Failed to get dispatch from IBrwsr2! PHTML is null!

Anyone figure out why this is happening? So frustrating: - (

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

Similar Messages

Receiver AS2 Adapter issue.....Failed to get configuration from DATABASE. S

Hi,
Iam doing prototyping for File -AS2 adapter and ended up with below erros.
Error type: COMPONENT_ERROR >> Error date: 6/17/11 8:04 AM >> Description: AS2 Adapter failure Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:379) [6/17/11 8:04 AM]
and
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing..
The setting i have made during configation are :
1> Reciver Party with Agency,Schema and Name entered.
2>Identifiers for both Sender and reciver channel fileld with values seeburger and AS2ID.
3>Used Sender uses Virtual reciver in sender aggremnet.
4> Reciever CC have modules localejbs/Seeburger/solution/as2 and localejbs/ModuleProcessorExitBean in sequence.
Please provide solutions to overcome the issue.
As this is prototyping, i have downloaded Free As2 client and trying to send files to that client from PI.

Hi Dinesh,
make sure to also configure a report channel (refer to the sample chapter in the SEEBURGER AS2 documentation) in order to receive AS2 MDNs for your sent message. Additionally report channels are needed if the SEEBURGER specific TransmissionReports are requested.
Hope that helps
Greetings
-Sascha-

Failed to get configuration from secure gateway. Contact your system administrator.

I have an ASA 5515 running 9.1(1).
One of my customers is attempting to connect with AnyConnect 3.1.02040 and after authenticating, he gets the message
Failed to get configuration from secure gateway. Contact your system administrator.
I have about 100 other customers who have not had this issue and can connect fine.
Since it appears to be localized to his PC, he's uninstalled and reinstall the client, but to no avail. He's using Windows 7 Pro.
On the ASA, while he is attempting to connect, I see this:
15:48:04|302014|<<<REMOTE IP>>>|51032|<<<ASA IP>>>|443|Teardown TCP connection 495403 for outside:<<<REMOTE IP>>>/51032 to identity:<<<ASA IP>>>/443 duration 0:00:00 bytes 8241 TCP Reset-I
14:48:04|725007|<<<REMOTE IP>>>|51032|||SSL session with client outside:<<<REMOTE IP>>>/51032 terminated.
14:48:04|113039|||||Group <GroupPolicy_AnyConnect> User <etpdeir> IP <<<<REMOTE IP>>>> AnyConnect parent session started.
14:48:04|734001|||||DAP: User etpdeir, Addr <<<REMOTE IP>>>, Connection AnyConnect: The following DAP records were selected for this connection: DfltAccessPolicy
14:48:04|113008|||||AAA transaction status ACCEPT : user = etpdeir
14:48:04|113019|||||Group = ibmdtsc, Username = etpdeir, IP = 124.128.162.43, Session disconnected. Session Type: AnyConnect-Parent, Duration: 0h:41m:41s, Bytes xmt: 885580, Bytes rcv: 1343, Reason: Connection Preempted
14:48:04|716002|||||Group <GroupPolicy_AnyConnect> User <etpdeir> IP <<<<REMOTE IP>>>> WebVPN session terminated: Connection Preempted.
14:48:04|113009|||||AAA retrieved default group policy (GroupPolicy_AnyConnect) for user = etpdeir
14:48:04|113004|||||AAA user authentication Successful : server = 172.29.128.126 : user = etpdeir
14:48:04|725002|<<<REMOTE IP>>>|51032|||Device completed SSL handshake with client outside:<<<REMOTE IP>>>/51032
14:48:03|725001|<<<REMOTE IP>>>|51032|||Starting SSL handshake with client outside:<<<REMOTE IP>>>/51032 for TLSv1 session.
15:48:03|302013|<<<REMOTE IP>>>|51032|<<<ASA IP>>>|443|Built inbound TCP connection 495403 for outside:<<<REMOTE IP>>>/51032 (<<<REMOTE IP>>>/51032) to identity:<<<ASA IP>>>/443 (<<<ASA IP>>>/443)
Any ideas?

i had this problem. for me the cause had to do with internet explorer TLS settings.
in IE8 go to tools, internet options, advanced and under security I had to make sure Use TLS 1.0 was checked (only Use SSL 3.0 and Use TLS 1.1 were checked. I left them checked.).

Failed to get schema from the dynamic feed (example.php).

Hi,
I've been trying to get the schema from an exported xml file
ex. example.php
(using Developer Toolbox).
But it keeps saying "
Failed to get schema from the dynamic feed (example.php)."
Any help?
Thanks
Wald

Here's the file:
data.php, I can see it
correctly in the browser except of the style information that are
missing.
Code:
<?php require_once('../Connections/example.php'); ?>
<?php
// Load the XML classes
require_once('../includes/XMLExport/XMLExport.php');
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType,
$theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue)
: $theValue;
$theValue = function_exists("mysql_real_escape_string") ?
mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) .
"'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" :
"NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue :
$theNotDefinedValue;
break;
return $theValue;
mysql_select_db($database_example, $example);
$query_data = "SELECT * FROM example";
$data = mysql_query($query_data, $example) or
die(mysql_error());
$row_data = mysql_fetch_assoc($data);
$totalRows_data = mysql_num_rows($data);
// Begin XMLExport data
$xmlExportObj = new XMLExport();
$xmlExportObj->setRecordset($data);
$xmlExportObj->addColumn("Name", "Name");
$xmlExportObj->addColumn("Damage", "Damage");
$xmlExportObj->addColumn("Speed", "Speed");
$xmlExportObj->addColumn("Level", "Level");
$xmlExportObj->addColumn("Details", "Details");
$xmlExportObj->addColumn("Type", "Type");
$xmlExportObj->addColumn("Source", "Source");
$xmlExportObj->addColumn("Location", "Location");
$xmlExportObj->addColumn("Date", "Date");
$xmlExportObj->addColumn("Price", "Price");
$xmlExportObj->addColumn("Skill", "Skill");
$xmlExportObj->addColumn("Constitution", "Constitution");
$xmlExportObj->addColumn("Intelligence", "Intelligence");
$xmlExportObj->addColumn("Wisdom", "Wisdom");
$xmlExportObj->addColumn("Strength", "Strength");
$xmlExportObj->addColumn("Member", "Member");
$xmlExportObj->addColumn("Image", "Image");
$xmlExportObj->setMaxRecords("ALL");
$xmlExportObj->setDBEncoding("ISO-8859-1");
$xmlExportObj->setXMLEncoding("ISO-8859-1");
$xmlExportObj->setXMLFormat("NODES");
$xmlExportObj->setRootNode("Category");
$xmlExportObj->setRowNode("Type");
$xmlExportObj->Execute();
// End XMLExport data
?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>example</title>
<link href="css.css" rel="stylesheet" type="text/css"
/>
</head>
<body>
</body>
</html>
<?php
mysql_free_result($data);
?>
Thanks again

Select statement failed to get data from transparent table

Hi Experts,
                  Please let me know why my select statement is failing to get data form transparent table REGUH. My code query is as below:
SELECT * FROM REGUH WHERE
                          LAUFD = RUN_DATE AND
                          LAUFI = ID AND
                          LIFNR = P0009-PERNR AND
                          RZAWE = 'C'.
MOVE REGUH-RWBTR TO CASH.
      CASH = CASH * -1.
ENDSELECT.
REGUH table has data for the given query but it is not retreiving the data.Please let me know what is the problem with the query
because of which it is not fetching the data.The same query is working fine in Developement but fails in production may be because one new patch is updated.please help asap.

Hi Ankita,
Why you are going for select *
Try This...
SELECT SINGLE RWBTR
              INTO v_RWBTR
              WHERE LAUFD = RUN_DATE
               AND LAUFI = ID
               AND LIFNR = P0009-PERNR
               AND RZAWE = 'C'.
MOVE v_RWBTR TO CASH.
CASH = CASH * -1.
Regards,
Raj.

Windows Server 2012R2 fails to get update from WSUS with error code 80072ee6

Hi all,
I've deployed WSUS role on a Windows Server 2012R2 machine. WSUS listen on port 8530. Now I'm trying a test server (this machine runs WIndows Server 2012R2 too). I've configured a GPO but when I try to check for updates I get the errore in the subject.
I've checked windowsupdate.log and theese are the settings of the client:
AIR Mode is disabled
2014-02-05 12:59:00:357
776 fe0
AU # Policy Driven Provider: http://MyWSUS.MyDomain.local:8530
2014-02-05 12:59:00:357
776 fe0
AU # Detection frequency: 22
2014-02-05 12:59:00:357
776 fe0
AU # Target group: CSM Servers
2014-02-05 12:59:00:357
776 fe0
AU # Approval type: Pre-install notify (Policy)
2014-02-05 12:59:00:357
776 fe0
AU # Auto-install minor updates: No (User preference)
2014-02-05 12:59:00:357
776 fe0
AU # Will interact with non-admins (Non-admins are elevated (User preference))
I confirm that from the test server I can telnet to my wsus server on TCP port 8530

Hi,
This issue occurs if the URL under the Group Policy setting 'Specify intranet Microsoft update service location' is invalid.
You receive a "80072EE6" error code when you download an update from Windows Server Update Services in Windows 7-based or Windows Server 2008 R2-based
computer
http://support.microsoft.com/kb/2724184
Make sure that the URL is correct and the name can be resolved.
Hope this helps.

Wireless w/ ndiswrapper; fails to get ip from dhcp

I've got a DWL-G510 and I recently used ndiswrapper to install the win2k drivers. It confirms 'driver installed, hardware present', iwlist can scan and pick up my access point, put in the WEP key, and associate the access point successfully (It comes up with the MAC Address of the router). However, then I go the old
ifconfig wlan0 up
dhcpcd wlan0
and it fails to receive an IP; it just sits there for a few minutes, does nothing, and downs the interface in ifconfig. And yes, DHCP is set up, as ethernet connections work fine. The wireless also works in windows, so it's not with that either. Is there any step that I've missed? (Yes, I've read the ndiswrapper installation wiki page)

I boot:
[root@archbox tom]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:D8:A2:A2:C0
inet addr:10.0.0.38 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1144 (1.1 Kb) TX bytes:1626 (1.5 Kb)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
I modprobe ndiswrapper and scan the networks:
[root@archbox tom]# iwlist wlan0 scan
wlan0 Scan completed :
Cell 01 - Address: 00:15:E9:03:F7:10
ESSID:"homewlan"
Protocol:IEEE 802.11g
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality:0/100 Signal level:-44 dBm Noise level:-256 dBm
Encryption key:on
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
Extra:bcn_int=100
Extra:atim=0
I associate the access point:
[root@archbox tom]# iwconfig wlan0 key ########## essid homewlan
I check to make sure it's configured fine:
[root@archbox tom]# iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11g ESSID:"homewlan"
Mode:Managed Frequency:2.437 GHz Access Point: 00:15:E9:03:F7:10
Bit Rate=54 Mb/s Tx-Power:20 dBm Sensitivity=-121 dBm
RTS thr=2347 B Fragment thr=2346 B
Encryption key:####-####-## Security mode:restricted
Power Management:off
Link Quality:100/100 Signal level:-44 dBm Noise level:-256 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
eth0 no wireless extensions.
eth1 no wireless extensions.
sit0 no wireless extensions.
I bring it up:
[root@archbox tom]# ifconfig wlan0 up
[root@archbox tom]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:D8:A2:A2:C0
inet addr:10.0.0.38 Bcast:10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::211:d8ff:fea2:a2c0/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:325 errors:0 dropped:0 overruns:0 frame:0
TX packets:283 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:363403 (354.8 Kb) TX bytes:74604 (72.8 Kb)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:280 (280.0 b) TX bytes:280 (280.0 b)
wlan0 Link encap:Ethernet HWaddr 00:15:E9:32:48:E6
inet6 addr: fe80::215:e9ff:fe32:48e6/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:60 (60.0 b) TX bytes:2996 (2.9 Kb)
Interrupt:19 Memory:d0000000-d0008000
I dhcp it:
[root@archbox tom]# dhcpcd wlan0
ifconfig then returns to its initial state (ie. without wlan0 as active).

Sales order comes in 1 plant and get dispatch in other plant

Hi Guru's
we've a scenario where we've one company and 2 plants located in 2 diffrnt states, here we r working on MTO scenario, where lets say we hv 2 plants name 101 n 102.
sales order comes for FG in 101 plant it triggers the initial production n remaining production takes place in 102 and final FG get dispatch from 102 plant.
how to map this sales order whose receiving plant is 101 and delivering plant is 102 in SAP so i cud run MRP on this sales order in 102 plant so as to get dep req in 101 plant?
Kindly assist
Aman

Hello
You can refer following links for your reference:
- Make to Order for STO
- STO Link in MTO
- MTO and STO
Regards
JP

Problem to get Connection from JBoss AS

PLEASE HELP ME....
I GOT ERROR WHILE I TRYED TO GET A CONNECTION FROM JBOSS APP. SERVER.
THE CODE IS
package com.beo.atlas.common;
public final class ServiceLocator     {
     private static final String JBOSS_INITIAL_CONTEXT_FACTORY = "org.jnp.interfaces.NamingContextFactory";
     private static final String JBOSS_PROVIDER_URL = "localhost:8080";
     private static final String JBOSS_URL_PKG_PREFIXES = "org.jboss.naming:org.jnp.interfaces";
     public static final String ATLAS_DATASOURCE = "java://myatlasdbpool";
     private static java.util.Hashtable dataSourceCache = null;
     private static ServiceLocator locator = null;
     static     {
          System.out.println("Locator Initializing");
          dataSourceCache = new java.util.Hashtable();
          locator = new ServiceLocator();
     private ServiceLocator()     {     }
     public static ServiceLocator newInstance()     {
          System.out.println("Returning the Locator Object");
          return locator;
     public java.sql.Connection getDBConnection() throws java.sql.SQLException,javax.naming.NamingException     {
          System.out.println("Getting Data base Connection....");
          if(dataSourceCache.containsKey(ATLAS_DATASOURCE))     {
               System.out.println("Trying to get Connection from CACHE...");
               System.out.println("Returning Connection Object from cache.");
               return (java.sql.Connection)dataSourceCache.get(ATLAS_DATASOURCE);
          System.out.println("FAILED to get Connection from CACHE");
          System.out.println("Trying to create new Connection...");
          java.util.Properties props = new java.util.Properties();
          props.put(javax.naming.Context.INITIAL_CONTEXT_FACTORY,JBOSS_INITIAL_CONTEXT_FACTORY);
          props.put(javax.naming.Context.PROVIDER_URL,JBOSS_PROVIDER_URL);
          props.put(javax.naming.Context.URL_PKG_PREFIXES, JBOSS_URL_PKG_PREFIXES );
          javax.naming.InitialContext context = new javax.naming.InitialContext(props);
          Object o = context.lookup(ATLAS_DATASOURCE);
          System.out.println("Object Created...");
          javax.sql.DataSource dataSource = null;
          try     {
          dataSource = (javax.sql.DataSource)javax.rmi.PortableRemoteObject.narrow(o,javax.sql.DataSource.class);
          }catch(Exception e)     {
          java.sql.Connection con = dataSource.getConnection();
          dataSourceCache.put(ATLAS_DATASOURCE,con);
          System.out.println("Returning new Connection Object.");
          return con;
ERROR
Locator Initializing
Returning the Locator Object
Getting Data base Connection....
FAILED to get Connection from CACHE
Trying to create new Connection...
Object Created...
java.lang.ClassCastException
at com.sun.corba.se.impl.javax.rmi.PortableRemoteObject.narrow(Unknown S
ource)
at javax.rmi.PortableRemoteObject.narrow(Unknown Source)
at com.beo.atlas.common.ServiceLocator.getDBConnection(ServiceLocator.ja
va:56)
at AtlasClient.printData(AtlasClient.java:16)
at AtlasClient.main(AtlasClient.java:8)
Caused by: java.lang.ClassCastException: org.jnp.interfaces.NamingContext
... 5 more

I've got the same problem. Working with JBoss 4.0.3 and Tomcat 5.5. The lookup goes fine and returns an object of type remote home, however when I perform the narrow() I get ClassCastException. I'm sure the client and the server have got the same file version as I built from the same source.
[error]
Caused by: java.lang.ClassCastException
     at com.sun.corba.se.impl.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:229)
     at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:137)
[error]

Dispatcher yellow,J2EE status info unavailable,Could not get file from DB

Hello Experts,
I have successfully installed a ECC 6.0 server-ABAP +JAVA system (DB2 v9.5 FP4 windows server 2008-x64 bit).
Kernel: 700 , Patch: 185 ; SP level : rel 700 , level 17
I upgraded JSPM sucessfully from 14 to 17.Then i was trying to apply JAVA sp's one by one using single sp option JSPM tool.
I DEPLOYED the first sp component sucesfully but after that the next component gave warning in JSPM check that SDM is not started.
I checked MMC.Dispatcher was YELLOW and J2EE status info unavailable. Cannot use JCMON to start SDM..option 20 gives error--cannot access shared memory
I already tried Notes   784568 and 997510
Relevant logs:-
jvm_bootstrap.out
=================================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
Attempt to fully materialize lob data that is too large for the JVM.
Disable data source property "fullyMaterializeLobData" for locator-based lob implementation. ERRORCODE=-4499, SQLSTATE=null ERRORCODE=-4499, SQLSTATE=null
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Unable to synchronize native files for instance [ID140026]!
==============================================================================================
dev_jcontrol
=============================================================================================
Thr 4360] *** ERROR => JsfOpenShm: FtInit(SESSION, 2, 176) failed (got (rc = 0 operation successful), expected (rc = 8 already initialized)) [jsfxxshm.c   913]
[Thr 4360] *** ERROR => Can't create shared memory segment 69 (rc = 1) [jcntrxx.c    1749]
[Thr 4360] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    273]
[Thr 4360] JControlCloseProgram: started (exitcode = -1)
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
[Thr 4360] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
=================================================================================================
log_bootstrap_ID0140026.0
==========================================================================================
Error synchronizing file [.\..\os_libs\FontManagerService_native.zip].
com.sap.engine.frame.core.configuration.InvalidPersistentDataStreamException: Could not get file from DB.
============================================================================================
Eagerly looking forward to a solution from you experts..
Thanks,
Rakesh

Hi,
I am facing the same related problem with ECC 6.0.
My dispatcher started it is showing yellow- dialog queue standstill, J2EE status info unavailable
after some time dispatcher has stopped.
Please check my below trace file for dispatcher:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      03
sid        DEV
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    114
intno      20050900
make:      multithreaded, Unicode, optimized
pid        13108
Fri Nov 27 02:31:55 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 13108) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 114 successfully loaded
     shared lib "dw_xtc.dll" version 114 successfully loaded
     shared lib "dw_stl.dll" version 114 successfully loaded
     shared lib "dw_gui.dll" version 114 successfully loaded
     shared lib "dw_mdm.dll" version 114 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3903
Fri Nov 27 02:31:59 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdev_DEV_03                           <
DpShMCreate: sizeof(wp_adm)          15800     (1436)
DpShMCreate: sizeof(tm_adm)          4232256     (21056)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1536)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 08290040, size: 4889440)
DpShMCreate: allocated sys_adm at 08290040
DpShMCreate: allocated wp_adm at 08292090
DpShMCreate: allocated tm_adm_list at 08295E48
DpShMCreate: allocated tm_adm at 08295E78
DpShMCreate: allocated wp_ca_adm at 0869F2B8
DpShMCreate: allocated appc_ca_adm at 086A5078
DpShMCreate: allocated comm_adm at 086A6FB8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08727E78
DpShMCreate: allocated gw_adm at 08727EB8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 08727EE8
DpShMCreate: allocated wall_adm at 08727EF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Nov 27 02:32:00 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 13356
argv[0] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[1] = D:\usr\sap\DEV\DVEBMGS03\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2919
argv[5] = -DSAPSYSTEM=03
argv[6] = -DSAPSYSTEMNAME=DEV
argv[7] = -DSAPMYNAME=sapdev_DEV_03
argv[8] = -DSAPPROFILE=D:\usr\sap\DEV\SYS\profile\DEV_DVEBMGS03_sapdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
***LOG Q0K=> DpMsAttach, mscon ( sapdev.visu.com) [dpxxdisp.c   11753]
DpStartStopMsg: send start message (myname is >sapdev_DEV_03                           <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Nov 27 02:32:01 2009
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 114
Release check o.K.
Fri Nov 27 02:32:05 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1468
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2927) [nixxi.cpp    4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=13356)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Nov 27 02:32:40 2009
ERROR => W0 (pid 13364) died [dpxxdisp.c   14441]
ERROR => W1 (pid 13372) died [dpxxdisp.c   14441]
ERROR => W2 (pid 13380) died [dpxxdisp.c   14441]
ERROR => W3 (pid 13388) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 13396) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 13404) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 13412) died [dpxxdisp.c   14441]
ERROR => W7 (pid 13420) died [dpxxdisp.c   14441]
ERROR => W8 (pid 13428) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W9 (pid 13436) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W10 (pid 13444) died [dpxxdisp.c   14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:50 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Thu Nov 26 21:02:50 2009
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA    13364 Ended         no      1   0        0
1 DIA    13372 Ended         no      1   0        0
2 DIA    13380 Ended         no      1   0        0
3 DIA    13388 Ended         no      1   0        0
4 UPD    13396 Ended         no      1   0        0
5 ENQ    13404 Ended         no      1   0        0
6 BTC    13412 Ended         no      1   0        0
7 BTC    13420 Ended         no      1   0        0
8 BTC    13428 Ended         no      1   0        0
9 SPO    13436 Ended         no      1   0        0
10 UP2    13444 Ended         no      1   0        0
Dispatcher Queue Statistics               Thu Nov 26 21:02:50 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          12
wake_evt_udp_now     0
wake events           total     8, udp     7 ( 87%), shm     1 ( 12%)
since last update     total     8, udp     7 ( 87%), shm     1 ( 12%)
Dump of tm_adm structure:               Thu Nov 26 21:02:50 2009
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Thu Nov 26 21:02:50 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:55 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdev_DEV_03                           < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (13340) (SOFT_KILL)
Stop icman
killing process (13348) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:13340 HANDLE:1564)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:56 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:13340 HANDLE:1564)
wait for end of icman
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:57 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:58 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Nov 27 02:32:59 2009
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:13348 HANDLE:1568)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Please help me to start my SAP MMC.
Thanks

Server 2012 errors for timeout -- LDAP error number: 55 -- LDAP error string: Timeout Failed to get server error string from LDAP connection

Hello, currently getting below error msg's utilizing software thru which LDAP is queried for discovering AD objects/path and resource enumeration and tracking.
Have ensured firewalls and port (389 ) relational to LDAP are not closed, thus causing hanging.
I see there was a write up on Svr 2003 ( https://support.microsoft.com/en-us/kb/315071 ) not sure if this is applicable, of if the "Ntdsutil.exe" arcitecture has changed much from Svr 03. Please advise.
-----------error msg ----------------
-- LDAP error number: 55
-- LDAP error string: Timeout Failed to get server error string from LDAP connection

The link you shared is still applicable. You can adjust your LDAP policy depending on your software requirements.
I would also recommend that you in touch with your software vendor to get more details about the software requirements.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Error from sample JAX-WS security from documentation: Failed to get token

I am trying example 2-1 for the server and 2-3 for the client and i am using WLS 10.3.5:
http://docs.oracle.com/cd/E21764_01/web.1111/e13713/message.htm#CDEBIJEJ
i get some errors when trying to compile/generate the source listed, but i work around those.
and i hardcode some values ( like username/password, keystore locations, etc).
i can deploy the web service successfully and execute the client.
I have some debugging turned on, so i see that the messages are being successfully encrypted and decrypted.
However, i get an exception back from the server:
[java] Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
[java]      at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
[java]      at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
[java]      at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
[java]      at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
[java]      at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
[java]      at $Proxy30.echo(Unknown Source)
[java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java]      at java.lang.reflect.Method.invoke(Method.java:597)
[java]      at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
[java]      at $Proxy31.echo(Unknown Source)
[java]      at wssp12.wss10.Test.main(Unknown Source)
For the Service:
I have used exactly the same policies from the example.
i did have to comment out the @WLHTTPTransport clause ( the error gives me the impression it is no longer supported )
For the client:
The generated port no longer takes just string for the wsdl url, so i don't pass in a url at all. i let it use the URL from the client gen process. I also hard coded a username/password i created.
any thoughts?
These examples don't mention anything about Secure Token Server ( although, i see it mentioned later down the page after other examples ). Do these examples require an STS be configured? or is that unrelated to my exception?
Thanks for the help!!!
Follow up:
i added the following ( which i think should take care of the STS part i was asking about):
61 String sts="https://TESTUESR0:7002/UsernameTokenPlainX509SignAndEncrypt/simpleSecureService";
62 requestContext.put(weblogic.wsee.jaxrpc.WLStub.WST_STS_ENDPOINT_ON_WSSC,sts);
but this made no difference.
Edited by: user733322 on Feb 17, 2012 7:38 AM

DTC was running on remote computer. The problem was it was no longer accepting transactions from remote servers. This was in SSIS so I had to turn to "Transaction Supported" for all Data Flow Transactions.
Greg Hanson

WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

I have couple of VMs Server 2012 R2 RTM on Hyper-v Host running the same OS.
All machines including host and VM that is not in domain have an error in Windowsupdate.log:
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
FW and UAC are off on all. There are posts on web discussing the same error but most of them connect this to WSUS or Config Manager. And it is clear because we are touching Windowsupdate.log when troubleshooting WSUS. And because WSUS on 2012 is BUGGY this
error confuses too.
Finally, as mentioned earlier I deployed NEW server 2012 not from SYSPREP and did not place it to the domain. Updated the machine from MS update. Everything is OK beside the same error about COST :).
So now it is clear it has nothing to do with WSUS or Configuration manager. It indicates to some Network issue. But there is no clear answer. Some suggest just to ignore the error if everything is OK. But I would like to have a clean log. And it is just
interesting what could cause the problem. Is it Hyper-V stuff or Server 2012 itself. Anyway I guess I am doing right by posting a question on HV forum since here are people that should know 2012 .
Thanks.
see the log below
2013-12-16 20:32:03:610 752 b44 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-12-16 20:32:04:047 752 b44 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-12-16 20:32:04:047 752 b44 PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2013-12-16 20:32:04:047 752 b44 Agent Reading cached app categories using lifetime 604800 seconds
2013-12-16 20:32:04:047 752 b44 Agent Read 1 cached app categories
2013-12-16 20:32:05:016 752 b44 PT   + SyncUpdates round trips: 2
2013-12-16 20:32:06:422 752 b44 Agent   * Found 0 updates and 14 categories in search; evaluated appl. rules of 449 out of 701 deployed entities
2013-12-16 20:32:06:422 752 b44 Agent *********
2013-12-16 20:32:06:422 752 b44 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 2]
2013-12-16 20:32:06:422 752 b44 Agent *************
2013-12-16 20:32:06:422 752 b44 IdleTmr WU operation (CSearchCall::Init ID 2, operation # 20) stopped; does use network; is not at background priority
2013-12-16 20:32:06:422 752 b44 IdleTmr Decremented PDC RefCount for Network to 0
2013-12-16 20:32:06:422 752 b44 IdleTmr Decremented idle timer priority operation counter to 1
2013-12-16 20:32:06:422 752 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2013-12-16 20:32:06:422 752 ba0 AU   # 0 updates detected
2013-12-16 20:32:06:422 752 ba0 AU #########
2013-12-16 20:32:06:422 752 ba0 AU ## END ## AU: Search for updates [CallId = {5393115A-5840-4CB4-9C66-F68034E75DF8} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2013-12-16 20:32:06:422 752 ba0 AU #############
2013-12-16 20:32:06:422 752 ba0 AU All AU searches complete.
2013-12-16 20:32:06:422 752 ba0 AU AU setting next detection timeout to 2013-12-17 22:55:28
2013-12-16 20:32:06:422 752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2013-12-16 20:32:06:422 752 ba0 AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Hi pob579,
Sorry for the late .
I want to know if your network connection indicates " unidentified network ".
If that is the case , you can try the step below :
    open the "local group policy"
    expand local computer policy -->computer configuration -->windows settings -->security settings
--> network list manager policies
    in the right pane you will see Unidentified Networks , double click it , then you can configure the
Location Type when the network connection is unidentified
    If there is domain , you need to change the same entry in "Domain Policy"
    after that please restart your computer
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
Have you thought about turning auto syncing off?
Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

I am getting an error that says "failed attempts to get anything from cdr server" on a website. It just started and now it won't launch the information. How do I correct this?

This is occurring on the website Virgin Mobile. I was asked to perform some upgrades on my computer and now I am unable to get the content of my call history to display on a screen within this website. The 2nd window will display quickly and then shrink down before showing the call history content.
The error message then pops up saying "failed two attempts to get anything from cdr server"

Are you using the original gray-faced OS X DVDs that came with the system (if so, what OS X level does it say on the disk) or a retail copy of OS X 10.6 or another gray-faced OS X disk from another system? You can't use a gray-faced OS X disk from, for example, an iMac or MacBook Pro, to install on your MacBook.
Was it originally delivered with an OS X level that is greater than what you're trying to install? You can't install an earlier level than what came with the system.
Did you boot to the DVD, and use Disk Utility to create one disk partition, then reboot and try to install?

Failed to get dispatch from IBrwsr2! PHTML is null!

Similar Messages

Maybe you are looking for