Failed to load TemplateStream when called from API, but OK in Workbench

I am getting a "Failed to load TemplateStream for FormQuery" error when I invoke a simple process using the Java API. When I invoke the same process from WorkBench it's fine. I am using the FormsService in ES 8.2 turnkey installation. The operation is "renderPDFForm". Content Root URI is set to repository:// and Form to Render is set to /CANS_ASP/CANS_ASP.pdf, which is in the repository. Why would this work when invoked by way of right clicking in WorkBench, but not work when the process is invoked by the Java API?
Here's the whole error:
2009-08-25 20:31:23,109 ERROR [com.adobe.workflow.AWS] An exception was thrown with name com.adobe.livecycle.formsservice.exception.RenderFormException message:Failed to load TemplateStream for FormQuery=/CANS_ASP/CANS_ASP.pdf from location URI =repository://. while invoking service FormsService and operation renderPDFForm and no fault routes were found to be configured.
Thanks.
Jared

This problem is not solved, but I have a workaround. I have gotten it working by avoiding the repository and specifying the form location from the file system. This works:
Content Root URI: file:///C:\\
Form to Render: CANS_ASP.pdf
In case it wasn't clear, I'm not using a FormServiceClient object. I'm invoking an orchestration using a ServiceClient. The Content Root URI and Form To Render are specified in the properties of my renderPDFForm component in Workbench. I'm able to move ahead with development using this workaround for now, but the question remains about why repository:// does not work when my orchestration is invoked using the Java API but it works fine when tested from WorkBench.
Jared Langdon

Similar Messages

Extensions still work when calling from outside but not in listed in DN

Hello,
There are 3 extensions that still work when calling from the outside, but they don't reside in the DN listing. Where could they still exist? Using Cisco Unified CM 8.5.1.
Thank you for any assistance!

Review you dial plan and also the unassigned DNs, they might not exist as an exact match, but maybe in something with wildcards.
You can use DNA to search for them.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Mapedit fails when called from Visio, but works in Project

Hi -
I'm writing some vba code in Visio that 1. opens a selected Project file, 2. creates a Map, and 3. exports that map data to Excel. I've got the rest of the code working, but I get an error 1101 / argument value is not valid with this statement.
The MS Project code that works when run in Project is this:
Application.MapEdit name:="visio_HLS_export", Create:=True, OverwriteExisting:=True, _
DataCategory:=pjMapTasks, CategoryEnabled:=True, TableName:="tasks", _
FieldName:="Unique ID", ExternalFieldName:="TaskUID", ExportFilter:="IsMilestoneFlag"
The code in Visio is the same, except the "Application" object is replaced with my MSProject object (mspApp). I've got a similar routine set up to create the "IsMilestoneFlag" filter, and that is working fine. The filter is created in
the local organizer, then copied to Global.mpt, so it should be able to find it. Not sure what else could be causing the failure.
Set mspApp = CreateObject("MSProject.Application")
mspApp.MapEdit Name:="visio_HLS_export", Create:=True, OverwriteExisting:=True, _
DataCategory:=pjMapTasks, CategoryEnabled:=True, TableName:="tasks", _
FieldName:="Unique ID", ExternalFieldName:="TaskUID", ExportFilter:="IsMilestoneFlag"
Any ideas?

matttjo,
This might be s shot in the dark, but looking at the MapEdit Method, the only argument that is suspect when controlling Project from another app is the DataCategory argument. All other arguments are either string, or boolean. You might try adding a reference
to the DataCategory, something like:
DataCategory:=mspApp.pjMapTask
Since all arguments of the method are optional, you could try eliminating one at a time (or adding one at a time) and see which one causes the problem.
Hope this helps.
John

Crystal Reports 2008 fails when called from e Web Service under 64bit OS

I have discovered that Crystal Reports 2008 doesn't work when called from a Web Service running under 64bit Windows platforms (in my case Windows 2003 Server and Windows XP 64bit); practically no object is instantiated. I've tried several solutions without success.
Before creating a wrapper component to use under COM+, is there anybody who has a better and cheaper solution than creating another component to wrap CR 2008 ?

Hi Sergio,
Before I mark this post as assumed answered I would just like to say and re-iterate that at this time there is no one answer and we fully understand your concerns. As you know in CR 6.0 it came in 16 and 32 bit versions because at the time 32 bit was relatively new but 16 bit was the norm. This is also true for 32 to 64 bit, 32 is the norm and 64 bit is relatively new. We know and are well aware 64 bit is the future and we are working as quickly as we can to move in that direction. Because of the complexity of the Product it's not simply a matter of re-compiling all of our dll's in 64 bit format. The core of our data connectivity with our database drivers which are dependant on third party clients must also need to support 64 bit modes. This as well as Printer drivers also need to be 64 compatable, there are a multitude of dependencies that we rely on that must add 64 bit support. As a programmer you are well aware of the issues around Thunking back and forth between 32 to 64 bits, it can cause delays and potentially loss of data which is a whole other issue. Not to mention also that we would have to ship both versions potentially doubling the size of the distribution packages or doubling the size of the dll's to have the ability to work in both modes. Relatively speaking of course, it would not be double the size but the variables would need to be able to allocate 32 or 64 memory blocks.
The other option is to produce 2 separate versions, this alone is a massive project. Any issue would need to be fixed in separate code streams.
So I'm sure you can see it's not simply a matter of saying yes we support 64 bit. It's a massive project that is going to take time to do and we have to wait for the third party drivers to commit also.
Visual Studio .NET 2005 and 2008 is the only option if you want true 64 bit but you will be limited on what DB's you can support and export formats you can export to. They are the only drivers we did convert to 64 bit.
Thank you for your understanding
Don

Exception happened when calling deliver API for BI Publisher Bursting

Hi All,
I have developed a BI Publisher report on OBIEE standalone instance (Oracle Business Intelligence 11.1.1.5.0).
I am able to generate the report and burst the output to emails successfully.
But when I tried to burst the output directly to the printer or to save the output FILEs to local machine, am getting the below error/exception.
For PRINT type...error is below
Document delivery failed
[INSTANCE_ID=bisrv.oracleads.com.1305914111196] [DELIVERY_ID=1182]Error deliver document to printer::Exception happened when calling deliver API::Error deliver document to printer::Exception happened when calling deliver API::oracle.xdo.delivery.DeliveryException: oracle.xdo.delivery.DeliveryException: java.net.UnknownHostException: blr-ibc-7a-prn1 oracle.xdo.service.delivery.DeliveryException: oracle.xdo.delivery.DeliveryException: oracle.xdo.delivery.DeliveryException
for FILE type.... error is below
Document delivery failed
[INSTANCE_ID=bisrv.oracleads.com.1305914111196] [DELIVERY_ID=1192]Error deliver document to file::FILE=[D:\Harish:9930609876-10001969343.pdf::Exception happened when calling deliver API::FILE=[D:\Harish:9930609876-10001969343.pdf::Exception happened when deliver to file:: FILE_NAME= D:\Harish/9930609876-10001969343.pdf] ::oracle.xdo.delivery.DeliveryException: java.io.FileNotFoundException: D:\Harish/9930609876-10001969343.pdf (No such file or directory)oracle.xdo.ser
Can anyone please help on this?
Thanks,
Harish

Hi Varma,
thanks for the reply.
Here are the below sql scripts I used.
-- Printer
SELECT BILL_NUMBER      KEY,
'Layout'           TEMPLATE,
'en-US'                     LOCALE,
'PDF'                          OUTPUT_FORMAT,
'PRINT'                     DEL_CHANNEL,
BILL_NUMBER                OUTPUT_NAME,
'true'                          SAVE_OUTPUT,
'Direct Printers'           PARAMETER1,
'LocalPrinter'               PARAMETER2,
1                               PARAMETER3,
'd_single_sided'           PARAMETER4,
'default'                     PARAMETER5
FROM XXXX_BILL_TAB;
-- File
SELECT BILL_NUMBER           KEY,
'VLayout'           TEMPLATE,
'RTF'               TEMPLATE_FORMAT,
'en-US'           LOCALE,
'PDF'           OUTPUT_FORMAT,
'FILE'           DEL_CHANNEL,
'true'           SAVE_OUTPUT,
'Monthly Bill for ' || MOBILE_NUMBER OUTPUT_NAME,
'D:\Harish'      PARAMETER1,
MOBILE_NUMBER||'-'||BILL_NUMBER     PARAMETER2
FROM XXXX_BILL_TAB;
Thanks,
Harish
Edited by: 899863 on Dec 16, 2011 4:01 AM

Bring Excel 2007 to the front when called from LabView v9 in Windows 7

I am building a duplicate system using Windows 7, LabView v9 and Excel v2007. The original system used WinXP, Excel 2007 and LabView v8.6. The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible. This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front. The icon blinks in the Win7 taskbar and when selected displays over LabView. If I minimize the Labview window, Excel is there. This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar. The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode. At the customers request, the new system uses the .xlsm extension on the Excel template files. I have tried using application.visible = True in the macro as well. Could be a setting in Labview? Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview.
HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
Thank you in advance
Stephen
Solved!
Go to Solution.

I will try the windowstate change. Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls?
I am not sure about the API since the discussion there is with regard to DDE. (Taken from the link document: If you want to call a DLL that contains ActiveX
objects, use the Automation
Open VI with the Property
Node and the Invoke
Node.). I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be. Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work? I may be trying this already but in Excel through the use of the macro I call from LabView. It contains application.visible = True at the beginning before reading files and plotting data.
I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro. The puzzle for me is the blinking Excel icon in the task bar. This means active and running but not visible or something wrong as well. There are a few #VALUE cells if not all test in the system are run. Again not a problem in Excel 2007-WinXP-LV8.6
Thank you again one and all.

JTextField update problem when called from PropertyChangeEvent

Hi,
I'm trying to create forms that can be dynamically loaded with Class.forname(formName).
Those forms should always inherit some methods that make it easy to pass data to
them and receive data from them. The idea is that the data comes from a table which
sends a hashmap (String column/JTextField-name + String Value pairs) with firePropertyChanged
as soon as a new row is seleceted. The JTextFields in the form are marked with setName("FieldName") that has to correspond to the name of the columns of the table.
My problem is that I can't update the fields in my form when I'm calling getRow(HashMap)
from within propertyChangeEvent but that's necessary to keep the forms flexible.
JTextFieldName.setText(newText) just won't work. But it works when I call getRow(HashMap)
from the constructor. SwingWorker and threads to update the form didn't help.
I don't need to call pack() / update() / repaint() on the JFrame, do I ??
update() / validate() / repaint() etc. didn't work on the JTextField themselves.
Below is the code for one of the test-forms (just a JPanel that is inserted in a frame)
with all of it's methods. Does anybody have a solution to this problem ??
Thanks for taking time for that !!
Benjamin
* testTable.java
* Created on 15. April 2004, 16:12
package viewcontrol.GUI;
* @author gerbarmb
import javax.swing.*;
import java.awt.*;
import java.beans.*;
import java.util.*;
public class testTable extends javax.swing.JPanel
          implements
               java.awt.event.KeyListener,
               java.beans.PropertyChangeListener {
      * public static void main(String[] argv) { testTable tt = new testTable();
      * JFrame jf = new JFrame(); jf.setContentPane(tt); jf.setVisible(true); }
     /** Creates new customizer testTable */
     public testTable() {
          initComponents();
          HashMap hm = new HashMap();
           * Only for debugging, to see that the method getRow() works when
           * called from the constructor.
           hm.put("ttext", "TEst");
           this.getRow(hm);
      * This method is called from within the constructor to initialize the form.
      * WARNING: Do NOT modify this code. The content of this method is always
      * regenerated by the FormEditor.
     private void initComponents() {//GEN-BEGIN:initComponents
          java.awt.GridBagConstraints gridBagConstraints;
          jLabel1 = new javax.swing.JLabel();
          textIn = new javax.swing.JTextField();
          jLabel2 = new javax.swing.JLabel();
          intIn = new javax.swing.JTextField();
          jLabel3 = new javax.swing.JLabel();
          numIn = new javax.swing.JTextField();
          jLabel4 = new javax.swing.JLabel();
          dateIn = new javax.swing.JTextField();
          jLabel5 = new javax.swing.JLabel();
          dateTimeIn = new javax.swing.JTextField();
          jLabel6 = new javax.swing.JLabel();
          jCheckBox1 = new javax.swing.JCheckBox();
          keepValues = new javax.swing.JCheckBox();
          jButton1 = new javax.swing.JButton();
          setLayout(new java.awt.GridBagLayout());
          jLabel1.setText("Text");
          add(jLabel1, new java.awt.GridBagConstraints());
          textIn.setName("ttext");
          textIn.setPreferredSize(new java.awt.Dimension(100, 21));
          textIn.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    textInActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridwidth = 2;
          add(textIn, gridBagConstraints);
          jLabel2.setText("Integer");
          add(jLabel2, new java.awt.GridBagConstraints());
          intIn.setName("tint");
          intIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(intIn, new java.awt.GridBagConstraints());
          jLabel3.setText("Number");
          add(jLabel3, new java.awt.GridBagConstraints());
          numIn.setName("tnum");
          numIn.setPreferredSize(new java.awt.Dimension(50, 21));
          add(numIn, new java.awt.GridBagConstraints());
          jLabel4.setText("Date");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 0;
          gridBagConstraints.gridy = 1;
          add(jLabel4, gridBagConstraints);
          dateIn.setName("tdate");
          dateIn.setPreferredSize(new java.awt.Dimension(50, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 1;
          gridBagConstraints.gridy = 1;
          add(dateIn, gridBagConstraints);
          jLabel5.setText("DateTime");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 2;
          gridBagConstraints.gridy = 1;
          add(jLabel5, gridBagConstraints);
          dateTimeIn.setName("tidate");
          dateTimeIn.setPreferredSize(new java.awt.Dimension(80, 21));
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(dateTimeIn, gridBagConstraints);
          jLabel6.setText("Bit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jLabel6, gridBagConstraints);
          jCheckBox1.setName("tbit");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridy = 1;
          add(jCheckBox1, gridBagConstraints);
          keepValues.setText("keep values");
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 3;
          add(keepValues, gridBagConstraints);
          jButton1.setText("Send");
          jButton1.addActionListener(new java.awt.event.ActionListener() {
               public void actionPerformed(java.awt.event.ActionEvent evt) {
                    jButton1ActionPerformed(evt);
          gridBagConstraints = new java.awt.GridBagConstraints();
          gridBagConstraints.gridx = 7;
          gridBagConstraints.gridy = 2;
          add(jButton1, gridBagConstraints);
     }//GEN-END:initComponents
     private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_jButton1ActionPerformed
          sendRow();
     }//GEN-LAST:event_jButton1ActionPerformed
     private boolean sendRow() {
          java.util.HashMap hm = new java.util.HashMap();
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (((Component) cs).getName() != null) {
                    if (cs[i] instanceof JCheckBox) {
                         String value = ((JCheckBox) cs[i]).isSelected() ? "1" : "0";
                         hm.put(cs[i].getName(), value);
                    } else if (cs[i] instanceof JCheckBox) {
                         hm.put(cs[i].getName(), ((JTextField) cs[i]).getText());
          } // end for
          firePropertyChange("rowChanged", null, hm);
          return true;
     private void getRow(java.util.HashMap hm) {
          //if (! this.keepValues.isSelected()) {
          Component[] cs = this.getComponents();
          for (int i = 0; i < cs.length; i++) {
               if (cs[i].getName() != null && hm.containsKey(cs[i].getName())) {
                    Component component = cs[i];
                    String componentName = cs[i].getName();
                    String componentValue = (String) hm.get(component.getName());
                    if (cs[i] instanceof JTextField) {
                         // output for debugging
                         System.out.println("Setting " + cs[i].getName() + " = "
                                   + componentValue);
                         ((JTextField) component).setText(componentValue);
                    } else if (cs[i] instanceof JCheckBox) {
                         // output for debugging
                         System.out.println("JCheckBox found");
                         JCheckBox cb = (JCheckBox) component;
                         boolean selected = (componentValue == null ? false : (componentValue.equals("1")
                                   ? true
                                   : false));
                         ((JCheckBox) component).setSelected(selected);
          } // end for
          /* Uncomment this code snippet to retrieve the text that has been set
          for the components (that means JTextFields)
          This is just for debugging !
          Component[] cs = this.getComponents(); for (int i = 0; i < cs.length;
          i++) { if (cs[i].getName() != null) { if (cs[i] instanceof
          JTextField) { System.out.println("Value of " +cs[i].getName() + " = " +
          ((JTextField) cs[i]).getText()); } } } // end for
     private void textInActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_textInActionPerformed
     }//GEN-LAST:event_textInActionPerformed
     public void keyPressed(java.awt.event.KeyEvent e) {
          if (e.getKeyCode() == java.awt.event.KeyEvent.VK_ENTER) {
               sendRow();
     public void keyReleased(java.awt.event.KeyEvent e) {
     public void keyTyped(java.awt.event.KeyEvent e) {
     public void propertyChange(java.beans.PropertyChangeEvent evt) {
          if (evt.getPropertyName().equals("newRow")) {
               final PropertyChangeEvent finalEvt = evt;
               Runnable makeChanges = new Runnable () {
                    public void run() {
                         getRow((java.util.HashMap) finalEvt.getNewValue());
     // Variables declaration - do not modify//GEN-BEGIN:variables
     private javax.swing.JTextField dateIn;
     private javax.swing.JTextField dateTimeIn;
     private javax.swing.JTextField intIn;
     private javax.swing.JButton jButton1;
     private javax.swing.JCheckBox jCheckBox1;
     private javax.swing.JLabel jLabel1;
     private javax.swing.JLabel jLabel2;
     private javax.swing.JLabel jLabel3;
     private javax.swing.JLabel jLabel4;
     private javax.swing.JLabel jLabel5;
     private javax.swing.JLabel jLabel6;
     private javax.swing.JCheckBox keepValues;
     private javax.swing.JTextField numIn;
     private javax.swing.JTextField textIn;
     // End of variables declaration//GEN-END:variables

The problem of the change in the form not being comitted is that
I forgot SwingUtilities.invokeLater(makeChanges); in the bottom
part in public void propertyChange(java.beans.PropertyChangeEvent evt)
after having created a new Runnable.
Changes to the UI often have to be comitted by SwingUtitlities.invokeLater()
though I don't know that much about Swing yet.
Thanks to everybody who tried to solve that problem.
Benjamin

PicDelete and PicLoad asking to save changes when called from SUD

Hello!
I'm trying to load different reports, change text values and graphics and export those reports to images. Sometimes I want to remove all reportsheets and load a new layout, but when calling picdelete a messagebox pops up and asks the user whether he wants to save the changes. I'm trying to get rid of that messagebox because my script gets halted and I don't want the user to overwrite my layout.
This only happens when picdelete is called from a SUD and for the picdelete command this behaviour can be circumvented by using Call Execute("Call picdelete"). Sadly the same procedure does not work for the picload command.
When called from the DIAdem scripting tab the report is loaded fine but I have found no way to use this command from a SUD without the messagebox appearing.
Is there a workaround? Does DIAdem 2012 show the same behaviour?
Edit: I guess I was wrong about that Call Execute("Call picdelete") workaround. I'm seeing the same messagebox. I don't know why I thought that helped.
Best regards,
grmume
PS: I'm using DIAdem 2011

Hi grmume
In DIAdem 2012 the behavior is the same. But we have a completely new easy to use object oriented programming interface. There exist a method that reset the modified status of the Report
http://zone.ni.com/reference/en-XX/help/370858K-01/reportapi/methods/report_method_resetmodified_ire...
In former versions you only have the readonly variable PicIsChanged.
But I tried a small script in DIAdem 2011 after changing the layout and it does not ask for saving the layout.
call PicDelete
Call picload("Demo.TDR")
Hope this helps
Winfried

SESSION EXPIRED and CPU Utilisation is 100% when called from Pro*C

Dear Colleague
We are having a production system developed using Pro*c and PL/SOL packages in HP Unix.
The system is doing the following,
A file will be decoded using Proc and data will be load into 3 temporary tables (permanent table used for temporary) using SQLLoader. Then it calls a PL/SQL package which will process the data in the temporary tables and will store the summary information in Transaction table and will returns a unique id to the calling Pro*c module. The whole process is completed in a single process/oracle session.
The PL/SQL package, join the 3 Temporary tables and retrieve the data into an Oracle object(Collection) and process it. Then the processing summary will be loaded into Transaction table and return the Primary key.
Now the problem is, when the temporary tables are loaded with more than 200,000 rows, in some cases the system is running for hours before it finish. And during the process the session shows as EXPIRED in the database and CPU utilization for the respective ProcessId in Unix is almost 100%. Then after a while the session comes alive and finishes the process.
And for some other cases, with same row count, the entire process finished in seconds.
If the same process (PL/SQL package) when run directly using a separate session inside the database(and the temporary tables are still available), rather than calling from Pro*c, it finishes in seconds, where it took hours when called from Pro*c.
It will be highly appreciated, if anyone let me know, what actually is wrong. whether it is the resource allocation or should there any known problem in calling huge PL/SQL packages from Pro*C.
we are using Oracle 10g and HP-UX ed42 B.11.31 U System.
regards
Sajid

Dear Colleague
I just want to rephrase the problem again.
We have a Pro*C application. This will read the binary file and dump the data in ascii format to a data file. Then, within from the pro*C, 14 Dynamic tables will be created using EXEC SQL EXECUTE IMMEDIATE statement, each having almost a maximum of 45 columns. Also, created INDEXES to the tables in the same way from Pro*C.
And Control file will be created as follows
OPTIONS (SILENT=(FEEDBACK)) UNRECOVERABLE
LOAD DATA
INTO TABLE FILENAME_BCI_USED
FIELDS TERMINATED BY '|'
TRAILING NULLCOLSColumns Listed
Then Sql loader will be called using system commands (from pro*C itself) to loead the data into the table, as follows.
   sprintf(syscommand,"sqlldr %s CONTROL=%s DATA=%s log=%s rows=5000 direct=true", glb_connect_string,ctl_file,data_file, log_file );
   ret_value = system(syscommand);data loaded successfully.
Then the Pro*C will call a PL/SQL package for processing the data.
The PL/SQL package, to process the data, dynamically construct the below query and use it for the reference cursor to retrieve data and load into a collection.
v_sql_query := 'SELECT '|| '/*+ index(b '||p_File_Name ||'_1) index(b '||p_File_Name ||'_2) index(s '||p_File_Name ||'_3) index(s '||p_File_Name ||'_4) index(s '||p_File_Name ||'_5) index(s '||p_File_Name ||'_6) index(e '||p_File_Name ||'_7)*/'   || '
         iot_call_record(b.rec_no ,
         b.rec_type ,
         substr(b.field1,1,15) ,
         nvl(substr((select s0.field1 from ' || SU_Table ||
                     ' s0 where s0.rec_no = s.rec_no and s0.sub_rec_type = 203) ,1, 25),
                             substr(b.field2, 1, 25)),
         substr(b.field3,1,25) ,
         b.field4 ,
         b.field5 ,
         s.field1 ,
         s.field2 ,
         (select sum(s1.field1) from ' || SU_Table ||
                     ' s1 where s1.field2 = s.rec_no and trim(s1.field2) = ''00'' ) ,
         s.field3 ,
         e.field2/power(10,e.field3) ,
         s.field4 ,
         s.field5 ,
         s.field6 ,
         s.field7 ,
         s.field8 ,
         s.field9 ,
         s.field10 ,
         nvl(b.field6,''F'') ,
         NULL ,
         s.field11 ,
         (select sum(s2.field11) from ' || SU_Table || ' s2 where s2.rec_no = s.rec_no) ,
         NULL)
      FROM   ' || BCI_Table || ' b , ' || SU_Table || ' s, ' || EXCH_Table ||
                     ' e WHERE b.filename = s.filename
        AND    b.rec_no = s.rec_no
        AND    (b.field7 = 0 OR b.field7 = 1)
        AND    TRIM(s.chg_type) = ''00''
        AND    (s.field1 = e.field2_Code )
        AND    not(s.field4 = ''V'' and s.field12 > 1)
        AND    not(s.field4 = ''W'' and s.field12 > 1)
        AND    not(b.rec_type = 75 and s.field12 > 1)
        AND    not(b.rec_type = 75 and s.field4 =''D'')
        AND    s.sub_rec_type <> 203
        and    (s.field12 = 1 or b.rec_type not in (20,30))';
    OPEN cur_call_events FOR v_sql_query;
    LOOP
      g_tab_call_events.DELETE;
      --      Execute immediate v_sql_query bulk collect into g_tab_call_events;
      FETCH cur_call_events BULK COLLECT
        INTO g_tab_call_events limit 5000;
      EXIT WHEN g_tab_call_events.COUNT = 0;
      BEGIN
        SAVEPOINT Block_Begin;
        process_records(p_file_name,
                        g_tab_call_events);
      EXCEPTION
        WHEN Severe_Error THEN
          Write_error('S');
          ROLLBACK TO Block_Begin;
        WHEN Warning THEN
          Write_error('W');
        WHEN NO_DATA_FOUND THEN
          Write_error('S');
          ROLLBACK TO Block_Begin;
      END;
    END LOOP;And the above module is behaving strangely.
With almost 150K or more rows in BCI_Table & SU_Table each and less than 10 rows in EXCH_Table, the application takes more than 100 minutes to complete the process.
When we checked the session activity, it is showing the same query for a very long time.
Where as files with 100K or less rows are getting processed in a minute.
And the performance for 150K+ rows is inconsistent, that when we isolate the package and run it directly calling from oracle, it is getting executed in less than 4 minutes. Whereas it takes 100+ minutes from Pro*C.
The execution plan for the above query is given below
                              Object Owner     Object Name          Cost     Cardinality     Bytes     CPU cost     IO cost
SELECT STATEMENT, GOAL = HINT: FIRST_ROWS                              494     2497          494406     143334576     483
TABLE ACCESS BY INDEX ROWID               SCHEMA1          FILENAME_SU_USED     4     1          21     30610          4
INDEX RANGE SCAN                    SCHEMA1          FILENAME_3          3     1          21764     3
SORT AGGREGATE                                                  1     13
INDEX RANGE SCAN                    SCHEMA1          FILENAME_5          3     1          13     22064          3
SORT AGGREGATE                                                  1     7
TABLE ACCESS BY INDEX ROWID               SCHEMA1          FILENAME_SU_USED     4     1          7     30706          4
   INDEX RANGE SCAN                    SCHEMA1          FILENAME_3          3     1          21764     3
CONCATENATION
HASH JOIN                                                  355     2496          1307904     103068617     347
   TABLE ACCESS FULL                    SCHEMA1          FILENAME_EXCH_USED     3     2          26     35987          3
   HASH JOIN                                                  352     2496          813696     96532618     344
    VIEW                         SYS          VW_NSO_1          4     20          880     12549326     3
     HASH UNIQUE                                             4     20          220     12549326     3
      TABLE ACCESS FULL                    SCHEMA2          IOT_SERVICE_MATRIX     3     20          220     45207          3
    HASH JOIN                                                  347     15850          2234850     76145180     341
     TABLE ACCESS FULL                    SCHEMA1          FILENAME_SU_USED     130     16584          1111128     33625872     127
     TABLE ACCESS FULL                    SCHEMA1          FILENAME_BCI_USED     217     23757          1758018     31405896     214
NESTED LOOPS                                                  139     1          198     40265959     136
   NESTED LOOPS                                                  135     1          154     27716633     133
    NESTED LOOPS                                             132     1          141     27680646     130
     TABLE ACCESS FULL                    SCHEMA1          FILENAME_SU_USED     129     1          67     27655992     127
     TABLE ACCESS BY INDEX ROWID          SCHEMA1          FILENAME_BCI_USED     3     1          74     24654          3
      INDEX RANGE SCAN                    SCHEMA1          FILENAME_1          2     1          15493     2
    TABLE ACCESS FULL                    SCHEMA1          FILENAME_EXCH_USED     3     1          13     35987          3
   VIEW                              SYS          VW_NSO_1          4     1          44     12549326     3
    SORT UNIQUE                                                  4     20          220     12549326     3
     TABLE ACCESS FULL                    SCHEMA2          IOT_SERVICE_MATRIX     3     20          220     45207          3Regards
Sajid
Edited by: user12039545 on Jul 11, 2010 12:05 AM
Edited by: user12039545 on Jul 11, 2010 12:15 AM
Edited by: user12039545 on Jul 11, 2010 12:32 AM
Edited by: user12039545 on Jul 11, 2010 12:34 AM
Edited by: user12039545 on Jul 11, 2010 12:37 AM

Stored Procedure Does Not Run Properly When Called From Portlet

We have a simple Java portlet that calls a PL/SQL stored procedure which we wrote. The stored procedure sends a large number of emails to users in our corporation using the "utl_smtp" package. The stored procedure returns a count of the emails back to the Java portlet when it's finished. This number is displayed in the portlet.
Our problem:
The stored procedure functions as expected when run from a PL/SQL block in SQL*Plus, and the Java portlet calls the procedure properly when sending out a smaller number of emails (Less than 200 usually). When we get into a higher number of emails the procedure hangs when called from the portlet, but it STILL functions properly from SQL*Plus. It does not return the number of emails sent
and the Java portlet is unable to return a SQLException. Also, we have noticed that emails are sent at a much slower pace from the stored procedure when it's called from the portlet.

Any Ideas?

HR_INFOTYPE_OPERATION not working when called from Dynamic action

Hi ,
       Senario : I would like to execute a form from dynamic action which
creates a record in 0015 (Additional payment IT) .
       I have writen the code as shown below am using FM HR_INFOTYPE_OPERATION
. When i execute the program from se38 it is creating a record, however it is
not created when it is called from dynamic action..when i debugged the code in
inside the FM HR_INFOTYPE_OPERATION there is a FM HR_MAINTAIN_MASTERDATA where
they are using call dialog (statement) and
sy-oncom = 'N'   when called from Dynamic action and
sy-oncom = 'S'   when called executed directly.
I tried to change the sy-oncom to S while run from Dynamic action it created
the record.
So Can anyone explain me abt sy-oncom and how can i resolve the issue..
code..
REPORT ZHRPYENH01 .
perFORM TERMIATION_9000.
INCLUDE DBPNPMAC.
      FORM Termiation_9000                                          *
FORM TERMIATION_9000.
INFOTYPES : 0015.
*data : i .
*i ='c'.
*break-point.
*message i000(000) with i.
TABLES : PRELP.
DATA : P9000 TYPE PA9000." with header line.
DATA : P0000 TYPE STANDARD TABLE OF P0000 WITH HEADER LINE.
DATA : P0015 TYPE STANDARD TABLE OF P0015 WITH HEADER LINE.
DATA : HIRE_DATE LIKE SY-DATUM,
         TERM_DATE LIKE SY-DATUM.
DATA : MOLGA LIKE T500L-MOLGA VALUE '25',
         SEQNR LIKE PC261-SEQNR.
DATA : RGDIR TYPE STANDARD TABLE OF PC261 WITH HEADER LINE.
DATA : ACTUAL_PERIOD LIKE PA9000-RETENTION.
DATA : PNP-SW-FOUND TYPE SY-SUBRC ,
         PNP-SY-TABIX TYPE SY-TABIX.
DATA : TER_PERNR LIKE PA0001-PERNR.
DATA : REF_PERNR LIKE PA0001-PERNR.
data : key type BAPIPAKEY.
data : payed_amount type p0015-BETRG.
data : future_payment_amount type p0015-BETRG.
data : p0002 like pa0002.
types : begin of t_deduction ,
          deducation_date like p0015-begda,
          future_payment_amount type p0015-BETRG.
types : end of t_deduction.
data : future_deduction type standard table of t_deduction with
*header line.
data : future_deduction type t_deduction .
data : RETURN type BAPIRETURN1.
*data : deduction_p0015 like standard table of p0015 with header line.
data : deduction_p0015 like p0015 .
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
****Prepare 0015 data for deduction
*deduction for payed amount
clear deduction_p0015.
*refresh deduction_p0015.
deduction_p0015-pernr = REF_PERNR.
*deduction_p0015-pernr = TER_PERNR.
deduction_p0015-lgart = 'M120'.
deduction_p0015-begda = sy-datum + 1 .
deduction_p0015-endda = sy-datum + 1 .
deduction_p0015-BETRG = payed_amount.
deduction_p0015-WAERS = 'SGD'.
deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
**deduction for future payment amount
*loop at future_deduction.
*clear deduction_p0015.
*deduction_p0015-pernr = REF_PERNR.
**deduction_p0015-pernr = TER_PERNR.
*deduction_p0015-lgart = 'M120'.
*deduction_p0015-begda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-endda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-BETRG = future_deduction-future_payment_amount.
*deduction_p0015-WAERS = 'SGD'.
*deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
*endloop.
Create a deduction wage type in 0015 for the employee
break-point.
CLEAR RETURN.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
if not return is initial.
message E000(000) with
'Referred Employee could not be locked for referal payment deducation,
please try after some time'.
endif.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
    INFTY                  = '0015'
    NUMBER                 = REF_PERNR
   SUBTYPE                = 'M120'
OBJECTID               =
LOCKINDICATOR          =
   VALIDITYEND            = SY-DATUM
   VALIDITYBEGIN          = SY-DATUM
RECORDNUMBER           =
    RECORD                 = deduction_p0015
    OPERATION              = 'COPY'
TCLAS                  = 'A'
   DIALOG_MODE            = '2'
NOCOMMIT               =
VIEW_IDENTIFIER        =
SECONDARY_RECORD       =
IMPORTING
   RETURN                 = return
   KEY                    = key
break-point.
COMMIT WORK.
if not return is initial.
*return-TYPE
*ID
*NUMBER
*MESSAGE
message I000(000) with return-MESSAGE.
endif.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
EXPORTING
    NUMBER              = REF_PERNR
    VALIDITYBEGIN       = '18000101'
IMPORTING
   RETURN              = return
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
Thanks and regards
-Senthil Bala
Message was edited by: senthil bala

Hi Senthil
Why at all U want a subroutine to create a record in IT0015 through Dynamic action.There are some standard codes available to update infotypes.
Let me give U an example
14     9CON     BETRG     4     2     I     INS,0015 This will create a record in IT0015 when IT0014 is updated with Wagetype 9CON
14     9CON     BETRG     4     3     W     P0015-LGART='5400' Set wagetype for IT0015(Here U can use a subroutine call to set the wagetype)
14     9CON     BETRG     4     4     W     P0015-BETRG=P0014-BETRG set amount for IT0015(Here U can use a subroutine call to get the amount)
14     9CON     BETRG     4     5     W     P0015-BEGDA=P0014-ENDDA set the dates(Here U can use a subroutine call to set the dates)
Hope this will help U.
Please award points if helpful

Advanced table:not able to view more than 10 rows when called from workflow

Hi everyone,
I'm calling a page that contains advanced table and its controller class from two places.
First one is from a inquiry form, when this page is called it works fine. when there are more than 10 rows, first 10 are shown on page render and when we click on Next link, other rows are shown. This is becuase I have given the records displayed property on adavanced table = 10. I'm fine till here.
Second one is I'm calling this page again from a workflow notificaiton. There is a link called view more details on the workflow notification , click of this link will open the page with 10 records displayed. But when user tries to click on Next it doesn't work. It just doesn't refresh.
Its very wierd,. not able to understand what could be wrong when calling from wf notificiton. Its the same page and conroller code used in both the places.
Please help me!!
Thanks
Sunny

Thanks for your response Kristofer. You are correct, there was a difference in the parameters and the issue is resolved now.

Set the default field value to transaction code field, when calling from WD

Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
Sanket

Hi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
          host TYPE string,
          port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well?

Scim makes leafpad take a while to load, except when run from terminal

Leafpad normally loads up in an instant. But with scim running (More specifically with the required environment variables exported. Scim simply running without the environment variables does not cause the problem, but then scim does not work.), although it shows up immediately, the scrollbar, menubar etc are greyed out for a few seconds and the program cannot be used until it is fully loaded.
I'm sure this is specifically a leafpad problem, because there is no noticable lag in other programs. (Mousepad for example is fine.) However, the fact that it loads immediately when run from a terminal scares me. Why doesn't gmrun (and the fvwm menu) work just like a terminal? Is there a possible fix to this problem?

droog wrote:
I'm not having this problem as far as i can see, I use fvwm and scim already so installed leafpad to test and it starts instantly from fvwm's menu or terminal.
from gmrun leafpad starts instantly too so maybe i'm missing something.
what are you exporting?
Just the normal:
export XMODIFIERS=@im=SCIM
export GTK_IM_MODULE="scim"
export QT_IM_MODULE="scim"

Subtemplate footer is not coming when calling from the main template

Hi All,
The footer from the subtemplate is not coming in the output when calling from the main template. Does anybody worked on the subtemplate?
If the same footer is put in the main template, it is displaying.
Please respond as this is a critical issue for us.
Thanks,
Ambadas

Hi Tim,
Thanks for your reply. Here is syntax which I got from the Oracle BI Publisher blog. And this is to just test locally.
http://blogs.oracle.com/xmlpublisher/2006/04/11?import:file:///C:/temp/HeaderFooter.rtf
<?import:file:///d:/test/GEPOPRINT_GER_GER.rtf?>
<?import:file:///d:/test/GEPOPRINT_US.rtf?>
<?for-each@section:G_HEADERS?>
<?if:POH_REPORT_NAME='GER PO w/GERMAN Data'?>
<?call-template:PO_GERMAN?>
<?end if?>
<?if:POH_REPORT_NAME='US Purchase Order'?>
<?call-template:PO_US?>
<?end if?>
<?End for-each?>
And I don't have any footers in the main template but in the subtemplate I have the respective footers. If you want, I can send all the RTF's to you directly.
Let me know.
Thanks,
Ambadas

Failed to load TemplateStream when called from API, but OK in Workbench

Similar Messages

Maybe you are looking for