Failed to get d-bus connection
i just did a fresh install, following the installation guide. after reboot, i get to the grub menu, then start linux.
after that i get the error message
systemd-cgroups-agent(154): failed to get d-bus connection: faile (sic!)
this message appears several times, then
welcome to emergency mode (...)
after login nothing works, i cannot even reboot, only get d-bus errors. have to hard reset the computer. fallback is the same. anyone know whats wrong?
@ubunchu, if the system is unusable after login, how is the OP supposed to issue your suggested command?
The part of ubunchu's response that makes the most sense to me is the chroot part, as it involves booting from live media to inspect. I don't think you actually have to chroot to do this, but see about inspecting the journal from the live media. Mount the rootfs (and var if applicable), then use journalctl's --directory= argument to point it to your mounted system's journal. Otherwise, you could chroot into the system and use journalctl there. But I am not sure if journalctl requires a running dbus. If it does, you don't be able to see the journal. (Okay, I just tested this, and it seems you can run journalctl from a chroot)
Similar Messages
-
'systemctl --user status' returns 'Failed to get D-Bus connection'
Basically I am trying to run a user session of systemd. Up to now, this worked without doing the additional parts from the systemd/User wiki-page. Now it returns 'Failed to get D-Bus connection: No such file or directory' or 'Failed to read server status: Input/output error' (the first one when I try it from the TTY, the second one from within xfce / urxvtc). Even after doing the wiki-page, it still returns the two error messages.
My current 'systemctl status':
● SHODAN
State: running
Jobs: 0 queued
Failed: 0 units
Since: Fr 2014-04-25 18:33:55 CEST; 6min ago
CGroup: /
├─1 /sbin/init
├─system.slice
│ ├─rtkit-daemon.service
│ │ └─466 /usr/lib/rtkit/rtkit-daemon
│ ├─polkit.service
│ │ └─376 /usr/lib/polkit-1/polkitd --no-debug
│ ├─lightdm.service
│ │ ├─279 /usr/bin/lightdm
│ │ └─283 /usr/sbin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch
│ ├─systemd-logind.service
│ │ └─276 /usr/lib/systemd/systemd-logind
│ ├─dbus.service
│ │ └─274 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
│ ├─wicd.service
│ │ ├─273 /usr/bin/python2 -O /usr/share/wicd/daemon/wicd-daemon.py --no-daemon
│ │ ├─289 /usr/bin/python2 -O /usr/share/wicd/daemon/monitor.py
│ │ └─365 wpa_supplicant -B -i wlp4s0 -c /var/lib/wicd/configurations/00184db47218 -Dwext
│ ├─systemd-udevd.service
│ │ └─143 /usr/lib/systemd/systemd-udevd
│ └─systemd-journald.service
│ └─119 /usr/lib/systemd/systemd-journald
└─user.slice
└─user-1000.slice
└─session-c2.scope
├─ 314 lightdm --session-child 13 20
├─ 352 /bin/sh /etc/xdg/xfce4/xinitrc -- /etc/X11/xinit/xserverrc
├─ 359 dbus-launch --sh-syntax --exit-with-session
├─ 362 /usr/bin/dbus-daemon --fork --print-pid 4 --print-address 6 --session
├─ 374 xfce4-session
├─ 384 /usr/lib/xfce4/xfconf/xfconfd
├─ 395 /usr/bin/gpg-agent --sh --daemon --enable-ssh-support --write-env-file /home/dustball/.cache/gpg-agent-info
├─ 411 xfwm4
├─ 419 xfce4-panel
├─ 421 Thunar --daemon
├─ 423 xfdesktop
├─ 425 urxvtd
├─ 448 python2 /usr/bin/quicktile -d
├─ 465 /usr/bin/pulseaudio --start --log-target=syslog
├─ 480 /usr/bin/python2 -O /usr/share/wicd/gtk/wicd-client.py --tray
├─ 481 grep -v Unhandled action type _OB_WM
├─ 482 xfsettingsd
├─ 483 xfce4-volumed
├─ 488 mpd
├─ 504 /usr/lib/pulse/gconf-helper
├─ 506 /usr/lib/GConf/gconfd-2
├─ 525 /usr/lib/xfce4/notifyd/xfce4-notifyd
├─ 529 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libsystray.so 6 12583017 systray Benachrichtigungsfl che Fl che, in der Symbole f r Benachrichtigungen erscheinen
├─ 531 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libactions.so 2 12583018 actions Aktionskn pfe Abmelden, sperren oder andere Systemaktionen
├─ 532 /usr/lib/xfce4/panel/wrapper /usr/lib/xfce4/panel/plugins/libmixer.so 16 12583019 mixer Lautst rkeregler Lautst rke einstellen
├─ 548 xfce4-appfinder --collapsed
├─ 555 /usr/bin/python2 /usr/bin/sonata
├─1131 /usr/lib/chromium/chromium --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-print-preview
├─1132 liferea
├─1133 claws-mail
├─1134 kvirc -m
├─1135 /usr/lib32/skype/skype
├─1176 /usr/lib/chromium/chromium --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-print-preview
├─1177 /usr/lib/chromium/chrome-sandbox /usr/lib/chromium/chromium --type=zygote --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206
├─1178 /usr/lib/chromium/chromium --type=zygote --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206
├─1181 tmux new-session
├─1184 tmux new-session
├─1185 -zsh
├─1268 /usr/lib/at-spi2-core/at-spi-bus-launcher
├─1567 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
├─1588 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
├─1600 /usr/lib/chromium/nacl_helper
├─1755 /usr/lib/chromium/chromium --type=zygote --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206
├─1824 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.1.59959206
├─1847 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.2.164356213
├─1857 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.3.96609819
├─1871 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.4.134029888
├─1880 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.6.5115895
├─1886 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.7.176936345
├─1891 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.8.160718626
├─1896 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.9.165553601
├─1940 /usr/lib/dconf/dconf-service
├─2013 /usr/lib/chromium/chromium --type=gpu-process --channel=1131.12.1289180957 --supports-dual-gpus=false --gpu-driver-bug-workarounds=0,1,17,28,34 --disable-accelerated-video-decode --gpu-vendor-id=0x10de --gpu-device-id=0x0425 --gpu-driver-vendor=NVIDIA --gpu-driver-version=337.1
├─2025 /usr/lib/chromium/chromium --type=gpu-process --channel=1131.12.1289180957 --supports-dual-gpus=false --gpu-driver-bug-workarounds=0,1,17,28,34 --disable-accelerated-video-decode --gpu-vendor-id=0x10de --gpu-device-id=0x0425 --gpu-driver-vendor=NVIDIA --gpu-driver-version=337.1
├─2105 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --extension-process --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.16.111786888
├─2121 bash /usr/bin/steam
├─2131 bash /home/dustball/.local/share/Steam/steam.sh
├─2132 tee /tmp/dumps/dustball_stdout.txt
├─2226 /home/dustball/.local/share/Steam/ubuntu12_32/steam
├─2415 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.18.32337900
├─2423 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.19.132593708
├─2432 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.20.6353944
├─2452 /usr/lib/chromium/chromium --type=renderer --lang=de --force-fieldtrials=Prerender/PrerenderControl/UMA-New-Install-Uniformity-Trial/Experiment/UMA-Session-Randomized-Uniformity-Trial-5-Percent/group_09/UMA-Uniformity-Trial-1-Percent/group_21/UMA-Uniformity-Trial-10-Percent/group_03/UMA-Uniformity-Trial-100-Percent/group_01/UMA-Uniformity-Trial-20-Percent/group_01/UMA-Uniformity-Trial-5-Percent/group_11/UMA-Uniformity-Trial-50-Percent/default/ --renderer-print-preview --ppapi-flash-path=/usr/lib/PepperFlash/libpepflashplayer.so --ppapi-flash-version=13.0.0.206 --enable-deadline-scheduling --disable-accelerated-video-decode --channel=1131.22.126548679
├─2465 /usr/lib/chromium/chromium --type=ppapi --channel=1131.23.955061051 --ppapi-flash-args --lang=de
└─2685 systemctl statusI did the dbus-setup according to the systemd/User part in the wiki.
$ cd $XDG_RUNTIME_DIR/systemd/ && ls -lah |grep private && pwd
srwxr-xr-x 1 dustball dustball 0 25. Apr 22:13 private
/run/user/1000/systemd
Do I need to enable the dbus somehow else than via
sudo systemctl --global enable dbus.socket -
Systemctl error: Failed to get D-Bus connection
Problem migrating server to pure systemd. Unable to start stop or restart any of my enabled services. Every command to systemctl except enable/disable results in:
"Failed to get D-Bus connection: No connection to service manager."
I dunno why enable/disable would work but not status, etc...
Quick note on my environment:
Arch installed on my remote server hosted by linode.com
So, my only access is remote ssh. This is purely a webserver/mailserver type box.
Here's what I did so far:
1) installed systemd and depys according to this guide https://wiki.archlinux.org/index.php/Systemd
2) enabled all services from my rc.conf DAEMONS according to this guide: https://wiki.archlinux.org/index.php/Daemons_List
systemctl enable {foo}.service
3) removed initscripts with
pacman -R initscripts
and installed systemd-sysvcompat w/
pacman -S systemd-sysvcompat
4) rebooted
5) I can confirm that "cat /proc/1/comm" does in fact output "systemd"
Command " sudo ps aux | grep dbus " gives me:
dbus 1781 0.0 0.2 3076 1352 ? Ss 12:33 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
Command "netstat antp |grep dbus" give me:
unix 3 [ ] STREAM CONNECTED 4414 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 4403 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 4401 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 4370 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 4369 /run/dbus/system_bus_socket
I feel I'm almost there and must be missing something stupid...
Please help
Here's a list of services from /etc/systemd/system/multi-user.target.wants
NetworkManager.service
clamd.service
dcron.service
dovecot.service
fail2ban.service
freshclamd.service
iptables.service
nginx.service
ntpd.service
postfix.service
postgrey.service
remote-fs.target
spamassassin.service
spawn-fcgi-php.service
sshd.service
syslog-ng.service
DAEMONS is the only variable in my rc.conf. Here it is:
DAEMONS=(syslog-ng iptables network netfs crond sshd ntpd fail2ban mysqld spamd postgrey dovecot postfix nginx spawn-fcgi-php clamav)
systemd man page that: "systemd uses control groups to effectively keep track of processes. Control group information is maintained in the kernel, and is accessible via the file system hierarchy (beneath /sys/fs/cgroup/systemd/)" I ran the command "findmnt | grep /sys/fs/cgroup" but it returns an empty result...
Last edited by bx (2012-11-29 22:58:06)Solved! Had to update kernel. Solution was in /var/log/kernel.log all along:
Nov 27 14:43:56 xxxx kernel: systemd[1]: CONFIG_CGROUPS was not set when your kernel was compiled. Systems without control groups are not supported. We will now sleep for 10s, and then continue boot-up. Expect breakage and please do not file bugs. Instead fix your kernel and enable CONFIG_CGROUPS. Consult http://0pointer.de/blog/projects/cgroups-vs-cgroups.html for more information.
systemd man page that: "systemd uses control groups to effectively keep track of processes. Control group information is maintained in the kernel, and is accessible via the file system hierarchy (beneath /sys/fs/cgroup/systemd/)" I ran the command
findmnt | grep /sys/fs/cgroup
but it returns an empty result...
I did not see kernel version as a requirement anywhere in docs...
To check your kernal version use command:
uname -r
From the main page https://wiki.archlinux.org/index.php/Systemd
systemd is a system and service manager for Linux that ... uses socket and D-Bus activation for starting services ... keeps track of processes using Linux control groups ...
From wikipedia http://en.wikipedia.org/wiki/Cgroups
cgroups (control groups) is a Linux kernel feature to that was started in 2007 ... and merged to kernel version 2.6.24 ...
I had problems w/ kernel 2.6.39 which turned out to be a deprecated kernal on my linode. My box had like 300+ days of uptime and never had a need to reboot before the change to systemd. Lucky for me, linode made it stupid easy to update the kernel and i was back on track. systemd is cool. worth the journey. thanks!
Last edited by bx (2012-11-29 23:14:02) -
Systemd-cgroups-agent[625]: Failed to get D-Bus connection
On shutdown, or reboot this error appears:
systemd-cgroups-agent[625]: Failed to get D-Bus connection: Failed to connect to socket /org/freedesktop/systemd1/private: Connection refused
system is:
Linux desktop 3.9.2-1-ARCH #1 SMP PREEMPT Sat May 11 21:11:14 CEST 2013 i686 GNU/Linux
XFCE4 with SLIMhttps://bbs.archlinux.org/viewtopic.php?pid=1273875
-
[SOLVED] systemd --user: "Failed to open private bus connection:"
EDIT: The solution was to set DBUS_SESSION_BUS_ADDRESS, as suggested by gtmanfred in irc. By putting the following before executing systemd --user, the error vanished:
export DBUS_SESSION_BUS_ADDRESS=/run/user/$(id -u)/dbus/user_bus_socket
===================
Original problem:
Everything on my box appears to be working ok, but I'm getting this error consistently in tty1 and at the top of journalctl (as user) whenever I start systemd --user:
systemd[3975]: Failed to open private bus connection: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
I roughly have my system setup per this wiki section https://wiki.archlinux.org/index.php/Sy … ur_Session. I start systemd --user via a small script in my .bash_profile. Here are my relevant dbus{.service,socket} files, from the package user-session-units mentioned in the wiki: (Edit: xorg is started through xorg-launch-helper, also from that wiki page) Edit2: I'm not using autologin. I noticed that under the autologin section of that page, DBUS_SESSION_BUS_ADDRESS is set to some path. In my setup that isn't set anywhere, so I may try to copy that later but I don't have time to play with it right now. Will post back later.
=====/usr/lib/systemd/user/dbus.service=====
[Unit]
Description=D-Bus System Message Bus
Requires=dbus.socket
[Service]
ExecStart=/usr/bin/dbus-daemon --session --address=systemd: --nofork --systemd-activation
ExecReload=/usr/bin/dbus-send --print-reply --session --type=method_call --dest=org.freedesktop.DBus / org.freedesktop.DBus.ReloadConfig
=====/usr/lib/systemd/user/dbus.socket=====
[Unit]
Description=D-Bus System Message Bus Socket
[Socket]
ListenStream=%t/dbus/user_bus_socket
And the output of sudo systemctl status dbus:
dbus.service - D-Bus System Message Bus
Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
Active: active (running) since Tue 2013-02-05 14:50:30 EST; 22min ago
Main PID: 369 (dbus-daemon)
CGroup: name=systemd:/system/dbus.service
└─369 /usr/bin/dbus-daemon --system --address=systemd: --no...
Feb 05 14:50:30 sellers-laptop systemd[1]: Starting D-Bus System Message Bus...
Feb 05 14:50:30 sellers-laptop systemd[1]: Started D-Bus System Message Bus.
Feb 05 14:51:18 sellers-laptop dbus-daemon[369]: dbus[369]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Feb 05 14:51:18 sellers-laptop dbus[369]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Feb 05 14:51:18 sellers-laptop dbus[369]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Feb 05 14:51:18 sellers-laptop dbus-daemon[369]: dbus[369]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
I'm not sure what the error even means or how to go about debugging it. Any suggestions would be appreciated.
Last edited by Feynman (2013-02-05 22:07:23)NVM...didn't notice it was already solved.
Last edited by the sad clown (2013-02-05 22:33:10) -
Happens with annoying frequency. The fresh install of 32.0 is barely a month old but this has been happening since a few days afterwards. I have let the update window run for up to 20 minutes. Nothing happened, ever. Apparently it never actually connects. Nor will it update automagically when I click on the "About" line on the Firefox menu bar dropdown.
If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 32.0.3: https://www.mozilla.org/en-US/firefox/all.html
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
I keep getting an error pop-up when I try to access my email. The pop-up says Cannot Get Mail The connection to the server failed. I get this pop-up on both my iPhone 5 and my iPad. I can still access my email, but the pop-up is real annoying. Can someone please help me with this? -Stu
Hi StuNYC,
Welcome to Apple Support Communities.
It sounds like you're seeing an alert message when opening Mail on your iOS devices. Do you have multiple email accounts setup on the devices? Take a look at the article below, it provides suggestions that will resolve most issues that cause an alert like that to appear in when starting the Mail app.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
I hope this helps.
-Jason -
My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same problem and have found a solution - only stated happening since iPhone was updated .
Hello there, Badboymbc.
The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Whenever I try to log in to my account or redeem gift cards, I get a message saying "Connection Manager Invoke Failed to find a service connection url". I changed my password, logged out and the same thing keeps happening. Does anyone have a solution for this?
Hello,
Try to go to the settings on your phone... Settings > Store > Click your Apple ID: And sign out from your account, then sign in again .... This solved the problem for me on my iPhone 4s -
I can't log on to my itunes account. Keep getting the error: "Connection Manager::invoke::Failed to find service connection url". What can I do?
Hi, Buster1932.
I would recommend logging out of your account then logging back in. If the issue persists, see the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
Failed to get connection-; Root exception is: java.lang.NullPointerExceptio
Hi:
When I login Applications, click on any OAM got the following errors. All the forms are good.
An error has occurred!
Failed to get connection-; Root exception is: java.lang.NullPointerException
I don't know when started to be like that but I applied some patches yesterday. Thank you for your help in advance.Hi;
You dont need to check log file. Please check apache log file for error details.
By the way did you try to
1. close apps services
2. run autoconfig on dbtier than
3. run autoconfig on appstier and be sure you dont have any error message,than recheck issue
Regard
Helios -
On my hotmail email, a sign comes up saying *cannot get mail* the connection to the server failed
i have a new itouch and have hotmail as my email account, today 21stn july 2012, when i went onto my mail account, a sign saying the following
cannot get mail the connection to the server failed, what do i do now as i am not receiving any emails and my junk box is missing ?Hi kristafromne!
I have an article here that I believe will help you with this issue. This article is about troubleshooting email accounts on your iPhone and can be found here:
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Cannot Get Mail - The connection to the server failed. iPhone 3GS & Hotmail
I've got an iPhone 3GS and I'm using Hotmail.
I'm geting the same error message over and over - "Cannot Get Mail - The connection to the server failed.". Out of the blue it started on my phone, but then the email worked again for a day after, and then quit working again. I've tried deleting and adding it as a new account. I tried to go back to what might have in-part caused the problem, and the only thing I had done over the weekend was to turn iCloud on and start backing up to it, but the e-mail did work after that for a couple days. I've tried a couple different Hotmail accounts to see if it was a corrupt e-mail in one account, but both accounts give me the same "Cannot Get Mail" response. Creating the "TEMP" folder on Hotmail and moving e-mails there did not work.
Could anyone spell out in layman's (non-IT) terms what I might be able to try?Who is the provider? Do you have two-step verification turned on? Did they change something on their end?
-
I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet." Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages? When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.
You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.
-
Is anyone getting this message when trying to access Yahoo Email? "Cannot Get Mail, The connection to the server failed?"
I have Yahoo mail (POP) account. Mine is working fine at present. I do occasionally get asked for password while sending mail. I have had your issue in the past and it usually clears up in a few hours. Sometimes I sign out and then back in and it starts working again.
Maybe you are looking for
-
Wipe Hard Drive/Fried Logic Board
How do I wipe Hard Drive clean when G4 Powerbook will not start up due to fried logic board? I can wait 3 weeks, and One to One will tell me at Apple...lol...
-
Connecting two Acer monitors with VGA and DVI output to my Macbook Pro (mid 2010)
Hi All, I need to connect 2 Acer monitors that have both VGA and DVI ports to my MacBook Pro. What's the best way to do that? Thanks for your help!
-
Help - Can't open Word for Windows docs because of "Spelling Checker" error
Since updating to the new Pages of iWork 08, I've started having consistent problems opening Word documents sent to me from Windows using colleagues. When I open the .doc in Pages, an error message appears saying "Alert: Couldn't contact Spell Checke
-
How to create entity reference in DOCTYPE
Hi, I am having trouble creating entity nodes in the doctype line Something like this <!DOCTYPE model SYSTEM "/my/local/copy/of/the/cellml_1_0.dtd" [ <!ENTITY % mathml_dtd_path "'relative/path/to/mathml2.dtd'"> <!ENTITY % use_mathml_dtd "INCLUDE"> ]>
-
How to get past 6700 not recognizing new print heads.
Ok, so I bought a new printer that came with setup cartridges. I wanted one with network capabilites so I took it back to the store and got a new hp 6700 all in one. But when I took the other one back I forgot to include the start upcartridges in t