Failed to load policis from repository in Jdeveloper 11g

Hi All,
While am trying to attach policy to a exposed service/external service to a composite.xml/external service, am getting below error in jdeveloper 11g.
"Failed to load policies from repository in jdeveloper 11g",
Can any body please share your input, why am not able to load policies?
I appreciate your help.
Regards
Santhosh Kumar. K

Thanks Wajid for your quick reply.
As per your instructions, you want me to set the default policy store path in the preferences.
so when am trying to do the same i didn't find the exact path in my machine, upto owsm folder which is same after that i didnt find any other folders(\policies\oracle)under it.
Path in my machine: <UserProfile>\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\oracle\store\gmds\owsm
your path: <UserProfile>\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29\DefaultDomain\oracle\store\gmds\owsm\policies\oracle
Regards
Santhosh Kumar. K

Similar Messages

  • Data load failed while loading data from one DSO to another DSO..

    Hi,
    On SID generation data load failed while loading data  from Source DSO to Target DSO.
    Following are the error which is occuuring--
    Value "External Ref # 2421-0625511EXP  " (HEX 450078007400650072006E0061006C0020005200650066
    Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
    So, i'm  not getting  WHY in one DSO i.e Source  it got successful but in another DSO i.e. Target its got failed??
    While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
    Please explain..
    Thanks,
    Sneha

    Hi,
    I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO.  By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.  
    Please analyze the following
    Have you loaded masterdata before transaction data ... if no please do it first
    go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
    Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
    this may be the reason.
    Also check whether there is any special char involvement in your transaction data (even lower case letter)
    Regards
    BVR

  • Failed to load properties from server. Please try again

    I'm getting this message from the win32, in the property dialog
    window.
    "failed to load properties from server. Please try again"
    In june 1 2001, thread was created
    http://forums.oracle.com/forums/message.jsp?id=442131
    The last message was
    According to the metalink admin, this issue describes a known
    bug with no current fix.
    Was this not fixed in 1.2 for win32?
    Mitch

    I'm getting this message from the win32, in the property dialog
    window.
    "failed to load properties from server. Please try again"
    In june 1 2001, thread was created
    http://forums.oracle.com/forums/message.jsp?id=442131
    The last message was
    According to the metalink admin, this issue describes a known
    bug with no current fix.
    Was this not fixed in 1.2 for win32?
    Mitch

  • Depmod error: failed to load symbols from ...

    Hello,
    I installed today arch and the installation went well except nvidia-340xx install gave me this error messsage; now, X wont start.
    depmod ERROR: failed to load symbols from /lib/modules/3.16.4-1-ARCH/kernel/drivers/usb/wusbcore/wusbcore.ko.gz invalide argument
    Any idea?

    Scimmia wrote:failed to load symbols doesn't sound good. It may need a reinstall of the kernel if something got corrupted on disk.
    This is exactly what i have done and the error message went away.
    But at boot still hangs.
    This is the Xorg.1.log file:
    [ 46.713]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 46.713] X Protocol Version 11, Revision 0
    [ 46.714] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 46.714] Current Operating System: Linux myhost 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
    [ 46.714] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=33a28745-d878-4b98-a9ab-dee48b53a9b2 rw quiet
    [ 46.714] Build Date: 21 September 2014 10:53:13AM
    [ 46.714]
    [ 46.714] Current version of pixman: 0.32.6
    [ 46.715] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 46.715] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 46.716] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Oct 16 15:26:17 2014
    [ 46.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 46.717] (==) No Layout section. Using the first Screen section.
    [ 46.717] (==) No screen section available. Using defaults.
    [ 46.717] (**) |-->Screen "Default Screen Section" (0)
    [ 46.717] (**) | |-->Monitor "<default monitor>"
    [ 46.717] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 46.717] (==) Automatically adding devices
    [ 46.717] (==) Automatically enabling devices
    [ 46.717] (==) Automatically adding GPU devices
    [ 46.717] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 46.717] Entry deleted from font path.
    [ 46.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 46.718] Entry deleted from font path.
    [ 46.718] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 46.718] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 46.718] Entry deleted from font path.
    [ 46.718] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 46.718] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 46.718] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 46.718] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 46.718] (II) Loader magic: 0x818d80
    [ 46.718] (II) Module ABI versions:
    [ 46.718] X.Org ANSI C Emulation: 0.4
    [ 46.718] X.Org Video Driver: 18.0
    [ 46.718] X.Org XInput driver : 21.0
    [ 46.718] X.Org Server Extension : 8.0
    [ 46.725] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
    [ 46.725] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 46.726] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 1
    [ 46.726] (EE) Error systemd-logind returned paused fd for drm node
    [ 46.726] (II) systemd-logind: releasing fd for 226:0
    [ 46.729] (--) PCI:*(0:1:0:0) 10de:0404:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    [ 46.729] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 46.729] (II) LoadModule: "glx"
    [ 46.730] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 46.775] (II) Module glx: vendor="NVIDIA Corporation"
    [ 46.775] compiled for 4.0.2, module version = 1.0.0
    [ 46.775] Module class: X.Org Server Extension
    [ 46.775] (II) NVIDIA GLX Module 340.46 Wed Sep 24 13:54:14 PDT 2014
    [ 46.775] (==) Matched nouveau as autoconfigured driver 0
    [ 46.775] (==) Matched nvidia as autoconfigured driver 1
    [ 46.775] (==) Matched nv as autoconfigured driver 2
    [ 46.775] (==) Matched modesetting as autoconfigured driver 3
    [ 46.775] (==) Matched fbdev as autoconfigured driver 4
    [ 46.775] (==) Matched vesa as autoconfigured driver 5
    [ 46.775] (==) Assigned the driver to the xf86ConfigLayout
    [ 46.775] (II) LoadModule: "nouveau"
    [ 46.775] (WW) Warning, couldn't open module nouveau
    [ 46.775] (II) UnloadModule: "nouveau"
    [ 46.775] (II) Unloading nouveau
    [ 46.775] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 46.775] (II) LoadModule: "nvidia"
    [ 46.775] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 46.776] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 46.776] compiled for 4.0.2, module version = 1.0.0
    [ 46.776] Module class: X.Org Video Driver
    [ 46.776] (II) LoadModule: "nv"
    [ 46.777] (WW) Warning, couldn't open module nv
    [ 46.777] (II) UnloadModule: "nv"
    [ 46.777] (II) Unloading nv
    [ 46.777] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 46.777] (II) LoadModule: "modesetting"
    [ 46.777] (WW) Warning, couldn't open module modesetting
    [ 46.777] (II) UnloadModule: "modesetting"
    [ 46.777] (II) Unloading modesetting
    [ 46.777] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 46.777] (II) LoadModule: "fbdev"
    [ 46.777] (WW) Warning, couldn't open module fbdev
    [ 46.777] (II) UnloadModule: "fbdev"
    [ 46.777] (II) Unloading fbdev
    [ 46.777] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 46.777] (II) LoadModule: "vesa"
    [ 46.777] (WW) Warning, couldn't open module vesa
    [ 46.778] (II) UnloadModule: "vesa"
    [ 46.778] (II) Unloading vesa
    [ 46.778] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 46.778] (II) NVIDIA dlloader X Driver 340.46 Wed Sep 24 13:34:03 PDT 2014
    [ 46.778] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 46.778] (++) using VT number 2
    [ 46.778] (--) controlling tty is VT number 2, auto-enabling KeepTty
    [ 46.778] (II) Loading sub module "fb"
    [ 46.778] (II) LoadModule: "fb"
    [ 46.778] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 46.778] (II) Module fb: vendor="X.Org Foundation"
    [ 46.778] compiled for 1.16.1, module version = 1.0.0
    [ 46.778] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 46.778] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 46.778] (II) Loading sub module "wfb"
    [ 46.778] (II) LoadModule: "wfb"
    [ 46.778] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 46.779] (II) Module wfb: vendor="X.Org Foundation"
    [ 46.779] compiled for 1.16.1, module version = 1.0.0
    [ 46.779] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 46.779] (II) Loading sub module "ramdac"
    [ 46.779] (II) LoadModule: "ramdac"
    [ 46.779] (II) Module "ramdac" already built-in
    [ 46.779] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 46.779] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 46.779] (==) NVIDIA(0): RGB weight 888
    [ 46.779] (==) NVIDIA(0): Default visual is TrueColor
    [ 46.779] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 46.780] (**) NVIDIA(0): Enabling 2D acceleration
    [ 46.904] (II) NVIDIA(0): Display (Acer AL2016W (DFP-0)) does not support NVIDIA 3D
    [ 46.904] (II) NVIDIA(0): Vision stereo.
    [ 46.904] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 46.906] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G84) at PCI:1:0:0 (GPU-0)
    [ 46.906] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 46.906] (--) NVIDIA(0): VideoBIOS: 60.84.68.00.00
    [ 46.906] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 46.909] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
    [ 46.909] (--) NVIDIA(0): CRT-0
    [ 46.909] (--) NVIDIA(0): CRT-1
    [ 46.909] (--) NVIDIA(0): TV-0
    [ 46.909] (--) NVIDIA(0): Acer AL2016W (DFP-0) (boot, connected)
    [ 46.909] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 46.909] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [ 46.909] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
    [ 46.909] (--) NVIDIA(0): Acer AL2016W (DFP-0): Internal TMDS
    [ 46.909] (--) NVIDIA(GPU-0): Acer AL2016W (DFP-0): 330.0 MHz maximum pixel clock
    [ 46.909] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 46.909] (**) NVIDIA(0): device Acer AL2016W (DFP-0) (Using EDID frequencies has
    [ 46.909] (**) NVIDIA(0): been enabled on all display devices.)
    [ 46.914] (==) NVIDIA(0):
    [ 46.914] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 46.914] (==) NVIDIA(0): will be used as the requested mode.
    [ 46.914] (==) NVIDIA(0):
    [ 46.914] (II) NVIDIA(0): Validated MetaModes:
    [ 46.914] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
    [ 46.914] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
    [ 46.951] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
    [ 46.951] (--) NVIDIA(0): option
    [ 46.951] (--) Depth 24 pixmap format is 32 bpp
    [ 46.951] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 46.955] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 46.955] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 46.955] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 46.955] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 46.955] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 46.955] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 46.955] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 46.955] (II) NVIDIA(0): Config Options in the README.
    [ 46.958] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
    [ 47.037] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 47.037] (==) NVIDIA(0): Backing store enabled
    [ 47.037] (==) NVIDIA(0): Silken mouse enabled
    [ 47.038] (==) NVIDIA(0): DPMS enabled
    [ 47.038] (II) Loading sub module "dri2"
    [ 47.038] (II) LoadModule: "dri2"
    [ 47.038] (II) Module "dri2" already built-in
    [ 47.038] (II) NVIDIA(0): [DRI2] Setup complete
    [ 47.038] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 47.038] (--) RandR disabled
    [ 47.045] (II) Initializing extension GLX
    [ 47.102] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 47.102] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 47.102] (II) LoadModule: "evdev"
    [ 47.102] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 47.102] (II) Module evdev: vendor="X.Org Foundation"
    [ 47.102] compiled for 1.16.0, module version = 2.9.0
    [ 47.102] Module class: X.Org XInput Driver
    [ 47.102] ABI class: X.Org XInput driver, version 21.0
    [ 47.103] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
    [ 47.103] (II) Using input driver 'evdev' for 'Power Button'
    [ 47.103] (**) Power Button: always reports core events
    [ 47.103] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 47.103] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 47.103] (--) evdev: Power Button: Found keys
    [ 47.103] (II) evdev: Power Button: Configuring as keyboard
    [ 47.103] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 47.103] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 47.103] (**) Option "xkb_rules" "evdev"
    [ 47.103] (**) Option "xkb_model" "pc104"
    [ 47.103] (**) Option "xkb_layout" "us"
    [ 47.141] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 47.141] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 47.142] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 29 paused 0
    [ 47.142] (II) Using input driver 'evdev' for 'Power Button'
    [ 47.142] (**) Power Button: always reports core events
    [ 47.142] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 47.142] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 47.142] (--) evdev: Power Button: Found keys
    [ 47.142] (II) evdev: Power Button: Configuring as keyboard
    [ 47.142] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [ 47.142] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 47.142] (**) Option "xkb_rules" "evdev"
    [ 47.142] (**) Option "xkb_model" "pc104"
    [ 47.142] (**) Option "xkb_layout" "us"
    [ 47.142] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 47.142] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 47.143] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 30 paused 1
    [ 47.143] (EE) Error systemd-logind returned paused fd for drm node
    [ 47.143] (II) systemd-logind: releasing fd for 226:0
    [ 47.144] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event1)
    [ 47.144] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
    [ 47.144] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 31 paused 0
    [ 47.144] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
    [ 47.144] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
    [ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event1"
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x40
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
    [ 47.144] (--) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
    [ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
    [ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
    [ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
    [ 47.144] (**) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 47.144] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb1/1-2/1-2:1.0/0003:045E:0040.0001/input/input1/event1"
    [ 47.144] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 8)
    [ 47.144] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
    [ 47.145] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
    [ 47.145] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
    [ 47.145] (II) No input driver specified, ignoring this device.
    [ 47.145] (II) This device may have been added with another device file.
    [ 47.145] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event5)
    [ 47.145] (II) No input driver specified, ignoring this device.
    [ 47.145] (II) This device may have been added with another device file.
    [ 47.146] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
    [ 47.146] (II) No input driver specified, ignoring this device.
    [ 47.146] (II) This device may have been added with another device file.
    [ 47.146] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
    [ 47.146] (II) No input driver specified, ignoring this device.
    [ 47.146] (II) This device may have been added with another device file.
    [ 47.146] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event8)
    [ 47.146] (II) No input driver specified, ignoring this device.
    [ 47.146] (II) This device may have been added with another device file.
    [ 47.147] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
    [ 47.147] (II) No input driver specified, ignoring this device.
    [ 47.147] (II) This device may have been added with another device file.
    [ 47.147] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 47.147] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 47.147] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
    [ 47.147] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 47.147] (**) AT Translated Set 2 keyboard: always reports core events
    [ 47.148] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 47.148] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 47.148] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 47.148] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 47.148] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 47.148] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 47.148] (**) Option "xkb_rules" "evdev"
    [ 47.148] (**) Option "xkb_model" "pc104"
    [ 47.148] (**) Option "xkb_layout" "us"
    [ 47.148] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 47.148] (II) No input driver specified, ignoring this device.
    [ 47.148] (II) This device may have been added with another device file.
    [ 79.735] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 79.735] (II) UnloadModule: "evdev"
    [ 79.735] (II) systemd-logind: releasing fd for 13:64
    [ 79.763] (II) evdev: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Close
    [ 79.763] (II) UnloadModule: "evdev"
    [ 79.763] (II) systemd-logind: releasing fd for 13:65
    [ 79.826] (II) evdev: Power Button: Close
    [ 79.826] (II) UnloadModule: "evdev"
    [ 79.826] (II) systemd-logind: releasing fd for 13:66
    [ 79.853] (II) evdev: Power Button: Close
    [ 79.853] (II) UnloadModule: "evdev"
    [ 79.853] (II) systemd-logind: releasing fd for 13:67
    [ 80.240] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 80.242] (EE) Server terminated successfully (0). Closing log file.

  • Failed to load workbook from BusinessObjects Enterprise

    Hi all,
    I created a Live Office document on top of WebI report and exported it to CMS and in Xcelsius when I try to import this LO document it gives a message "Failed to load workbook from BusinessObjects Enterprise".
    My BO version is XI 3.1, Live Office : 3.1, Xcelsius version is SP3.
    Any suggestions ?
    Regards,
    Mahesh

    Hi Vinay
    I tried your suggestion to load the Live Office data using the path Data > Import from Platform.  After selecting the Live Office file from BOE, the Live Office data don't seem to be loading into Xcelsius, in other words the Xcelsius hangs.  I'm currently using BOE 3.1 SP3 and my Xcelsius 2008 Enterprise and Live Office are also on SP3. 
    Is there anything I need to do to make it work eg. is there any FP to apply to fix this issue?
    Please advise.
    Thanks,
    Anthony

  • Failed to load data from CRM On Demand. ServerThe server is temporarily una

    Hi,
    I would just like to ask if any of you are encountering this error when sending SOAP requests to CRMOD. Is this just because CRM On-Demand is down?
    Failed to load data from CRM On
    Demand. ServerThe server is temporarily unavailable. Please try again later.
    thanks,
    John

    Hi Royston,
    The instance that we are accessing is: https://secure-ausomxdsa.crmondemand.com.
    I assume that it's a test environment. So I navigated to (https://ebusiness.siebel.com/odcustomercare/support/alerts/staging/index.asp) "Staging & Test Environments" -> "Planned Maintenance - Staging" (since there is no Testing link) and saw a calendar of downtimes which didn't quite match-up to the date when we encountered the error. We encountered the error on November 25, which was marked on the calendar as a planned 8-hour downtime. During that day we didn't encounter continuous downtime but just erratic spurs of the the error. Am I looking in the right place? Thanks

  • Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document.Line.

    Using Installation wizard to deploy SSIS packages from DEV server to QA server package store cause this error;
    Failed to load XML from the package file "" due to error 0xC00CE556 "Invalid at the top level of the document. Line 773, Column 93". This happens when loading a package and the file cannot be opened or loaded correctly into XML document.  This can be the
    result of either providing an incorrect file name to the LoadPackage method or the XML file specified having an incorrect format.  Please who have the idea of how this issue can be resolved?BI Developer

    Hi ,
       for this Error one and only one solution 
    go to view Code, line number and Column number shown in error message,
    and Remove code from there till last and save it,  it happens when we are moving Package from one server to another server. and VS adds some lines of code at the bottom of package
    something like this 
    andles="1" allownudging="1" isannotation="0" dontautolayout="0" groupcollapsed="0" tabstop="1" visible="1" snaptogrid="0"&gt;
        &lt;control&gt;
          &lt;ddsxmlobjectstreaminitwrapper binary="00080000921400008c040000" /&gt;
        &lt;/control&gt;
        &lt;layoutobject&gt;
          &lt;ddsxmlobj&gt;
            &lt;property name="LogicalObject" value="{BBFB0E
    Remove this code and save package it will work.  
    hope this will help to Developers who are searching for same ......... :) 

  • Can't create WS from PLSQL package (Jdeveloper 11g 4) (Exception occured)

    Hello,
    I'am using JDeveloper 11g preview 4.
    On database i have a package with 2 procedures.
    When I like to create a WS from database package I get the Exception:
    java.lang.ClassCastException: oracle.jdeveloper.webservices.model.plsql.PLSQLPortType
         at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.getJarFiles(AddToDeploymentProfiles.java:592)
         at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.action(AddToDeploymentProfiles.java:292)
         at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
         at java.awt.Dialog$1.run(Dialog.java:525)
         at java.awt.Dialog$2.run(Dialog.java:553)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Dialog.java:551)
         at java.awt.Component.show(Component.java:1300)
         at java.awt.Component.setVisible(Component.java:1253)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:361)
         at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:222)
         at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:194)
         at oracle.jdeveloper.webservices.model.Model.saveEditSync(Model.java:242)
         at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:366)
         at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:137)
         at oracle.jdevimpl.webservices.WebServicesAddin.fastCreatePlSqlService(WebServicesAddin.java:1503)
         at oracle.jdevimpl.webservices.WebServicesAddin.handleEvent(WebServicesAddin.java:870)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:513)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:843)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:486)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.menuDragMouseReleased(BasicMenuItemUI.java:1104)
         at javax.swing.JMenuItem.fireMenuDragMouseReleased(JMenuItem.java:578)
         at javax.swing.JMenuItem.processMenuDragMouseEvent(JMenuItem.java:475)
         at javax.swing.JMenuItem.processMouseEvent(JMenuItem.java:422)
         at javax.swing.MenuSelectionManager.processMouseEvent(MenuSelectionManager.java:283)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1043)
         at java.awt.Component.processMouseEvent(Component.java:5501)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
         at java.awt.Component.processEvent(Component.java:5266)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3968)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1778)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    Exception from Jdeveloper console
    Validating XML...
    Validating C:\Generali\WsGenerali\public_html\WEB-INF\web.xml
    Validate XML: 0 errors, 0 warnings.
    Aug 13, 2008 1:20:20 PM oracle.javatools.logging.LogUtils log
    WARNING: Exception in task oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1@1fa522d on model oracle.jdevimpl.webservices.wsdl.WSDLXmlModel@129271e; txn name=null
    java.lang.NullPointerException
         at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1.performTask(FixLocationAttribute.java:72)
         at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:172)
         at oracle.bali.xml.model.task.StandardTransactionTask.run(StandardTransactionTask.java:103)
         at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute.action(FixLocationAttribute.java:51)
         at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
         at java.lang.Thread.run(Thread.java:595)
    Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
    my procedures are:
    type r_sifrant is record
    ( id number,
    nadrejeni_id number,
    opis varchar2(100),
    privzeto varchar2(1)
    type r_cursor is ref cursor return r_sifrant;
    function f_sel_sifrant(p_naziv in varchar2) return r_cursor;
    procedure gen_polica(p_username in varchar2, p_polica_xml in clob, p_stevilka_police out number);
    Here I have posted a video of generating ws from plsql package (screen capture):
    http://shrani.si/f/x/P6/m5GSF8c/in2.avi
    Thank you for any help
    best regards
    Peterv
    Message was edited by:
    user651799

    Hello,
    I'am using JDeveloper 11g preview 4.
    On database i have a package with 2 procedures.
    When I like to create a WS from database package I get the Exception:
    java.lang.ClassCastException: oracle.jdeveloper.webservices.model.plsql.PLSQLPortType
         at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.getJarFiles(AddToDeploymentProfiles.java:592)
         at oracle.jdeveloper.webservices.model.generator.AddToDeploymentProfiles.action(AddToDeploymentProfiles.java:292)
         at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
         at java.awt.Dialog$1.run(Dialog.java:525)
         at java.awt.Dialog$2.run(Dialog.java:553)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.awt.Dialog.show(Dialog.java:551)
         at java.awt.Component.show(Component.java:1300)
         at java.awt.Component.setVisible(Component.java:1253)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
         at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:361)
         at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:222)
         at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:194)
         at oracle.jdeveloper.webservices.model.Model.saveEditSync(Model.java:242)
         at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:366)
         at oracle.jdevimpl.webservices.wizard.jaxrpc.PLSQLWizard.runWizard(PLSQLWizard.java:137)
         at oracle.jdevimpl.webservices.WebServicesAddin.fastCreatePlSqlService(WebServicesAddin.java:1503)
         at oracle.jdevimpl.webservices.WebServicesAddin.handleEvent(WebServicesAddin.java:870)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:513)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:843)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:486)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.menuDragMouseReleased(BasicMenuItemUI.java:1104)
         at javax.swing.JMenuItem.fireMenuDragMouseReleased(JMenuItem.java:578)
         at javax.swing.JMenuItem.processMenuDragMouseEvent(JMenuItem.java:475)
         at javax.swing.JMenuItem.processMouseEvent(JMenuItem.java:422)
         at javax.swing.MenuSelectionManager.processMouseEvent(MenuSelectionManager.java:283)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1043)
         at java.awt.Component.processMouseEvent(Component.java:5501)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
         at java.awt.Component.processEvent(Component.java:5266)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3968)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1778)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    Exception from Jdeveloper console
    Validating XML...
    Validating C:\Generali\WsGenerali\public_html\WEB-INF\web.xml
    Validate XML: 0 errors, 0 warnings.
    Aug 13, 2008 1:20:20 PM oracle.javatools.logging.LogUtils log
    WARNING: Exception in task oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1@1fa522d on model oracle.jdevimpl.webservices.wsdl.WSDLXmlModel@129271e; txn name=null
    java.lang.NullPointerException
         at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute$1.performTask(FixLocationAttribute.java:72)
         at oracle.bali.xml.model.task.StandardTransactionTask.runThrowingXCE(StandardTransactionTask.java:172)
         at oracle.bali.xml.model.task.StandardTransactionTask.run(StandardTransactionTask.java:103)
         at oracle.jdeveloper.webservices.model.generator.FixLocationAttribute.action(FixLocationAttribute.java:51)
         at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:147)
         at java.lang.Thread.run(Thread.java:595)
    Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
    WARNING: Exception Encountered
    Aug 13, 2008 1:20:20 PM oracle.j2ee.xml.XMLMessages warningException
    my procedures are:
    type r_sifrant is record
    ( id number,
    nadrejeni_id number,
    opis varchar2(100),
    privzeto varchar2(1)
    type r_cursor is ref cursor return r_sifrant;
    function f_sel_sifrant(p_naziv in varchar2) return r_cursor;
    procedure gen_polica(p_username in varchar2, p_polica_xml in clob, p_stevilka_police out number);
    Here I have posted a video of generating ws from plsql package (screen capture):
    http://shrani.si/f/x/P6/m5GSF8c/in2.avi
    Thank you for any help
    best regards
    Peterv
    Message was edited by:
    user651799

  • Aperture fails to load images from CF card, now not able to open

    I have a new Canon 5D Mark III camera and was sold a  Lexar SD Professional 32 GB card and a Lexar Professional UDMA 7 Compact Flash 32 GB card.  Downloading the images from the camera is a problem.  I am using  a Mac Book Pro 15" with operating system OSX 10.6.8.   Aperture is on a Lacie external hard drive and now fails to open.  Yesterday, a message saying 'unreadable files' would show and a few images would be saved to Aperture.  Also, later, an 'unrecognizable format' message would appear. Before it stopped working, it would download one or two selected images but not a large number of images.
    Any solutions?  Any comments would be appreciated.  Thank you!

    Thanks Ernie!  The images would not load from the camera with the USB camera supplied cable.  Yes, the MBP has slot for the SD card and it downloads the images. 
    The Aperture library is on the LaCie external HD.  Don't know if the drive is formatted as OS X extended.
    After posting the entry, I went to the local Staples store and purchased a Verbatium card reader and lo and behold, the world is fine.  The Aperture has returned and I was able to download all the CF card images.  The card reader would not read the SD card despite having it listed as one of the cards it's able to read.  Don't know what's happening here but at least I can use the MBP slot.
    To me, it's strange!  It was all looking quite grim!  Thank you for your assistance!

  • ImageIcon fails to load image from known source

    Hello,
    I have tried multiple ways to use ImageIcon to place an image within a JFrame.
    I have tried to place directly on the JFrame using drawImage and within a JLabel.
    I have tried multiple sources such as fully qualified regular files to the root and filenames relative to the current project. I have also tried using URLs.
    I am executing this project from Eclipse and have used both Windows and the Mac.
    My debugging code tells me the load of the image is not successful.
    Thank you for your help with this problem.
    ====================================================================
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.io.*;
    import javax.swing.*;
       class Main extends JFrame implements ItemListener {
         Image image;
         Image imagecopy;
         String imagefile;
         URL imageurl;
         String strslnts = "Slavery notes";
         String strnsnts = "North & South notes";
         String strwpnts = "Weapons notes";
         String strbtnts = "Battle notes";
         int frwidth, frheight, il, it;
         List stuslist;
         Main() {
              super("The Civil War as Presented by Garrett Neuman");
              imagefile = "file:///Users/teacher/Desktop/garrett/CivilWar/flags.gif";       
              image = getToolkit().getImage(imagefile);
              setIconImage(image);
              frwidth = 1024;
              frheight = 735;   //leave room for task bar
               WindowEventHandler weh = new WindowEventHandler();
               addWindowListener(weh);
               Insets insets = getInsets();
              il = insets.left; it = insets.top;
               setSize(frwidth, frheight);
              setResizable(false);
              try {imageurl = (new URL("http://www.ariped.com/01-pat_metheny_01.jpg"));}
              catch (MalformedURLException e) {stuslist.add("malformed url");};
              ImageIcon icon = new ImageIcon(imageurl);
              int fstatus = icon.getImageLoadStatus();
    //         stuslist.add(String.valueOf(fstatus));
              JLabel iconLabel = new JLabel(icon);
              setContentPane(iconLabel);
              setVisible(true);

    Thanks for the advice on SSCCE. This cracked the case for me and will be useful in the future.
    One observation I gained from testing is that even regular files seem to need to go through the URL process for the image load to be successful.
    This may or may not be useful but the following code caused the image load to fail. I tried commenting out the code line by line from the bottom up but the mere presence of the definition caused failure of the image load.
            public void paint(Graphics g) {
                  int iwidth = image.getWidth(null);
                  int frmidd = (il + frwidth - iwidth) / 2;     
                  g.drawImage(image, frmidd , (it + 30), null);
                  g.drawRect(75, 175, 210, 230);
             }

  • SSIS fails to load files from network when executed via SQL server Agent (SQL server 2008 R2 SP 2)

    Hi All,
    I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
    When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
    The error says "cannot open the datafile", while the datafile location is valid.
    Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
    Thanks,
    Andrei
    SSIS question

    Hi All,
    Thanks for your responses.
    I configured the SQL agent service to use my domain account with which I have no porblems accessing the folder. However the issue persisted.
    Thanks,
    Andrei
    SSIS question

  • SQLLOADER fails to load space from the CSV file

    Hello,
    -- I am using sqlloader to load tables(Release 10.2.0.4.0)
    --- I have actual spaces in my CSV files, which i want to load as it is in the tables.
    --- However, sqlloader loads "nulls" instead.
    --- Please help.

    Vishal,
    Use this and you should be able do this, I am attaching a working example based your input data
    Table: Layout
    create table layout (
    col1 varchar2(10),
    col2 varchar2(100),
    col3 varchar2(10)
    );# Control file: layout.ctl
    LOAD DATA
    REPLACE PRESERVE BLANKS INTO TABLE KLONDIKE.LAYOUT
    FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
    TRAILING NULLCOLS
    col1 char(10),
    col2 char(100),
    col3 char(10)
    {code}
    Loading from command line
    {code}
    C:. sqlldr username/password control=layout.ctl data=layout.txt log=layout.log
    {code}
    Verfiy using following sql that data loaded with one white single whitespace
    {code}
    select layout.* , length(col2) from layout;
    {code}
    Regards
    Edited by: OrionNet on Mar 28, 2009 12:09 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Failed to Load DTP from Datasource 2LIS_06_INV

    Dear Experts,
    I have a problem to load data to Infoprovider (0SRIV_D3) using DTP. I am using datasource for Invoice - 2LIS_06_INV.
    When i load data to the PSA, it is succeeded. But once i try to load it to DSO using DTP, it has failed.
    The Error Message is: Exceptions in Substep: Rules. I cannot read further information about the error, because when I click on the error icon, then the screen is run into ABAP Editor: RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
    Now I'm stuck with this error. How can I solve this error?
    Thanks in advance.
    Tika

    Hi,
    Try Running the DTP in degugging mode and see code where the exception is caught. then you will have some idea on the casue of the error.
    Thanks,
    Nagarjuna

  • Pacman fails to take packages from repository ?

    whenever pacman -S pkgname is  given for whichever software it says
    error: failed retrieving file 'subversion-1.7.8-1-i686.pkg.tar.xz' from mirror.us.leaseweb.net : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds
    error: failed retrieving file 'subversion-1.7.8-1-i686.pkg.tar.xz' from fruk.org : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds
    error: failed retrieving file 'subversion-1.7.8-1-i686.pkg.tar.xz' from mirror.yandex.ru : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds
    error: failed retrieving file 'subversion-1.7.8-1-i686.pkg.tar.xz' from mirrors.dotsrc.org : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds
    error: failed retrieving file 'subversion-1.7.8-1-i686.pkg.tar.xz' from mirror.mocker.org : Operation too slow. Less than 1024 bytes/sec transferred the last 10 seconds
    for all the mirrors in the list . This started happening since few weeks .

    You can also use reflector to get generate an up to date mirrorlist. Though this would involve using pacman. I imagine that you could also simply download the reflector package from the arch web site then install with "packable -U".
    Since you have not indicated that the rest of you internet is ridiculously slow, I have to guess that it is your chosen mirror and not your connection.

  • Fail to load data from a control file!!!

    Hi members,
    I have Oracle 10g 2 installed on my PC runing Windows XP Pro OS,
    When I lauch EM to load data in a table from a control file (ex: load.ctl) I this smessage is promted:
    "Error - RemoteOperationException: ERROR: Wrong password for user"
    Note:
    - I try to load a local table in a local database from a local file
    - I use the local administrator user name/ password (administrator/xxxxxxxxx)
    - The listner process works well
    - I can access localy to my data base
    So can you help me!!

    Are you connected with that OS administrator and specified the correct password?. Have you specified the correct password for the database owner of the table you are loading?
    If you are not entering them manually, are using the currect OS and Database username and password in the Preferred Credentials settings for HOST and Database?

Maybe you are looking for

  • How to fix 403 in Mac OS X built-in Apache?

    I'm trying to set a local environment on my new MacBook Air 13": built-in Apache with my own DocumentRoot, PHP, and MySQL. I usually update /etc/hosts just to run my local websites with a pretty permalink: local/example. For references, I usually che

  • RunWeek in the report.

    Hi friends,             I need to use Runweek in my report. How do I approach on this, what should I be mapping it with in my transfer rules , if I'm using a SAP delivered datasource?? Thanks alot in advance , immediate response will be appreciated.

  • WDS and WPA2 Personal Security

    I'm about to set up a WDS with an Airport Extreme, and an Airport Express. When I set up my WDS with Airport Admin Utility, will my security settings and my 64 character PSK be transfered from the Extreme to the Express? Do I need to apply my securit

  • No System Folder for Mac OS 9.1

    My 2001 iBook was purchased in Japan and all discs that came with it are Japanese. I installed an English language version of OS X back then, and have upgraded my OS twice since then. Now running Tiger (English). The problem I have is that I am unabl

  • How can I completely erase my iTunes on my iPhone

    My phone wont let me delete 3 incomplete downloaded songs so I think this is my only option if there is a way