Failed to get the linked token information
Greetings,
I have run command line that executes a vbscript that is giving the following error:
failed to get the linked token information. It may not be available. Error 1312
The script works perfectly and returns a code of zero. The script is running under another account but all that works fine too. I could just ignore that error but I'm curious as to why it is being generated.
Thanks
David Z
Error 1312:
C:\DeploymentShare\Scripts>err 1312
# for decimal 1312 / hex 0x520 :
ERROR_NO_SUCH_LOGON_SESSION winerror.h
# A specified logon session does not exist. It may already
# have been terminated.
Are you accessing any network resources that require credentials?
(I find it funny/suspicious when scripters claim upfront: "The script works perfectly..." :^)
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com
Similar Messages
-
I am running WHQL Certificating test on the Windows 8.1 host and during the run I am running into error like,
Cause : Failed to Start the Task
Cause : Failed to Get the user Token
Failure : Failed to Start the Task "Detour Logging"
Cause : Failed to Get User Token ""\"" For Task "Detour Logging"
Cause : Session Option Not Supported by the Operating System.
Cause : WinPE Does not Support this Session Option
Anybody has any thoughts on this?
Thanks in advance.I am running WHCK for my file system minifilter driver. I suffer the same thing with you. have you got any idea?
-
Failed to get the document information (LO 26315)
Hi,
I have to create an Xcelsius dashboard where I use a Live Office connection based on a WebI-report. The WebI is created on top of a BEx Query.
I need to pass 12 parameters to the WebI-report in orde to get the correct data.
Everything works fine in design-time, but when I want to preview the dashboard, I get the error: Failed to get the document information (LO 26315).
After investigating the issue, I've noticed that everything works fine when the parameters I have to pass, are only created in the WebI-report. But in my case it is a BEx variable that causes the error.
There is no possible way that I can recreate the BEx variable in the Universe (There are restricted key figures, calculated key figures and cell restrictions in the BEx query).
My question: is there a way to pass a parameter from an Xcelsius dashboard to a WebI-report via a Live Office connection to a BEx variable?
LievenFred,
on the SAP Notes Search page on sdn.sap.com, you can enter the note number in a text field at the right side of the page, just above the Search Option part.
Just enter Note 1357924 in that text field and press the blue icon with the arrows next to it. Thiw ill show the corresponding note.
Lieven -
Cannot access external data , Failed to get the document information.
Hi All,
In my dashboard there are live office connections which has optional prompts defined in SAP BI. I have bound the cells to these prompts in live office object properties.
There are no errors while refreshing the LO connections from excel sheet.
But when i run that dashboard and give BLANK value for that prompt then it throws the error :
Cannot access external data , Failed to get the document information. (LO 26315).
Reply highly appreciated.
Thanks & Regards,
DJHi Hardik,
I am building a similar solution as yours connecting webi reports to Bex queries and reading the webi data through live office into the dashboards. I am using almost similar versions as yours - BW 7.1 SP5, BO 4.1 SP4, Dashboards and Live Office SP4 versions. I am facing issues setting up the live office connections itself. I create the Live office connections within an excel and when I try to import this excel spreadsheet into my dashboard designer, it runs forever and crashes.
Could you please list out the steps you performed to get the Dashboard to preview live office data? Do you have OLAP connections for BW cubes and created WebI reports using these connections or You created a Universe on top of the Bex Queries?
It would be great if you could share the steps performed.
With respect to your issue, check if the report engine service is running. Do you have any error message details apart from this error?
Thanks.
Regards,
Rohini. -
One of our DPs has stopped loading content.
I've research for quite a bit and cannot find a clear cut reason to this. This server only has a DP role, I verified sharing permissions, all looked good. This DP has been running just fine for the last year or so and all sudden it will no longer load
packages. The disk drive is still present I can still reach the hidden share \\servername.com\E$
Verified that the SMSSIG$ folder is there and the last entry is from 4/23/2015
SCCM 2012 R2
OS 2008 R2 Standard
Any help is greatly appreciated!
Here's a snipit from the distmgr.log
Start updating the package on server ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\...
Attempting to add or update a package on a distribution point.
Will wait for 1 threads to end.
Thread Handle = 0000000000001E48
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=***.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:01.972 2015 ISTR0="SYSMGMT Source" ISTR1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
SMS_DISTRIBUTION_MANAGER 4/30/2015 2:12:01 PM
8252 (0x203C)
The current user context will be used for connecting to ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\.
Successfully made a network connection to \\*****.com\ADMIN$.
Ignoring drive \\*****.com\C$\. File \\*****.com\C$\NO_SMS_ON_DRIVE.SMS exists.
Unable to get the file system information for: \\*****.com\E$\; error = 64.
Failed to find a valid drive on the distribution point ["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\
Cannot find or create the signature share.
STATMSG: ID=2324 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=sccmprdpr1sec2.mmm.com SITE=1AB PID=2472 TID=8252 GMTDATE=Thu Apr 30 19:12:55.206 2015 ISTR0="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
ISTR1="CAS00087" ISTR2="" ISTR3="30" ISTR4="94" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="CAS00087" AID1=404 AVAL1="["Display=\\*****.com\"]MSWNET:["SMS_SITE=1AB"]\\*****.com\"
Error occurred. Performing error cleanup prior to returning.
Cancelling network connection to \\*****.com\ADMIN$.Error 64 is being returned which is simply "the network name is no longer available".
There can be a number of reasons for this from SMB compatibility issues (2003 servers wont support SMB2), to the expected and actual computer name of the boxes don't match (tries to authenticate with server.tld.com when the actual name is srv-01.tld.com and
you just put a C-name in). I'd start from the top: Try opening said share from the Primary Site server as that's the box doing the work. Verify the IP and computer name is legit and that no one has played ACL games between the two systems (remember
RPC only initiates/listens on port 135 but established connections are up in the dynamic port range).
At the end of the day it's an issues "underneath" SCCM, and not an SCCM problem specifically. -
How to get the link of already archived document
Dear all,
How to get the link of already archivied document. for example i have a sales order for which subsequent documents have been archived. now i want to get the link of subsequent document.
please give some solution
Thanks in advance
Thanks,
Hemachandran.Hemachandran,
The archiving object for sales order is SD_VBAK. If you run the program S3VBAKAU by transaction se38 and search based on the document numbers ( as you mentioned it is the preceeding document numbers to the current document), you will be able to retrieve the information regarding the previous sales orders.
More information on the sales order archiving object can be found at,
http://help.sap.com/saphelp_45b/helpdata/en/a9/55c7b690a111d1a5510000e82deaaa/content.htm
Sojan
<<text removed by moderator>>
Edited by: Matt on Nov 16, 2008 5:08 PM - Do not request points -
How to get the link report of a swf file to the set of clases
He But How to get the link Report of the SwF File
Here are some links with additional information:
http://stackoverflow.com/questions/185252/optimizing-flex-when-multiple-modules-are-used
http://livedocs.adobe.com/flex/3/html/help.html?content=modular_4.html
http://livedocs.adobe.com/flex/3/html/help.html?content=controls_15.html
http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_14.html
If this post answers your question or helps, please mark it as such. -
How to get the link between mara, ausp, cawn and cawnt tables
hello ABAPERS
i have got a requiremet in that i have to get the relation .
how to get the link between mara, ausp, cawn and cawnt tables and also type how can we get link between char value and char description in cawn and cawnt tables through ausp and mara tables.
I would be very thankful for ur help in advance.
Thanks & Regards.
soniHi,
Sample report using the linkage between tables;
report batch_char no standard page heading
line-size 132
line-count 58(1)
message-id mm.
Report by Batch Characteristic *
Description : Report by Batch Characteristic *
Declaration for Tables
tables: mara, " Material Master
mard, " Storage Location Data for Material
t001w, " Plants/Branches
t001l, " Storage Locations
cabn, " Characteristics
inob. " Link between Internal Number and Object
Declaration for Constants
constants : c_klart like ausp-klart value '023', " Class Type
c_obtab like inob-obtab value 'MCH1', " Database Table
c_flag type c value 'X', " Flag
c_c23 type i value '23', " Ratio
Constants for Ratio Categories
c_13 type p decimals 2 value '13.00', " For Ratio 13
c_1499 type p decimals 2 value '14.99', " For Ratio 14.99
c_15 type p decimals 2 value '15.00', " For Ratio 15
c_1699 type p decimals 2 value '16.99', " For Ratio 16.99
c_17 type p decimals 2 value '17.00', " For Ratio 17
c_1899 type p decimals 2 value '18.99', " For Ratio 18.99
c_19 type p decimals 2 value '19.00', " For Ratio 19
c_2099 type p decimals 2 value '20.99', " For Ratio 20.99
c_21 type p decimals 2 value '21.00', " For Ratio 21
c_2299 type p decimals 2 value '22.99', " For Ratio 22.99
c_23 type p decimals 2 value '23.00', " For Ratio 23
c_g23(4) type c value '>=23', " For Ratio >=23
c_ratio(5) value 'RATIO', " For Ratio
Constants for Storing Selected item field information
c_cursor1(15) value 'I_OUTPUT1-MEINS', " For Selected Base
" Unit of Measure
c_cursor2(15) value 'I_OUTPUT1-MATNR', " For Selected Base
" Material Number
c_cursor3(15) value 'I_OUTPUT1-MAKTX', " For Selected Base
" Material Des.
c_cursor4(15) value 'I_OUTPUT1-CLABS', "For Selected Base
" Stock Value
c_cursor5(15) value 'I_OUTPUT1-ATFLV', " For Selected Base
" Char.Value (Ratio)
c_cursor6(5) value 'C_G23'.
Declaration for Global Variables
data : g_exit type c, " Flag
g_clabs1(16) type c, " Quantity
g_clabs(18) type c, " Quantity
g_cursor(15) type c, " Cursor field name
g_matnr type mara-matnr, " Material Number
g_werks type mchb-werks, " Plant
g_atinn(30) type c. " Character.
Declaration for Internal tables
Internal table to hold Batch Stock data
data : begin of i_mchb occurs 0,
matnr like mchb-matnr, " Material Number
werks like mchb-werks, " Plant
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Unit of measure
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb.
Internal table to hold Secondary List data
data : begin of i_mchb1 occurs 0,
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
lgort like mchb-lgort, " Storage Location
charg like mchb-charg, " Batch Number
atinn like ausp-atinn, " Char.Value
clabs like mchb-clabs, " Stock Value
atflo like ausp-atflv, " Char.Value (Ratio)
atflv like ausp-atflv, " Char.Value (Ratio)
end of i_mchb1.
Internal table to get the Plant Name
data : begin of i_plant occurs 0,
werks like t001w-werks, " Plant
name1 like t001w-name1, " Name
end of i_plant.
Internal table to get the Material Description
data : begin of i_makt occurs 0,
matnr like makt-matnr, " Material
maktx like makt-maktx, " Description
end of i_makt.
Internal table to hold AUSP data
data : begin of i_ausp occurs 0,
objek like ausp-objek, " Object No
atinn like cabn-atinn, " Characteric value
atflv like ausp-atflv, " Characteristic Value
end of i_ausp.
Internal table to hold output data
data : begin of i_output occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv like ausp-atflv, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output.
Internal table to hold final Output data
data : begin of i_output1 occurs 0,
atinn like cabn-atinn, " Characteric value
werks like mchb-werks, " Plant
matnr like mchb-matnr, " Material Number
atnam like cabn-atnam, " Characteristic
atflv(32) type c, " Char.Value (Ratio)
name1 like t001w-name1, " Plant Description
maktx like makt-maktx, " Material Description
clabs like mchb-clabs, " Stock Value
meins like mara-meins, " Base Unit of Measure
end of i_output1.
Selection screen
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks for t001w-werks obligatory, " Plant
s_lgort for t001l-lgort, " Stor.Location
s_matnr for mara-matnr obligatory, " Material No
s_atinn for cabn-atinn. " Character.
selection-screen end of block b1.
At selection screen
at selection-screen.
Validation of Selection Screen Fields
perform validate_screen.
Start of selection
start-of-selection.
Get the Material and Batch Stock data from MARA and MCHB Tables
perform get_mat_stock_data.
Get the Material Group Text and Plant Name from T023T and T001W Tables
perform get_plant_grp_data.
Append the data into final Output Internal Table after getting the
Characteristic Values data from INOB and AUSP Tables
perform append_final_data.
Processing if the Characteristics contain 'RATIO'
perform collect_ratio.
End-of-Page
end-of-page.
write /1(125) sy-uline.
End of selection
end-of-selection.
if g_exit <> c_flag.
Display the Report Output data
perform display_report.
endif.
Top-of-Page
top-of-page.
Write the Report and Column Headings
perform get_headings.
at line-selection
at line-selection.
if sy-lsind = 1.
perform display_batch.
endif.
Top of page during line-selection
top-of-page during line-selection.
perform heading_seclist.
Form validate_screen
Validation of Selection Screen fields
form validate_screen.
Validation of Plant
clear t001w.
if not s_werks[] is initial.
select werks
into t001w-werks
from t001w
up to 1 rows
where werks in s_werks.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Plant'(002).
endif.
endif.
Validation of Material Number
clear mara.
if not s_matnr[] is initial.
select matnr
into mara-matnr
from mara
up to 1 rows
where matnr in s_matnr.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Material'(003).
endif.
endif.
Validation of Storage Location
clear t001l.
if not s_lgort[] is initial.
select lgort
into t001l-lgort
from t001l
up to 1 rows
where lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Storage Location'(004).
endif.
endif.
Validation of Characteristic Value
clear cabn.
if not s_atinn[] is initial.
select atinn
into cabn-atinn
from cabn
up to 1 rows
where atinn in s_atinn.
endselect.
if sy-subrc <> 0.
message e899 with 'Enter Valid Characteristic Value'(005).
endif.
endif.
Validation of Plant, Material and Storage Location
clear mard.
select matnr werks lgort
into (mard-matnr, mard-werks, mard-lgort)
from mard
up to 1 rows
where matnr in s_matnr and
werks in s_werks and
lgort in s_lgort.
endselect.
if sy-subrc <> 0.
message e899 with 'No Data found for the Selection Criteria'(006).
endif.
endform. "validate_screen
*& Form get_headings
Write the Report and Column Headings
form get_headings.
data: l_repid type sy-repid.
l_repid = sy-repid.
call function 'Y_STANDARD_HEADING'
exporting
repid = l_repid
heading1 = sy-title.
write:/1(125) sy-uline.
format color col_heading on.
write : /1 sy-vline, 2(18) 'Material Number'(008) centered,
20 sy-vline, 21(40) 'Material Description'(011) centered,
61 sy-vline, 62(22) 'Ratio'(009) centered,
84 sy-vline, 85(18) 'Quantity'(010) centered,
103 sy-vline, 104(20) 'Base Unit of Measure'(015) centered,
125 sy-vline.
write:/1(125) sy-uline.
format color off.
endform. "get_headings
*& Form get_mat_stock_data
Get the Material and Batch Stock data from MARA and MCHB Tables
form get_mat_stock_data.
clear: i_mchb,i_output, i_output1.
refresh: i_mchb,i_output, i_output1.
select a~matnr " Material Number
b~werks " Plant
b~lgort " Storage Location
b~charg " Batch Number
b~clabs " Stock Value
a~meins " Base Unit of Measure
into table i_mchb
from mara as a inner join mchb as b
on amatnr eq bmatnr
where b~matnr in s_matnr and
b~werks in s_werks and
b~lgort in s_lgort.
if sy-subrc <> 0.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
stop.
endif.
sort i_mchb by matnr werks lgort charg.
endform. " get_mat_stock_data
*& Form get_plant_grp_data
Get the Material Group Text and Plant Name from T023T and T001W
form get_plant_grp_data.
if not i_mchb[] is initial.
Get the Plant Description from t001w Table
clear i_plant.
refresh i_plant.
select werks " Plant
name1 " Name
into table i_plant
from t001w
for all entries in i_mchb
where werks = i_mchb-werks.
Get the Material Description from MAKT Table
clear i_makt.
refresh i_makt.
select matnr " Material number
maktx " Material Description
into table i_makt
from makt
for all entries in i_mchb
where matnr = i_mchb-matnr and
spras = sy-langu.
sort i_plant by werks.
delete adjacent duplicates from i_plant comparing werks.
sort i_makt by matnr.
delete adjacent duplicates from i_makt comparing matnr.
endif.
endform. "form get_plant_grp_data.
*& Form append_final_data
Append the data into final Internal Table
form append_final_data.
data : l_matbatch(28),
l_tabix like sy-tabix.
if not i_mchb[] is initial.
loop at i_mchb.
l_tabix = sy-tabix.
clear l_matbatch.
concatenate i_mchb-matnr i_mchb-charg into l_matbatch.
move-corresponding i_mchb to i_output.
Get the Plant Description from i_plant Table
read table i_plant with key werks = i_mchb-werks binary search.
if sy-subrc = 0.
i_output-name1 = i_plant-name1.
endif.
Get the Material Description from i_makt Table
read table i_makt with key matnr = i_mchb-matnr binary search.
if sy-subrc = 0.
i_output-maktx = i_makt-maktx.
endif.
Get the Characteristic Values data from INOB and AUSP Tables
clear inob.
select single cuobj from inob
into inob-cuobj
where klart = c_klart and
obtab = c_obtab and
objek = l_matbatch.
if sy-subrc = 0.
select objek
atinn
atflv
from ausp
into table i_ausp
where objek = inob-cuobj and
atinn in s_atinn and
klart = c_klart.
sort i_ausp by objek atinn.
loop at i_ausp.
clear cabn.
select single atinn atnam from cabn
into (cabn-atinn,cabn-atnam)
where atinn = i_ausp-atinn.
if sy-subrc = 0.
If the ratio value is between 13-14.99, display 13
if cabn-atnam cs c_ratio.
if i_ausp-atflv between c_13 and c_1499.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_ausp-atflv between c_15 and c_1699.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_ausp-atflv between c_17 and c_1899.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_ausp-atflv between c_19 and c_2099.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_ausp-atflv between c_21 and c_2299.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_ausp-atflv >= c_23.
i_mchb-atflo = i_ausp-atflv.
i_mchb-atflv = c_23.
endif. " Condition for RATIO values
else. " If characteristic does contain RATIO
i_mchb-atflv = i_ausp-atflv.
endif.
i_output-atinn = cabn-atinn.
i_output-atnam = cabn-atnam.
i_output-atflv = i_ausp-atflv.
i_mchb1-matnr = i_mchb-matnr.
i_mchb1-werks = i_mchb-werks.
i_mchb1-lgort = i_mchb-lgort.
i_mchb1-charg = i_mchb-charg.
i_mchb1-clabs = i_mchb-clabs.
i_mchb1-atinn = i_ausp-atinn.
i_mchb1-atflo = i_mchb-atflv.
i_mchb1-atflv = i_ausp-atflv.
append : i_output, i_mchb1.
clear i_mchb1.
modify i_mchb index l_tabix transporting atflo atflv .
endif.
endloop.
endif.
endloop.
endif.
Checking whether the table is filled or not
if not i_output[] is initial.
sort i_output by atinn werks matnr atflv.
else.
g_exit = c_flag.
message s899 with 'No Data found for the Selection Criteria'(006).
endif.
Delete the records where RATIO is less than 13.
delete i_output where atnam cs c_ratio and atflv lt c_13.
endform. "append_final_data
*& Form display_report
Display the Report Output data
form display_report.
data: l_tabix like sy-tabix.
loop at i_output1.
l_tabix = sy-tabix.
At new Characteristic
at new atinn.
read table i_output1 index l_tabix.
format color 1 intensified on.
write: /1 sy-vline, 2(20) 'Characteristic Name:'(007),
23(40) i_output1-atnam,
125 sy-vline.
format color off.
format color 4 intensified on.
write: /1 sy-vline, 2(20) 'Plant Name :'(022),
23(4) i_output1-werks, 29(30) i_output1-name1,
125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
clear: g_clabs, g_clabs1.
format color col_normal.
write :/1 sy-vline, 2(18) i_output1-matnr,
20 sy-vline, 21(40) i_output1-maktx,
61 sy-vline.
if i_output1-atflv = c_c23.
write: 62(22) c_g23 centered.
else.
shift i_output1-atflv left deleting leading space.
write: 62(22) i_output1-atflv centered.
endif.
write: 84 sy-vline,
103 sy-vline,
110(5) i_output1-meins.
If the quantity value is negative
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
hide : i_output1.
new-line.
At end of material
at end of matnr.
sum.
move : i_output1-matnr to g_matnr.
format color 3 intensified on.
write /1(125) sy-uline.
write :/1 sy-vline, 2(25) 'Total for Material :'(012),
28(18) g_matnr.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
write: 125 sy-vline.
format color off.
write /1(125) sy-uline.
endat.
At end of plant
at end of werks.
sum.
move : i_output1-werks to g_werks.
format color 3 intensified off.
write :/1 sy-vline, 2(25) 'Total for Plant :'(013),
28(4) g_werks.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
At end of characteristic
at end of atinn.
read table i_output1 index l_tabix.
sum.
format color 3 intensified on.
write :/1 sy-vline, 2(25) 'Total for Characteristic:'(014),
28(25) i_output1-atnam.
if i_output1-clabs ge 0.
write: 85(18) i_output1-clabs unit i_mchb-meins,
125 sy-vline.
else.
i_output1-clabs = - i_output1-clabs.
write i_output1-clabs unit i_mchb-meins to g_clabs1.
condense g_clabs1.
concatenate '(' g_clabs1 ')' into g_clabs separated by space.
write: 85(18) g_clabs right-justified,
125 sy-vline.
endif.
format color off.
write /1(125) sy-uline.
endat.
endloop.
endform. " display_report
*& Form DISPLAY_BATCH
Display the batch details for the seclected material *
form display_batch.
Get the batch details for the selected material
get cursor field g_cursor.
if g_cursor = c_cursor1 or
g_cursor = c_cursor2 or
g_cursor = c_cursor3 or
g_cursor = c_cursor4 or
g_cursor = c_cursor5 or
g_cursor = c_cursor6.
format color 3.
write: /1 sy-vline,
2(17) 'Material Number :'(020),
20(17) i_output1-matnr,
94 sy-vline.
format color off.
write /1(94) sy-uline.
loop at i_mchb1 where matnr = i_output1-matnr and
atinn = i_output1-atinn and
atflo = i_output1-atflv.
format color col_normal.
shift i_mchb1-charg left deleting leading '0'.
write :/1 sy-vline, 2(16) i_mchb1-lgort centered,
18 sy-vline, 19(17) i_mchb1-charg centered,
36 sy-vline.
if i_output1-atnam cs c_ratio.
write: 37(29) i_mchb1-atflv
exponent 0 decimals 2 centered.
else.
write : 37(29) i_mchb1-atflv
exponent 0 decimals 0 centered.
endif.
write : 66 sy-vline, 67(27) i_mchb1-clabs unit i_mchb-meins,
94 sy-vline.
format color off.
endloop.
write /1(94) sy-uline.
else.
message s899 with 'Invalid cursor position'(016).
exit.
endif.
endform. " DISPLAY_BATCH
*& Form HEADING_SECLIST
Write the Column Headings for Interactive Report
form heading_seclist.
write /1(94) sy-uline.
format color col_heading on.
write :/1 sy-vline, 2(16) 'Storage Location'(021),
18 sy-vline, 19(17) 'Batch Number'(017) centered,
36 sy-vline, 37(29) 'Characteristic Value'(018) centered,
66 sy-vline, 67(27) 'Quantity'(019) centered,
94 sy-vline.
write /1(94) sy-uline.
format color off.
endform. " HEADING_SECLIST
*& Form COLLECT_RATIO
Display the Characteristic ratio data
form collect_ratio.
loop at i_output.
clear g_atinn.
i_output1-atinn = i_output-atinn.
i_output1-atnam = i_output-atnam .
i_output1-werks = i_output-werks.
i_output1-name1 = i_output-name1.
i_output1-matnr = i_output-matnr.
i_output1-maktx = i_output-maktx.
i_output1-clabs = i_output-clabs.
i_output1-meins = i_output-meins.
call function 'CONVERSION_EXIT_ATINN_OUTPUT'
exporting
input = i_output-atinn
importing
output = g_atinn.
if g_atinn cs c_ratio.
If the ratio value is between 13-14.99, display 13
if i_output-atflv between c_13 and c_1499.
i_output1-atflv = c_13.
If the ratio value is between 15-16.99, display 15
elseif i_output-atflv between c_15 and c_1699.
i_output1-atflv = c_15.
If the ratio value is between 17-18.99, display 17
elseif i_output-atflv between c_17 and c_1899.
i_output1-atflv = c_17.
If the ratio value is between 19-20.99, display 19
elseif i_output-atflv between c_19 and c_2099.
i_output1-atflv = c_19.
If the ratio value is between 21-22.99, display 21
elseif i_output-atflv between c_21 and c_2299.
i_output1-atflv = c_21.
If the ratio value is greater than or equal to 23, display 23
elseif i_output-atflv >= c_23.
i_output1-atflv = c_23.
endif.
write i_output1-atflv to i_output1-atflv .
else.
write i_output-atflv to i_output1-atflv exponent 0 decimals 0.
endif.
collect i_output1.
clear i_output1.
endloop.
sort i_output1 by atinn werks matnr atflv.
endform. " COLLECT_RATIO
Reward if useful..
Regards,
Anji -
Hi All,
I want to know how to get the health , performance information and about the services run on devices that have connected to the system center to my c# application. Also I need to know about the information of databases that have connected to system center.
I will appreciate your feedback
Thank youHi,
You can configure service monitor for the required service on the server
refer below link for how to configure service monitoring
http://www.bictt.com/blogs/bictt.php/2011/03/17/scom-monitoring-a-service-part3
You can use SCOM SDK to connect to the scom server using c# and get required information
http://msdn.microsoft.com/en-us/library/hh329086.aspx
you can find the database in below registry path on management server
HKLM:\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Setup\DatabaseName
Regards
sridhar v -
can someone help me to get the link where to download adobe acrobat pro XI english/arabic version?
for english:
if you follow all 7 steps you can dl a trial here: http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html
and activate with your serial.
if you have a problem dl'g, you didn't follow all 7 steps. the most common error involves failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). -
How to get the device token in windows phone 8 sliverlight application?
Hi,
I am developing a windows phone 8 silverlight application . For my application I want to add push notification service , for this service I have to call one web service in my app . This api requires device token , device id ..etc , I am able to get the all
the things except devicetoken .
How to get the device token of a device ?
any help?
Thanks...
Suresh.MMost probably device token is the push channel url which is returned by MPNS when a request is made to it.
Step 3 here: Push notifications for Windows Phone 8
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8 -
BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups
Dear all
In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message:
" Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
Anyone has encountered similar issue?
BO version: BO XI 3.1 SP5
Authenticate: Windows AD
Thanks and RegardsPlease get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
http://service.sap.com/sap/support/notes/1323391
http://service.sap.com/sap/support/notes/1199995
-Ambarish- -
How can I get the link not to override my style sheet formatting?
I have an html page with text that has a style sheet applied
to it. When I insert a link into parts of the formatted text, the
style sheet formatting is lost in the linked text (the text for
mylars, shapes and number shapes becomes smaller: see code below).
How can I get the link not to override my style sheet
formatting?
Here is the html code I am referring to:
<span class="bodyheader20pt">Fall into winter's biggest
celebration with our New Year's Day <a href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&sc=184&PageNumbe r=1"
style="text-decoration:none">mylars</a>, <a href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=184&PageNumbe r=1"
style="text-decoration:none">shapes</a>, and 2-0-0-9 <a
href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=166&PageNumbe r=1"
style="text-decoration:none">number
shapes</a>.</span>
I am using Dreaweaver CS3 on a Mac running OSX
10.4.11.Show us this rule --> bodyheader20pt?
Also, having this in your three anchor tags -
style="text-decoration:none" -
will prevent your anchors from displaying any stylesheet
style for
text-decoration.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ellfwar" <[email protected]> wrote in
message
news:geqiph$foq$[email protected]..
>I have an html page with text that has a style sheet
applied to it. When I
> insert a link into parts of the formatted text, the
style sheet formatting
> is
> lost in the linked text (the text for mylars, shapes and
number shapes
> becomes
> smaller: see code below).
>
> How can I get the link not to override my style sheet
formatting?
>
> Here is the html code I am referring to:
> <span class="bodyheader20pt">Fall into winter's
biggest celebration with
> our
> New Year's Day <a
> href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&
> sc=184&PageNumber=1"
style="text-decoration:none">mylars</a>, <a
> href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
> sc=184&PageNumber=1"
style="text-decoration:none">shapes</a>, and 2-0-0-9
> <a
> href="
http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
> sc=166&PageNumber=1"
style="text-decoration:none">number
> shapes</a>.</span>
>
> I am using Dreaweaver CS3 on a Mac running OSX 10.4.11.
> -
when I'm checking my emails and click on a link that was sent to me in the email, how do I get the link to open?
Identify and remove adware
http://www.thesafemac.com/arg/
or use Adware Removal Tool.
http://www.thesafemac.com/art/ -
How to get the link of the WDA application dynamically
Hi,
I have created one web dynpro application. when it is saved the approver get a work item in his inbox.The work item should have the link to the web dynpro application.So that when the user clicks the link,He should able to view the web dynpro screen.
My question is how to get the link of the web dynpro application dynamicaly . I want to know whether it is stored in any DB tables or is there any function modules to call the web dynpro application ?
Regards,
Charumathi.BHi,
use
cl_wd_utilities=>construct_wd_url(
EXPORTING application_name = <name_of_your_application>
IMPORTING out_absolute_url = lv_url.
Best Regards,
Anika
Maybe you are looking for
-
How do I find whatever a "J2SE Installation" is?
The raptor script (on Fedora Core 4 Linux) asks me to "Type the full pathname of a J2SE installation". I have searched for anything beginning with J2SE or j2se and come up empty. I have also installed the Sun JDK and provided the path to tht installa
-
How do I crop an image in photoshop and place it in an illustrator file without having a white backg
How do I crop and image in photoshop and place it in an illustrator file without having a white background ?
-
My father uses iphoto 6 on a duo core 2, 17" imac. OS 10.6.x, maxed out with ram, 28,900 photos HP photo printer. Lately when printing to his photo printer the iamges are reduced to the top left corner. I have repaired permisions, reinstalled print d
-
Acs 4.2.1.15 and ssh authentication with ios xr
Hello, we have a new acs appliance (1113) with version 4.2.1.15 and we want to authenticate user through ssh from routers with ios xr software. unfortunately this doesn't work. Here ist our configuration of the router: line template VTY access-class
-
FM/BAPI for assigning a class and value instead of manualy doing in IE02
hi guys, i need a FM/BAPI which will allow me to take input as equipment number and assign the class and value for it as done manually in IE02. Input should be equipment number. POINTS will be given.