Failed to install windows server 2012 in virtual machine hosted in window 8.1

I installed Hyper-V in windows 8.1, then when I tried to install windows server 2012 R2 or windows server 2008 R2 in virtual machine, I got the following error:
the following is my virtual machine setting:
is there anyone an help to resolve it? thank you very much.

Hi,
Good to hear that you have solved this issue. Thanks for sharing as it would be helpful to anyone who encounters similar issues.
Best regards,
Susie

Similar Messages

Backing up Windows Server 2012 R2 Virtual Machine

When I try to back my Windows Server 2012 R2 Virtual machine up to a NAS, using the Windows Server Utility I get the following errors:
There was a failure in preparing the backup image in one of the volumes in the backup set.
Detailed error: The process can not access the file because another process has locked a portion of the file.
When viewing the errors in Event viewer I get the following error:
The backup operation that started at '‎2014‎-‎03‎-‎12T10:23:08.681735200Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for
a solution, and then rerun the backup operation once the issue is resolved.
Any help will be appreciated.
Regards
Louis

Have a look, check whether the solution is working for you.
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/windows-8-backup-error-code-0x807800c5/0ec7fea0-bb4d-44d2-9381-c364ef2c1f6c
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

How to install windows server 2012 r2 without remove the current windows 8.1

how to install windows server 2012 r2 without remove the current windows 8.1

Use guide below to convert it to 'basic' disk, or install windows on another drive. The supported way is to delete all partitions and convert it to a basic disk.
https://technet.microsoft.com/en-us/library/cc755238.aspx
However, your windows 8.1 must be on another drive?, as windows cannot boot from a dynamic disk.
Best Regards,
Jesper Vindum, Denmark
Systems Administrator
Help the forum: Monitor(alert) your threads and vote helpful replies or mark them as answer, if it helps solving your problem.

ODBC Problems with SQL Server 2012 on Virtual Machine

I am having problem with my application after my IT department upgraded to SQL Server 2012 with error "ConngetDataToModify.vi:1"<ERR>Object 0x2222222 is not valid. I have 4 servers running the same executable without problem before the upgraded. However, after the upgrade 2 of these Server are having the problem with the ODBC connection. Here are my setup, the application was created using LabView8.5, we have 2 physical server box running Window Server 2003, 2 Virtual Machine on Windows Server 2008, and a Virtual Machine with SQL 2012 Server. The 2 physical server running the executable without a problem after the upgrade, but the 2 Virtual Server were unable to connects to the ODBC connection. Anyone have any idea why this is happening , it is the problem with compatibility between my application with Server 2008 and SQL 2012 Server, or is there a problem with both beings Virtual Servers? As I said, the 2 physical Server seem to be running without any problem with the upgrade.

My guess is that the problem is not specifically with LV. This should be relatively easy to check if you create a UDL file and double click it. This opens a Microsoft wizard which allows you to configure and test DB connections (the UDL file itself is basically just a text file which holds a connection string). If it doesn't work there, it won't work in LV.
As for what the actual problem is, a common culprit is the firewall, which is easy enough to check by disabling it. Another option is the surface area configuration of SQL Server, which will not allow network connections unless you tell it to.
It should probably also be noted that LV 8.5 is not officially supported on Windows Server. I'm assuming that's not the issue, but be aware of it.
Try to take over the world!

Is it legal to use Macintosh virtual machine hosted by Windows operating system? If yes, please suggest recommended hardware and license cost?

Is it legal to use Macintosh virtual machine hosted by Windows operating system? If yes, please suggest recommended hardware and license cost?

steve359 wrote:
I thought that at least some version of OSX could not be VM in Mavericks, but if you say it is allowed so be it.
There are some people who dispute the details of what "the software" means in the license. From my point of view, I have a license to run all of those versions each license explicity says I can use a VM. I don't think it is illegal or even unseemly. The only version restriction I know of that the new VM policy only applies to Lion or greater. 10.6 could only be run on a VM if you had the expensive server version. The licenses do explicity list the acceptable uses and that includes OS X Server, software development, and non-commercial use. They don't want people selling online access to OS X, that's all.
I do not VM Windows on my MBP because I have no need.
Me neither. I used to though. Funny how a Mac was the most critical tool in debugging web sites on various versions of IE
I don't even run OS X in a VM anyway. It does work but it is quite resource intensive. Maybe if I had one of those new Mac Pros...

MDT 2013 Roles and features failing to install for server 2012 r2

I am having issues trying to apply Server 2012r2 Roles and features via MDT 2013.
Below I have attached the log.
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[The task sequencer log is located at C:\Users\ADMINI~1\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole"
context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Roles will be installed.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Roles specified in Role:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ FileAndStorage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[RoleServices specified in RoleService:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ File-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Storage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Features specified in Feature:]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-Framework-Features]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-Framework-Core]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ NET-WCF-TCP-PortSharing45]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ InkAndHandwritingServices]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Media-Foundation]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ RDC]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ SNMP-Service]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ SNMP-WMI-Provider]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Telnet-Client]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ User-Interfaces-Infra]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Gui-Mgmt-Infra]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Desktop-Experience]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ Server-Gui-Shell]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShellRoot]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShell]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ PowerShell-V2]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSRoles.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSRoleServices.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[No items were specified in variable OptionalOSFeatures.]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ZTI Heartbeat: Processing roles (0% complete]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Property Parameters is now = -FeatureName FileAndStorage-Services]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Validating connection to \\WIN-7VSNJRF3PNO\DeploymentShare$\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64]LOG]!><time="10:45:23.000+000" date="08-25-2014" component="ZTIOSRole" context=""
type="1" thread="" file="ZTIOSRole">
<![LOG[Mapping server share: \\WIN-7VSNJRF3PNO\DeploymentShare$]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread="" file="ZTIOSRole">
<![LOG[Already connected to server WIN-7VSNJRF3PNO as that is where this script is running from.]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="1" thread=""
file="ZTIOSRole">
<![LOG[Copying source files locally from \\WIN-7VSNJRF3PNO\DeploymentShare$\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64\sources\sxs]LOG]!><time="10:45:24.000+000" date="08-25-2014" component="ZTIOSRole"
context="" type="1" thread="" file="ZTIOSRole">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIOSRole: Path not found (76)]LOG]!><time="10:45:27.000+000" date="08-25-2014" component="ZTIOSRole" context="" type="3" thread="" file="ZTIOSRole">

I have narrowed this issue down to .net 3.5 install.
I have boot, efi, sources, support, autorun, bootmgr, bootmgr.edi, and setup.
I have confirmed that the sxs folder is there.
I also just added WindowsSource=%DeployRoot%\Operating Systems\Windows Server 2012 R2 SERVERSTANDARDCORE x64\sources\sxs to my customsettings and updated the boot iso. I am still receiving the errors.
One last bit of information I am able to get to the deployment share with the sxs folder in it from the reference machine I am creating but when I manually try to install .net 3.5 from roles and features to the share it fails. But if I copy the files local
they work fine.
I seem to have permission issues with other subfolders also.
Thanks,
Anthony

Windows Server 2012 Pooled Virtual Desktop collection GetVMstate issue

I am trying to create a Pooled Desktop collection with my Powered off VM and it errors out The
virtual desktop must be in a stopped state: Could not identify the state of the virtual desktop. Ensure that the RD virtualisation host server is available on the network and the virtual desktop is shut down
In the debug logs it shows.
Component RdmsModel: GetVMstate for Vm Win7_BaseVM failed with error 16386
Component RDExceptionHandler: Could not identify the state of the virtual desktop. Ensure that the RD Virtualization Host server sunflower-1.HYPERQA.NUTANIX.COM is available on the network and that the virtual
desktop Win7VMSF is shut down.
Please help on resolving this GetVMState issue.

Hi Krishna,
Thank you for posting in Windows Server Forum.
When you are configuring RDVH initially, please see that you have meet prerequisites. Remember that you need these pre-requirements:
• Database based on SQL Server 2008 R2
• Static IP Address for all Broker
• Round Robin DNS
• All RD Broker must be members of AD Windows Group (es. RDCB Server Group)
• The group must be insert into SQL Server as sysadmin ONLY for the DB creation. After that DB will be created give the db_owner permission only for their DB
More information.
Windows Server 2012 R2: Unable Add New VDI Template
In addition, we need all RD Broker must have the same SQL Native Client as main SQL Server (es. SQL Server 2012 SP1). The Connection Broker server's computer account MUST be a member of the local administrators group on the Virtual Host (RDS Host) machine and
then reboot the server. Finally check the result.
Windows Server 2012 Virtual Desktop Template Issue
Hope it helps!
Thanks.
Dharmesh Solanki

DPM 2012 R2 - Windows Server 2012 R2 Hyper-v backup of Windows Server 2003 R2 - Non-retryable error 0x80070490

Hi,
I have a hyper-v host running Windows Server 2012 R2 Standard with Hyper-V on it, and on that host I got 5 virtual machines running and of those 5, 4 of those the DPM are able to backup but when DPM tries to backup a server running Windows Server 2003 R2
I get the following errors in the eventlog.
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18014
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' was cancelled. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18014</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>411</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 18012
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Checkpoint operation for 'SERVER01' failed. (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>18012</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>412</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4248" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
</VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 2013-11-28 10:46:58
Event ID: 10150
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: HYPERV05.domain.local
Description:
Could not create backup checkpoint for virtual machine 'SERVER01': Element not found. (0x80070490). (Virtual machine ID 5221623F-C80C-4B92-AD02-F545D118C859)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
<EventID>10150</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-11-28T09:46:58.365308800Z" />
<EventRecordID>413</EventRecordID>
<Correlation />
<Execution ProcessID="2116" ThreadID="4280" />
<Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
<Computer>HYPERV05.domain.local</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
<VmName>SERVER01</VmName>
<VmId>5221623F-C80C-4B92-AD02-F545D118C859</VmId>
<Parameter0>%%2147943568</Parameter0>
<Parameter1>0x80070490</Parameter1>
</VmlEventLog>
</UserData>
</Event>
What I have done to try to troubleshoot this issue is:
Reinstalled DPM - No sucess
Restarted the Hyper-v Host - No sucess
I'm at the point where I am out of ideas and google hasn't given me much.
/Joseph

i have the same error.
"vssadmin list writers" shows last error unknown for all writers
disk space is sufficient
ntbackup of systemdrive and systemstate runs fine.
i installed KB940349 which fixes some vss related issues but the problem is still there.
any ideas?
Thanks.
When you have vssadmin reporting unknown error the only way to reset the vsswriters (as I understand it please correct me if I'm wrong :) ) is to restart the machine. The Fellenator is correct, make use that the vsswriter is working correctly since this
is the main function DPM is using when taking backup. He's also right in saying that it's outside the scope! Create a new thread on your error, then you will get much better responce!
/Joseph

Server 2012 cluster - virtual machine live migration does not work

Hi,
We have a hyper-v cluster with two nodes running Windows Server 2012. All the configurations are identical.
When I try to make a Live migration from one node to the other I get an error message saying:
Live migration of 'Virtual Machine XXXXXX' failed.
I get no other error messages, not even in event viewer. This same happens with all of our virtual machines.
A normal Quick migration works just fine for all of the virtual machines, so network configuration should not be an issue.
The above error message does not provide much information.

Hi,
Please check whether your configuration meet live migration requirement:
Two (or more) servers running Hyper-V that:
Support hardware virtualization.
Yes they support virtualization.
Are using processors from the same manufacturer (for example, all AMD or all Intel).
Both Servers are identical and brand new Fujitsu-Siemens RX300S7 with the same kind of processor (Xeon E5-2620).
Belong to either the same Active Directory domain, or to domains that trust each other.
Both nodes are in the same domain.
Virtual machines must be configured to use virtual hard disks or virtual Fibre Channel disks (no physical disks).
All of the vitual machines have virtual hard disks.
Use of a private network is recommended for live migration network traffic.
Have tried this, but does not help.
Requirements for live migration in a cluster:
Windows Failover Clustering is enabled and configured.
Yes
Cluster Shared Volume (CSV) storage in the cluster is enabled.
Yes
Requirements for live migration using shared storage:
All files that comprise a virtual machine (for example, virtual hard disks, snapshots, and configuration) are stored on an SMB share. They are all on the same CSV
Permissions on the SMB share have been configured to grant access to the computer accounts of all servers running Hyper-V.
Requirements for live migration with no shared infrastructure:
No extra requirements exist.
Also please refer to this article to check whether you have finished all preparation works for live migration:
Virtual Machine Live Migration Overview
http://technet.microsoft.com/en-us/library/hh831435.aspx
Hyper-V: Using Live Migration with Cluster Shared Volumes in Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/dd446679(v=WS.10).aspx
Configure and Use Live Migration on Non-clustered Virtual Machines
http://technet.microsoft.com/en-us/library/jj134199.aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support
I have also read all of the technet articles but can't find anything that could help.

Windows Server 2012 won't stream to a Windows 7 computer

I have a windows 7 computer and I built a windows server using windows server 2012. I am using it mainly to store and stream movies. I have the media pack installed that would allow me to stream but when I try to steam it from the server to my laptop it
does not stream it just wants to download it. I am clicking on the file under media, and it pops up with a new window like it is about to play with the play in the middle of the screen then goes away and asks if I want to download it. I cant find an answer
out and was wondering if anyone knew what was going on. I also have a windows 8 laptop and it will stream to that just fine so I know I have the streaming set up but just dont know why it wont stream to my windows 7 computer. Any ideas?

This one might help.
http://windows.microsoft.com/en-us/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows Server 2012 - Direct Access clients and the Windows 8 firewall

Hi,
We're running a simple proof-of-concept for Server 2012 Direct Access, we have a single DA server behind a firewall using NAT. We have a number of client devices setup for DA and running Windows 8.
Our issue is that we can only get the Windows 8 direct access clients to connect (when outside the corporate network) and work with the windows firewall disabled (public network profile).
With the windows firewall disabled everything works exactly as expected. When outside the corporate network the client detects the network state (public network profile), connects via DA and all internal resources can be accessed successfully...fantastic.
Is there some specific guidance on manually configuring the windows 8 firewall for Direct Access ? We've tried the obvious TCP:443 with edge traversal enabled but without success.
Much of the information we have found relates to UAG rather than Windows 2012 DA.
Any assistance is appreciated.

Hi,
There isn’t any specific configuration on the firewall.
Just confirm that port 443 can be forwarded to DirectAccess server.
Of course, make sure you are using IPsec first.
Check the links:
STEP 6: Test DirectAccess Client Connectivity from Behind a NAT Device
http://technet.microsoft.com/en-us/library/hh831524.aspx#TeredoCLIENT1
DirectAccess for Windows Server 2012 Installation & Configuration Guide
http://syscomlab.blog.com/2012/09/directaccess-for-windows-server-2012-guide/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Update fails on Server 2012 R2 Virtual Machine

I have set up a virtual network with two virtual machines. The first VM is Server 2008 R2 and is set up as a domain controller. The second VM is Server 2012 R2, and has been joined to the domain. The DC (TestVM1) is also set up as a DNS server.
From TestVM2 (Server 2012 R2), I am able to log in using a domain login, and I am able to browse to a public website.
I was able to run Windows Updates from TestVM1, but when I attempt to run Windows Updates from TestVM2, it fails.
The Windows Update client shows "Error(s) found:" and "Code 8024402F".
Errors in WindowsUpdate.log include
2014-10-17 18:26:14:235 800 950 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send failed with hr = 80072ee7.
2014-10-17 18:26:26:238 800 950 Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-17 18:26:26:238 800 950 Misc WARNING: Send request failed, hr:0x80072ee7
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://v4.download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab>.
error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x8024402c
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CID failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Provider for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CCC failed. error 0x80072ef3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Country for error reporting, hr = 0X80072EF3
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: Failed to download cab file from
http://download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab with error 0x8024402c
2014-10-17 18:26:26:238 800 950 PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 34, Old Count = 60
2014-10-17 18:26:26:317 800 950 PT   + SyncUpdates round trips: 1
2014-10-17 18:26:26:317 800 950 PT WARNING: Sync of Updates: 0x8024402f
2014-10-17 18:26:26:317 800 950 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-17 18:26:26:317 800 950 Agent   * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-17 18:26:26:317 800 950 Agent   * WARNING: Exit code = 0x8024402F
This is blocking further work. Assistance would be greatly appreciated.

I am having the exact same issue. Fresh build of Server 2012 R2 from the Microsoft Volume Licensing ISO. I tried before and after joining to the domain. Same error every time. Firewall is turned off. No AV. We do have a cloud proxy service, but I bypassed
that as a test and got the same error message. I also tried to stop wuauserv and cleaning out the folder and starting it back up. No joy as well. This is a VM server running on ESXi 5.1.  Server 2008 servers dont seem to have
an issue. Server 2012 server don't seem to have an issue. Only this new Server 2012 R2 server. My logs are below:
2014-10-28 14:28:46:104 696 4a4 AU ########### AU: Uninitializing Automatic Updates ###########
2014-10-28 14:28:46:104 696 4a4 WuTask Uninit WU Task Manager
2014-10-28 14:28:46:198 696 4a4 Service *********
2014-10-28 14:28:46:198 696 4a4 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-10-28 14:28:46:198 696 4a4 Service *************
2014-10-28 14:29:24:198 696 5c8 Misc =========== Logging initialized (build: 7.9.9600.17092, tz: -0400) ===========
2014-10-28 14:29:24:198 696 5c8 Misc   = Process: C:\Windows\system32\svchost.exe
2014-10-28 14:29:24:198 696 5c8 Misc   = Module: c:\windows\system32\wuaueng.dll
2014-10-28 14:29:24:198 696 5c8 Service *************
2014-10-28 14:29:24:198 696 5c8 Service ** START ** Service: Service startup
2014-10-28 14:29:24:198 696 5c8 Service *********
2014-10-28 14:29:24:214 696 5c8 Agent   * WU client version 7.9.9600.17092
2014-10-28 14:29:24:214 696 5c8 Agent   * Base directory: C:\Windows\SoftwareDistribution
2014-10-28 14:29:24:214 696 5c8 Agent   * Access type: No proxy
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Agent   * Network state: Connected
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
2014-10-28 14:29:24:214 696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-10-28 14:29:24:510 696 5c8 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-10-28 14:29:24:542 696 5c8 DtaStor Data store successfully created
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing global settings cache ***********
2014-10-28 14:29:24:542 696 5c8 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2014-10-28 14:29:24:542 696 5c8 Agent   * WSUS server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent   * WSUS status server: <NULL>
2014-10-28 14:29:24:542 696 5c8 Agent   * Target group: (Unassigned Computers)
2014-10-28 14:29:24:542 696 5c8 Agent   * Windows Update access disabled: No
2014-10-28 14:29:24:542 696 5c8 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2014-10-28 14:29:24:542 696 5c8 WuTask WuTaskManager delay initialize completed successfully..
2014-10-28 14:29:24:542 696 5c8 Report WARNING: Failed to initialize event uploader for new server {9482F4B4-E343-43B6-B170-9A65BC822C77} with hr = 8024043d.
2014-10-28 14:29:24:542 696 5c8 Report CWERReporter::Init succeeded
2014-10-28 14:29:24:542 696 5c8 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-10-28 14:29:24:542 696 5c8 DnldMgr Download manager restoring 0 downloads
2014-10-28 14:29:24:557 696 5c8 AU ########### AU: Initializing Automatic Updates ###########
2014-10-28 14:29:24:557 696 5c8 AU AIR Mode is disabled
2014-10-28 14:29:24:557 696 5c8 AU   # AU disabled through User preference
2014-10-28 14:29:24:557 696 5c8 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
2014-10-28 14:29:24:557 696 5c8 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-10-28 14:29:24:557 696 5c8 AU AU finished delayed initialization
2014-10-28 14:29:24:557 696 234 DnldMgr Asking handlers to reconcile their sandboxes
2014-10-28 14:29:35:776 696 578 IdleTmr Incremented idle timer priority operation counter to 1
2014-10-28 14:29:37:307 696 52c AU Triggering AU detection through DetectNow API
2014-10-28 14:29:37:307 696 52c AU Triggering Online detection (interactive)
2014-10-28 14:29:37:323 696 5c8 AU #############
2014-10-28 14:29:37:323 696 5c8 AU ## START ## AU: Search for updates
2014-10-28 14:29:37:323 696 5c8 AU #########
2014-10-28 14:29:37:323 696 5c8 SLS Retrieving SLS response from server...
2014-10-28 14:29:37:323 696 5c8 SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Proxy List used: <172.25.7.9:80> Bypass List used : <(null)> Auth Schemes used : <None>
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: Send request failed, hr:0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092>.
error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2.
2014-10-28 14:29:58:339 696 5c8 SLS FATAL: GetResponse failed with hresult 0x80072ee2...
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
2014-10-28 14:29:58:339 696 5c8 Agent WARNING: Failed to obtain the authorization cab URL for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0
2014-10-28 14:29:58:339 696 5c8 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80072EE2
2014-10-28 14:29:58:339 696 5c8 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 7; does use network; is not at background priority
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented PDC RefCount for Network to 1
2014-10-28 14:29:58:339 696 5c8 IdleTmr Incremented idle timer priority operation counter to 2
2014-10-28 14:29:58:385 696 5c8 Report *********** Report: Initializing static reporting data ***********
2014-10-28 14:29:58:385 696 5c8 Report   * OS Version = 6.3.9600.0.0.196880
2014-10-28 14:29:58:385 696 5c8 Report   * OS Product Type = 0x00000007
2014-10-28 14:29:58:401 696 5c8 Report   * Computer Brand = VMware, Inc.
2014-10-28 14:29:58:401 696 5c8 Report   * Computer Model = VMware Virtual Platform
2014-10-28 14:29:58:401 696 5c8 Report   * Platform Role = 1
2014-10-28 14:29:58:401 696 5c8 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Revision = 6.00
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Release Date = 2013-08-16T00:00:00
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Sku Number unavailable.
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Vendor = Phoenix Technologies LTD
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Family unavailable.
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Major Release = 4
2014-10-28 14:29:58:401 696 5c8 Report   * Bios Minor Release = 6
2014-10-28 14:29:58:401 696 5c8 Report   * Locale ID = 1033
2014-10-28 14:29:58:401 696 5c8 Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:401 696 5c8 AU <<## SUBMITTED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:29:58:432 696 b0c Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *************
2014-10-28 14:29:58:432 696 b0c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:29:58:432 696 b0c Agent *********
2014-10-28 14:29:58:432 696 b0c Agent   * Online = Yes; Ignore download priority = No
2014-10-28 14:29:58:432 696 b0c Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-10-28 14:29:58:432 696 b0c Agent   * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2014-10-28 14:29:58:432 696 b0c Agent   * Search Scope = {Machine & All Users}
2014-10-28 14:29:58:432 696 b0c Agent   * Caller SID for Applicability: S-1-5-21-600452275-980750782-2124898778-9669
2014-10-28 14:29:58:432 696 b0c SLS Retrieving SLS response from server...
2014-10-28 14:29:58:432 696 b0c SLS Making request with URL
HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\sls.cab with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP3958.tmp with dwProvFlags 0x00000080:
2014-10-28 14:29:59:135 696 b0c Misc Microsoft signed: NA
2014-10-28 14:29:59:135 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
2014-10-28 14:29:59:135 696 b0c SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
2014-10-28 14:29:59:135 696 b0c Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
2014-10-28 14:29:59:135 696 b0c Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
2014-10-28 14:29:59:135 696 b0c Setup Checking for agent SelfUpdate
2014-10-28 14:29:59:135 696 b0c Setup Client version: Core: 7.9.9600.17092 Aux: 7.9.9600.17031
2014-10-28 14:29:59:135 696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "https://fe2.update.microsoft.com/v10/3/windowsupdate/selfupdate"
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2014-10-28 14:30:00:151 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:151 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:151 696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP3D51.tmp with dwProvFlags 0x00000080:
2014-10-28 14:30:00:167 696 b0c Misc Microsoft signed: NA
2014-10-28 14:30:00:167 696 b0c Misc Infrastructure signed: Yes
2014-10-28 14:30:00:167 696 b0c Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
2014-10-28 14:30:00:167 696 b0c Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-10-28 14:30:00:167 696 b0c Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-10-28 14:30:00:323 696 b0c PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-10-28 14:30:00:323 696 b0c PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2014-10-28 14:30:01:104 696 b0c PT WARNING: Cached cookie has expired or new PID is available
2014-10-28 14:30:01:104 696 b0c PT WARNING: PTWarn: Anonymous plug-in skipped for WU
2014-10-28 14:30:01:198 696 b0c Agent Reading cached app categories using lifetime 604800 seconds
2014-10-28 14:30:01:198 696 b0c Agent Read 1 cached app categories
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: Failed to validate cab file digest downloaded from
http://download.windowsupdate.com/d/msdownload/update/others/2013/09/9242543_a77d372b9c8b13c599a3daf4b321ea1903da9a72.cab with error 0x80091007
2014-10-28 14:30:40:917 696 b0c PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 57, Old Count = 60
2014-10-28 14:30:41:151 696 b0c PT   + SyncUpdates round trips: 14
2014-10-28 14:30:41:151 696 b0c PT WARNING: Sync of Updates: 0x8024402f
2014-10-28 14:30:41:151 696 b0c PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
2014-10-28 14:30:41:151 696 b0c Agent   * WARNING: Failed to synchronize, error = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent   * WARNING: Exit code = 0x8024402F
2014-10-28 14:30:41:151 696 b0c Agent *********
2014-10-28 14:30:41:151 696 b0c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdatesWuApp Id = 1]
2014-10-28 14:30:41:151 696 b0c Agent *************
2014-10-28 14:30:41:151 696 b0c Agent WARNING: WU client failed Searching for update with error 0x8024402f
2014-10-28 14:30:41:151 696 b0c IdleTmr WU operation (CSearchCall::Init ID 1, operation # 7) stopped; does use network; is not at background priority
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented PDC RefCount for Network to 0
2014-10-28 14:30:41:151 696 b0c IdleTmr Decremented idle timer priority operation counter to 1
2014-10-28 14:30:41:151 696 6fc AU >>## RESUMED ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU   # WARNING: Search callback failed, result = 0x8024402F
2014-10-28 14:30:41:151 696 6fc AU #########
2014-10-28 14:30:41:151 696 6fc AU ## END ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
2014-10-28 14:30:41:151 696 6fc AU #############
2014-10-28 14:30:41:151 696 6fc AU All AU searches complete.
2014-10-28 14:30:41:151 696 6fc AU   # WARNING: Failed to find updates with error code 8024402f
Derek
Systems Engineer
Derek Desktop Engineer

KB2919355 Fails to install on Server 2012 R2 with error 80071A2D

I have several Server 2012 R2 installs that I just cannot get KB2919355 installed on.
I have tried via WSUS and also manually and in all cases, the update takes a while says a reboot is a required then on the restart it rolls back as the update fails.
I have tried running sfc /scannow which reports no issues.
I have also tried running dism /online /cleanup-image /restorehealth which reports corruption was repaired, however in the Windows Setup log it says "System store corruption detection and repair has completed. Status : 0x0, Total instances of corruption
found : 0, total instances of corruption repaired : 0
I take this to mean these components are healthy.
I'd really appreciate a few suggestions here as I'm kind of at a brick wall now. I can't think of anything else to try.
Looking through the Application log, I have a number of Windows Error Reporting entries, most of which don't really say much but one does point to attached files including c:\windows\inf\setupapi.dev.log - the end of this log seemed to suggest that it was
a driver issue :
   inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 3100 Chipset PCI Express Port A - 35B6}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_35B6
     inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 3100 Chipset PCI Express Port A1 - 35B7}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_35B7
     inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 7300 Chipset PCI Express Port 1 - 3604}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_3604
     inf:      {Configure Driver: exit(0x00000000)}
     inf:      {Configure Driver: Intel(R) 7300 Chipset PCI Express Port 2 - 3605}
     inf:           Manufacturer = Intel
     inf:           Section Name = PCI_DRV
     inf:           Hardware Id = PCI\VEN_8086&DEV_3605
!!! inf:           Failed to create driver descriptor key 'PCI\VEN_8086&DEV_3605'. Error = 0x00001A2D
     inf:      {Configure Driver: exit(0x00001a2d)}
!!! sto:      Failed to reflect driver package. Error = 0x00001A2D
     sto: {Reflect Driver Package: exit(0x00001a2d)}
!!! sto: Failed to reflect all driver updates. Error = 0x00001A2D
<<< Section end 2014/05/13 22:24:00.475
<<< [Exit status: FAILURE(0x00001a2d)]
But I'm not really sure how to progress troubleshooting this.
Cheers
James

Hi
Just to confirm, AVG only needed to be "disabled until reboot" to install the KB. It was obviously preventing some file operations that were required during the initial install phase.
Thanks very much to Susan for her help with this.

Install R12 on a Virtual Machine hosted on Windows Vista

I wanted to install Oracle EBS R12.1.1 on Windows Vista Home Premium 64-bit but used to get .\jre\nt\1.6.0\bin\java error. Hussein Sawwan
helped and said that this is not certified. He adviced me to create a VMWare Server. Following is my experience. I hope it is helpful. Any
suggestions, additions are more than welcome. Thanks to all who helpmed me especially Hussein Sawwan, Helios, Gareth Roberts.
I used to get .\jre\nt\1.6.0\bin\java error after the installation would zoom through 33%. That was because my staging area was not correct. The staging area should be just next to c:\ or whatever be the root directory (or drive). No space or special characters in folder name. My current structure is as follows:
c:\r12stage. Under r12stage I have following folders and subfolders
oraAppDB -- 49 Disks
oraApps -- 11 Disks
oraAS -- 3 Disks (This comes from the Rapid Install Tools)
oraDB -- 5 Disks
startCD -- 1 Disk plus other folders. Just copy startcd from the unzipped download and paste to r12stage area.
I then created a virtual machine using VMWare Server (free download but need to register to get the serial number). Because I installed
vmware server on Vista Home Premium 64 bit Host OS, I have to boot my machine by pressing F8 and then select Disable Digital Signature
Enformcement. Thanks to Gareth Roberts for this tip. Create a vm and install Windows 2003 by selecting the .img file (first cd) by selecting Use ISO image and then path of the windows 2003 cd 1 (zipped file). start the virtual machine, that will install windows 2003 and then ask for location of 2nd cd. On the host machine, where the second win 2003 zip file resides, unzip the second zip file and name the folder as cd2. share this folder to the __vmware_user__ and from the virtual machine, map network drive to \\hostmachinename\cd2. Select this as the location of cd2 and complete the installation. Install MKS Toolkit from http://cygwin.com/ and visual c++ from Microsoft website. for information on this please refer to the following URL. Thanks to Muhammad Habib
http://mhabib.wordpress.com/2007/03/14/installing-oracle-applications-e-bussiness-11i-on-windows-xp/
After installation is done and Windows Update is run, share the r12stage directory on the host machine to the vmuser and launch rapidwiz.cmd from the command prompt and follow the instruction. For internet connection from the VM use Ethernet as NAT.
If the installation errors halfway through, clean up your VM by following instructions in document id 292424.1 in MetaLink. If you dont have access to Metalink then I summarize the steps briefly over here.
Launch the Registry Editor.
Navigate to the HKEY_LOCAL_MACHINE\Software key.
Select the Apache Group subkey and delete it.
Select the Oracle subkey and delete it.
Navigate to the HKEY_LOCAL_MACHINE\System\Current Control Set\Services.
Carefully select and delete each service beginning with Oracle. For example, delete "Oracle Apache Server PROD_<nodename>".
When you are finished, exit the Registry Editor.
Navigate to the Environment Variables editing screen according to your system setup. For example, right-click My Computer and select
Properties. From the Advanced tab, click the Environment Variables button.
Select the following system variables if created during the failed installation, and delete them: DISCO_JRE, DISCO_VBROKER, JSERV,
VBROKER_JAVAVM, VBROKER_TAG, WV_GATEWAY.
Select the Path variable, but do not delete it. Carefully edit it and remove any component with "Oracle" in the name, or that otherwise
references the failed install. For example, delete "E:\11.5.10\test\visora\8.0.6\bin;".
Save and exit System Properties.
Open a command window and navigate to the C:\Program Files\ directory. Delete the Oracle subdirectory.
If your Oracle Inventory directory was not C:\Program Files\Oracle\Inventory and was therefore not deleted in the previous step, locate it
and delete it.
Restart your machine
It is now safe to remove the Oracle filesystem that was partially installed during the failed installation. Go to the base install directory,
or top-level directory under which you installed either the Database Server (DATA, DB) or the Applications Tier Server (APPL, ORA, COMN)
directories, or both. Note that you may choose to rename a directory before you delete it. This allows you to use the same directory name and start a new installation even before you finish the delete filesystem operation. For example, if you placed your filesystem in a "test" directory under
"E:\11.5.10":
C:\> E:
E:\> cd 11.5.10
E:\> rename test oldtest
E:\> del /s /q oldtest
In another window:
C:\> cd <stage install directory>
Q:\> rapidwiz.cmd
After cleaning up if you still get error like RW-50004: Error Code received when running external process. Check log file for
details. Running database Install driver for VIS instance, after 13% complte step 1 of 5 then I suggest that you re-create the machine and follow the above steps again. Including installing win 2003, mks tool kit , vc++, etc. It will be a success.
Starting concurrent manager takes up enormous memory and slows down everything, so if you dont need it then dont ever start it. APPS password is apps and sysadmin user is sysadmin.
Good luck.
Mahesh Acharya

I had Vista 64-bit machine, installed Ubuntu in VMWare. Installed Oracle apps on 32-bit Ubuntu under VMware and was able to access Oracle apps. But, it is very very slow. It hangs sometimes and takes 15-20mins to display Ubuntu screens. Am I missing something here. I have a 4GB RAM and VMWare can not use all the 4GB. It may be using 2GB of 4GB. Am I missing something?

Windows server 2008 r2 virtual machine uses much less memory then it has assigned

Guys,
I had a virtual machine with windows 2008 r2 operating system, running sharepoint, on a server where it had 6gb RAM memory assigned.
Now I bought a new server, which has 32 gb of ram. I moved my virtual machine there, and assigned 24gb of RAM.
But after I started VM, in Windows Task Manager I see that system uses only about 6.5 GB of RAM assigned. That is not even close to 24gb, which it has available.
Is there any power shell script or anything else available to increase virtual machine memory usage?
Thank you.

Hi,
I found a KB similar described with your issue- the Hyper-V host cannot allocate more memory to the virtual machine because there is not enough free disk space to extend the
memory contents file, more detail symptoms please refer the following KB:
Dynamic Memory allocation in a Virtual Machine does not change although there is available memory on the host
http://support.microsoft.com/kb/2504962/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Failed to install windows server 2012 in virtual machine hosted in window 8.1

Similar Messages

Maybe you are looking for