Failed to handle capwap control message from controller
Hello,
I am struggling in associating a 1242 AP's with WLC's.
Show version of the AP:
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(25e)JAM2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 29-Jul-13 11:32 by prod_rel_team
ROM: Bootstrap program is C1240 boot loader
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
AP0019.56b0.855e uptime is 9 minutes
System returned to ROM by power-on
System image file is "flash:/c1240-k9w8-mx.124-25e.JAM2/c1240-k9w8-mx.124-25e.JAM2"
Show inventory of the AP:
AME: "AP1240", DESCR: "Cisco Aironet 1240 Series (IEEE 802.11a/g) Access Point"
PID: AIR-LAP1242AG-E-K9, VID: V01, SN: FCZ10408384
When trying to attach it to a WLC 5508 running 6.0.199.4, the AP keeps on downloading image and power cycling.
When trying to attach it to a WLC 5508 running 7.4.110.0, the AP shows the following message :
Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
*Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
*Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7 Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
*Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
*Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
*Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7
Any idea ?
Many thanks !
here is the debug output:
login as: groupwls
(Cisco Controller)
User: groupwls
Password:************
Your password does not meet the strong password requirements.For added security, set a new password that meets these requirements. To prevent this message from showing again, disable the strong password feature.
(Cisco Controller) >debug pm pki enable
(Cisco Controller) >debug capwap events enable
(Cisco Controller) >*spamApTask2: Jan 30 09:46:38.639: 00:19:07:c6:39:60 DTLS connection not found, creating new connection for 10:64:94:52 (2134) 10:71:142:8 (5246)
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: called to get cert for CID 155224fa
*spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: called to get key for CID 155224fa
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 1, certname >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 2, certname >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: match in row 2
*spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: locking ca cert table
*spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_alloc() for user cert
*spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_decode()
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: C=US, ST=California, L=San Jose, O=Cisco Systems, CN=C1240-001956b0855e, [email protected]
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: O=Cisco Systems, CN=Cisco Manufacturing CA
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Mac Address in subject is 00:19:56:b0:85:5e
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert Name in subject is C1240-001956b0855e
*spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert is issued by Cisco Systems.
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: called to get cert for CID 2f6d981f
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.887: ssphmUserCertVerify: calling x509_decode()
*spamApTask2: Jan 30 09:46:38.898: ssphmUserCertVerify: user cert verfied using >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (current): 2014/01/30/09:46:38
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotBefore): 2006/10/05/13:05:43
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotAfter): 2016/10/05/13:15:43
*spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: getting cisco ID cert handle...
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: called to evaluate
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
*spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: called with 0x2c058e50
*spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: freeing public key
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Allocated index from main list, Index: 312
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS keys for Control Plane are plumbed successfully for AP 10.64.94.52. Index 313
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS Session established server (10.71.142.8:5246), client (10.64.94.52:2134)
*spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Starting wait join timer for AP: 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:40.199: 00:19:07:c6:39:60 Join Request from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:40.200: 00:19:07:c6:39:60 Deleting AP entry 10.64.94.52:2134 from temporary database.
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Version: = 117730816
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join resp: CAPWAP Maximum Msg element len = 87
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Response sent to 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 CAPWAP State: Join
*spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 capwap_ac_platform.c:1225 - Operation State 0 ===> 4
*apfReceiveTask: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 0
*apfReceiveTask: Jan 30 09:46:40.201: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.202: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.202: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.202: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.203: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 1
*apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.203: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.203: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
*apfReceiveTask: Jan 30 09:46:40.203: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*spamApTask2: Jan 30 09:46:41.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:41.023: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:44.029: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:47.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:50.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:53.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 CAPWAP State: Configure
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
*spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
*spamApTask2: Jan 30 09:46:56.022: 00:19:07:c6:39:60 Setting MTU to 1485
*spamApTask2: Jan 30 09:46:59.019: 00:19:07:c6:39:60 DTLS keys for Control Plane deleted successfully for AP 10.64.94.52
*spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 DTLS connection closed event receivedserver (10:71:142:8/5246) client (10:64:94:52/2134)
*spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Entry exists for AP (10:64:94:52/2134)
*spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
*apfReceiveTask: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
*spamApTask2: Jan 30 09:46:59.027: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
*apfReceiveTask: Jan 30 09:46:59.027: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
*spamApTask2: Jan 30 09:46:59.028: 00:19:07:c6:39:60 No AP entry exist in temporary database for 10.64.94.52:2134
*spamApTask0: Jan 30 09:46:59.127: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
*spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
*spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
*spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask3: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask0: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask0: Jan 30 09:47:28.995: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2134
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
*spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
*spamApTask0: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask0: Jan 30 09:47:58.856: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
*spamApTask0: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
*sshpmLscTask: Jan 30 09:48:10.688: sshpmLscTask: LSC Task received a message 4
Similar Messages
-
WLC 5508 - LAP1242: Failed to handle capwap control message from controller
Hello everyone,
after finally successfully upgrading my WLCs from 6.0.199.4 to 7.6.100.0 there is another problem showing up...
If I want to change any configuration regarding the APs on the WLCs (which doesn't work) I get the following error-messages from the APs:
*spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: msg type 12 does not supported payload 215
*spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: error in Unknown Payload(215) payload (received length = 9, payload type = 215)
*spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to validate vendor specific message element type 215 len 9.
*spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to decode Configuration update request.
*spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 7 state 11.
*spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.171: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
Find attached some informations regarding the AP and the 5508.
Any suggestions are, as always, highly appriciated.
Regards
ManuelGood morning,
if I need free space at the flash: How much is "enough" to handle config changes?
Here you can see the filesystem of one of my accesspoints (all are affected):
AP#dir all-filesystems
Directory of arch:/
2 -rwx 91288 Feb 22 2014 18:16:42 +00:00 event.log
8 drwx 448 Feb 22 2014 18:16:38 +00:00 c1240-k9w8-mx.124-25e.JAO3
4 drwx 0 Nov 2 2011 23:32:18 +00:00 configs
5 -rwx 397 Feb 22 2014 18:19:03 +00:00 env_vars
6 -rwx 6168 Feb 27 2014 18:14:24 +00:00 private-multiple-fs
No space information available
Directory of flash:/
2 -rwx 91288 Feb 22 2014 18:16:42 +00:00 event.log
8 drwx 448 Feb 22 2014 18:16:38 +00:00 c1240-k9w8-mx.124-25e.JAO3
4 drwx 0 Nov 2 2011 23:32:18 +00:00 configs
5 -rwx 397 Feb 22 2014 18:19:03 +00:00 env_vars
6 -rwx 6168 Feb 27 2014 18:14:24 +00:00 private-multiple-fs
15740928 bytes total (10614784 bytes free)
Directory of zflash:/
2 -rwx 91288 Feb 22 2014 18:16:42 +00:00 event.log
8 drwx 448 Feb 22 2014 18:16:38 +00:00 c1240-k9w8-mx.124-25e.JAO3
4 drwx 0 Nov 2 2011 23:32:18 +00:00 configs
5 -rwx 397 Feb 22 2014 18:19:03 +00:00 env_vars
6 -rwx 6168 Feb 27 2014 18:14:24 +00:00 private-multiple-fs
15740928 bytes total (10614784 bytes free)
Directory of archive:/
No files in directory
No space information available
Directory of system:/
2 dr-x 0 memory
1 -rw- 17631 running-config
No space information available
Directory of nvram:/
30 -rw- 0 startup-config
31 ---- 0 private-config
1 ---- 4100 lwapp_ap.cfg
6 ---- 528 lwapp_ap_tlv.cfg
32768 bytes total (26572 bytes free)
Regards, Manuel -
XmlHttpRequest AJAX not returning message from COMET server
I have the following COMET client javascript code:
function getResponse() {
document.getElementById("_receivedMsgLabel").innerHTML += "getResponse() called.<br/>";
if (receiveReq.readyState == 4 || receiveReq.readyState == 0) {
receiveReq.open("GET", "http://L45723:1802?callback=testcallback", true); //must use this URL at work.
receiveReq.onreadystatechange = handleReceiveMessage;
alert("handleReceiveMessage assigned to onreadystatechange event.");
receiveReq.overrideMimeType("text/x-json");
receiveReq.timeout = 100000;
var currentDate = new Date();
var sendMessage = JSON.stringify({
SendTimestamp: currentDate,
Message: "Message 1",
Browser: navigator.appName,
OriginUrl: document.URL
var sendMessage = "SendTimestamp=" + currentDate + "&Message=Message1&Browser=" + navigator.userAgent;
alert("JSON message created. About to send...");
receiveReq.send(sendMessage);
alert("Message sent.");
//function for handling the return message from Comet
function handleReceiveMessage() {
document.getElementById("_receivedMsgLabel").innerHTML += "Status=" + receiveReq.status;
document.getElementById("_receivedMsgLabel").innerHTML += "responseText=" + receiveReq.responseText;
if (receiveReq.readyState == 4 && receiveReq.status == 200) {
document.getElementById("_receivedMsgLabel").innerHTML += "Message received!<br/>";
var status = receiveReq.status;
var txt = receiveReq.responseText;
document.getElementById("_receivedMsgLabel").innerHTML += txt + "<br/>";
mTimer = setTimeout("getResponse();", 0);
getResponse();
The GET request is sent and received by the COMET server, which sends the response back when I choose to. The handleReceiveMessage() function is called, but the message the server sent is not in the xmlHttpRequest.responseText property.
Why?I suggest continuing the discussion in your thread on mozillaZine, since this site focuses more on end-user support.
[http://forums.mozillazine.org/viewtopic.php?f=25&t=2480435 xmlHttpRequest object - mozillaZine Forums] -
Blocking mobile messages from certain mobiles.
Can anyone tell me how to block mobile messages from a certain mobile source?
Regards,
Charlie Blank
[removed personal information]
Message Edited by dany_s on 11-12-2008 08:08 PM
Solved!
Go to Solution.Hi and welcome to the forums!
You can block in one of two ways:
1) You call block select types of text traffic. Go to OPTIONS/SECURITY/FIREWALL.
You can select the type of message traffic to block. This will however block all incoming messages for that
category. Example if you block SMS traffic, SMS messages from everybody will be blocked
2) You can call the carrier and have the number blocked as spam. Depending on the amount of messages,
you may be able to get the carrier to remove the texts from your bill.
2a) If you use AT&T as a carrier you can block and control messages from the link below. I do not know
if other carriers offer this service.
http://mymessages.wireless.att.com/do/mail/settings/sendersControl
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
Is there a way to control the number of consumed messages from JMS?
Hi everyone,
I have a BPEL process that is consumes messages from a foreign queue, performs a transformation, and passes it to Oracle Apps. I'm curious if there is a way to control the number of messages consumed at a time for processing.
For example, if we place 50 transactions on this queue, I would like to only consume 10. And then as each one is processed and passed to Oracle Apps, I would like to pull another transaction off the queue. So basically I would only be processing 10 at the most.
The issue I am having is we put 50 on the queue and the 50 are take off right away. But then half are making it into Oracle Apps and the remainder is failing with a JCA Connection Factory max connection error.
Instead of changing the settings to get more through, I am wondering if it's possible to limit the number being processes at any one time.
ThanksHi,
Have a look at the adapter.jms.receive.threads Property for JMS Adapter...
http://docs.oracle.com/cd/E21764_01/core.1111/e10108/adapters.htm#BABCGCEC
Cheers,
Vlad -
Oracle 10G JMS error : Failed to handle dispatch message ... exception ORABPEL-05002
Hi All,
We are using a JMS adapter as partner link in a BPEL process to produce messages to JMS Queue.
We are getting an error while producing a message to a JMS Queue.
The error comes for 1 or 2 instances among 5 to10 intsances. (all these instances ran with in 1 or 2 seconds).
We are using Oracle 10G SOA suite.
This error is getting in the Production environment.
The error is as follows (took error from server log).
Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection.
file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: oracle.j2ee.connector.proxy.ProxyInterceptException: javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback: null [Caused by: RollbackException: Transaction has been marked for rollback: null]
; nested exception is:
ORABPEL-12511
Adapter Framework unable to create outbound JCA connection.
I tried the below JMS tunings with differnt combination, but no improvement.
<property name="useJCAConnectionPool">true</property>
<property name="maxSizeJCAConnectionPool">500</property>
<property name="retryMaxCount">10</property>
<property name="retryInterval">60</property>
Please let me know if any other logs or any other information is required.
Thanks,
Pershadsorry, I forgot the below things which I tried to tune the JMS.
<property name="retryMaxCount">10</property>
<property name="retryInterval">60</property>
<property name="useJCAConnectionPool">true</property>
<property name="maxSizeJCAConnectionPool">500</property>
Thanks. -
ESB calling BPEL: failed to handle message error
Hi all,
I'm trying to invoke a BPEL process from an ESB process but I'm getting the following error:
<2007-03-21 12:38:26,458> <ERROR> <default.collaxa.cube.engine.dispatch> <DispatchHelper::handleMessage> failed to handle message
javax.ejb.EJBException: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException
javax.transaction.RollbackException
at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:582)
at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:244)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:130)
at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:433)
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:132)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeDeliveryBean_LocalProxy_4bin6i8.handleInvoke(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
javax.ejb.EJBException: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException
at com.evermind.server.ejb.EJBUtils.createEJBException(EJBUtils.java:365)
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:139)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:57)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeDeliveryBean_LocalProxy_4bin6i8.handleInvoke(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.transaction.RollbackException
at com.evermind.server.ApplicationServerTransaction.checkForRollbackOnlyWhileInCommit(ApplicationServerTransaction.java:582)
at com.evermind.server.ApplicationServerTransaction.doCommit(ApplicationServerTransaction.java:244)
at com.evermind.server.ApplicationServerTransaction.commit(ApplicationServerTransaction.java:130)
at com.evermind.server.ApplicationServerTransactionManager.commit(ApplicationServerTransactionManager.java:433)
at com.evermind.server.ejb.EJBTransactionManager.end(EJBTransactionManager.java:132)
... 29 more
<2007-03-21 12:38:26,458> <ERROR> <default.collaxa.cube.engine.dispatch> <BaseScheduledWorker::process> Fallo al manejar el mensaje de distribución ... excepción ORABPEL-05002
Error del manejador de mensajes.
Se ha producido una excepción al intentar procesar el mensaje "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; la excepción es: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException
ORABPEL-05002
Error del manejador de mensajes.
Se ha producido una excepción al intentar procesar el mensaje "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; la excepción es: An exception occurred during transaction completion: ; nested exception is: javax.transaction.RollbackException
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:171)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
at WorkerBean_EndPointProxy_4bin6i8.onMessage(Unknown Source)
at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:266)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
I've been looking through the Internet but i haven't found anything. this same process has been working, so I don't understand anything. Please, can anyone help me? thank you very much.It sounds like the BPEL process is failing. Is there an error instance n the BPEL console? Can you test the BPEL process standalone from the BPEL console?
-
Not getting a handle to Seeded VO from custom region controller
Hi Freinds,
I am embedding a custom region to a seeded page by personalization.
I have an AM and VO for custom region.
When i am trying to call a seeded VO from my custom region controller i am not able to get a handle to it properly.
I tried to get rootAm and then i called seeded VO. Some times i will get control but not able to create a rowsetiterator for that VO.
OAApplicationModule rootAm=pageContext.getRootApplicationModule();
oracle.jbo.ViewObject spupdateVo=rootAm.findViewObject("SpecialInformationUpdateVO1");
RowSetIterator tblvorow= tblVo.findRowSetIterator("sptblVoRow");
it is erroring at line 3.
please help me to understand how to get a handle to seeded VO from custom region controller.
My requirement is to loop through that seeded VO records.
Thanks in advance..
JyothiHi,
I think you need to extend the controller at the pageLayout Region which would have access to all the regions and also their corresponding AMs.
--Sushant -
To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. -
My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again. I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month. I need a permanent solution that I should be already paid for with 8 pro.
After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software. However I have again lost my Acrobat tab in Outlook 2007. I need that back, but today an even bigger problem arose. AA8 has stopped printing to fax. It faxes a blank page. The only fax printing option is “Microsoft Shared Fax Driver”. My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago. My OS is Windows 7 Professional.
I have tried doing the updates you referred to but I get error messages like these:
“No qualifying products found to apply this update, or update has been already applied”
or
“The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.” -
Filter failed message from printer
I get the filter failed message from printer - an Epsom 387.
It has worked wirelessly for over a year - today it will not.For my
Epson Stylus Photo PX720WD
I found downloading
* Mac OS X Common Updater (v8.0) 12-May-2011 36.94 MBs *
With the Mac OS X Common Updater you keep your printer drivers always up to date
Very very helpful......
YOU CAN FIND IT AT
http://www.epson.co.uk/gb/en/viewcon/corporatesite/products/mainunits/support/10 840
it worked straight away.. i hope it helps you also. -
BCS - Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'.
Hello,
I have create a an external content type .
I Choose "Connect with user's Identity".
I create a external list that uses the ExternalContentType.
When I try open the external list from browser by User "TestUser" . I get the following error "Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'"
My Question :
I need to know why pass the credential "NT AUTHORITY\IUSR" to connect to the data base not the
current log in"TestUser" ? How Can I solve it ?
Thanks
Hema
ASkHi,
did you configure Kerberos delegation?
NTLM fails when you try to open external list from client computer, because SharePoint cannot pass user's identity - "Double Hop" issue.
Take a look at confguring Kerberos for SharePoint 2010 white paper
Download Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products from Official Microsoft Download Center
http://www.microsoft.com/en-us/download/details.aspx?id=23176
Robi MCT Kompas Xnet d.o.o. Ljubljana | blog: http://xblogs.kompas-xnet.si | website: http://www.kompas-xnet.si
Slovenia
Please vote if you find reply useful or mark it as answer.
Thank you -
Fault handler triggered for "100 Continue" messages from web service
I'm using the Flex/Flash "WebService" class to connect to a .NET4 web service.
Things always work fine unless the service sends a "100 Continue" message,
(which it does seemingly at random, which is allowed by HTTP1.1).
The problem is that Flex/Flash does not appear to handle this message.
It triggers the fault handler with the following message:
"SOAP Response cannot be decoded".
The message body pulled from the Flash Builder's "Network Monitor" window (raw view) is:
HTTP/1.1 100 Continue
Server: ASP.NET Development Server/10.0.0.0
Date: Tue, 21 Aug 2012 14:42:25 GMT
Content-Length: 0
If I understand correctly, any client using HTTP 1.1 should be able to handle "100 Continue" messages even if they didn't ask for them.
Does anyone know what's going on here?
Here are the software versions of everything involved:
Flash plugin: 11.3.300.257 (ActiveX)
Flash Builder: 4.6
Flex Compiler SDK: 4.6.0
OS: WinXP Pro, 32-bit, SP3
Browser: IE 8.0.6001
Web Service: .NET framework 4
Any help/advice is greatly appreciated!!Update: The problem also occurs with Firefox 12 using the debug version of FlashPlayer 11.3.300.257, so I don't think it's a browser issue... Looks like Flash itself.
-
So what is up with this error message in Muse?
MuseJSAssert: Error calling slector function:SecurityError: Failed to read the ‘contentDocument’ property from ‘HTMLIFrameElement’: Blocked a frame with orign “null” from accessing a cross-origin frame.This is a genuine security error generated by the browser when viewing a page with iFrame content locally.
Please refer to Zak's reply in the following thread: https://forums.adobe.com/message/6496180#6496180
Cheers,
Vikas -
WCS Refresh Config from Controller Fails
Have been able to refresh config from controller successfully in the past, but now it only works on 1 of 4 controllers. Receive error "Failed (see logs)". Any idea why this would fail, and/or where I can find these logs? All controllers are reachable.
For what it's worth, it is generally recommended that the WCS be at a MORE recent or same revision level (in terms of date, not version numbering, per se) as the controllers.
Have you upgraded the controllers prior to the WCS? It is my understanding that upgrading in the wrong order (i.e.: Upgrading the WLC/WiSM before the WCS is upgraded) might cause problems.
Just a thought.
- John
Maybe you are looking for
-
Hard Drive Upgrade on 17" MacBook Pro, 2.4 GHz Core 2 Duo
I have a 17" MacBook Pro, 2.4 GHz Core 2 Duo, with a 160 GB hard drive. I am looking to upgrade the hard drive. Will a WD Scorpio Black, 320 GB SATA, notebook hard drive fit into my MacBook Pro?
-
How to get deleted programs in the start menu?
Hi, I foolishly deleted (by accident) my all programs folder on the start menu. This has emptied the programs folder on the start menu through windows explorer as well. I still have access to all of my programs by searching for them or by going throu
-
First post, looking for new Demand5 eps
Hello forum As stated first post so keeping it simple. Where is the last Walking Dead episode (25/08) on Demand5 in Catch Up section. It has regularly been accessable by 12pm Monday since season 3 aired but no sign of it today. I noticed the new Once
-
How to set Preview as default app to open pdf's?
Hi, Somehow I switched to Adobe Reader as the default app with which to open PDFs and I don't know how to switch back to Preview. Help? I'd like to be able to click on a PDF or download one with Safari without opening Reader but opening Preview inste
-
I always turn on my computer first thing in morning to see if any important e-mail comes through and since it's at least another hour before I get to work, the computer goes to sleep. Well, yesterday, the display wouldn't wake up and stayed black. I