'failed to initialise' and 'error 130200'

Any advice gratefully received - able to install 9.3.4. But current update shows eror messages as above.
Have uninstalled and sought to reinstall, same issues.
OS is XP.
Richard.

I just got this message here in 2013. Anyone ever figure out how to fix?

Similar Messages

  • ITunes failing to sync, and error message 1621

    A few days ago, my iTunes, upon noticing my iPod touch plugged in, reported that it had failed to sync do to a "dataclass error". The message said something along the lines of "iTunes was unable to load from dataclass services. try reconnecting." I did just that, unplugging the iPod and plugging it back in. This time, iTunes again failed to sync, saying that it was entirely incapable of interacting with the iPod, suggesting that I restore the thing. Though frustrated, I did that. 2 hours later, the iPod was fully synced from back up, and the problem was seemingly solved.
    But now it just happened again, only worse. After telling me to try restoring, and after 5 minutes of iTunes trying to restore the iPod, it finally reported that it was unable to, reporting an "error message 1621, unkown error occured, unable to restore iPod." So, now I can't sync my iPod. Not only is iTunes currently unable to interact with it, it can no longer restore it either.
    What's going on? Also, if it helps, this didn't start occuring until after I installed the 2.0 update. I have iTunes v7.7.1.11, and my iPod touch is updated to version 2.02.

    i am having the same problem as well. anyone have any idea how to fix this issue?
    thanks, ff

  • Service 'iPod Service' failed to start and Error 1503

    Thanks to all the people who have provided answers posts... they have helped me get to this point!...
    I have a slight variation on this issue - an Error 1503...
    My original symptom was that I couldn't get iTunes to recognise my iPod so I tried to install 7.2.0.35... and right at the end I got the message about "iPod service failed to start check your permissions"...
    I use AVG Free 7.5.472, Sygate Personal Firewall 5.6 and Spybot Search and Destroy 1.4, but for the install I have used msconfig to shut down everything other than iTunes and QuickTime...
    When I run services.msc I get 2 versions of iPod Service listed - one as "iPod Service" and the other as"iPodService" (i.e. no space between iPod and Service)... the "iPodService" is started but the "iPod Service" is not and when I try to start it I get a message "Could not start the iPod Service service on Local Computer. Error 1503: The service did not respond to the start or control request in a timely fashion"
    Would appreciate any assistance!...
    Many thanks in advance...

    I had been experiencing this error for a long time since iTunes 7 released. I tried different ways to resolve it. Untill today, I found a possible resolution and sucsessfully install iTunes 7.3.1.3. I think that might be helpful.
    First, remove all previrous itunes and install the lates t release. You will stuck when trying to start iPod service. Open c:\program files\iPod\bin. You will see iPodService. Double click it. If you got an error about a .dll file (mine is setupapi.dll), remember it and you can continue....
    2nd, put xp disk in dvd/cd-rom. Open C:\WINDOWS\system32 and locate the .dll file and rename it. This moment, your cd is running trying to rebuild the dll file just renamed.
    3rd, when cd-rom stop running. Retry to start service again. Good luck, I hope you can resolve it.
    I checked some microsoft KB for this error. This might happen when xp system been customized or dll file corrupted.

  • ITunes update fails MSVCR80.dll and Error 7 messages

    Apple update launched and have continued to get MSVCR80.dll missing errroe and Erro 7 (windows 126 error) messages after multiple attempts to install Windows 7 64 bit iTunes update and download.
    Have uninstalled, etc 6 or more times.
    iTunes will not load from the PC

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Installer fails to initialise

    Installer fails to initialise and I have followed the Adobe support advisor suggestions. What could I do now?

    Were you able to successfully complete the download process?  If the installer is failing to initialize then you will want to review the PDApp.log.  You can find more details regarding how to review this log in Troubleshoot CS5 and CS5.5 installation with install logs.

  • I purchased and downloaded Photoshop Elements 13, but the installer fails to initialise. How do I get it to work?

    I have Photoshop Elements 10 and Premier Elements 10 installed on my PC. Both were installed from discs that I bought a few years ago. I recently purchased the upgrade (by download) for both applications to version 13. In accordance with the (scant) instructions received by email, I downloaded the four files required from the Adobe site. I subsequently ran the .exe files, which in turn created directories on my PC, including set-up.exe files for both applications. When I run the setup files, I get an error message stating that the installer failed to initialise. The error message advised me to download the Adobe Support Advisor to detect the problem. That tool does not exist. I then sought assistance from the Abobe support site, initially using the hyperlink suggestions, which were of no use, then using the chat function. The operator kept trying to get me to do something with something called 'Creative Cloud'; which I am not familiar with, and do not use. He then instructed me to download and run a CS5 cleaner tool; however, none of the choices offered by that tool include my issue, or either Photoshop Elements or Premier Elements. I am reluctant to uninstall version 10 of the programs in case I end up losing the lot and therefore wasting even more money than the purchase price for this upgrade.
    All I want to do is upgrade my two applications from version 10 to version 13. I have paid the requisite fee but it clearly does not work. I appear to have totally wasted my money. Can anyone please tell me how to get it to work? I do not want to have anything to do with the so-called ‘Creative Cloud’ as I have no idea what it is, and I do not want to lose what I already have (and have paid for previously).
    I have tried for a few days to access the so-called 24/7 chat assistance but appeared to have been locked out as every time I try to access it, I get a message that the (24/7) chat is closed. Adobe has taken my money for a product that does not work, and also refuse to help me fix it.
    I am very frustrated with a product I bought that does not work, and a 24/7 support service that clearly is not 24/7, and which refuses to assist me. Can anyone PLEASE tell me how to get this to work? Rod.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'.  This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes.  Any ideas?

    Trying to burn a playlist in itunes and i get this message at the end 'The attempt to burn a disc failed. An nknown error occurred (4450)'.  This is with a new Dell laptop running windows 8. The playlist was 17 songs from cd's and itunes.  Any ideas?

    try this...
    This is how I managed to fix the problem...and I hope this helps others in the similar situation.
    I tried with another program..latest version of Nero, and this was also stopping at the 'initialising' stage. I was now lost! I thought the last resort is to give Evesham (My PC manufacturer) a buzz. They were very helpfull. Basically go into 'Control Panel', 'System', and click on the Hardware tab, then 'Device Manager'. Uninstall everything in the DVD/CDRom Drives. Then uninstall everything under the catagory IDE ATA/Atapi disk controllers. This is where my problem was, as I only had one IDE channel here. You should have 4 or 5! Reboot your machine, and everything will automatically re-load. I tried burning using Nero and it worked. Then the big test was iTunes. It worked 1st time!
    I asked why the IDE channels have dissappearred, and he said sometimes uninstalling Programmes occasionally removes them.
    I hope this will help others who are having problems to burn stuff on iTunes.

  • Failed to Initialise Error

    Need some help! when i try to set up the creative loud, i am getting the error message - failed to initialise. Any suggestions?

    Hi Ashy_louise,
    Please follow the article: http://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html and re install CC Desktop Application.
    Let us know for further query.
    Regards,
    Ratandeep

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

    I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

    Zap the PRAM and Reset the SMC, then try again.

  • PE dism error - failed to get and initialize the PE provider

    This all started with: Win 8.1 could not be installed. error code 0X8007003. I ran DISM successfully with the /RestoreHealth flag, but it made no difference to installing Win 8.1. I ran DISM again (successfully) and looked at the log for "fails".
    The repeated fail was:
    2011-06-10 10:12:47, Warning               DISM   DISM Provider Store: PID=2552 Failed to Load the provider: C:\Users\ROSMAR~1\AppData\Local\Temp\0709052E-4C8D-43AD-B837-FB57E1CF832A\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2011-06-10 10:12:47, Info                  DISM   DISM Provider Store: PID=2552 Failed to get and initialize the PE Provider.  Continuing by assuming that it
    is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    How can I fix this? Is this the reason I can't install Win 8.1? Should I be looking at something else to fix whatever is generating error code 0X8007003?
    Thanks.

    WIM format changed in Win 8.1. You need to use the DISM from the ADK from Windows 8.1. Older versions of DISM cannot service drivers or packages for example.

  • Creative Cloud Installation Failed Download Error - Error Type -7 and Error Code - 401

    I subscribed to Creative Cloud in December 2012 and have been trying to install the applications, but the "Installation Failed" through the Adobe Application Manager. (see screenshot)
    Here is a line from my log file:
    01/08/13 11:08:48:346 | [WARN] |  | ASU | PDApp | DownloadError |  |  | 6120 | Download Error has come with GDE Error type - -7 and error code - 401
    I tried searching for the same error code in the "knowledge base" but couldn't locate any.
    I am on a Windows 7 (x64) machine. I also have CS5.5 installed.
    Anyone have this problem? Please help or point me in the right direction if you can. Thanks!

    Thanks Romsinha,
       I tried the above steps, with no luck.  I have admin rights on both laptop and desktop I'm trying to install to.  I have updated my AAM on both machines with no issue (when using the direct link above). But when I click the 'Try' link to download an application, it shows the scrolling status bar for a few seconds, then  "Installation Failed"  'Download error. Press Retry to try again or contact customer support. (-7)'   Retry only produces same results.
    Both machines are running Win 7 Pro - SP1 64bit
         (laptop - 16 GB RAM & Core i7-2760QM 2.40 GHz processor)
         (desktop - 8 GB RAM & Xeon W3520 2.67GHz processor)
    I am running in a corporate setting with I'm sure all sorts of Firewall protection etc...
    I'm planning on asking for a CC membership, but wanted to check out the new features first....
    Thanks!

  • My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help

    My iPhone 4 fail to update to iOS 5 and now it can't restor the firmware I am geting and error it says The iPhone "iphone" could not be restored. An unknown error occurre (-1) . Plese help

    My iPhone 3GS is getting the same error. I've called Apple a bunch of times, and they won't get back to me. I'm searching through discussions to figure out a solution.

  • I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do.

    I am trying to update I-tunes, but I get the following error message. Service Apple Mobile Device failed to start and wants me to verify I have sufficient priveledges to start system services.  I do not know what to do. I am the only user on my HP Pavillion laptop. Help!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • Adobe update process fails due to Error 130200. solutions please

    adobe update process fails due to Error 130200. solutions please.  Shyam

    Is there anything else beside the number 130200?
    Try downloading the update from http://www.adobe.com/downloads/updates/
    If you still need help, please tell us your operating system details.

Maybe you are looking for