Failed to initialize privileges when trying to boot a zone

I just installed build 69 on a Sun Blade 1500.
I tried setting up a zone called myzone using the following configuration
zonepath: /export/myzone
autoboot: false
pool:
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
net:
address: 10.1.x.y
physical: bge0
rctl:
name: zone.cpu-shares
value: (priv=privileged,limit=10,action=none)
When I try to a zoneadm -z myzone boot I get the following error message
bash-2.05b# zoneadm -z myzone boot
zoneadm: zone 'myzone': Failed to initialize privileges: Invalid argument
zoneadm: zone 'myzone': call to zoneadmd failed
I've tried to uninstall the zone and install it again but there is no go. Could someone shed some light on this?

I'm afraid that you've posted your question in the wrong forum. This one is for the now-retired desktop application for Acrobat.com, not Adobe Reader.
You should get more informed responses if you post in the Adobe Reader (not Acrobat.com) forum: http://forums.adobe.com/community/adobe_reader_forums/adobe_reader

Similar Messages

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

GenericServiceFactory initialization problem when trying to load Web servic

Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advance

Hi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger

'Failed to create object' when trying to open PDF attachment in Dynamics GP 10 OLE notes

Microsoft Dynamics GP 10 users who updated to Adobe Reader X are getting errors when trying to open or create an OLE attachment on a note.
They get 'Failed to create object' when trying to open an existing and getting 'Failed to connect.
And " Link may be broken" when trying to create a new one.
PDF attachments work pretty fine with previous version of Acrobat reader 7,8,9 up tp 9.4
Now that we install Acrobat X, something has changed.
It only does this for PDF attachments, Other file types work fine.
I was able to remove Adobe Reader X and install a prior version to work around the issue.
Has Adobe developed any Fix for the integration of X and OLE objects.
regards,

Hi Gestis,
What version of Adobe Reader are you using?
If its less that 10.1.2, please update it to 10.1.2 and then try to open PDF attachment inDynamcs GP OLE notes.

"NTLDR is missing" error message when trying to boot R&R Recovery from USB HDD? !

Does anyone know what/why I am getting a "NTLDR is missing" error message when trying to boot from USB HDD? I copied my backup to a USB HDD and made it bootable via R&R but I am still getting this error. Help!
I have a T61 if that helps any.
Brad
Brad R
T61 4GB RAM Intel T8300

the master boot record (MBR) needs to be repaired for that to work.
what OS are you using?
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Windows Server 2012R2 Fatal Error C0000034 when trying to boot

Hi.
We patched our Server 2012R2 DC today to fix against CVE-2014-6324 using Windows update. After rebooting, we are now unable to boot and receive the error stated in the title when trying to boot.
Our primary DC however had no issues applying the update and rebooted perfectly fine.
I can only seem to find articles relating to Windows 7 SP1 regarding this error code. Is there a method for recovering this with Server 2012R2?
Thanks.

Hi，
I think we could check if other update installed correctly.
Did you try to remaing pending.xml file to check the result?
http://blogs.technet.com/b/joscon/archive/2011/03/16/new-information-on-error-code-0xc0000034.aspx
Regards.
Vivian Wang

External Hard Drive Not recognized when trying to boot from it.

So I am trying to boot from my external hard drive through firewire but my computer doesn't seem to recognize the external. There is some problem with my Macbook not booting up correctly and I want to backup my data before reinstalling Tiger. They did this at the Apple store and ran disk utility on it my Macbooks hard drive. I could access all my data, but now when I get home and plug in my hard drive, hold down option after booting, the only drive that pops up is the Mac HD. I read somewhere to try partitioning the external drive as Mac Journaled and I did so with my working Macbook Pro. Any ideas whats going on?

Well i got most of my information off the old one, now I am trying to reinstall Tiger to the MacBook. Problem is I initially tried to do an archive install and the install kept failing after the second disc when it asked for the second install disc.
The people at the Apple store suggested that I try to do a wipe of the hard drive and install. Now when I put in the Disc 1 install disc and boot from the cd drive it just sits for a while and then ejects disc 1 and goes back to the place where the install failed from before ie: it keeps asking for the second install disc.
I can't figure out a way to get around this and just do a clean install on the machine. Any thoughts would be great.

Satellite A200 screen stays black when trying to boot

Hello everyone,
My Toshiba Satellite A200 notebook is not working anymore, so everything started when I was playing a game, suddenly, the screen turned blue with some tiny text written on it. I had to hold the power button a few seconds to close it because nothing was happening on the computer. I then pressed the power button to open it. Everthing was going well, until the welcome screen. At this part, it was written "Welcome" but the Vista loading circle left of it wasn't turning.
After a few seconds, I decided to close the computer again, so I did hold the power button so the computer closed. Here is the problem : I tried to reopen it, but the screen stayed black. Nothing was happening. The power light was blue, but not any computer activity. So I let it like that a few minutes then closed it and tried again, but the same thing happened. I tried to disassemble it and noticed one of the two memory card wasn't fully in its slot. I fixed it, but it didn't fix the problem.
I also tried to plug another screen on it, but that one was also black. So I put back the screen on its computer and tried to boot my laptop and it worked. It was booting, but the first problem came back, the Welcome screen was frooze there. So yes I did close it again and then the same thing happened, the screen stayed black.
I don't think the problem is the screen because as I said sometime it goes to the welcome screen. Also I don't hear any welcome sound when the screen stays black as if the computer would simply not start up. And as I said earlier, I don't see any computer activity on the little light in front of the computer. And left of this one, I clearly see that the computer is ON because the power light is blue.
So this is my problem, next time the computer manages to start up I'll try to boot it on the SAFE MODE, but until then, I don't know what to do. Please, help me.
Thanks in advance,
MrRoy
EDIT :
After letting the computer turned off for about 30 minutes, I started it, and booted in safe mode. At this step, I securely closed my comptuer with the shut down button instead on holding the power button. Then I reopened my computer, and it booted and the problem was fixed. Now my notebook is openened and working.
So if this is happening to you :
1. Shut down you computer.
2. Wait for about 30 minutes.
3. Boot in safe mode
4. Shut it down using the shut down button istead off holding the power button.
That should work.

Finally, it doesn't work. I don't know why but my computer did start up after the 30 minutes, but now it's not working anymore. It just won't startup like I said later, with a black screen.
The computer did work for about half an hour. I mean, I managed to start it up but after executing a program, it just froze and I had to hold the power button to restart it. I did it about 3 or 4 times, then it simply did the black screen again. I think the problem is my processor, maybe it's damaged or something, could it be possible?
Because I see that the processor isn't working when I try to start it up.
So let's say it's damaged, would that be the symptoms of my computer?
And if it's the processor, the only way to fix it is to send it to a reparator or something, because I don't feel like it, I'd rather do it myself.
But right now, my computer is simply not booting, like I said in my previous post.
Thanks in advance,
MrRoy
Note : The edit button wasn't there so I had to double post :/

Y do I get a quicktime failed to initialize error when i try to download itunes?

Why do I get an error message saying quicktime failed to initialize when downloading i-tunes?

Check this Apple document out -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Try following the steps in that article, which will have you remove iTunes and the other bundled Apple software. Then download and install iTunes.

Logon Failed - Invalid element error when trying to connect to SalesForce

I had a working crystal reports database connection to salesforce until I installed a Crystal Reports update on my machine. It is currently running v12.2.0.290 (CR Developer).
Since the update when trying to connect, I enter my password and salesforce security token to get access to the database but now I receive an error that says:
Logon Failed
Details: Unexpected error
; nested exception is
org.xml.sax.SAXException: Invalid element in com.sforce.soap.partner.LoginResult - metadataServerUrl
Help is resolving this error would be appreciated.

Hi Ron -- you have installed SP2 of Crystal Reports 2008. You will need to install the FP 2.2 as per this thread -- Crystal Reports 2008 SP2 update to the Salesforce.com connectivity
Let us know if this solved your problem.
Thanks,
Pete

I get a "failed to initialize" message when I try to download Reader XI

I'm running windows XP SP3, after opening any pdf doc my computer would lock up. I uninstalled my current version and tried to download the most recent version. no mater what I tried I would get the same "failed to initialize" message. I've disabled AVG, tried using Mozilla and IE8, uninstalled Flash Player all with the same results. What else can I try?

You can try using this tool to remove all traces of previous versions of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
and run it immediately after restarting your computer.

Strange image when trying to boot from os disk??

So I was trying to boot my macbook from the os disk it came with because it was stuck on the gray apple and spinning wheel screen..Then this came up and its been stuck on it since. I can't move the mouse and none of the keys work. What does it mean?

This is the installer not registering that it is on a laptop and looking for a mouse, the image is suggesting switching on a bluetooth mouse. For a workaround, temporarily connecting a USB mouse will also get past this screen.

I am having keyboard problems when trying to boot up an OS (bootcamp on Mac Mini Server)

I recently tried using bootcamp on my new Mac Mini Server.
I uploaded a windows ISO Image perfectly the way it asked, Windows 7, I followed the correct steps, euqally divided one of the hard drives, and I was ready to actually set up the new Windows section of my computer. During this booting session, my dog came in the room with her ball and knocked the computer plug out of the socket. Now when I turn on the mac, the fan still works, the same Macintosh sound comes up, the screen turns that usual very bright gray, but it stays on that gray. After a minute or two, the screen turns black, with a blinking underline, as if it were confused to choose which operating system it has to boot.
My problem here is that I use a wireless keyboard (not by Apple) -- and I suppose that bluetooth syncronizes with the OS and not the computer system itself -- so my keyboard commands do not get recognized in order for me to navigate into Windows 7 or OS X Mountain Lion. I tried solving this problem by purchasing a brand-new USB keyboard (since Mac Mini Servers do not have the PS/2 entrance). I guess this new USB keyboard didn't work, I imagine, either because the USB slots on the machine are not recognized by the computer's internal system, only by the Operating Sysytems (which I hope isn't true), or that the mac had never used that USB Keyboard and wasn't going to be capable of using it until it had installed the necessary drivers, but without the OS running that would become impossible.
So my question is: Is there a way that I can connect a keyboard to the mac so I can continue installing my alternate Operating System? Is it maybe another problem all together?

It is starting to sound more like Bootcamp failed to install properly.
Have a look at > Boot Camp 5: Frequently asked questions
then perhaps > Failed bootcamp instlation - Google Search

File flashing when trying to boot up iMac 5k

When I try to boot up my iMac 5K a grey file with a ? Inside of it which flashes is all it will do, I tried to repair my hardrive and believe I erased the Intire system files as well as the boot drive, when i try to install OS X from recovery mode it will not let me even though my internet connection is online and running. Any ideas what i could have done and should I download yosemite onto a cd or flash drive using my MacBook air and then try to install it manually onto my iMac 5k or ?

A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Black screen when trying to boot to CD (using Option or C) on startup

Hi, everyone. I'm working on a Mac Mini (mid-2011 vintage) with an attached Superdrive (recently purchased). My monitor is an older VGA monitor linked up to the mini using a Mini DisplayPort to VGA adapter (plugged into the Thunderbolt port). Video runs fine, but when I try to boot to CD to try to reinstall OS, and either hold the Option key or hold C when I hear the chime, I never get any video. The screen is completely black. The moment I release Option or C, I get the usual logon screen. So I never get a screen with selection of boot devices and the mini never boots directly to CD. I'm not sure where to proceed with this and don't really want to go out and purchase a Thunderbolt monitor just to see if that would work. Anyone have any ideas that I could pursue? Thanks.

Thanks for responding. I'm actually trying to set up the Mac mii as my VMware ESXi 5 server (per Paraguin software guide, see http://paraguin.com/2012/01/10/the-mac-mini-vmware-esxi-5-server-part-2-installa tion/
Nobody following their procedures and posting on their site has had any (reported) video issues, but that was my guess, that somehow video drivers are not being loaded.
BTW, did you mean "hold the option key" at bootup cause my mac keyboard doesn't have an alt key?
Thanks. Still looking for other options.

Failed to initialize privileges when trying to boot a zone

Similar Messages

Maybe you are looking for