Failed to issue print from win7 laptop to Canon MP230 which is connected to mac mini os x 10.8.3

HI
I have recently bought a Canon MP230 printer and connected to my Mac Mini 10.8.3 usb port.
To setup the printer I downloaded the latest driver from canon web site and install all of them
When I issue print from my mac mini it works fine.
Next step was to issue print from Windows 7 laptop .
To do that I intalled Bonjoure in my Windows 7 latpot and set the printer connected to MAc Mini as default printer.
Upto this point every thing works fine.
When I tried to issue print from my Windows 7 laptop the printer gets activated the power button start blinking . But it just pass a page from
input tray to out tary without printing a single line. I have looked into cups server page at my mac mini. It shows that the job fired from windows
laptop was done.
I treid a lot debug it myself . But no luck yet.
Please help me. I am very upset.
Thanks
Anirban

I just updated to 10.8.3 today, and my computer and Apple TV won't even recognize each other now. I have absolutely no advice, but wanted to throw this in so you (and Apple) know you're not the only one.

Similar Messages

Officejet Pro 8500A Premium will not print from my laptop

I have an Officejet Pro 8500A Premium. I jus had ot reload my driver thinking it would resolve the below issue but it did not. The connection string is laptop -> docking station -> ethernet to router -> ethernet to printer. On my laptop I can see the ink levels of the printer so there is a connection but when I attempt to print and select the Officejet 8500 (non fax) printer, it attempts to print to the 8500A fax and then pops up with a fax box.
Additional Information:
I have tried the following:
- Changed the port for the 8500A fax
- Tried to set the default printer from the fax to the network printer - received an error message: Operation could not be completed (error 0x0000709). Double check the printer name and make sure that the printer is connected to the network.
This question was solved.
View Solution.

Hello coolhandluke2,
Welcome to the HP Forums.
I see that you are having issues when attempting to print from your Laptop.
I also see that you are getting an error 0x0000709.
I do have a few suggestions we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I am also going to give you a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error Me....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

5512 all in one wireless; unable to find printer from my laptop

Last week we had to replace our wireless modem. Yesterday was the first day we needed to print something. The printer was showing it was "offline" on my laptop and my son's laptop. It hadn't been connected to the new modem, so I did that. It shows a wireless connection and good signal strength. After that our laptops still showed it was offline. Another laptop doesn't show the printer is offline but we get an "unable to print" error message. I decided I would uninstall the printer from my laptop and then reinstall it (I'd had this issue before and this worked) but now it says there's no printer found when trying to add it back. Any ideas???

Hello LLHRN07,
Welcome to the HP Forums.
I see that you are having an issue when it comes to connecting the printer to the new wireless router.
I suggest that you try to run the Wireless setup Wizard from the printer. To do so, please go to the front panel on the printer, use the right arrow and go to the SetUp Menu. Use the right arrow again and select the Wireless Menu. From here, go to the Wireless SetUp Wizard and follow the prompts to connect to the new router.
If you have any issues, or any other questions, please feel free to write me back.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

[SOLVED] Apps freeze when i try to wirelessly print from this laptop

I have an HP Zv6000 running arch that is about 2 1/2 years old, and I have shared the printer on my main desktop so that the laptop can print wirelessly (the desktop also runs arch). The problem is, when I try to print from the laptop, Openoffice stops responding. This also happens on certain other dialogs, especially when I am trying to change stuff in the Options dialog. I am also unable to print from other applications. I really don't know what the problem is here. I have the printer's driver installed on the laptop and the usblp module loaded.
Last edited by kclive18 (2008-06-24 11:02:56)

Sorry for the double-posting, but I uninstalled and installed CUPS on both client and server, and followed the Linux to Linux printer sharing configuration posted on the arch wiki. This laptop still freezes whenever I try to print anything except for a test page from the CUPS web interface. So it must be config-related and the problem HAS to be on my laptop, since my server can print just fine. Does anyone know what the problem is? I've been trying for hours and nothing's wanting to work for me.
EDIT: I tried running soffice from the terminal and I looked for any output. This is what I got:
[ken@myhost ~]$ soffice
libGL error: open DRM failed (Operation not permitted)
libGL error: reverting to (slow) indirect rendering
Nothing really related to printing here. Also, running gedit from terminal gave me no output whatsoever when it froze. Weird...:|
Last edited by kclive18 (2008-05-29 16:13:15)

I am trying to get my D1560 to print from my laptop.

I was trying to get my D1560 to print from my laptop. On advice from the HP website, I uninstalled the printer, and downloaded the latest driver software. But when I extract the file (either the downloaded file or from the CD), nothing happens. The file extraction reaches 100%, then nothing. No error messages, no directions on what to do next, not even a kiss goodbye.
How can I get the printer installed, and then print from a networked computer that is not directly attached to the print device?
I've taken two steps back. At least before, Windows (7, 64-bit, by the way) would recognize the printer, even though I couldn't print to the D1560.
The print device is attached to my HP Slimline desktop. Does the Slimline have to be awake in order to print from my laptop?
Also, I downloaded the HPPDU software, (before I uninstalled the printer) but since it can't find the printer, it can't solve the problem. That IS the problem - the computer can't find the printer.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
 Cheers, Tom

Printing from wireless laptop to ethernet connected Officejet pro 8500 A909a

I have an officejet pro 8500 A900a and a Linksys WRT54G router and I've been having difficulty printing from my laptop via WiFi. I used to be able to print regularly and I think HP sent me an update to some software that has since stopped that from happening. I have the IP and mask for the printer set manually asto never change and set the default gateway to the correct setting for my router. I can ping the device and I can access the printer admin pages from my laptop using the ip address. I can even print reports and run diagnostics from the HTTP connection but no printing from Word or ANY other source. The printer does print from another desktop that has a USB connection to the printer but the connection is not always plugged in. What do I do?
cheers

I'm betting you just need to open up the ports in the firewall. I'll list them below.
HP printer ports
UDP
TCP
Acronym
Definition
Used for
137
137
NetBIOS
network Basic Input/Output System - (basic communication)
UDP: Printing, Photo Card Upload
138
NetBIOS
network Basic Input/Output System - (basic communication)
UDP: Photo Card Upload
139
NetBIOS
network Basic Input/Output System - (basic communication)
TCP: PhotoCard Upload
161
SNMP
Simple Network Management Protocol - Monitering network attached devices
UDP: Printing
427
427
SLP
Service Location Protocol (finding out what things can do on the network)
UDP: Printing, Photo Card Upload, Scanning, Faxing, Installation
9100
PDL
page description language - printer control language (how does the page you want printed look)
TCP: Printing
9220
TCP: Scanning, Faxing
9500
TCP: Scanning
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

My c5180 no longer prints from my laptop. an error message comes up with ink system failure

My printer still prints but it will not print from my laptop. We've checked all the connections, replaced all the ink because it said that ink had expired. An error message comes up ink system failure.

Try the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Peachtree Classic 12 Issues printing from PDQ

This is a long-shot but I am looking to see if anyone has any knowledge of Peachtree Classic 12. We have a user that does accounting through Peachtree Classic 12 which resides on a Windows 2000 VM running on VMWare Workstation 11. Every so often she has issues printing from the PDQ module it where it will either not print at all or print in a way that data doesn't fit on the page and gets cut off. Usually we can get it to print again by messing with port settings, power cycling the printer, etc. but what I am stuck on right now is getting it to fit all the data on one page. There is something in the PDQ Printer setup about compression codes and setup codes but I am not sure where to find the correct codes that will compress the data output so that it fits on one page. Any help would be appreciated.
This topic first appeared in the Spiceworks Community

I had a similar issue. Are the fonts on the pages the same or do they differ?
My issue was a font, check that.

How can I print from my iPad air? We have wifi and can print from our laptop.

How can I print from my iPad air? We can print from our laptop.

Setup AirPrint Printer
1. Buy an AirPrint enabled printer; see list below
http://support.apple.com/kb/ht4356
2. Run the CD provided and set printer and iPad on the same network
3. Start printing from your iPad using AirPrint

I can't print from macintosh laptop unless I print first from my desktop. officejet 6500a

i have a macintosh laptop. I can't print from it unless I print first from my desktop. officejet 6500a.
it says: "communication failure. the computer is no longer able to communicate with the printer."
Yet, once I print something from my desktop, I can print from the laptop just fine, until I turn one of the machines off...

Is the printer connected to your wireless router? What router? What version of OS X?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
(118441)

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

Can't print from windows to shared Canon MX340

I have a new Canon MX340 on my iMac with Snow Leopard. I'm able to print from this iMac and via sharing, all of the other Macs at home. What I can't do is print from my son's Windows XP netbook. Previously, I was sharing an old HP office jet with no problem, with the new Canon one of two things happens. I used Bonjour to install the printer on the XP side.
- with Generic Postscript selected as the driver I get the following erros in the cups error_log file
E [29/Aug/2010:17:08:37 -0600] [Job 920] No %%Pages: comment in header!
E [29/Aug/2010:17:08:37 -0600] [Job 920] Unable to open raster stream - : No such file or directory
E [29/Aug/2010:17:08:37 -0600] [Job 920] No pages found!
E [29/Aug/2010:17:08:37 -0600] [Job 920] Job stopped due to filter errors; please consult the error_log file for details.
- using the MX340 driver, I simply get a single blank page
I am able to print via a network connection (the MX340 has built in WiFi), but I'd like to know how to do with via the old method.
Any ideas?
THANKS!

The XP Netbook should use the Generic PS driver. I've never found the Canon driver on Windows to work correctly when printing to the Mac shared printer via Bonjour for Windows.
It is unusual you are getting this error. The Mac should be converting the incoming spool file to suit the MX340. Since the Generic PS is not working then you could try the Apple Color LaserWriter 12/600 when using the Bonjour Wizard. I've used this on XP to print to my MP980 shared off 10.6.4 and it worked fine for me.
Personally I would suggest you are better off with using the MX340 wireless. This will remove the reliance on the iMac being available just so that others can print.

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
Using 2 displays, connected via HDMI and thunderbolt
Been on to support a number of times now - is anyone experiencing the same issues?

BUMP.
I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
kernel[0]: Previous Shutdown Cause: -128
I don't know if that's related or not, but maybe helps?

How do I print from my iPad to canon pixma 250 printer?

Hi, How do I print from my iPad to canon pixma mp250 printer? Is it possible please?

The HP 6500 is not an AirPrint enabled printer.
http://support.apple.com/kb/HT4356

Failed to issue print from win7 laptop to Canon MP230 which is connected to mac mini os x 10.8.3

Similar Messages

Maybe you are looking for