Failed to load an application resource (Internal Error)

Hi,
Running Leopard MAC OS/X 10.5.6 and Adobe Reader 9.1.0. Is anybody going to fix this problem???? Which happens when you try to run Preferences. I won't even mention the fact that I cannot print either. Ooops, I just mentioned it...
Thanks.
Susan

The same problem occurs for me.
The error Failed to load an application resource (internal error) appears when viewing preferences inside the application.
Like wise, when printing a similar error message is shown.
I have uninstalled the application, all adobe products on the system, removed application support files, preferences, PDF preferences and reinstalled. The problem still exists.
I installed the same version (v9.1.0) on another mac that had never had Acrobat installed before and the problem does not exist. I am able to view preferences and print.
Both are intel based Macs running 10.5.6.
Given that it works on one mac and not the other, what would be causing this?
Also is there an uninstall tool for Adobe Acrobat Mac from Adobe?

Similar Messages

Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Failed to load an application resource (internal error) - error message when previewing pdf in program

Hi,
I keep getting this error message when trying to Preview PDF in program "Failed to load an application resource (internal error)". I haven't changed anything in LiveCycle, so not sure why this is happening. Have had this issue for the past few months. I've been working around it, but it's kind of a pain. Would prefer to view forms in program. Suggestions to fix this?
Thank you!
Stacy

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Failed to load an application resource (internal error) win XP

I am
trying to correct the problem of not being able to open .pdf files from internet websites.
This is the error that I get when I go to edit
- preferences in adobe reader. Anyone have any advise? Greatly appreciated. Windows XP

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

There was an error during initialization. Failed to load an application resource (internal error).

I get this error 4 times when I open reader and can;t repair or uninstall it 11.0.06 (Mircrosoft windows search filter host needs to be closed).
Windows 7

I haven't installed any third-party plugins. However, looking at the list of plugins, I see that there are two copies of ECMAScript: EScript.api dated 12/18/12, and EScript_AVG_RESTORED.api dated 1/21/13. So my bet is this is a side-effect of my anti-virus blocking the JavaScript security hole that was fixed by Java 7 Update 11. I deleted escript*.* from C:\Program Files (x86)\Adobe and the errors have gone away.

Reader 10.1 "Failed to load an application resource"

Hi
I upgraded from Reader X (10) to 10.1. Since then every time I start it, whether as a standalone or plug-in, I get one or more instances of an error message which says "There was an error during initialization. Failed to load an application resource (internal error)." I also note that there is no plug-ins menu.
This is getting annoying, to say the least. I am running Windows Vista SP2. Googling produced nothing relevant.
Does anyone have any ideas?
Thanks
Luke

Thanks.
Both. In Vista Add/Remove Programs gives a "Change" rather than a repair option but it runs the repair either way, says everything is ok, but it isn't.
Screenshots below
Luke

AR can't be added-Error "Failed to load from XML resource"

Hi Everyone,
I need help with this error. When entering an item and then tabbing in an AR document, this code appears.
"Failed to load from XML resouce".
Thanks,\
Debbie

Hello experts,
I am facing this issue in SBO 9.0 PL 08.
Using SBOdemoUS, clic 'Duplicate' an existing Sales Order, then select a Business Partner, and hit 'yes' to the question in order to refresh rows with new BP info. You will get red bar error 'Failed to load from XML resource - (UI_API 7004) [Message 66000-6]' and it wipes out all the copied rows info. Does not happen with BPs that don't have default Ship To info.
Your advise please.
Thanks

"Quicktime Streaming failed to load because of an unknown error"

iTunes and Quicktime will not load, install, or uninstall because of at some point the popup message "Quicktime Streaming failed to load because of an unknown error" appears. Succesive reboots and removal of SpyBot (which may have denied access to Quicktime because of a registry setting, which of course may still be the cause of the problem...) have not fixed the problem. Any ideas?

I have struggled with the same problem for the last few years and could not find any adequate answers. Being a person who likes to run his PC clean and mean, I had stopped all those Apple Itunes / Quicktime applets and deleted Itunes application as I preferred other Media players & converters. Recently my Nokia 6300 phone suite would send me the same error every song I moved from PC to phone. The clue was that I had chosen Optimised AAC format instead of stock standard MP3. Working on this hunch, I re-activated Apple's Software Update from the Scheduled Tasks items of Control Panel to update Quicktime, Itunes and Safari. Now I have AppleMobileDeviceService.exe, iPodService.exe, iTunesHelper.exe all running and I do not get the error anymore. There is also the Bonjour (DNSResponder.exe) service to be considered. See:-
http://www.tombraiderforums.com/showthread.php?t=122420
http://digg.com/apple/iTunes5Disasters

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

The workflow failed to start due to an internal error

My approval workflow never work in my machine before. It was a newly installed machine. when i start the Approval workflow, it stated "The workflow failed to start due to an internal error'. What other circumtances might lead to this problems?or you can email me @ [email protected]

hi
Finally it worked for me after reinstalling the features on the site collection. deactivating and reactivating didnt help. once i uninstalled and re installed them it worked.
Here are the steps i performed.
OffWFCommon
stsadm -o deactivatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
stsadm -o uninstallfeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -force
ExpirationWorkflow
stsadm -o deactivatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
stsadm -o uninstallfeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -force
ReviewWorkflows
stsadm -o deactivatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
stsadm -o uninstallfeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -force
SignaturesWorkflow
stsadm -o deactivatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
stsadm -o uninstallfeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -force
translationWorkflow
stsadm -o deactivatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force
stsadm -o uninstallfeature -id C6561405-EA03-40A9-A57F-F25472942A22 -force
install & activate
OffWFCommon
stsadm -o installfeature -name offwfcommon -force
stsadm -o activatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
ExpirationWorkflow
stsadm -o installfeature -name Expirationworkflow -force
stsadm -o activatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
ReviewWorkflows
stsadm -o installfeature -name ReviewWorkflows -force
stsadm -o activatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
SignaturesWorkflow
stsadm -o installfeature -name SignaturesWorkflow -force
stsadm -o activatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
TranslationWorkflow
stsadm -o installfeature -name Translationworkflow -force
stsadm -o activatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force

I purchased book, it shows downloaded but when I open it says " failed to load because requested resource is missing"

I purchased a book in I books and it's shows downloaded but when I go to open it reads " failed to load because requested resource is missing". how do I retrieve my book?

Hello Mike,
I am sure you are eager to read the new book you purchased. I have a few suggestions to download and open your book.
First, I recommend deleting the book from iBooks and downloading it from your list of past purchases using the steps in the following article:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If the book still does not download or open, you can report an issue with this purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best,
Sheila M.

I have purchased a book it appears in library but says failed to load book as resource is missing how do I resolve this????

I have purchased a book it appears in library but says failed to load book as resource is missing how do I resolve this????

Try deleting the book from the bookshelf in the iBooks app and then redownload it (assuming that it's still in your country's store) via the Puchased tab in the ibookstore in the app and see if you can then open it

OVM 3 manager Console doesnt load.. OVMAPI_6000E Internal Error

I had deployed OVM manager 3 in my environment.
I have a bunch of VMs running on the 2 OVS Servers which are managed by my OVM Manager 3 .
I was having some issues with Restarting VMs., and hence restarted the OVM Manager..
Now My Manager console wont come up for some reason.
when i type http://10.0.0.149:7001/ovm/console/ in the console, if would give me a 404 page not found error.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
i logged into the Manager from command line and saw the Adminserver process running
racle 5008 4959 2 11:49 ? 00:00:44 /u01/app/oracle/java/bin/java -server -Xms512m -Xmx2048m -XX:MaxPermSize=384m -Dweblogic.Name=AdminServer -Djava.security.policy=/u01/app/oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Djava.awt.headless=true -Xdebug -Xrunjdwp:transport=dt_socket,address=127.0.0.1:8453,server=y,suspend=n -da:org.apache.myfaces.trinidad -da -Dplatform.home=/u01/app/oracle/Middleware/wlserver_10.3 -Dwls.home=/u01/app/oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/u01/app/oracle/Middleware/wlserver_10.3/server -Dcommon.components.home=/u01/app/oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Ddomain.home=/u01/app/oracle/ovm-manager-3/machine1/base_adf_domain -Djrockit.optfile=/u01/app/oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/config/fmwconfig/carml -Digf.arisidstack.home=/u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/u01/app/oracle/ovm-manager-3/machine1/base_adf_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/u01/app/oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/u01/app/oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/app/oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/u01/app/oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
oracle 5363 5147 0 12:23 pts/0 00:00:00 grep java
Not sure what went wrong.. Kindly help.. urgent.. Thanks/
Edited by: 922610 on 21-Mar-2012 20:07

looking at other forum posts, i did a service ovmm stop / start
Now it could load the Console, but will fail at login and gives me the foll message..
Unexpected error during login (com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_6000E Internal Error: Connection refused Connection refused Thu Mar 22 14:08:21 EST 2012), please consult logs for details.
not sure what this is now...PL help..

HT5557 message failed to load because requested resource is missing.

Cant redeem on I tunes no purchased books on I books Message failed to load because resource is missing.

Hi vbCoach1!
If these items were purchased from the iTunes Store, then you can find an article about re-downloading past purchases right here:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

"Failed to load Main-Class manifest attribute" error message !

Hello
I am trying to download a library to use with my applets.
(objectdraw.jar)
After I download it, I try to open it ( double click on it) and it says
"Failed to load Main-Class manifest attribute from
C:\2_jbproject\objectdraw.jar
I need to open it in order to use it with my applets .
What do I need to do ?
Thank you in advance

cannot find symbol constructor
Sun(objectdraw.DrawingCanvas)Isn't Sun your class? If so (unless BlueJs error messages are confusing) it sounds like your Sun class does not have a constructor with the signature you are using.
I'm not familiar with BlueJ, but hopefully it ignores the classpath environment variable (though your error message lead me to belive otherwise). Regardless, this is a bad way to use classpath as it can lead to confusing problems down the road.
The objectdraw library is there but maybe I have to open or extract itfor it to be seen. But how ?
No you don't have to extract it, thats the whole point behind a jar. What you do have to do is ensure it is on the classpath for both compilation and execution. For compilation, read the help/documentation for BlueJ. For applet deployment, refer to the java tutorial section on applets and pay close attention to the applet tag description, especially the comma delimited archive attribute.
Good luck

Failed to load an application resource (Internal Error)

Similar Messages

Maybe you are looking for