Failed to load the configuration file for the workflow

Hi experts, yesterday I created and publish custom workflow using SPD from client pc using site administrator account but today its shows error message. I tried creating new test workflows, edit and publish to think it will push a fresh SPD settings
in working condition and it works pretty right.
But the thing I noticed after closing SPD Im not able to re-open workflows and it gives the same error message Failed to load the configuration file for the workflow. This issue only happen today since day one I used SPD and all the time
Im using the same pc.
Any ideas will be appreciated.
Cheers, R2C3 ----------------------------------- starting sharepoint :)

HI
Maybe you have permission problem or there is invalid xoml murkup.
To verify this from SharePoint Designer use the following steps.
In Office SharePoint Designer, in the folder list, select the plus sign next to Workflows library to expand it
1.Next select the plus sign of the workflow in question to expand it
2.Double-click the configuration file (Workflow_name.xoml.wfconfig.xml) to open it
3.Right-click on the page, and then select Verify well-formed XML
4.Correct any errors and save the file
5.Reopen the workflow to test
Also double check that you are using SPD with the same credentials you created workflow
Hope this will help.
Regards,
Marcin

Similar Messages

Failed to load configuration file for the workflow

There are two of us who have full control on our Sharepoint 2013 site. I'm able to create workflows and publish them fine. The other user is able to create workflows, but he gets an error when trying to run them. I tried opening his workflow and got
the error "Failed to load configuration file for the workflow."
Any ideas?

Hi Carltonw1,
Based on your description, I recommend to verify the things below:
Clear the SharePoint Designer cache and then open the workflow.
Ask the user to open the workflow in SharePoint Designer and check if the workflow contains error.
Ask the user to create the same workflow and associated with another list to see how it works.
Check the ULS log for more detailed error message.
To reproduce this issue, could you please provide the detailed steps in the workflow for further research?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Field on the EFW2 file for the Federal w-2's, 941-ss box on the W-3SS form

HI,
This is regarding the layout of the file W-3SS with the check box on the top showing 941-SS. When we did the W-2's and W-3 for the Virgin Islands employee's manually, this wouldn't be a problem. But since 2006 when we filed the MMREF electronically, we are looking for the field which would do the same think as checking this 941-ss box on the W-3SS form.
Is there anything on SAP which tells us what field to populate for 941-SS
Basically we need to populate the field on the EFW2 file for the Federal w-2's which will indicate to the Government that this file corresponds to 941-SS, which previously we would have checked that box on the manual W-3.
Please help me with this as this is very imp......
Thanks in advance.
Gracy

Hi Ervin,
Check in SE71 form <b>HR_F_W2_AUDIT</b> for the value in box 12 for benefits. You will see that this value comes from various any Tax groups like T184 to T195. There are also other groups, please check that also.
I checked for one empployee, the value displayed was "D Deferals to 401K" in box 12b which is tax field T027 & tax form group W23D in form HR_F_W2. When you check the WT assigned to this group I see 3070(Catch Up Contribution) & 3100(401K EE Pre Tax).
Similarly you can check for one employee & check the value for box 12b. You should get it.
So what I think is we are checking correct configuration for the WT attached to that tax form group. Only thing is that we need to check the correct Tax form field.
What exactly you want to change? I think before changing check some SAP notes for the change.
Hope this helps.
All the best!!!
Thanks,
Sarika.

Folio Builder: An error has occurred opening the source file for the article layout.

I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=true

Questions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is.

Where is the data file for the address book located, I need to restore mine from backup but don't know where it is to do so. Putting my Mac Pro onto icloud synching contacts resulted in duplicate and triplicates of the same cards. I have a few THOUSAND contacts and the last time this happened was on mobile me. that had a function where you could replace info on the mobile me server with info on the computer. I see no way to do that on the new cloud.

In the stupidly hidden user's Library->/Application Support/AddressBook/ labeled as AddressBook-v22.abcddb
For TM restores, see Pondini's TM FAQs for starters, since I don't use TM.

An error has occurred while updating article layouts. The InDesign file for the layout cannot be...

When trying to complete the tutorial for indesign I get the following error when trying to add an article to my folio:
"An error has occurred while updating article layouts. The InDesign file for the layout cannot be found."
I am able to create the folio then I click into articles. My document "WiFi_v.indd" is open when clicking add article, but I keep getting this error message.
I am using the following versions of the software (Should be the latest).
- Folio Builder (Downloaded version Version 1.1.8.0)
reported version:
11.4.3.20111129_m672305 7.5.5.17
Adobe In Design 7.5.2 CS 5.5
Also tried reinstalling the plugins (uninstall + install)

If you're on Mac OS with the OS in another language than english the "User" folder might contain a non english character and causing problems.
I e in Sweden the Mac OS user-folder is called "Användare". When attempting uploading articles from a file locaded anywere this "Användare" is in the file path the Folio producer says Error finding InDesign layout, due to -what i think is-the "ä" in Användare. If you still want to work local you can place the InDesign files directly into the Macintosh HD. In this case the User folder is not used.
BR
Henrik

Can anyone say me the Configuration material for the ECC 6.0 FI/CO

Hi everybody
Can anyone say me the Configuration material for the ECC 6.0 FI/CO
thanks n regards
venuprasad

Hi
please refer
http://www.sap-img.com/
http://www.surya-padhi.net
hope this helps
pushkaraj

Where is the plist file for the Finder option "Always Show Extensions"?

Where is the plist file for the Finder option "Always Show Extensions"?
I am designing a new master NetRestore image for Leopard. I have all my Dock and FInder prefs tweaked and customized on the image. (They all live in /System?Library/User Template/English.lproj/Library/Preferences...)
The one preference I cant get to stick is the option to "Always SHow Extensions" It appears to not be located in the usual com.apple.finder
Can you tell me where this preference lives?

user/library/Preferences/com.apple.AddressBook.plist
Hold down the Option key when selecting "Go" in the Finder's menu to see your Library folder.

Where is the configuration file for my message server ?

Hi:
I am in charge for a message server version upration from 5.1 to 5.2, My question is very simply , I can not find configuration file for message server,when I execute start-msg [smtp | imap | pop | store | http] which configuration file it will read ?
and /usr/iplanet/server5/slapd-www/config/slapd.conf
is my ldap server configuration file ?
and the following three file is mta related file ?
/usr/iplanet/server5/msg-www-1/imta/config/dispatcher.cnf
/usr/iplanet/server5/msg-www-1/imta/config/job_controller.cnf
/usr/iplanet/server5/msg-www-1/imta/config/imta.cnf
My question is very simple and I am a new junior for ims . Anyway Thanks !!
$ imsimta version
iPlanet Messaging Server 5.2 (built Feb 21 2002)
libimta.so 5.2 (built 15:07:23, Feb 21 2002)
SunOS ctidml 5.8 Generic_108528-27 sun4u sparc SUNW,Ultra-5_10

There is NO ONE messaging server configuration file.
The store configuration is read from the configuration ldap server on startup, and cached in temporary files, msg.cnf and local.cnf. Do not attempt to edit these files, as that won't work.
Use the configutil utility to see what the store configuratin is

No dsn is present in the configuration file in the reporting services 2008

HI i have found this error in the log file of my reporting services ,
when i comes to the Configuration file in that
my DSN path is empty no input code is there in that DSN tags
<DSN>
<DSN/>
it shows the empty tags,
and my Current Report Server Report Credentials are Windows,Service account credentails
will it take the problem or what
We have repair the BIDS setup also still not able to solve my issue.
once this is resolved now able to send the emails using subscriptions.
pls infom abut this , i have sufferd this problem last 20 days.
Please update the above query with high priority
TanQ

Hi Ychinnari,
According to your description, you found error in log file of reporting services, when you come to rsreportserver.config file, the DSN tag is empty.
DSN specify the database server that hosts the report server database connection string. The report server database is created, this value will be encrypted and added to the configuration file. To solve the problem, we need to connect to either an
existing report server database or create a new one for this instance. For detail information, please refer to the following steps:
Start the Reporting Services Configuration Manager and connect to the report server instance for which you are creating the database.
On the Database page, click Change Database.
We can create a new report server database or select an existing database, then click Next.
Connect to the instance of the Database Engine that you will use to create and host the report server database.
Specify properties used to create the database.
Specify the credentials used by the report server to connect to the report server database.
Review the information on the Summary page to verify the settings are correct, and then click Next.
Verify the connection by clicking a URL on the Report Server URL page or Report Manager URL page.
For detail information about Configure a Report Server Database Connection, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms159133.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Different formats of the flat file for the same target

In our deployment, we use plugin code to extract the csv files in the required format. The customers are on same version of datamart, but they are on different versions of source database - from 3.x to 4.5 depending on which version of application they are using. In 4.0, we introduced a new column email in the user table in the source database. Accordingly, plugin will add the field in the csv file. But not all the customers will get the upgraded version of plugin at the same time. So ETL code needs to decide which data flow to process depending on the format of the csv file to load data to the same target table. I made the email field in the target table nullable but it still expects the same format of the csv file with delimiter for null value.
Need help to achieve this. Can I read the structure of the flat file in DS or get the count of delimiters so that I can use a conditional to use different data flow based on the format of the flat files.
Can I make the email column in the flat file optional?
Thanks much in advance.

You can add an email column that maps to null in a query transform for the source that does not contain this column.
Or else you can define two different file formats that map to the same file. One with the column and one without

Which are the crucial files for the account settings for mozilla thunderbird?

Hello everyone,
I am syncing my configuration files between multiple pc's via git - now I'd like to finally inherit thunderbird in this, but I can't figure out the bare needed files for the setup of the accounts.
Means: I don't need passwords, mail, attachments, etc. pp. ... - I only need the account settings (name, imap/smtp-server, port-settings, ...), so I don't have to set up nine mail-accounts on every pc and on every reinstall.
Up until now I couldn't find a definite answer (besides 'copy the whole folder', which is no option since it goes through my git-server which has a yearly traffic-limit) I'm asking here.
Thanks in advance
Ps:
An option would be to sync only the files directly in the folder without subfolders, but that wouldn't be clean.

prefs.js

How to get the .class file for the extended Controller .java file

Hi,
I did the below steps.
1. Created New OAWorkspace
2. Created New project
3. Imported the page .xml file
4. Added new .java file by extending the controller class
5. Added code in the .java file.
6. Ran the .xml file
As I copied all the folders from Unix box, the page was opened.
But My question was where can I see the .class file the extended controller. It's a .java file. How to compile and get the .class file for this .java file. If I get this .class file, I can go to the page and click the personlize page. and change the Controller name to the new path by ftp ing the new class to the cust.oracle.apps.pos.changeorder.webiui.
Please let me know how to create the .class file.
Thanks,
HP

All are Java files are stored in JDEV_INSTALL_DIR:\jdevhome\jdev\myprojects\
In your case the path java would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myprojects \cust\oracle\apps\pos\changeorder\webui\
AND
Once you compile the java file in Jdeveloper, Class files get generated @ below path
In your case the path of class would be
JDEV_INSTALL_DIR:\jdevhome\jdev\ myclasses \cust\oracle\apps\pos\changeorder\webui\
Duplicate Thread-
Thanks
--Anil
http://oracleanil.blogspot.com/

Restoring iWeb files when you don't have the DOMAIN file for the folder

Can anyone assist please.
I have recently lost my hard drive in my iMac and have now replaced and recovered as much as I can.
I have managed to recover all my iWeb files but can't get the domain file from the route of the iWeb directory back so every time I start iWeb it try's to create a new web site.
Does anyone know how I can rebuild the Domain file ?
Thanks in advance.

Anthony Poole wrote:
Does anyone know how I can rebuild the Domain file ?
Tony ~ Welcome to the discussions. You'll have to rebuild it manually from scratch — see paragraph 2.3 of this FAQ page for some tips:
http://iwebfaq.org/site/iWebBackupretrieve.html

Where can I get the project files for the online training that is available for adobe apps ... for now its Dw CC 2014

I just need the link to where I can get the adobe project files for the online training that is available so I can go through it with actual practice ... Thanks !

Links to project files are found on this tutorial's page (right side).
See Creating your first web site in DW CC -
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.

Failed to load the configuration file for the workflow

Similar Messages

Maybe you are looking for