Failed to install 1 file

I recently upgraded to a Palm T/X and after a couple of issues with synchronizing and installing files I think I've got the issues solved by changing the conduit of certain programs and upgrading to the new Palm Desktop (which I don't like as well as the old one but, Oh well!) it works OK specially installing files and that is all that matters. My recent issue is with a program I bought to back up my Palm since I no longer could do it by just inserting the backup card and restoring or backing up. This is the message I get when synchronizing: Failed to install 1 file(s) - BackupBuddyVFS.PRC - Invalid handheld file (file deleted) - Conduit Error: Invalid synchronization type (1012) - CONDERR_BAD_SYNC_TYPE.
I appreciate any help I can get, hopefully this is the last issue I have and I can start enjoying my new Palm.
Thanks!!!
Post relates to: Palm TX
This question was solved.
View Solution.

I upgraded from a Palm Zire72 and I'm pretty sure I followed the installation and synch instructions but I don't recall it asking to rename the backup file but I may be wrong. I've downloaded other applications including NVBackup without any problems. I guess I don't need it now since I have NVBackup but I paid for BackupBuddy and would like to see what it does. The one thing I can tell you is that I deleted a few files that I thought I no longer needed to make some room such as a couple of games and AvantGo. Hope this gives you some ideas and can help figure it out.
Post relates to: Palm TX

Similar Messages

Post install checks failed for DBC file - Oracle App11.5.10.2 Linux 5.3

Hi everybody,
I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
DBC generation failed with exit code 127
Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
DBC generation failed with exit code 127
Updating Server Security Authentication
Updating Server Security Authentication failed with exit code 127
adgendbc.sh exiting with status 127
ERRORCODE = 127 ERRORCODE_END
.end std out.
touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
/jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
.end err out.
Thanks in advance.
sreejith

Welcome to the forums !
Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
HTH
Srini

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

An error occurred while attempting to install the BizTalk application: Failed extracting CAB files.

Ok I have a BizTalk Application that's called :
FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200
I know that is a long name but why should I be punisched when I create an installer for that. I also have a WebService that exposes this schema. And this webservice is stored inside the MSI cab files. So far so good.
But now when I try to install this MSI alongside all my other MSI's I get the following message :
Failed to extract file "C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd".
(Length=306)
The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters., (NULL), (NULL), (NULL).
If i could install in C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200 but the extraction would take place in d:\temp or whatever, I would not have a problem. But unfortunately it extracts in a subdir of an already
very long path......
Is there anybody who knows how to solve this... (can I tell the MSI to use D:\TEMP\ as an extract folder).
And using shorter names is not an option.
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

You can control the destination path of resources in your MSI by modifying them in the Resources folder of a BizTalk application.
%BTAD_InstallDir% defaults to C:\Program Files\Generated by BizTalk\... etc etc. You can put in whatever you like here.
You can get more granular control over the resources by using the
BTSTask.exe tool.
If you can tell me how to make the extract process of he cabs point to c:\temp i will be happy to use BTSTASK (wich i am already doing). But the problem is with the extraction oft he web service. It will extract to :
C:\Program Files\Generated by BizTalk\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200\36FAA7B1-99DE-4AF6-A910-ED56D02D84EF\WebDirectory\-FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.WES\App_Data\FH.CCE.CDM.FinancieleOpdrachtLogistiekMiddel_v0200.Schemas.FinancieleOpdrachtLogistiekMiddel_v0200.xsd
Wich is just to long. I want the cabs to extract to c:\temp or something like that.....
Well0549, Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Adobe Photoshop CS5 Windows Finnish update files failed to install/load

Adobe Photoshop CS5 Windows Finnish update files failed to install/load.
Loading updates fails at the end of the loading. Tried it yesterday and today same errors. Are the files corrupted at server or how to fix this ?
Adobe Bridge CS5 4.0.5-update
Adobe Extension Manager CS5 5.0-update
Photoshop Camera Raw 6.7-update
Photoshop CS5:n Photoshop 12.0.4-update

update by downloading the files directly and then applying them:
pre cc updates: http://www.adobe.com/downloads/updates/

Update to 31.0 "stub" file and full install file fail to install Firefox. Removed Firefox and tried and it STILL does not install. Windows 7 OS

The 31.0 stub file failed to upgrade on my XP system but was able to overwrite with full install file. But the Windows 7 refuses to update or overwrite. It gets as far as extracting the files and then just stops.

Try this:
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
*Start the installation with a double-click on the desktop icon

AnyConnect 3.1.01065 error - Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established.

I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.

Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...

Failed to install IsKernel Files

Hi everybody,
I am trying t install BBDM ver 4.2 on my PC(OS Win Vista Home basic SP1), but its giving me the err:
1: Failed to install IsKernal Files. Make sure you have appropriate privileges on this machine..
How can I sort this problem? Plz. help.
Regards,
Kanak Sony
http://dodevelopnshare.wordpress.com/ | http://www.linkedin.com/profile/view?id=188131481&trk=tab_pro
Solved!
Go to Solution.

I got the solution for above, by disabling UAC in User Accounts. Rebooted the PC, and re-started the installation and it worked.
Regards,
Kanak Sony
http://dodevelopnshare.wordpress.com/ | http://www.linkedin.com/profile/view?id=188131481&trk=tab_pro

V8 Installer crashing - "1: Failed to install ISKernel Files" XP jibber-jabber ...

I've been trying to install the new line of Macromedia
products (version 8) after uninstalling my version 7. However, all
install files, after reading contents and extracting their cab
files are giving me the error:
"1: Failed to install ISKernel Files
Make sure you have appropriate privileges on this machine."
I get this logged in as Administrator or a regular user. I
have no problems with other programs. I can stil. run old
Macromedia installations fine (also InstallShield) with no issues.
I figured updating my InstallShield might help, so found the
handy Installshield Update guide here:
http://consumer.installshield.com/kb.asp?id=Q108322
However, right-clicking on my Macromedia v8 install files
gives me an installer version 4.0.100.1190 and no instructions are
provided in the above document for updating a version 4
InstallShield. I notice in my "C:\Program Files\Common
Files\InstallShield\Driver" directory the following subfolders: 7,
8, 9, 10, and 11.
I can't afford a fresh XP install over this, and that's
looking like my only other option (and a very ugly one at that) for
resolving it. I really just hope someone may know what is going on
and will be kind enough to spare a minute or two to help out.
Thanks,
Mike

I've been trying to install the new line of Macromedia
products (version 8) after uninstalling my version 7. However, all
install files, after reading contents and extracting their cab
files are giving me the error:
"1: Failed to install ISKernel Files
Make sure you have appropriate privileges on this machine."
I get this logged in as Administrator or a regular user. I
have no problems with other programs. I can stil. run old
Macromedia installations fine (also InstallShield) with no issues.
I figured updating my InstallShield might help, so found the
handy Installshield Update guide here:
http://consumer.installshield.com/kb.asp?id=Q108322
However, right-clicking on my Macromedia v8 install files
gives me an installer version 4.0.100.1190 and no instructions are
provided in the above document for updating a version 4
InstallShield. I notice in my "C:\Program Files\Common
Files\InstallShield\Driver" directory the following subfolders: 7,
8, 9, 10, and 11.
I can't afford a fresh XP install over this, and that's
looking like my only other option (and a very ugly one at that) for
resolving it. I really just hope someone may know what is going on
and will be kind enough to spare a minute or two to help out.
Thanks,
Mike

GRUB unable to find file, fails to install

(FTP install via floppies, GRUB 0.96-1, installation via arch/setup utility)
GRUB fails to install, giving the error message "Error: unable to find file" after checking for a file in /boot/grub (grub.menu IIRC), and quitting without further action. Menu.1st is there, but GRUB seems to want something else.

There might be an issue relative to the used fs. I allways had problems if I tried to install grub into xfs or jfs partitions, and had to install lilo first during installation procedure. After first boot, I usually removed lilo and installed grub without any problems.

Batch file application fails to install

We have an SCCM application which fails to install.
It is packaged as a batch file which tuns an installshield exe install then a VBS script to remove unwanted shortcuts. The SCCM application fails with error code 1628 but running the batch file from the ccmcache as administrator it works as intended.
I think the Exe installs InstallShield first and then the application. It looks as though the application install doesn't run with sufficient privileges.
"%~dp0Salud_1.20.0.15.exe" /z"/q /TSQL /SSALUDTESTDBITS /DSALUD_TEST"
"%~dp0deletedesktopshortcut.vbs"
Any clues appreciated.

Also, if you want to do this with a script, why don't you wrap the "Salud_1.20.0.15.exe" /z"/q /TSQL /SSALUDTESTDBITS /DSALUD_TEST" command to a single .vbs script that also includes the "deletedesktopshortcut.vbs" ? Doing stuff
in .bat and calling stuff is just bad... Way more cleaner to handle it all in a single script.
Sample for the first part:
strCommand = "Salud_1.20.0.15.exe /z/q /TSQL /SSALUDTESTDBITS /DSALUD_TEST"
set WshShell = CreateObject ("Wscript.Shell")
set objExec = WshShell.Exec(strCommand)
Do While objExec.Status = 0
Wscript.Sleep 100
Loop
Set WshShell = Nothing
Also note that the above handles only the running of your salud... -file, some additional debugging/logging would be good to add.
For the application just configure the install command: "cscript.exe yourcustomname.vbs" and the detection method you have to figure out by yourself.

Flash install fails hdutil: attach failed no mountable file systems

I've tried all suggested trouble tips to install the latest Flash 11. Dowload completes but install fails with:
hdutil: attach failed - no mountable file systems.
I have unistalled all prior flash files. Flash works OK in Chrome (it is built in and does not require a plug-in) but can't install using either Safari or Firefox. Same result in each case.

Adobe Flash Player Troubleshooting
Adobe Flash Player Troubleshooting (2)

PCM files for HP Universal Printing PCL 5 fail to install

PCM files fail to install at Printer Properties \ Device Settings \ External Fonts \ Properties.
PCM files are found, font names are displayed, fonts move to "Installed Fonts" box,
but there are no error messages when I click OK.
When returning to External Fonts \ Properties, no fonts have been installed.
Looking for docs on required PCM file format, too.
TIA, Pete

I work for Troygroup. Pete's question has a very simple answer. If this is Windows 7, disable UAC. You can re-enable UAC once the PCM files are installed.
If this is Windows 8, it is a bit trickier. In addition to UAC you must also click on an administration button (with the shield icon) from within the driver. I usually click the one under the sharing tab in the driver, however this requires printer sharing to be turned off in order to see this button.
If you run into this problem on Windows 8 and have trouble send me an email: [email protected]
The best way to install Troys fonts as of 2014 is to use the MICR Printer Installer that we put together. It disables UAC, installs a printer and the PCM files. You can get this from the Troygroup website.

10.6.2 failed to install due to 'nfs error', audio no longer works

macbook pro, all other updates have installed just fine, except for 10.6.2
I get this in the log:
11/10/09 3:58:15 PM com.apple.kextcache410 Created mkext archive //System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.
11/10/09 3:58:15 PM com.apple.kextcache403 Failed to mount helper partition: error 0XF8DA000C (DA err# 0x0c).
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 4)
11/10/09 3:58:15 PM com.apple.kextcache403 /: trouble updating one or more helper partitions.
11/10/09 3:58:15 PM com.apple.kextd10 async child pid 403 exited with status 70
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 5)
11/10/09 3:58:15 PM installd376 PackageKit: Install Failed: (null)
Error Domain=PKInstallErrorDomain Code=121 UserInfo=0x104d22740 "An error occurred while updating system extension information." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=70 "The operation couldn’t be completed. Stale NFS file handle") {
NSLocalizedDescription = "An error occurred while updating system extension information.";
NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=70 \"The operation couldn\U2019t be completed. Stale NFS file handle\"";
arguments = (
"-update-volume",
nothing is mounted (i rebooted before applying). not sure why it's giving that NFS error. it's consistent tho.. if i reboot and try the manual install of the patch, I get the same error.
after the failed patch "installed" it left my sound not working... so far everything else appears to work. any thoughts on fixing this are appreciated. i ran diskutil and 'fixed perms' and 'verified disk' ... patch still fails.

Try reinstalling the patch. If you get all the way through the installation, then see if your sound works. If not, then I suggest you do a repair install of Sno by installing Sno over Sno as in an upgrade install. Such an install, while usually very safe, still is an install so be appropriated backed up if you proceed.

Failed to install 1 file

Similar Messages

Maybe you are looking for