Failed to get WIF path after update?

After I applied the July PRU, none of my machines show up with a "later" scan date on the ZAM server.
So far, every workstation I've checked shows "failed to get WIF path" in the colw32.log file.
The registry key for Tally Systems has a blank setting for WIFName
Things were working before that just fine.

Very odd. Seems Novell hasn't fixed the bug where you apply a PRU and things don't restart properly.
Even though I restarted the manager and the inventory service, and it supposedly merged things fine, things were not fine.
I had to restart the entire server and then it started working again.
I'll have to dig up my old SR # and re-open the defect.
Sigh.

Similar Messages

Failed to get WIF path

I have Zen 7 Asset Inventory (7.00.0050 SP1 Interim Release 14) installed
on a W2K3 standard SP2 server.
I was getting inventory from my test clients until a couple of weeks ago.
I discovered this because I rolled out the lights out install of the
client to the rest of my workstations (about 450) last night and none of
them showed up in the web console.
Now on my clients (old and new), with Diagnostics on, I get "failed to get
WIF path" in the colw32.log on all my clients. This is the only error
that I can find anywhere.
I have verified that the inventory
service is running.
I have captured packets on both client and server and
verified that there is traffic to and from 7460 and 7461 as expected.
My catalog.ini file on the clients is empty and there is not a current
..wif file in the InboxCC folder.
What am I doing wrong?

Not really. :-)
On Fri, 25 Jan 2008 19:46:01 +0000, TDH wrote:
>
> You'd be amazed at just how often that happens... 8)
>
> -- Tim --
>
> tagross;1454053 Wrote:
>> I've figured this out and I want to share it so that if anyone does the
>> same dumb thing I did they know how to fix it.
>>
>> When I created the NAL installation app I didn't make sure the the
>> registry keys:
>> \HKEY_LOCAL_MACHINE\SOFTWARE\Tally Systems
>> Corp.\TSCensus\CollectionClient\WorkstationOID & WifName
>>
>> were not populated with the wrong info. The agents were trying to
>> connect
>> to the server with a duplicate Workstation OID and everything was wrong
>> so
>> it kept overwriting 1 single entry on the server.
>>
>> I created a new app that deleted those reg entries and Voila', my
>> workstations began showing up in my inventory. I also created a .mst
>> and
>> updated my original install app to not populate those fields.
>>
>> On Thu, 24 Jan 2008 18:10:19 +0000, Tim Gross wrote:
>>
>> > I built a generic clean XP machine and installed the client from the
>> CD
>> > and it initially got the same error. However, after a couple of
>> minutes I
>> > noticed that it built a .wif file and registered with the server so
>> > apparently there is a problem with our policies.
>> >
>> > Which policies specifically do I need to check?
>> >
>> > On Thu, 24 Jan 2008 16:20:39 +0000, TDH wrote:
>> >
>> >> Tim, that message indicates that the Collector has found the
>> registry key
>> >> from which it expects to get the name of the WIF (inventory) file
>> it's
>> >> expected to write, but the registry key is empty at collection time.
>> Do
>> >> you have a corporate policy in place that inhibits writing to the
>> >> workstations' registries? Are the ZAM Clients running as a service
>> with
>> >> administrative credentials?
>> >>
>> >> The ZAM Client and Collector need full access privileges to the ZAM
>> >> portion of the Program Files directory as well as to their own
>> portion of
>> >> the registry at HKEY_LOCAL_MACHINESOFTWARETally Systems
>> >> Corp.TSCensusCollectionClient.
>> >>
>> >> -- Tim --

ZAM collector failed to get WIF path message

This irritating message constantly appears in C:\Program Files\Novell\ZENworks\Asset Management\bin\colw32.log on many PC's. On some PC's it appears every time the collector service tries to start but on some it only appears infrequently. I need to know how to troubleshoot this message as many of our workstations are not producing an inventory and it's down to this message.
I have done some tests today on several PC's all logged on as me. Some work, some don't, so it can't be anything to do with policies and rights to the registry. Using ZAM 7.5 IR16 with latest product updates.
Thanks
Lenny

Originally Posted by lennyd
I should have added, a previous post suggested adding the line
Diagnostic=1
into cps.ini which i have done.
Diag.Exe and DoRes.DLL already exist in the client directory. This has created and populated a file called CClientEvent20081201.log in the client logs directory. However it contains no useful information at all as to why this "Failed to get WIF path" message appears.
On the particular PC I am using here, there are 2 .WIF files dated 27th November in the InboxCC directory then nothing since so it did work until last week so why it has stopped working now I have no idea.
Lenny
I had the same problem. It turns out the Windows firewall was blocking port 7461. Once port 7461 was opened everything started to work.
Jim

Sync session failed to start in iTunes after updated to iOS 7

Sync session failed to start in iTunes after updated to iOS 7

Restart your computer
While your computer is restarting, clear all of the applications from the background on your iPhone. You can do this by pushing the home button twice and swiping the programs off the screen by pushing them upwards.
After you are done doing that, restart your phone.
Wait about 10 seconds or so and turn your phone back on. By the time you get your phone back on your computer should be completly restarted and ready to go.
When your phone is back on, plug it into your computer. This should automatically bring up your Itunes, you may get another pop up that says autoplay, you can close that out. That's it. I hope it helps and good luck

WIFI problem after update 2.2

Like many users in this forum I also have problems with the wifi connection after updating to 2.2.
I have the first gen iphone, ever functioned without major problems, but after update 2.2. I found out that my iphone looses the wifi connection after some minutes of being turned off and turned on again. Sometimes the wifi is established but most of the times I have to go to the settings and there try to connect to wifi again and again.
Sometimes I get wifi connection after 2 attempts, most of the times it takes up to 8 tries to have wifi again. I restored my phone three times now, hoping this problem would be solved, but in vain.
I also called the Apple support-first I was told to delete the 2.2. software from my itunes folder and then to restore again and let itunes download 2.2 software again - no improvement! At my next call with the Apple-Iphone support, the agent told me that I should delete my router settings, restore the iphone software- no new strategy at all - and that the problem with the wifi after 2.2. is not a well known issue by Apple; I told the agent to google this topic to see that this is a very common problem concerning hundreds of even thousands of users after the update 2.2. At the end of the call I was offered to send the iphone for a repair, which in my opinion is the common solution for support centers if the don´t have any solutions left. I refused to send my iphone to a "useless" repair, because it´s so obvious that the problem is the 2.2. update! I encourage all of you to call the support-hotline and make pressure to get Apple to release a quick update to fix this annoying problem! Happy New Year to all of you!

Thanks for your advice; I´ve resetted the networks setting twice; a little improvement came with this (the wifi-connection now sometimes establishes faster); but still..after having turned on my phone after some minutes paused there´s only "edge" activated. Seems I´ll have to wait for update 2.3 ?

Failed to get root path for 'UED'

Good afternoon.
I have a problem with my IDES installation in University.
After a server reboot, MAXDB doesn't want to give up.
This is the log:
$ tail startdb.log
Error! Connection failed to node dolphin for database UED: database not found
Opening Database...
Failed to get root path for 'UED'
Error! Connection failed to node dolphin for database UED: database not found
Fri Aug 24 17:11:11 CEST 2007
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
If I try to run dbmcli manually, I receive the same error:
$dbmcli -u control,****** -d UED
Failed to get root path for 'UED'
Error! Connection failed to node (local) for database UED: database not found
Any suggestions??
Regards,
Luca

Hi Markus,
I think that my problem is not completely solved.
In fact, now the IDES system is on , but I'm not able to login into it.
When I select UED system on menu of my JAVA GUI and press "connect button", I can't access to SAP login window. (see )
I'm sure that is not a "network problem" of my laptop. (the problem persist also with others SAPGUI).
I've tried to <b>reboot</b> the server, but the situation is always the same. No way to access into the system, popup "connecting" reman.
If I try to see process that are running in the server, via "top -u uedadm" command, this is the situation:
3791 uedadm    16   0 87988 9768 1996 S    0 0.2   0:00.00 sapstartsrv
4775 uedadm    15   0 54664 1580 904 S    0 0.0   0:00.04 csh
4911 uedadm    16   0 54664 1604 920 S    0 0.0   0:00.05 csh
5388 uedadm    20   0 26788 1896 1064 S    0 0.0   0:00.04 sapstart
5408 uedadm    16   0 35736 5748 3024 S    0 0.1   0:00.06 ms.sapUED_DVEBM
5409 uedadm    16   0 4480m 100m 86m S    0 2.5   0:00.95 UED_00_DP
5410 uedadm    16   0 27528 2988 2224 S    0 0.1   0:00.05 co.sapUED_DVEBM
5411 uedadm    16   0 27488 2952 2216 S    0 0.1   0:00.04 se.sapUED_DVEBM
5412 uedadm    18   0 17620 2432 1800 S    0 0.1   0:00.01 ig.sapUED_DVEBM
5413 uedadm    16   0 210m 12m 3352 S    0 0.3   0:00.20 igsmux_mt
5414 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.16 igspw_mt
5415 uedadm    16   0 183m 18m 10m S    0 0.5   0:00.19 igspw_mt
5430 uedadm    15   0 188m 8296 5972 S    0 0.2   0:00.05 gwrd
5431 uedadm    18   0 164m 4376 2844 S    0 0.1   0:00.63 icman
5432 uedadm    17   0 4486m 22m 7988 S    0 0.6   0:00.01 UED_00_DIA_W0
5433 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W1
5434 uedadm    16   0 5201m 79m 63m S    0 2.0   0:00.82 UED_00_DIA_W2
5435 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W3
5436 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W4
5437 uedadm    16   0 4486m 22m 7980 S    0 0.6   0:00.02 UED_00_DIA_W5
5438 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_DIA_W6
5439 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W7
5440 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_DIA_W8
5441 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W9
5442 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_DIA_W10
5443 uedadm    17   0 4486m 22m 7984 S    0 0.6   0:00.01 UED_00_DIA_W11
5444 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.02 UED_00_UPD_W12
5445 uedadm    17   0 4486m 22m 7972 S    0 0.6   0:00.01 UED_00_UPD_W13
5446 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_UPD_W14
5447 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_ENQ_W15
5448 uedadm    16   0 4486m 22m 7976 S    0 0.6   0:00.02 UED_00_BTC_W16
5449 uedadm    17   0 4486m 22m 7980 S    0 0.6   0:00.01 UED_00_BTC_W17
5450 uedadm    17   0 4486m 22m 7976 S    0 0.6   0:00.01 UED_00_BTC_W18
I think that is not a performance problem of server, because
"free -m" command
                   total       used       free     shared    buffers     cached
Mem:          3946       2249       1697          0         50        950
-/+ buffers/cache:       1247       2699
Swap:         8001          0          8001
Can you please me, give some suggestions?
Thank you very much.

LEAP WIFI problem after updated to 4.2.2

I've just upgraded my tablet to 4.2.2.
Now I can't connect to my company's network which uses password LEAP. Major problem for me.
Seems this is a common problem across a number of Android platforms.
Does anyone know how to resolve on the Tab Z (not rooted). ?

We are looking into this (see http://talk.sonymobile.com/t5/Xperia-Z-ZL-ZR/XPERIA-Z-LEAP-WIFI-problem-after-updated-to-4-2-2/m-p/3...) but at the moment i have no solution. This seems to be a general problem with Android 4.2.2 from what i've been able to find.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My iPad 2 gets hanged often after updating my iOS from iOS 7 to iOS 8

my iPad 2 gets hanged often after updating my iOS from iOS 7.1.2 to iOS 8,what should I do?

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
You may leave comments at Apple Feedback.

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

VFS error - Failed to get short path - 0xFD01925-0x5

Hi all,
I'm stuck and frustrated, but I'm a little out of my depth and in a complex environment. I've been experimenting with sequencing Visio 2010 on App-V 5, and it just isn't working for me.
My first attempt just threw lots of errors on the client which I can't recall or explain, but thinking I had a licensing issue I re-sequenced it with a different KMS Key to be Pro, rather than Premium. (Sorry about the useless back story...)
Now I've sequenced it, activated, and verified the correct KMS key is installed and the correct version appears to be activated. Excellent, feeling confident.
I've then imported the App-V package into SCCM 2012 and deployed it to a collection I am in. I then request and approve the application and install it.
The error: When I try to start it from the start menu, I get a simple failure message telling me helpfully that there's a failure that's probably network related. "More Details" gives me my error codes which agree with the event log.
In the event log under the VFS Subsystem log (which I turned on to troubleshoot this, thanks to
Tim Mangan and his 'Toolbelt') I get two messages;
1. ID 606: Failed to get short path from '\\?\UNC\{DFS path to my Home drive}\Application Data'
2. ID 601: Failed to load runtime configurations. Error code 0xFD01925-0x5
So I've got that it's a VFS error, and that it likely translates somewhere to 'Access is Denied'.
I have edited the package to allow it all three options on the last tab for interacting with the file system.
I have verified that my account has full control on that path both by share and NTFS.
From my reading on GetShortPathName I feel I should mention that this path is a DFS share on a 2003 server (yes yes yes, we're migrating that soon too). The {DFS path to my Home drive} is mapped as a drive letter, is there any way I can point it to that?
The workstation is Windows 7 Enterprise x64 with an i7 and lots of RAM. The SCCM server is 2012 R2, the package was sequenced on a Windows 7 VM that was created with the same image as the workstations (minus network and with the app-v sequencer not client).
Visio is 32bit to interact with Office 32bit which has 32bit plugins from external vendors.
We do use Roaming profiles and Folder Redirection in a domain environment.
Help, please?

Interesting that the issue occurs with and without AppData redirection.
With a manual import of the package, I meant via PowerShell directly on a client:
http://stealthpuppy.com/app-v-5-powershell-one-liners-adding-and-publishing-app-v-client-packages/
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

Ask your question in an iPAD forum.
This is the OS X Mountain Lion forum.

Error: Failed to get a response after sending the message

This is another one of those errors I only get some of the time with a specific script. I can't figure a rhyme or reason for it. The full error is:
Failed to get a response after sending the message: <Message name="PageComplete"><Parameter WindowIndex="0"></Parameter><Parameter PassIfPageAlreadyComplete="false"></Parameter></Message>.
It's triggering at a WaitForPage() method in the script. The script is executing from the OTM server which is Windows Server 2008 R2 and only runs for OTM. No roles or features (other than SMTP). IE-ESC is off for all users. The script runs with -delayPercentage 1.
The script runs fine from within OpenScript workbench every time. The script does work when executed from OTM, however it will sometimes fail. When I run the scripts back to back the failure rate is about 50%. Same error every time....
Any help, insight, and ideas would be greatly appreciated.
Edited by: Colyn1337 on Mar 14, 2013 11:20 AM

Also, some time it throw slightly different error like:
"/web:window[@index='0']/web:document[@index='2']/web:form[@index='1']/web:inp
ut_text[@id='saw_*' or @index='1']" failed to respond to action: <Message
name="Click"><Parameter WindowIndex="0"></Parameter><Parameter
DocumentIndex="2"></Parameter><Parameter index="1"></Parameter><Parameter
tag="INPUT"></Parameter><Parameter type="text"></Parameter></Message>.
Please help to triage.

ITunes MATCH fails to load on iPhone4 after updating to IOS 6

iTunes MATCH is failing to fully load (display) on 1 of my 2 iPhone4 telephones after updating both to IOS 6. (My wife and I share the iTunes MATCH library using the same ID).
I have tried Signing Out and back In to iTunes, plus I have tried turning iTunes MATCH On & Off for this one iPhone 4 device, but the iTunes MATCH still fails to load.
The furtherest it ever gets is to display my previous Playlists and my Artists, Albums, etc that are in the cloud ...but the actual songs that are in the MATCH cloud never ever appear at all ...even after waiting hours!
The IOS 6 update seemed to work fine for both of our iPhone version 4 phones, but like I said above, only 1 of the phones is able to play music from iTunes MATCH now. This previous worked fine under IOS 5.1 for almost a year.
We also own an Apple TV 2nd generation and an iMAC with OS X 10.6.x, ...and those 2 device are also able play music that we have stored in the iTunes MATCH cloud with No Problem.
The issue seems to be with only this one phone.
Has anyone else experienced this? Does anyone have a suggested fix for this?

This helped me my repair my iPhone4's locally corrupted iTunes library (which calls my iTunes Match account) for all my music and music-video collection! It took all of 5 minutes to repair.
1. Google/download/install iExplorer (free program).
2. Plug in iPad or iPhone first, then open iExplorer.
3. Delete the iPad\Media\iTunes_Control folder's 3 Media SQL files.
4. Turn on iCloud/match in iPhone's (iPad's) iOS settings, which replaced the iPads music library with iCloud
A big THANK YOU to Michael Allbritton for pointing my in the direction of this solution!
Finally a note to Apple:
You will have to incorporate a way for users to view and self-repair the inner workings of their appliances if you wish to continue to sucessfully compete in this market ...remember what happened to Nokia for not forseeing the touch screen display many years ago! I would never expect my Mother, my young wife or even my teenage son to download something like "iExplorer" and use it to delete 3 corrupted database files; therefore, dear Apple, please incorporate the self-diagnosis and repair functionality offered by an iPhone Explorer type system into your iTunes software ...or something similar to that! Get with the program!

IMac 27" wifi issue after update to OS X 10.7.4

Hi all,
i can't access to wifi after update to OS X 10.7.4.
Anybody has remedy to this problem?
Is this software or hardware related problem?
Hope to get a reply soon.
Thanks.

Hi Thomas, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Wifi problems after update airport configuration

Hello, i have a question about my wifi. After i installed airport configuration 6.1 my computer said there is no wifi hardware installed. Does anybody knows how to fix this?
Or to get back to 6.0 ?

Thank you.
The problem is that I used to have a wifi network that let me go on the internet from my iPad, iPhone and laptop. Two days ago, it disappeared: no access to the internet via wifi from anywhere but my desktop. The old wifi network isn't listed anywhere, on my desktop or other devices that detect wifi.
I access the internet via ethernet from my desktop, via virgin media.
What I want to do is get a home network up and running again. Originally, it was all automatic - I didn't have to know anything to get it working. Then I followed some nifty spec on the forum to slightly alter the address of the device, and my other devices, so that I could use my computer's wifi from my Kindle. For the next 9 months, no problems. Then I casually updated the airport utility and poof, the wifi network vanished. And I don't know how to get a DHCP ID or anything else, because I didn't have to do it originally. I just plugged in my computer and did what I was told to.
This sounds so pathetic. I'm sorry. Is there some way I can just start all over again?

Failed to get WIF path after update?

Similar Messages

Maybe you are looking for