Failed to install the patch 113886-38, 113887-38

Hi all,
I just tried to install the J2SE Solaris 9 Recommented Patch Cluster, while, when it come to install the patch 113886-38, 113887-38, it got an an error message:
Installing 113886-38...
Checking installed patches...
One or more patch packages included in
113886-38 are not installed on this system.
Patchadd is terminating.
Installing 113887-38...
Checking installed patches...
ERROR: This patch requires patch 113886-38
which has not been applied to the system.
Patchadd is terminating.
The O/S version info:
SunOS rtd5p02 5.9 Generic_118558-27 sun4u sparc SUNW,Sun-Fire-880
Our system was just upgraded from solaris 8 to solaris 9, and I donnt know why it was failed, appreciate if any idea about the cause.
Yukun

Hello Yukun,
The reason that patch 113887-38 is failing to install
is that patch 113886-38 has not been installed. As
this is a dependancy patch of 113887-38, this patch
will not install.
Please can you run the following commands and return
the output generated:
showrev -p | grep 113886-38
find . -name 113886-38
patchadd /patch_to_patch/113886-38
Regards,
Yup, my problem is the patch 113886-38 was failed to install.
The error message is:
================================
Installing 113886-38...
Checking installed patches...
One or more patch packages included in
113886-38 are not installed on this system.
Patchadd is terminating.
=================================

Similar Messages

Failed to install a patch. 120445-01

I just started using "smpatch". Very cool. However, I have a single patch that keeps on popping up which won't install under any circumstance. Is there any way to disable this patch or get it to install?
I'm installing on a V440 with Solaris 9. Here's the error I'm getting:
Aug 9 21:56:12 boffo root: => Thread[Thread-18,5,main] <=Problem installing patches: Received a Manipulable event.
Aug 9 21:56:13 boffo root: => com.sun.patchpro.util.PatchBundleInstaller@a6997 <=Failed to install a patch. 120445-01
Aug 9 21:56:13 boffo patchadd utility failed. Reason code :0
Aug 9 21:56:13 boffo Checking installed patches...One or more patch packages included in 120445-01 are not installed on this system.Patchadd is terminating.
Aug 9 21:56:13 boffo root: [ID 702911 user.alert] => com.sun.patchpro.util.PatchBundleInstaller@a6997 <=Failed to install a patch. 120445-01
Aug 9 21:56:13 boffo patchadd utility failed. Reason code :0
Aug 9 21:56:13 boffo Checking installed patches...One or more patch packages included in 120445-01 are not installed on this system.Patchadd is terminating.
Aug 9 21:56:13 boffo root: => Thread[Thread-18,5,main] <=Problem installing patches: ALERT: Failed to install the patch {0}. 120445-01
ALERT: Failed to install the patch {0}. 120445-01

These are the only packages that don't start with "SUNW":
system      IPLTadcon                        Administration Server Console
system      IPLTadman                        Administration Server Documentation
system      IPLTadmin                        Administration Server
system      IPLTcons                         Console Client Base
system      IPLTdscon                        Directory Server Console
system      IPLTdsman                        Directory Server Documentation
system      IPLTdsr                          Directory Server (root)
system      IPLTdsu                          Directory Server (usr)
system      IPLTjss                          Network Security Services for Java
system      IPLTnls                          Nationalization Languages and Localization Support
system      IPLTnspr                         Portable Runtime Interface
system      IPLTnss                          Network Security Services
system      IPLTpldap                        PerLDAP
application NSCPcom                          Netscape Communicator

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Failed to Install the Crystal Reports 2008

Post Author: cechow
CA Forum: Crystal Reports
Hi,
I am facing some error message when installing the Crystal Reports 2008 that I have purchased. I am currently working on a Windows XP Pro SP2, 1 GB RAM, 60 GD Free Space to install the Crystal Reports but failed. The error stated on the Crystal Reports installation screen is "Crystal Reports 2008 Setup has Failed".
Thanks.
Adrian

Post Author: cechow
CA Forum: Crystal Reports
Basic Template
Product: Crystal Report 2008
Version:
Patches Applied: I'm not sure what patches need to be installed
Operating System(s): Windows XP Professional SP2
Database(s): SQL Server 2000 sp3a
Error Messages: Failed to INstall the Crystal Reports 2008.Steps to Reproduce: When I entered the CR disc in the CD ROM, there was no auto-run, then i decided to browse into the CD and execute the Setup.exe which then prompt the error above. Please advise.Is there some Pre-requisites that I need to install, any JRE or some other application?

Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

My computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?

Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W.

Error target not found base-level failed to install the packages

Im trying to install arch on my Virtualbox VM and its just returning:
error target not found base-level failed to install the packages to new root
What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.

Please read the following and follow the advice included:
https://bbs.archlinux.org/viewtopic.php?id=57855
With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command. If it was in your original command, that would explain your results.

TS4088 What happens if problems persist after I install the patch?

I've installed the software patch a few times and find that for a few days to a few weeks the intermittent loss of video seems fixed, and then it will come back with several blackouts in a short span of time, which prompts me to install the patch again...
Anyway, I'm wondering if there's a chance that upgrading my OS will fix it? Or is it just time to go to Genius bar and be w/o my machine for a while?

The information is here:
http://support.apple.com/kb/ts4088
Changing OS will not solve the issue. A genius bar appointment is the best option.
Ciao.

Failed to install the new preview build, please try again later. 0xC1900107

I'm trying to upgrade Windows 10 TP for Enterprise to the new build 8460, but I keep getting the error message
Failed to install the new preview build, please try again later. 0xC1900107
I don't find any reference to that error code. I've seen similar reports in the forum, but with different error codes and with the message "Failed to upgrade" rather than "Failed to install". I haven't played with the reg keys on this
system.
The event viewer shows the following event:
Installation Failure: Windows failed to install the following update with error 0xC1900107: fbl_release 9860 Enterprise.
The upgrade to a non-Enterprise device started at the same time went through without problems.
Alberto

Hi Russell,
What’s the situation now?
There would be a cause that the upgrade is running background, so a retry would fail in this situation.
You can check the action log in C:\$Windows.~BT\source\panther\setupact.log
Check the time line to see if it is running for upgrade.
Alex Zhao
TechNet Community Support

How to install the patch by the runInstaller's silent mode?

I manage the device by remote mode , and i do not use a Xwindow client.
But i need to install the patch using by silent mode , what should i do .
Thanks .

hi,
left upper corner on this forum.
there is a box that "says" Search
It is very easy to use, it is not necessary to be an Engineer.
apart of the notes, there is (at least) one EXACT query like yours:
[O patch apply procedure in Hp-ux and IBM aix|Re: O patch apply procedure in Hp-ux and IBM aix]

Failed to install the new preview build, please try again later. 0x80070032

Hello, I'm trying to update my Windows 10 to the new build and it's not possible in my computer.
In PC Settings\Preview Build I get this error as a result after trying to install the new update:
Failed to install the new preview build, please try again later. 0x80070032
EDIT: After trying the solution posted here: https://social.technet.microsoft.com/Forums/en-US/66f82aff-9411-4c5f-a34f-e3172df32925/preview-build-failed-to-download-0x80246018?forum=WinPreview2014Setup
Now I have different error 0x80240024

Hi,
Did you find the error during downloading or installing process? Have you cleared the SoftwareDistribution folder and check the issue again?
It would be better if you can check the event viewer and windowsupdate.log (%windir%\Windowsupdate.log), find related information, upload the log to OneDrive for further analysis.
http://windows.microsoft.com/en-hk/onedrive/share-file-folder
Yolanda Zhu
TechNet Community Support

Failed to install the new preview build, please try again later 0xC1900204

I upgraded in-place from Windows 8.1 to Build 9926. I am unable to upgrade past 9926.
Windows Update finds the new preview build on both fast and slow rings. It downloads it successfully. Upon attempting to install, it fails.
I get a screen overlay with the message:
Can't update to Windows 10 Technical Preview
Sorry, it looks like this PC can't run Windows 10 Technical Preview. This might be because the Users or Program Files folder is being redirected to another partition.
Closing the overlay and returning to the "Update & recovery" screen, I see the error in red: Failed to install the new preview build, please try again later 0xC1900204

Hi Isilverman,
As we have Windows 10 install Media available at hand, might we consider to do a dual boot of Windows 10 and Windows 8.1?
Based on the information you posted, it seems to be that the current Windows 8.1 environment is not suitable to do an Upgrade.
Another thing I would like to share is the information listed in the thread below:
Problems with disk space and installation time in builds 10041
and 10049 of Windows 10 Technical Preview
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Failed to install the new preview build, please try again later. 0x80070003

I am currently running build 9841. When I try to install the new preview build I get the following error
Failed to install the new preview build, please try again later. 0x80070003
I have installed all updates and I am a full administrator of this machine. If someone could fix this I would be very happy.

Hi bgelbach,
Have you downloaded the 9879 build?
Before Windows setup runs, it would do some check on perquisites, one thing is space check.
When the new build is downloaded, it is located under C:\windows\software distribution\download
folder, which is about 2.7G. Make sure you have enough space for installation.
If everything goes well, it would extract files to C:\$WINDOWS.~BT folder.
Alex Zhao
TechNet Community Support

Failed to Install the Extension CC 2014

I have an extension that I have installed on hundreds of computers but have come across this error on a recent install and I can't figure out what's causing the issue.
"Failed to install the extension. Please make sure the Manifest.xml of this extension is valid and the Extension Manager recognizes at least one product which the extension supports."
The correct version of Extension Manager is installed and being used. I am at a loss to what is causing the issue, does anyone have any ideas.
Thanks,

I'm having the same problem here. The icons are not showed on the left bar in my extension manager CC. I've tried reinstall and the problem still the same. Does anybody know how to solve that?
How can I fix the manifest.xml file issue?
Here the screenshot.
Thanks for any help.

Failed to install the patch 113886-38, 113887-38

Similar Messages

Maybe you are looking for