, String featureName, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean
fMarkOnly, SPFeatureDefinitionScope featdefScope)
at Microsoft.SharePoint.SPFeatureCollection.AddInternal(Guid featureId, Version version, SPFeaturePropertyCollection properties, Boolean force, Boolean fMarkOnly, SPFeatureDefinitionScope featdefScope)
at Microsoft.SharePoint.SPFeatureCollection.Add(Guid featureId)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureProvisioningFeature(SPSite site)
at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)'.
Later found that the service application where I was trying to provision the PWA, it was not associated with the web-application. -
"failed to find profile ID" on Cellular Interface
Hello World,
I try to make a connection to a Wirelless 3G.
I configure modem and I think that the modem is connected
show cellular 0/0/0 all
Hardware Information
====================
Modem Firmware Version = T1_0_3_2AP R361 CNSZ
Modem Firmware built = 04/15/11
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 546010100686679
International Mobile Equipment Identity (IMEI) = 357115041341178
Integrated Circuit Card ID (ICCID) = 8968701111106200287
Mobile Subscriber International Subscriber
IDentity Number (MSISDN) =
Factory Serial Number (FSN) = CC3322315641011
Modem Status = Online
Current Modem Temperature = 29 deg C, State = Normal
PRI SKU ID = 9900198, SKU Rev. = 1.2
Profile Information
====================
Profile 1 = INACTIVE* **
PDP Type = IPv4
Access Point Name (APN) = USB
Authentication = None
Username:
Password:
* - Default profile
Data Connection Information
===========================
Data Transmitted = 0 bytes, Received = 0 bytes
Profile 1, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 3, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 4, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 5, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 6, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 7, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 8, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 9, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 10, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 11, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 12, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 13, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 14, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 15, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Profile 16, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Network Information
===================
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = UMTS/WCDMA (Attached)
Packet Session Status = Inactive
Current Roaming Status = Home
Network Selection Mode = Automatic
Country = NCL, Network = MOBNCL
Mobile Country Code (MCC) = 546
Mobile Network Code (MNC) = 1
Location Area Code (LAC) = 10
Routing Area Code (RAC) = 1
Cell ID = 30521
Primary Scrambling Code = 434
PLMN Selection = Automatic
Registered PLMN = NCL MOBILIS , Abbreviated = MOBNCL
Service Provider =
Radio Information
=================
Radio power mode = ON
Current Band = WCDMA 2100, Channel Number = 10762
Current RSSI(RSCP) = -63 dBm
Band Selected = Auto
Number of nearby cells = 1
Cell 1
Primary Scrambling Code = 0x1B2
RSCP = -64 dBm, ECIO = -7 dBm
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
GPS Information
==========================
GPS Info
GPS State: GPS disabled
SMS Information
===============
Incoming Message Information
SMS stored in modem = 1
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 60
Storage records used = 1
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Outgoing Message Information
Total SMS sent successfully = 0
Total SMS send failure = 0
Number of outgoing SMS pending = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Last Outgoing SMS Status = SUCCESS
Copy-to-SIM Status = 0x0
Send-to-Network Status = 0x0
Report-Outgoing-Message-Number:
Reference Number = 0
Result Code = 0x0
Diag Code = 0x0 0x0 0x0 0x0 0x0
SMS Archive URL =
Error Information
=================
Cached info is displayed
at!err
QDSP6 ARM9 (not saved)
00 08 uim 08480 00 01 hsu_conf_sel_nv 00572
01 63 gsnvif 00245 01 01 hsu_conf_sel_nv 00616
02 FF cmtask 01162 02 01 timer 03552
03 1B mmglbl 00392
04 1B gsnvif 00478
05 1B rr_init 01597
06 1B rr_init 01601
07 1B rrcdata 08026
08 01 gmmutil 01099
09 01 gmmutil 01118
10 01 gmmutil 01141
11 01 gmmutil 01156
12 01 gmmutil 01174
13 01 gmmutil 01198
14 14 rrcllcp 16550
15 04 rrccspf 02198
16 17 rrccsp 20686
17 04 gsdi 09787
18 01 gsdi_co 01538
19 1B cnlbs 03307
OK
at!gcdump
No crash data available
OK
Modem Crashdump Information
===========================
Modem crashdump logging: off
I have the following config
chat-script OPT3G "" "ATDT*99***1#"
interface Cellular0/0/0
ip address negotiated
ip virtual-reassembly in
encapsulation slip
no ip route-cache
load-interval 60
dialer in-band
dialer string OPT3G
dialer-group 1
async mode interactive
interface Cellular0/0/1
no ip address
encapsulation slip
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 Cellular0/0/0
dialer-list 1 protocol ip permit
access-list 1 permit any
line 0/0/0
exec-timeout 0 0
script dialer OPT3G
login
modem InOut
no exec
transport input all
transport output all
autoselect during-login
autoselect ppp
line 0/0/1
exec-timeout 0 0
script dialer OPT3G
login
modem InOut
no exec
transport input all
I make debug
debug chat
debug cellular 0/0/0 messages all
I try to start the interface
Sending 5, 100-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds:
*Jul 22 07:08:31.363: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 96 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0D
*Jul 22 07:08:32.283: CHAT0/0/0: Attempting async line dialer script
*Jul 22 07:08:32.283: CHAT0/0/0: Dialing using Modem script: OPT3G & System script: none
*Jul 22 07:08:32.283: CHAT0/0/0: process started
*Jul 22 07:08:32.283: CHAT0/0/0: Asserting DTR
*Jul 22 07:08:32.283: CHAT0/0/0: Chat script OPT3G started
*Jul 22 07:08:32.283: CHAT0/0/0: Sending string: ATDT*99***1#
*Jul 22 07:08:32.283: CHAT0/0/0: Chat script OPT3G finished, status = Success.
*Jul 22 07:08:34.283: %LINK-3-UPDOWN: Interface Cellular0/0/0, changed state to up
*Jul 22 07:08:34.283: cellular_dip_ip_address_negotiated: failed to find profile ID for Cellular0/0/0
*Jul 22 07:08:34.363: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 97 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3F 00 0C
*Jul 22 07:08:35.283: %LINEPROTO-5-UPDOWN: Line protocol on Interface Cellular0/0/0, changed state to up.
*Jul 22 07:08:36.283: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0
*Jul 22 07:08:36.835: [Cellular0/0/0]:MGMT RX (HEARTBEAT) (14 bytes):
00 0A 6B 98 00 00 07 00 00 00 00 00 00 00
*Jul 22 07:08:37.363: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 99 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0C
*Jul 22 07:08:38.283: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0.
*Jul 22 07:08:40.283: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0
*Jul 22 07:08:40.367: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9A 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 40 00 0F
Success rate is 0 percent (0/5)
RTR-TEST98#
*Jul 22 07:08:43.371: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9B 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3C 00 11
*Jul 22 07:08:43.835: [Cellular0/0/0]:MGMT RX (HEARTBEAT) (14 bytes):
00 0A 6B 9C 00 00 07 00 00 00 00 00 00 00
*Jul 22 07:08:46.375: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9D 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0D
*Jul 22 07:08:49.379: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B 9E 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0C
*Jul 22 07:08:50.835: [Cellular0/0/0]:MGMT RX (HEARTBEAT) (14 bytes):
00 0A 6B 9F 00 00 07 00 00 00 00 00 00 00
*Jul 22 07:08:52.383: [Cellular0/0/0]:MGMT RX (RSCP_ECIO) (24 bytes):
00 14 6B A0 70 0B 07 00 00 00 00 00 00 0A 00 01
00 01 01 B2 00 3E 00 0Ehello everyone,
I still have my issue and can't connect my 3G interface.
I can complete my issue with this log
*Aug 12 08:35:34.023: cellular_dip_ip_address_negotiated: failed to find profile ID for Cellular0/0/0
*Aug 12 08:35:38.019: cellular_dip_cell_set_encap_whip: Invalid profile ID 255 for Cellular0/0/0
Thank's for your help. -
I had been using acrobat 9.5.3 updated through the years form 9.0 that came with my Scansnap.
However since I refreshed my windows 8.1 with a ssd drive and w8,1 instal from scratch., the acrobat.standard 9.0 just fail to find update
and I tried downloading the patches from the adobe sites using the recomended path
Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) ->
9.4.0 (Quarterly) -> 9.4.2 (Quarterly) -> 9.4.5 (Quarterly) -> 9.4.6 (Quarterly) -> 9.5.0 (Quarterly) -> 9.5.1 (Quarterly)-> 9.5.2 (Quarterly)->
9.5.3 (Quarterly)-> 9.5.5 (Quarterly)
however the update refused to aply even at 9.1.0
what can I do?The cleaner says it should only be used after regular uninstall fails.
I tried changed the install to full install not skipping lang and doc support. no effect, tried repair no effect
tried deactivate and uninstall, reboot, ran the cleaner just in case and it found nothing to clean.
installed with typical settings. reboot, tried to
opened acrobat, help, update, no upd avail.
apply AcrobatUpd910_all_me_incr.msp. no luck
I look at registry, found no entry for adobe under HKLM software, only in HKCU
Is that a problem for the update?
Did find HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Adobe Acrobat\9.0\FeatureLockDown
and HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Adobe Acrobat, HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat PDFMaker,
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Distiller\9.0,
However, I ran the Microsoft Mr Fixit, and it found no problem with the installation of acrobat.
I'm confused what to do -
SP3 Upgrade fails to find Weblogic Server 6.1 installed
Hello,
I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install it on
are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem im encounting,
when i install the service pack, is that the installer fails to find my install of
weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/). I have tried
several ways of installing it, and all so far have failed. Anyone else had this problem
Thanks
Bobby
Below is a snippet of the install .
Choose BEA Home Directory
1- /bea
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.1 not found
WebLogic Server Service Pack 3 Installation failed.
You do not seem to have WebLogic Server 6.1
installed for BEAHOME /bea.
Exiting the Service Pack 3 installer...:I had the same problem , the solution I found was to edit the file registry.xml (in
the same directory as the license file).
In my case the installation files where copied from another installation and had
the wrong information in the registry.xml about paths and machine name
Regards
Ulf
"Bobby" <[email protected]> wrote:
>
Hello,
I have just downloaded SP3 for WLS 6.1. The machine´s im trying to install
it on
are a Sun box with solaris 8 and an intel box with redhat 7.2, the problem
im encounting,
when i install the service pack, is that the installer fails to find my
install of
weblogic 6.1 (on both machines its a default install /bea/wlserver6.1/).
I have tried
several ways of installing it, and all so far have failed. Anyone else had
this problem
Thanks
Bobby
Below is a snippet of the install .
Choose BEA Home Directory
1- /bea
Existing BEA Home: 1
===============================================================================
WebLogic Server 6.1 not found
WebLogic Server Service Pack 3 Installation failed.
You do not seem to have WebLogic Server 6.1
installed for BEAHOME /bea.
Exiting the Service Pack 3 installer...: -
Cannot connect to itunes "Failed to find Service Connection URL"
I'm trying to connect to itunes with my apple ID (on macbook pro) and I keep getting the error message: "ConnectionManager::Invoke::failed to find service connetion url" I've tried resetting my password, reinstalling itunes and I've checked I'm not connected the app store.
Please help it's sending me insane!I had the same issue since installing the new iTunes. Log out of iTunes (logging back in did not fix the problem for me). I performed a safe boot (restart your laptop and hold down the shift key until the login screen appears). Log in, open disk utility in the applications/utilities folder, and run disk repair. Restart your computer and login to iTunes. This fixed the problem for me.
-
TS1424 Message saying...Connection Manager invoke failed to find service connection URL why?
When I go to sign in it iTunes a message comes up stating: Connection Manager::invoke::Failed to find service connection url. Does anyone know what this means and how to fix this issue?
Check over on the right side of the thread here under More Like This. Look for one that has a green checkmark which means it is answered. I have read of this however, I do not know how to solve it. It seems as though it is one particular carrier this happens to.
-
Tried to use my apple id to update some apps and got"Connection Manager::invoke:: Failed to find service connection url" After this occured a few times I reset the id password, and this was confirmed by email. It still fails with same message. Ideas?
Hi, you have to logout from your iTunes account and reconnect it:
Settings / iTunes & App Stores / ...
https://mobilfunkexperten.de/news/13450/sporadische-probleme-im-itunes-und-app-s tore
Hope this helps... :-)
Maybe you are looking for
-
How do I update the software on my 1st gereration ipod touch?
I bought an original 1st generation ipod touch and want to know if anyone knows how to update the software so i can sync apps and games? I am new to this device... please help!
-
Is there a way to get help even if I have to pay? Haven't gotten help here
I haven't gotten help here on the question I posted...see below. Is there another source of help, even if I have to pay for it? thanks I copied my iTunes folder to an external drive as a backup. (I suppose I should have "exported" it.) Then that comp
-
Error Starting Weblogic Console
I am getting the following error while starting weblogic 5.1 console under solaris. Please help. Exception in thread "main" java.lang.UnsatisfiedLinkError: no awt in java.library.path at java.lang.Throwable.fillInStackTrace(Native Method) at java.lan
-
Creating an e-mail with excel file attachment
Morning, Does anyone know how to create an e-mail with a spreadsheet attachment (in foreground and background). I can create an e-mail (in foreground and background) with a text (tab delimited) file attachment with a suffix of .xls. I have created th
-
I'm recording an application demo, and having trouble getting the mouse movements to appear "natural." For example, say that my project contains 4 slides, each 10 seconds long: * On Slide 1 (Window #1), the mouse moves to point A and clicks to select