Failed to load configuration file

Hi,
I've been trying to install the trial version of FrameMaker 9 on Vista Home Premium, but as soon as I start the installer, I get the following error message:
I then get Select Setup Language dialog box, but the drop-down list is empty. I do have a BootstrapperConfig.xml file in the Installer Resources folder, and the installer does work on my XP machine. I couldn't find any report of such an error anywhere. Note that, oddly, the XML file looks like a binary file...
Does anybody have an idea?
Thanks!
Raph

We did find a solution for our problem, but this was on a company PC with AD company policies. When all company policies was removed before installing, everything went perfectly
It is a bad solution to remove policies, but I did work, and maybe I will give you an idea on what to look for in your situation
/Christian

Similar Messages

Failed to load configuration file for the workflow

There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I tried opening his workflow and got
the error "Failed to load configuration file for the workflow."
Any ideas?

Hi Carltonw1,
Based on your description, I recommend to verify the things below:
Clear the SharePoint Designer cache and then open the workflow.
Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
Ask the user to create the same workflow and associated with another list to see how it works.
Check the ULS log for more detailed error message.
To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Failed to load configuration file: BootstrapperConfig.XML

Is there any way to install Framemaker 9 without running the setup.exe? I am trying to install Framemaker 9 in our Citrix farm as this was the version we were informed which was supported under Citrix. The farm is running XenApp 5.0 on Windows 2008 64 bit. I have built three servers and two of them installed fine. The third has been causing me a lot of trouble. A clean build of Windows 2008 and I can run the setup. But as soon as I install the Terminal Services role I hit the listed error. I dont' understand what's causing it, using Process Monitor to look at what setup.exe is doing when it's failing isn't showing any issue. It's accessing and reading the file fine.
I can't run the MSI without going through setup.exe and I can't get setup.exe running. I have 5 other Citrix servers to rebuild but I don't want to start them until I get this sorted as all the applications are running properly on the servers with Windows 2003 32 bit and Presentation Server 4.
Where can I go, what can I do, what is that installer doing which is failing to read the bootstrapperconfig.xml file, can I install without using setup.exe. I'm running out of ideas I've rebuilt this server half a dozen times now trying to isolate the problem. I've even tried streaming Framemaker rather than installing and that's not working properly either. Issues with the licensing service.
thanks
Eric

yes, that message has been up for a looong time. They've been having problems with the list over the past few weeks -- I just checked and the last Framers digest that I seem to have gotten was last Friday the 30th, and the links to the list and archives are down now, too, bummer!
Ordinarily you could also go to this link to register for the list:
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.frameusers.com/mailman/listinfo/framers
What a pain -- I hope that it comes alive again soon.
Well, another resource is the "Free Framers" list, run by the very obliging Omsys folks, more info here:
http://www.omsys.com/cgi-bin/dada/mail.cgi/list/framers

Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSO

Hi,
I'm trying to configure an openSSO setup that involves two GlassFish domains
domain1 - Acts as my openSSO server
domain2 - holds the policy agent and the protected web application
I'm using the following versions:
GlassFish - Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs)
OpenSSO - OpenSSO Express Build 8 - http://download.java.net/general/opensso/stable/opensso-build8/opensso_express_20090901.zip
Policy Agent - J2EE Agent 3.0 - http://download.java.net/general/opensso/nightly/latest/j2eeagents/appserver_v9_agent_3.zip
I've installed/configured GlassFish domains, openSSO and Policy agent as per the instructions on the following pages:
http://wikis.sun.com/display/OpenSSO/b5agentinstallinstruction
Similar steps are mentioned at - http://blogs.sun.com/vijayanand/entry/opensso_and_agent_installation_in
I'm not getting any errors or problems installing or configuring any of the servers:
Application Server Config Directory :
/opt/sun/SUNWappserver/domains/domain2/config
Application Server Instance name : server
OpenSSO server URL : http://abhidllx.abhidomain.com:8080/opensso
Agent URL : http://abhidllx.abhidomain.com:10080/agentapp
Agent Profile name : myagent1
Agent Profile Password file name :
/opt/sun/SUNWappserver/domains/agent-password
But when I try to access the housekeeping app - agentapp.war i.e.
I get the following error:
HTTP Status 500 -
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: PWC1243: Filter execution threw an exception
root cause
java.lang.ExceptionInInitializerError
root cause
java.lang.RuntimeException: Failed to load configuration: ApplicationSSOTokenProvider.getApplicationSSOToken(): Unable to get Application SSO Token
note The full stack traces of the exception and its root causes are available in the Sun GlassFish Enterprise Server v2.1 logs.-----
When I retry or press reload I get a different error message:
HTTP Status 500 -
type Exception report
message
descriptionThe server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: PWC1243: Filter execution threw an exception
root cause
java.lang.NoClassDefFoundError: Could not initialize class com.sun.identity.agents.filter.AmFilterManager
note The full stack traces of the exception and its root causes are available in the Sun GlassFish Enterprise Server v2.1 logs.-----
Now I don't know if I'm doing anything wrong coz I've tried it out over 10 times and I continue getting the same errors.
I googled a lot and managed to find this link - http://wikis.sun.com/display/OpenSSO/Troubleshooting+Java+Enterprise+Edition+%28Java+EE%29+Policy+Agents#TroubleshootingJavaEnterpriseEdition%28JavaEE%29PolicyAgents-AgentthrowsClassNotFoundExceptionexceptionwhenaccessingagentappapplication
I did what it says but I'm still getting the error.
I'm sharing few log files:
Anybody who can help?
thanks in advance.

contd...
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Naming table -> {iplanet-am-platform-site-id-list=01, iplanet-am-naming-policy-url=%protocol://%host:%port%uri/policyservice, iplanet-am-naming-session-class=com.iplanet.dpro.session.service.SessionRequestHandler, iplanet-am-naming-session-url=%protocol://%host:%port%uri/sessionservice, iplanet-am-naming-securitytokenmanager-url=%protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF, iplanet-am-naming-samlawareservlet-url=%protocol://%host:%port%uri/SAMLAwareServlet, serviceObjectClasses=iplanet-am-naming-service, iplanet-am-naming-auth-url=%protocol://%host:%port%uri/authservice, iplanet-am-naming-profile-class=com.iplanet.dpro.profile.agent.ProfileService, iplanet-am-naming-samlassertionmanager-url=%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF, 01=http://localhost:8080/opensso, iplanet-am-naming-policy-class=com.sun.identity.policy.remote.PolicyRequestHandler, iplanet-am-naming-jaxrpc-url=%protocol://%host:%port%uri/jaxrpc/, iplanet-am-naming-logging-class=com.sun.identity.log.service.LogService, iplanet-am-naming-profile-url=%protocol://%host:%port%uri/profileservice, sun-naming-idsvcs-jaxws-url=%protocol://%host:%port%uri/identityservices/, iplanet-am-naming-samlsoapreceiver-url=%protocol://%host:%port%uri/SAMLSOAPReceiver, sun-naming-idsvcs-rest-url=%protocol://%host:%port%uri/identity/, iplanet-am-platform-lb-cookie-value-list=01|01, iplanet-am-naming-logging-url=%protocol://%host:%port%uri/loggingservice, iplanet-am-naming-fsassertionmanager-url=%protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF, iplanet-am-platform-server-list=http://localhost:8080/opensso, iplanet-am-naming-samlpostservlet-url=%protocol://%host:%port%uri/SAMLPOSTProfileServlet, sun-naming-sts-mex-url=%protocol://%host:%port%uri/sts/mex, sun-naming-sts-url=%protocol://%host:%port%uri/sts, iplanet-am-naming-auth-class=com.sun.identity.authentication.server.AuthXMLHandler}
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, 01=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, 01|01=iplanet-am-platform-lb-cookie-value-list, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, http://localhost:8080/opensso=01}
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Site Id Table -> {01=01}
amNaming:10/29/2009 12:45:15:538 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Platform Servers -> [http://localhost:8080/opensso]
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
Platform Server IDs -> [01]
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
ERROR: WebtopNaming.getServerId():serverId null for server: http://abhidllx.abhidomain.com:8080/opensso
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
ERROR: WebtopNaming.getServerId()
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server ID.
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:673)
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:594)
     at com.iplanet.services.naming.WebtopNaming$SiteMonitor.<clinit>(WebtopNaming.java:1384)
     at com.iplanet.services.naming.WebtopNaming.startSiteMonitor(WebtopNaming.java:1291)
     at com.iplanet.services.naming.WebtopNaming.initializeNamingService(WebtopNaming.java:247)
     at com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:1067)
     at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
amNaming:10/29/2009 12:45:15:539 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
SiteMonitor initialization failed :
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server ID.
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:681)
     at com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:594)
     at com.iplanet.services.naming.WebtopNaming$SiteMonitor.<clinit>(WebtopNaming.java:1384)
     at com.iplanet.services.naming.WebtopNaming.startSiteMonitor(WebtopNaming.java:1291)
     at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:380)
     at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
     at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
amNaming:10/29/2009 12:45:15:557 AM IST: Thread[SystemTimer,10,Grizzly]
URLChecker.checkSocketConnection() returning true
amNaming:10/29/2009 12:45:15:572 AM IST: Thread[httpSSLWorkerThread-10080-1,10,Grizzly]
ERROR: WebtopNaming.getServerId():serverId null for server: http://abhidllx.abhidomain.com:8080/opensso
amNaming:10/29/2009 12:45:15:572 AM IST: Thread[SystemTimer,10,Grizzly]
URLChecker.check() : Http connection took 10 ms
amNaming:10/29/2009 12:45:15:572 AM IST: Thread[SystemTimer,10,Grizzly]
URLChecker.check() : setting status to AVAILABLE for http://abhidllx.abhidomain.com:8080/opensso/namingservice
amNaming:10/29/2009 12:45:15:601 AM IST: Thread[SystemTimer,10,Grizzly]Edited by: don_mahantya on Oct 29, 2009 10:19 PM

Exchange profile error: dbconnect.prop: failed to load properties file .\dbconnect.properties

All,
We are using PO 7.4 with SP5, and we have an issue while accessing URL Exchange profile page (http://<host:port>/webdynpro/dispatcher/sap.com/com.sap.xi.exprofui/XIProfileApp) it throw's the below error.
dbconnect.prop: failed to load properties file .\dbconnect.properties
dbconnect.prop: failed to load properties file
Did some one seen this before and have resolved ? Any help is highly appreciated.
Thank you, Pranay

Though below note is not applicable to you, i would suggest you to check if the destination is created by the configuration wizard? If not you can create one and see if it helps.
Create Java RFC destination XI_EXCHANGE_PROFILE manually: Navigate to http://[host]:[port]/nwa --> Configuration --> Infrastructure --> Destinations. Create the RFC Destination with PILDUSER as logon user.
1525193 - PI CTC: Exchange Profile Access after (EhP) Upgrade

Failed to load XML file

We are using RH10, output with WebHelp Pro. We recently upgraded our projects from RH9 to RH10. Performing a search in our online help generates the following error message: Failed to load XML file.
Is anyone else experiencing this issue? Any resolutions for this problem?
Thank you in advance for any help!

Hello again
If by "new specification" you mean that WebHelp Pro should only be used with RoboHelp Server, that would be a NO. It's always been the case that the "Pro" output was intended for use with RoboHelp Server. Now it could well be that RoboHelp 10 Pro output isn't as "forgiving" as earlier versions have been. I'm not sure.
Unfortunately we see so so many folks just gravitate right toward the "Pro" output in the misguided belief that it is somehow better or has more bells and whistles than the basic WebHelp has. But that's never been the case. What HAS always been the case is that the code driving things has been configured to work with the code on the RoboHelp server.
One change that I believe has occurred has been a renaming of the XML files that are created. So that may factor in here. I'm not sure. It might be best for you to just generate WebHelp output, then wholesale delete all the files from the server and publish fresh.
Cheers... Rick

XMLSocket "Failed to load policy file" error

I am trying to use an XMLSocket.swf file, and it is not connecting. Do I need to open up a port on my server? I am trying to run this on a dedicated remote Windows 2008 server.
Here is the error from FlashFirebug:
     OK: Root-level SWF loaded: file:///C|/Users/vcaadmin/AppData/Roaming/Mozilla/Firefox/Profiles/70vbx4ys.default/exten sions/flashfirebug%40o%2Dminds.com/chrome/content/flashfirebug.swf
    OK: Root-level SWF loaded: http://speak-tome.com/flash/XMLSocket.swf
    OK: Searching for <allow-access-from> in policy files to authorize data loading from resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf
    Error: Failed to load policy file from xmlsocket://speak-tome.com:9997
    Error: Request for resource at xmlsocket://speak-tome.com:9997 by requestor from http://speak-tome.com/flash/XMLSocket.swf has failed because the server cannot be reached.
My crossdomain.xml is saved to the root of the web directory and looks like:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
    <site-control permitted-cross-domain-policies="master-only"/>
    <allow-access-from domain="*"/>
    <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
    </cross-domain-policy>
I notice that both ports 843 and 9997 are closed for my domain (speak-tome.com - 72.167.253.16) when I check using a service such as yougetsignal.com/tools/open-ports. Do I need to get these ports open to get the policy file to work?

As a test, I uploaded my Flash/Gaia site into an existing site on my old host. And although the site actually works in this setting, when I run things in the FlashPlayerDebugger, I'm still getting Security Sandbox Violations - so (as adninjastrator suggested in earlier post), this may have nothing to do with the DNS changes - but perhaps with my setting things up wrong somewhere so that the Flashplayer is trying to access my local computer - maybe??
Debugger logs gives me this:
Error: Failed to load policy file from xmlsocket://127.0.0.1:5800
Error: Request for resource at xmlsocket://127.0.0.1:5800 by requestor from http://recreationofthegods.com/bin/main.swf has failed because the server cannot be reached.
*** Security Sandbox Violation ***
So, I've now uploaded the identical bin (which contains all the files for my site) - but I'm getting different behaviors on the two hosts.
On the new holistic servers, the site won't go past the first page: www.yourgods.com
On the 1&1 servers, I still get runtime errors in FlashPlayerDebugger - but the site runs ok - http://www.RecreationOfTheGods.com/bin/index.html
Posting those links in hopes someone with more experience in these sandbox issues can help steer me in the right direction.

When i downland flashcc it stop and tell me ERROR: DW039: Failed to load deployment File

when i downland flashcc it stop and tell me ERROR: DW039: Failed to load deployment File
what can i do? how to fix it?

open the cc dektop app -> click preferences -> Select language English (International) -> exit the cc app > restart the cc app > install flash cc.

When I install Flash Professional CC 2014, I got the Error: DW039: Failed to load deployment File

When I install Flash Professional CC 2014, I got the Error:
Exit Code: 16 Please see specific errors below for troubleshooting.
For example, ERROR: DW039 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File

The solution mentioned above doesn't work for me.
Change language, restart Macbook, error again, change language back and forth, restart every time, it just doesn't work.
I was installing same app - Flash Professional CC 2014.
I got the same error
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: DW039: Failed to load deployment File
So, same problem, same question.

Having trouble downloading app: ERROR: DW039: Failed to load deployment File

I am trying to download Flash Professional CC that I purchased through creative cloud, vut constantly having error (ERROR: DW039: Failed to load deployment File).
Please help!

Hi ji-wonwoo,
Please refer : When I install Flash Professional CC 2014, I got the Error: DW039: Failed to load deployment File
Thanks,
Atul Saini

Failed to load XML file with Content ID 'XYZ'

Hello,
We are using UCM Version:11.1.1.8.1DEV-2014-01-06 04:18:30Z-r114490 (Build:7.3.5.185) with site studio for creating templates and web sites.
While switching to contribution mode, we find 'Failed to load XML file with Content ID 'XYZ' error.[Here XYZ is the local checkin content]
In region we are using dynamic converter to convert the style of native document here below are region and its element details.
<region id="region3" name="Add_Content_Here" flags="1111111100100" metadata="xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue" dccommand="ssIncDynamicConversionByRule(SS_DATAFILE, 'Colleges_Template_Rule')">
      
      <element id="region3_element1" name="Editor" label="Editor" type="1" flags="111111111111111111111100000111100000000000001111001110111010001111101000000000000000000000000000">
        
        <linktoregioncontent createnewxml="true" createnewnative="false" choosemanaged="true" chooselocal="false" choosenone="false">
          <choosemanagedquerytext corecontentonly="FALSE">
            <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
          </choosemanagedquerytext>
        </linktoregioncontent>
      </element>
      <switchregioncontent createnewxml="true" createnewnative="true" choosemanaged="true" chooselocal="false" choosenone="false">
        <createnewnativedoctypes >
          <![CDATA[.doc,.docx,.txt,.rtf]]>
        </createnewnativedoctypes>
        <choosemanagedquerytext corecontentonly="FALSE">
          <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
        </choosemanagedquerytext>
        <defaultmetadata >
          <![CDATA[xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xCollegesList%3AisHidden%3Dtrue%26xShowInStudents%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xArticleSection%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue%26dpTriggerValue%3DCSE]]>
        </defaultmetadata>
      </switchregioncontent>
    </region>



Regardrs,
Syed

Hi Syed ,
Add the following trace sections :
requestaudit,sitestudio*,system + Full verbose tracing
Clear the server output .
Replicate the same steps and once error shows up , refresh server output and copy the logs to a text file and upload here .
Thanks,
Srinath

Failed to load image file-manager

Hello everybody,
I've recently install ArchLinux (0.6) on my machine. Then do a pacman -Sy and pacman -Su and fresh install xfree86, gnome and gnome-extra but when I run into gnome a window error appears:
error
Failed to load image file-manager
Details: file not found
I can't see mostly of the icons, like the foot of gnome in applications, the icon of file browser, the show desktop ..
what can it be?
well, thanks in advance.
Ps: xscreensaver should be added as a dependency when pacman -S gnome
Ps2: sorry my poor english

Blaasvis wrote:i am aware, this was caused by the gtk2 update
Yes, you're right.
To solve (until a next release) I done:
pacman -Rcd gtk2
pacman -A /var/cache/pacman/pkg/gtk2-2.4.0-1.pkg.tar.gz
And avoid to do pacman -Su ...
Thanks and bye.

Failed to load resource file sqlcmd.rll- during EHP1 installation

Hello all,
We are installing EHP1 on Netweaver with MSSQL server 2005 SP2
I am getting the error
failed to load resource file sqlcmd.rll
Please help
Rohit

It's always helpful to give as much information as possible when asking question. You did e. g. not specify
- in which phase/when this error occurs
- where this error message is coming
- what has been done prior to this
etc.
so everything leading to answers could only be wild guesses such as "are the harddisks all mounted and available in the resource groups" or "search the filesystem for that DLL" etc.
All we know is that "a DLL is missing".
Markus

ERROR: DW039: Failed to load deployment File Lightroom 4.3

I have tried 3 times, including rebooting but still get the same error once the app has downl;oaded, ectracted and then starts the install which gets to about 2% and then the install fails with the notice ERROR: DW039: Failed to load deployment File!!!!

Some additonal detail, Win8 64-bit with a 500GB SSD with approx 25pc free space.
I thought I;d got my copy of Lightroom seperatly to my CS subscription, so had already appplied the 4.3 update via the seperate download. It was only when the applicaiton manager prompted me for Lightroom 4.3 that I realised it came from CS. Interesting that the app manager looks at what it has installed, rather than what is actually installed on the machine.
Running the install from app manager gave this error. I then uninstalled Lightroom, thinking it was a seperate install, and re run the app manager,. Same error. HAve tried the obvious things of deleting temp, clean restarts etc.
Given I had already applied the 4.3 update I think its safe to safe this is bug/error with the CS App Manager installaiton rather than Lightroom 4.3 iteself.
Given the number of people with this commenting, and how many more not commenting, I'm hoping that this thread will come to the attention of Adobe support and get a speedy resolution.

"Failed to load excel file" an Error Message while running TDS upgrade util

Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........

Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon

Failed to load configuration file

Similar Messages

Maybe you are looking for