Failed to load data from CRM On Demand. ServerThe server is temporarily una

Hi,
I would just like to ask if any of you are encountering this error when sending SOAP requests to CRMOD. Is this just because CRM On-Demand is down?
Failed to load data from CRM On
Demand. ServerThe server is temporarily unavailable. Please try again later.
thanks,
John

Hi Royston,
The instance that we are accessing is: https://secure-ausomxdsa.crmondemand.com.
I assume that it's a test environment. So I navigated to (https://ebusiness.siebel.com/odcustomercare/support/alerts/staging/index.asp) "Staging & Test Environments" -> "Planned Maintenance - Staging" (since there is no Testing link) and saw a calendar of downtimes which didn't quite match-up to the date when we encountered the error. We encountered the error on November 25, which was marked on the calendar as a planned 8-hour downtime. During that day we didn't encounter continuous downtime but just erratic spurs of the the error. Am I looking in the right place? Thanks

Similar Messages

  • Data load failed while loading data from one DSO to another DSO..

    Hi,
    On SID generation data load failed while loading data  from Source DSO to Target DSO.
    Following are the error which is occuuring--
    Value "External Ref # 2421-0625511EXP  " (HEX 450078007400650072006E0061006C0020005200650066
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
    So, i'm  not getting  WHY in one DSO i.e Source  it got successful but in another DSO i.e. Target its got failed??
    While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
    Please explain..
    Thanks,
    Sneha

    Hi,
    I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO.  By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.  
    Please analyze the following
    Have you loaded masterdata before transaction data ... if no please do it first
    go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
    Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
    this may be the reason.
    Also check whether there is any special char involvement in your transaction data (even lower case letter)
    Regards
    BVR

  • Load Data from a table on one server's database, to the same table structure in multiple server databases

    Hi,
    I have a situation where i have to load data from one server/database table to multiple servers/databases.
    Example:
    I need to load data from dbo.TABLE_A  (on Server: Server_A & Database: Database_A)  to the same table on the list of server databases like
    Server: Server_B , Database: Database_B
    Server: Server_C , Database: Database_C
    Server: Server_D , Database: Database_D
    Server: Server_E , Database: Database_E
    Server: Server_F , Database: Database_F
    Server: Server_G , Database: Database_G
    Server: Server_H , Database: Database_H
    so on and so forth on 250 such server database combinations.
    The table structure is the same on all the servers.
    If i make the source or destination dynamic, it throws an error while mapping ?
    I cannot get Linked server permissions and SQL Server Config thing doesn't work as well.
    Please suggest on how to load data from one source to multiple server/databases.
    Thank you.

    I just need to transfer one table's data. its like i have to use a query to pick data for
    the most recent data. So i use something like, select A, B, C, D from dbo.table where ETL_TIMESTAMP > (the max(etltimestamp) in the destination on different server). There are no foreign key relationships and the data should not be truncated. it just had
    to append the new records.

  • Error while loading data from a file on application server

    Hi all,
    Facing an error while loading data from a flat file.
    Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
    I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
    Can you please tell me what could be the problem?
    Thank you all,
    Praveen

    Hi all,
    As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
    10/21/2006  5:11:48 AM which i need to change to 10/21/2006
    one more note is i have some of the fields as NULL in this field
    Last Updated Date
    10/21/2006  5:11:48 AM
    10/21/2006  5:11:48 AM
    NULL
    NULL
    10/21/2006  5:11:48 AM
    NULL
    I want to display the values as 10/21/2006 and NULL as it is.
    Please let me know if we have a conversion routine in datasource which can solve my problem.
    Regards,
    Praveen

  • Fail to load data from a control file!!!

    Hi members,
    I have Oracle 10g 2 installed on my PC runing Windows XP Pro OS,
    When I lauch EM to load data in a table from a control file (ex: load.ctl) I this smessage is promted:
    "Error - RemoteOperationException: ERROR: Wrong password for user"
    Note:
    - I try to load a local table in a local database from a local file
    - I use the local administrator user name/ password (administrator/xxxxxxxxx)
    - The listner process works well
    - I can access localy to my data base
    So can you help me!!

    Are you connected with that OS administrator and specified the correct password?. Have you specified the correct password for the database owner of the table you are loading?
    If you are not entering them manually, are using the currect OS and Database username and password in the Preferred Credentials settings for HOST and Database?

  • Error when load data from CRM 3.0 to BI 7.0

    Hi
    I have connect CRM 3.0 system with BI 7.0 the CRM is MDMP and the BI is Unicode.
    When I run the BW extraction of the CRM Business Partner data I've a short dump that say GETWA_NOT_ASSIGNED
    -.You address a field symbol that pointed to the line of an internal table that was deleted.
    -.You address a field symbol that was previously reset using UNASSIGNED or that pointed to a local field that no longer exist.
    -. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
    When I check the RFC in CRM I've disable the Unicode option
    I think that it's for the unicode because I've the last support package 12 installed in BI and the rest of the process chain are running perfect.
    My hotmail mail is [email protected] if you need the screen shot.
    Regards and thanks a lot
    Jose

    Hi Again.
    When the BP data is load into BI update it in PSA but the error occur with the update rule and the load monitoring is yellow and I need change it to red to abort it.
    Can you help to me?
    Regards
    Jose

  • Loading data from SAS tables to SQL server database

    Hi Guys
    I am championing a BI Proof of Concept project to create a self-service BI platform using tabular model parallel to  our traditional BI platform on SAS.
    I need to load certain SAS tables  to SQL server database so I can start creating reports in SSAS. Appreciate if anyone can suggest the process that I can load the files to database engine as a scheduled job.
    Appreciate your feedback and if further info needed please ask.
    Cheers
    Mark

    From VB6 there is not much alternative than to send row by row which indeed is slow.
    But you could write a C# application which uses a table-valued parameter to load the data, and this could be streamed so that the client never has the hold the entire file. I have an example of this in this article on my web site:
    http://www.sommarskog.se/arrays-in-sql-2008.html
    You can also use the SqlBulkCopy class, but I don't have any example of this myself.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Loading data from Z table to an ODS in BW/BI

    Hello Gurus,
    Can some one guide me how do I load data from a Z table which exists in the same BI system into an ODS/DSO. I'm working on a 04S system.
    Your help is highly appreciated.
    Thanks & Regards,
    Prashanth

    hi Prasanth
    u r using generic extraction method to load data from R/3 to BW server
    u can use
    T.Code SBIW or RSO2 to create Generic DataSource.
    step 1- logon to R/3 system
    step2 - check data in table
         for this use t.code se11.
    Db table name --- ZXXXXX.
    1.     select " Display " button.
    2.     select " contents"(shftctrlf11).--->execute.
    *step-3 *- create generic datasource for trasactiona data
         enter t.code- rso2
         select t.data -
    zXXXXX.(specify ur datasource name to create a new one).
         select create icon.
         appl.. component --- (browse and choose ur application component)(EX- sd).
         Extration from DBView"
         table/view---zXXXXX(give ur ztable name).
         text----give sht .des, m.des, L .des.......... for u data source.
         Select “generic delta” option in toolbar.
         Give delta specific field
         Field name---- (ex- pid)
    •     Select any radio button(ex-numeric  pointer).
         Settings— “additive delta” radio button( for delta loads from ods to i.cube).
         Select “save”  “save” .
         Package -
    some package name.
         Save
         Continiue
         Coustomize the datasource by seleting “ selection “ check boxes for fields.
         Save
         MSg:- datasource hve been created.
    SAP BW side:
    Step :1
    Enter t.code rsa13.
         Identify R/3 source system icon.
         Double click on R/3 s . system.
         Expand BW datasource
         Expand sap Appl. Comp..
         Select ur application  component( for Ex- SD).
         Context menu -- replicate datasource
         Refresh tree once the replication is complete.
         Find ur datasource.
         Double click on data source icon { this implies data source is not assigned).
         Context menu
         Assign infosource..
         i.source assignment:
    o     select “others” radio button
    o     and select option”create”.
         Flexible update.-------XXXXX
         Des----XXXXXX
         Continue
         Create I.Obj w .r t r/3 s.s fields.
         Assign the I.Obj to the fields of r/3 respectively.
         Enter 0RECORDMODE in comm.. structure.
           Activate
         create ODS obj and create structure and activate
         create update rules for Ods object with reference to i.source. and activate.
         Create infopackage and schedule data…….and monitor the data in psa and ods objects tables.

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Any diff. in loading data from (SD, MM , PP ) and from (SCM, CRM)

    Guyz-
      Can some one tell me, whether there will be any difference between loading data in BW from modules like SD-MM-PP and loading data from SCM,CRM.
      Any source of material/docs for loading data from SCM and CRM.
    Thanks in advance

    Hi Punzu,
    Check these:
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    CRM Business Content:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
    extract data from bw to crm, using APD-analyis process designer
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6d/40a2bb63ac744a80eb288830e01f7c/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/9b1b40fcdd8f5ce10000000a155106/frameset.htm
    Also check this:
    Re: CRM to BW loads
    Bye
    Dinesh

  • Error while extracting data from CRM

    Dear all,
    I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
    When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
    Kindly suggest what can be the problem.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    Thanks all in advance.
    Regards
    Adhira Anand

    Hi Meyappan,
    I have checked SM37, SM21 and ST22. There are no errors.
    in SM37 the below log is displayed.
    Job started
    Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
    Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
    DATASOURCE = ZCRM_SRV_DEFECT
    RLOGSYS    = CLNT645BIP
    REQUNR     = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
    UPDMODE    = D
    LANGUAGES  = *
             Current Values for Selected Profile Parameters               *
    abap/heap_area_nondia......... 2000000000                              *
    abap/heap_area_total.......... 2000000000                              *
    abap/heaplimit................ 40000000                                *
    zcsa/installed_languages...... DE                                      *
    zcsa/system_language.......... E                                       *
    ztta/max_memreq_MB............ 2047                                    *
    ztta/roll_area................ 6500000                                 *
    ztta/roll_extension........... 2000000000                              *
    1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
    IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
    Synchronized transmission of info IDoc 3 (0 parallel tasks)
    IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
    IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
    Job finished

  • Problem in Loading Data from SQL Server 2000 to Oracle 10g

    Hi All,
    I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
    21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
    Where Prj_Dim_Region is the name of my target table in Oracle.
    The error message is:
    955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
    java.sql.SQLException: ORA-00955: name is already used by an existing object
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
         at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.i(e.java)
         at com.sunopsis.dwg.cmd.g.y(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)
    I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
    <%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
    I have chosen to execute this code on target.
    Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
    When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
    select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
    But when i press OK to run it, I get this error message:
    java.lang.IllegalArgumentException: Row index out of range
         at javax.swing.JTable.boundRow(Unknown Source)
         at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
         at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
         at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
         at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
         at com.borland.dx.dataset.DataSet.a(Unknown Source)
         at com.borland.dx.dataset.DataSet.a(Unknown Source)
         at com.borland.dx.dataset.DataSet.a(Unknown Source)
         at com.borland.dx.dataset.DataSet.open(Unknown Source)
         at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
         at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
         at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
         at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
    Thank you so much in advance.
    Neel

    Hi Cezar,
    Can u plz help me with this scenario?
    I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
    Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
    java.sql.SQLException: ORA-00942: table or view does not exist
    and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
    "-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
    Please let me know how to make it work?
    Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
    Thank you for your time in advance.
    Regards,
    Neel

  • Getting short dump at the time of loading data from R/3 to ODS

    Hi BW Grurus,
    I am trying to load data from R/3 to ODS, but after running for a few minutes it is getting into the short dump and displays the following run time error. So please give me solution how I can load data without getting short dump. I tried thrice but it is giving the same and failed.
    Run time error : TSV_TNEW_PAGE_ALLOC_FAILED

    Hi,
    Check, is start routine or individual routine in present in update/transfer rule?
    May be read large amount data (select * from) another ODS and put into internal table cause these type of error.
    Regards,
    Saran

  • Loading data from flatfile to relational table,i am getting SQLLDR error

    Hi,
    While loading data from flatfile to relational table,i am getting SQLLDR error and i am unable to proceed further.
    Source is a flatfile and target is a Oracle database,i used "LKM file to oracle(SQLLDR)" and "IKM sql control append"
    and ran the interface.When i checked the seesion in operator window" after generating "CTL file" successfully
    the session got failed at "Call sqlldr" and was not able to proceed further.
    Environment details:
    ODI 11g
    database:Oracle 11g
    Operating system:Windows server 2008
    The error message it displayed in call sqlldr session file was
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 31, in ?
    File "C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\client\odi\bin\..\..\jdev\extensions\oracle.odi.navigator\scripting\Lib\javaos.py", line 198, in system
    File "C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\client\odi\bin\..\..\jdev\extensions\oracle.odi.navigator\scripting\Lib\javaos.py", line 224, in execute
    OSError: (0, 'Failed to execute command ([\'sh\', \'-c\', \'sqlldr DEVELOPER/pass_123@CPRDEV control="F:\\\\flatfile/CROSS_CURR.ctl" log="F:\\\\flatfile/CROSS_CURR.log" > "F:\\\\flatfile/CROSS_CURR.out" \']): java.io.IOException: Cannot run program "sh": CreateProcess error=2, The system cannot find the file specified')
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
         at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
         at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
         at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
         at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
         at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
         at java.lang.Thread.run(Thread.java:619)
    could u give me a solution to sort out this error ASAP.
    thanks,
    keshav.

    This was the following code generated .
    import java.lang.String
    import java.lang.Runtime as Runtime
    from jarray import array
    import java.io.File
    import os
    import re
    import javaos
    def reportnbrows():          
         f = open(r"F:\flatfile/TEST.log", 'r')
         try:
              for line in f.readlines():
                   if line.find("MAXIMUM ERROR COUNT EXCEEDED")>=0 :
                        raise line
         finally:
              f.close()
    ctlfile = r"""F:\flatfile/TEST.ctl"""
    logfile = r"""F:\flatfile/TEST.log"""
    outfile = r"""F:\flatfile/TEST.out"""
    oracle_sid=''
    if len('CPRDEV')>0: oracle_sid = '@'+'CPRDEV'
    loadcmd = r"""sqlldr DEVELOPER/<@=snpRef.getInfo("DEST_PASS") @>%s control="%s" log="%s" > "%s" """ % (oracle_sid,ctlfile, logfile, outfile)
    rc = os.system(loadcmd)
    if rc <> 0 and rc <> 2:
    raise "Load Error", "See %s for details" % logfile
    if rc==2:
    reportnbrows()

  • Error while loading data from DS into cube

    Hello All
    I am getting the below error while loading data from Data source to the cube.
    Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
    Wht am i suppose to do?
    Need ur input in this regard.
    Regards
    Rohit

    Hi
    Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
    If your business is April to March make it as  'V3'
    If your business is January to Decemeber make it as 'K4'..
    activate your update rules delete old data and upload again....
    Hope it helps
    Thanks
    Teja

Maybe you are looking for