Failed to load to the desktop (error code 1)

help

Resuloz7 what steps have you utilized to resolve the error? Have you implemented the steps listed in Error: "Failed to install" | Creative Cloud Desktop? If you have any questions regarding the steps listed in the document you are welcome to update this discussion.

Similar Messages

Failed to install Creative Cloud desktop error code 1 Windows 8.1

I just recently tried to begin a trial of creative cloud in order to get access to photoshop. I really need photoshop for my school because of how powerful it is and the tools is offers. A couple weeks ago I tried to download and install creative cloud for windows 8 64-bit, and the download begins, but once it reaches around 50%, it raises an error message saying "We've encountered the following issues: Creative Cloud desktop failed to install (error code 1)". I was having problems with the internet at the time so I just naturally assumed it was the cause. So I went ahead and gave it a couple of days before I tried again. When I tried again I received the same error message at the same time. I continued to look around for a solution and trying it everyday but I have had absolutely no luck with it, and honestly am getting quite frustrated with it. I have looked everywhere for a solution, I tried the adobe clenup tool, I have checked to make sure I don't have any previous versions of adobe products on my computer, and even tried installing it as an admin in safe mode, and still nothing. I have no idea what to do next, but I know that I have to get ahold of photoshop, one way or another, and it must have the professional tools included in the creative cloud edition. Please tell me there is a simple solution and I have been blind this entire time. If there is no solution, can someone direct me to another software similar to photoshop that has access to the plug-in dDo? (I am in game development and have heard how powerful dDo is and have been dying to use it. I have also been anxious to get photoshop, but it doesn't appear to be possible without the creative cloud desktop app).

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

Teststand error states that a vi failed to load in the Labview Run-Time Engine

I am getting an error in teststand that states that a vi failed to load in the Labview Run-Time Engine version '14.0.1'
If I look at the software loaded on my system with the NI Measurement and Automation Explorer I have Labview Run Time engines for version 2009, 2010, 2011, 2012, 2013, & 2014 on my system.
How do I get this VI to run on this system when it is called by test Stand?
Thank you

The RTE 14.0 was loaded as part of my deployment and after I ran this I got an update notice for the F1 patch which I also loaded.
I do not have labview loaded on this system, only the run time engines from running my deployment.
When I launch t he teststand sequence, when it calls the labview VI, I get the following error moessage:
Error: Failed to load VI 'C:\builds\RelayVoltageMeaure.vi' in the LabVIEW Run-Time Engine version '14.0.1'. LabVIEW: The VI is not executable. This error may occur because the VI is either broken or contains a subVI that LabVIEW cannot locate. Select File>>Open to open the VI and verify that you can run it. VI Path: C:\builds\RelayVoltageMeaure.vi[Error Code: -17600, Failed to load a required step's associated module. ]
I have attached the teststand sequence if this helps.
Thanks
Attachments:
QuantumDigitalBd.seq ‏13 KB

Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405

Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>

<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>


</system.serviceModel>
<system.webServer>

<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>


</system.webServer>
</configuration>
Thanks,
Swathi

Right on - I have done that a number of times.

Failed to retrieve data from the database.---- Error code:-2147482925

Hi,
I am getting random error while generating a PDF report in Crystal Report XI R2.
The error details are
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException: Impossibile r
Error in File C:\WINDOWS\TEMP\{11834722-3B8E-4DFF-B7B6-B3D52DF904C1}.rpt:
Failed to retrieve data from the database.---- Error code:-2147482925 Error code
name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputControlle
r.export(Unknown Source)
at ps_emxCrystalReportUtil_mxJPOZsBymAAAAAEAAAAD.getReport(ps_emxCrystal
ReportUtil_mxJPOZsBymAAAAAEAAAAD.java:488)
at ps_emxCrystalReportUtil_mxJPOZsBymAAAAAEAAAAD.ps_storeReportWithoutCh
eckin(ps_emxCrystalReportUtil_mxJPOZsBymAAAAAEAAAAD.java:183)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
Please help me.
Thanks in advance
-Abhi

Not enough info.
The exception just states there were problems retrieving data from your data source.
Sincerely,
Ted Ueda

I have installed Creative Cloud Desktop but it fails to load. The icon shows up in the bar at the top right but then it just disappears. I am running Yosemite on a MacBook Pro.

I downloaded and installed Creative Cloud Installer and installed the Creative Cloud desktop on my MacBook Pro running Yosemite. The Creative Cloud desktop tries to install when the system starts and the icon actually shows in the top bar briefly and then disappears shortly after it shows up so it is obviously failing to load. I have tried multiple times to no avail.

do you mean in my system library? or where can I find it?
Am 05.03.2015 um 23:55 schrieb Jeff A Wright <[email protected]>:
I have installed Creative Cloud Desktop but it fails to load. The icon shows up in the bar at the top right but then it just disappears. I am running Yosemite on a MacBook Pro.
created by Jeff A Wright <https://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7257828#7257828>
Vanb38462666 or Daniel do either of you have a Library/Input Managers folder? If so what do you have inside that folder?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7257828#7257828 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7257828#7257828
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email <mailto:[email protected]software.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 71>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

The Module DLL D:\Microsoft\Exchange Server\V14\Bin\kerbauth.dll failed to load. The data is the error.

Hi,
I keep receiving an error message in the Event Logs for Exchange 2010:
The Module DLL D:\Microsoft\Exchange Server\V14\Bin\kerbauth.dll failed to load. The data is the error.
Event ID: 2280 - IIS-W3SVC-WP
OWA is working.
In IIS- HTTP Redirect is Disabled On the Default Website.

Hi
   According to your error, the path is incorrect or dll file is corrupted.
   You can modify file “\Windows\System32\inetsrv\config\applicationHost.config”
    please check this sentence
   <add name=”kerbauth” image=”D:\Exchange,Server\V14\Bin\kerbauth.dll” />
   Can you find kerbauth.dll in this path?
   If you can find this dll, please copy same dll from other exchange system and replace of it.
If you can’t find it, please modify path.
Terence Yu
TechNet Community Support

Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

I get this error when installing VS 2015 Community RC. I'm installing on Windows 10 build 10074. I tried uninstalling VS and tried performing the steps from other known issues... Change > Custom > Select feature > Update.
I also get the other errors as well...
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Same issue here, on a Surface Pro 3.
I've tried all I can think of, including a full reinstall of the OS (10074). Basically it always fails with the errors below.
Launching VS I do have the UAP templates installed, but not the emulators. I can create a new Windows Universal app no problem, however it shows up as a Windows 8.1 type in the properties pane. Missing lots of references so obviously nothing builds.
Tried installing the tools separately (the ones linked by Paul Chapman in a separate thread). These installed fine, and gave me the emulators (at least in the drop down, haven't been able to verify they work as nothing else works). Proceeded to "repair"
the VS install after this and at that point the install completed without errors, however nothing still works inside VS. Then proceeded to "modify" and remove any Universal app stuff, rebooted and reinstalled, only to get the same error again and
back at square one.
Tried, as far as I can remember, fresh installs from both the ISO and webinstaller (as there was some talk about the ISO containing older code and missing some tools).
Spent a week trying to get a Win10 rig up now, to no avail. Previous builds (with CTP6) would give me a UAP mobile install error, which seemed linked to Hyper-V not working, however Hyper-V was working just fine...
Oh, and obviously - No, I did not cancel the install myself.
Here are some relevant lines from the install log,
[060C:0CF0][2015-04-30T14:20:08]i000: MUX: Source confirmed
[060C:1994][2015-04-30T14:20:14]i000: MUX: Finished connecting secondary installer pipe
[060C:14D4][2015-04-30T14:20:19]i000: MUX: Updating secondary installer progress display name: Windows 10 SDK 10.0.10069
[060C:14D4][2015-04-30T14:20:25]i000: MUX: Updating secondary installer progress display name: Tools for Windows 10 Universal Apps (Windows SDK 10.0.10069)
[060C:044C][2015-04-30T14:28:13]i000: MUX: ExecuteError: Package (VSSecondaryInstaller_box) failed: Error Message Id: 1603 ErrorMessage: Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Process returned error: 0x80048646
[0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to execute EXE package.
[060C:044C][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to configure per-machine EXE package.
[060C:044C][2015-04-30T14:28:48]i000: MUX: Installation size in bytes for package: VSSecondaryInstaller_box MaxAppDrive: 0 MaxSysDrive: 2063301632 AppDrive: 0 SysDrive: 2060471296
[060C:044C][2015-04-30T14:28:48]i000: MUX: ExecutePackageComplete for secondary installer
[060C:044C][2015-04-30T14:28:48]i000: MUX: Disconnecting secondary installer pipe
[060C:044C][2015-04-30T14:28:48]i000: MUX: Return Code:0x80048646 Msi Messages:Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294 Result Detail:0 Restart:None
[060C:044C][2015-04-30T14:28:48]i000: MUX: Set Result: Return Code=-2147187130 (0x80048646), Error Message=Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294, Result Detail=, Vital=False, Package
Action=Install, Package Id=VSSecondaryInstaller_box
[060C:044C][2015-04-30T14:28:48]i000: Setting string variable 'BundleResult' to value '0'
[060C:044C][2015-04-30T14:28:48]w350: Applied non-vital package: VSSecondaryInstaller_box, encountered error: 0x80048646. Continuing...
Think I'll go buy a Mac...

Known Issue: Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Some users are receiving the following errors after Visual Studio setup completes
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Windows 10 SDK 10.0.10069 : The installer failed. User cancelled
installation. Error code: -2147023294

We've fixed this issue, and have released an update as of 7PM PDT 30 April 2015.
New installs of Visual Studio 2015 RC should expect to no longer encounter this problem, unless
you lose your internet connection during installation. (That is, this error now indicates that the Windows SDK or Windows Emulator setup invoked by Visual Studio setup has lost internet connectivity and cannot download necessary files.)
To fix the issue, re-run setup and select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile" again.
If you have already installed Visual Studio and encountered this problem, you can now modify your Visual Studio installation to successfully install.
Go to Program & Features, select Visual Studio 2015 RC, and select Change. Click
Modify, then select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile", and click
Update.
Note that "Universal Windows App Development Tools" will be already selected. This is expected. Keep it selected, and click
Update.
An alternate solution is to install the Windows 10 SDK and Windows Emulators separately. Go to
https://dev.windows.com/downloads/windows-10-developer-tools. Scroll to the bottom of the page and install
the Windows 10 SDK and Windows 10 emulators outside of Visual Studio setup.
Thanks!
-Paul

A required application library failed to load and the product cannot continue

Seems like I go through this problem time and again with Photoshop + Acrobat CS2 and still have yet to resolve a way of fixing it short of completely wiping my drive and re-installing Windows (XP Pro) The error is "application library failed to load and the product cannot continue"
If there is anyone out there that has figured out a way to fix this issue please fill me in.
This time I went as far as a complete and though removal of all Adobe products from the system and the registry and then completely reinstalled the product.
I have forgone purchasing CS3 because of this issue as I am 99% sure that it has still not been resolved.
Basically Photoshop and Acrobat are useless at this point and I am using an old version of Picture Publisher and Macromedia Fireworks to complete my work. This I assume is good advertising for Adobe :)
Anyone have any ideas????
See this post in the forum "could not complete your request because of a program error", PDF format, cs2, xp" as this is an ongoing Adobe issue that they have completely blown off!
I am working on
Adobe Photoshop Version: 9.0.2 (9.0.2x296)
Operating System: Windows XP
Version: 5.1 Service Pack 2
System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
Physical processor count: 1
Processor speed: 2798 MHz
Built-in memory: 2559 MB
Free memory: 1812 MB
Memory available to Photoshop: 1758 MB
Memory used by Photoshop: 55 %
Image cache levels: 6
Serial number: XXXXXXXXXXXXXXXXXX (I have a legal copy)
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS2\
Temporary file path: C:\DOCUME~1\JIMSHE~1\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 128.0G, 65.5G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS2\Plug-Ins\
Additional Plug-ins folder: not set
Installed plug-ins:
ADM 3.10x21
ASDStrm 1.03x2
Accented Edges 9.0
Angled Strokes 9.0
Average 9.0 (9.0x196)
BMP 9.0 (9.0x196)
Bas Relief 9.0
Camera Raw 3.7
Chalk & Charcoal 9.0
Charcoal 9.0
Chrome 9.0
Cineon 9.0 (9.0x196)
Clouds 9.0 (9.0x196)
Color Halftone 9.0 (9.0x196)
Colored Pencil 9.0
CompuServe GIF 9.0 (9.0x196)
Conditional Mode Change 9.0 (9.0x196)
Contact Sheet II 9.0 (9.0x196)
Conté Crayon 9.0
Craquelure 9.0
Crop and Straighten Photos 9.0 (9.0x196)
Crop and Straighten Photos Filter 9.0 (9.0x196)
Crosshatch 9.0
Crystallize 9.0 (9.0x196)
Cutout 9.0
Dark Strokes 9.0
De-Interlace 9.0 (9.0x196)
Difference Clouds 9.0 (9.0x196)
Diffuse Glow 9.0
Displace 9.0 (9.0x196)
Dry Brush 9.0
Embed Watermark 1.70.19
Export Transparent Image 9.0 (9.0x196)
Extract 9.0 (9.0x196)
Extrude 9.0 (9.0x196)
FastCore Routines 9.0 (9.0x196)
Fibers 9.0 (9.0x196)
Film Grain 9.0
Filmstrip 9.0 (9.0x196)
Filter Gallery 9.0
Fit Image 9.0 (9.0x196)
Fresco 9.0
Generic EPS 9.0
Glass 9.0
Glowing Edges 9.0
Grain 9.0
Graphic Pen 9.0
HDRMergeAlign 9.0x001
HDRMergeUI 9.0x001
Halftone Pattern 9.0
Ink Outlines 9.0
Lens Blur 9.0
Lens Correction 9.0
Lens Flare 9.0 (9.0x196)
Lighting Effects 9.0 (9.0x196)
Liquify 9.0
MMXCore Routines 9.0.1 (9.0.1x289)
Merge to HDR 1.0x001
Mezzotint 9.0 (9.0x196)
Mosaic Tiles 9.0
Multiprocessor Support 9.0 (9.0x196)
NTSC Colors 9.0 (9.0x196)
Neon Glow 9.0
Note Paper 9.0
Ocean Ripple 9.0
OpenEXR 9.0 (9.0x196)
PCX 9.0 (9.0x196)
PNG 9.0 (9.0x196)
PNG Icons 1.22x1
Paint Daubs 9.0
Palette Knife 9.0
Patchwork 9.0
Paths to Illustrator 9.0 (9.0x196)
Pattern Maker 9.0 (9.0x196)
Photo CD 9.0 (9.0x196)
Photocopy 9.0
Photomerge 9.0 (9.0x196)
PhotomergeCylmap 9.0 (9.0x196)
PhotomergeRender 9.0 (9.0x196)
PhotomergeUI 9.0 (9.0x196)
Picture Package 9.0 (9.0x196)
Picture

John,
foud your message very helpfull. I experience the same problem when strating a CS2 program (Photoshop, Indesign,...) over a terminal server connection.
It's weird because starting more than one instance is possible (despite what's written in the article ) as long as the users have administrative rights. I've encountererd this problem because my daughter of 11 wants to use Photoshop now. I have a terminal server set up so the kids may experiment with their own desktops whithout the risk to screw it up and because I can access all my programs from wherever I want.
But as I found out now I must buy volume licensing instead of retail (even if it's for just one instance...)
Want to know if possible how "difficult" it was to change your retail to a volume licensed version? Did you have to pay the full amount again? Hope an upgrade exist from Creative Suite CS2 - retail to Creative suite CS3 - volume licensed for the same price as from retail to retail... Or am I hoping to much?
Kind regards and thanks for your info,
Patrick

Export Release Build Flash Builder 4.5 fails to load over the web.

Exported Release Build Application fails to load over the web. You can reproduce using the following steps:
1. Create New Flex Project in Trial Flash Builder 4.5.
2. Use the default Flex 4.5 sdk.
3. Configure as a web application.
3. Place the following MXML code in the main application file:
<?xml version = "1.0" encoding = "utf-8"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
xmlns:s = "library://ns.adobe.com/flex/spark"
xmlns:mx = "library://ns.adobe.com/flex/mx"
minWidth = "955"
minHeight = "600">
<fx:Declarations>

</fx:Declarations>
<s:TextArea text = "Hello World!" width = "100%" height = "100%">
</s:TextArea>
</s:Application>
3. Save the main application file and Export Release Build to bin-release.
4. Place all files in bin-release on IIS web server in a web accessible location.
5. Go to the web accessible location in any browser with newest flash player and view the application's html page.
Actual Results:
Flash movie appears blank. Context menu shows Movie Not Loaded. Network traffic shows application main swf downloaded. Framework dependent swfs not downloaded.
Expected Results:
Movie loads. Hello World! appears in text box. Context menu does not show Movie Not Loaded. Framework dependent swfs downloaded.
Workaround (if any):
Deploy on an Apache web server.
The tests were run on IIS 7.x (7.0 for one, and 7.5)
Flex application was built using Flex 4.5.0 SDK pre-bundled release (built-in flex 4.5 with Flash Builder 4.5 trial) on Mac OS X 10.6.7 (10J869)
Flash Player 10.3.181.14
Example failing website:
http://staging.ibenergy.com/Test.html
Any idea as to why my exported release build fails? Any help would be appreciated.

Just tried this out on an IIS server with Flash player 10.3.181.14 - it worked.
Are you using the release version of Flash Builder 4.5 with the release version of Flex SDK (not a prior SDK build)?
The URL you mentioned gives me a 403 forbidden error.
-Anirudh

Failed to load resource: the server responded with a status of 404 (Not Found)

I uploaded 2 x small Wordpress sites to Azure this morning using the local Git repository on my iMac. They worked fine when I checked them earlier and now I see the websites are not loading correctly with 30+ errors on each effecting all .css, .js and
.jpg files - using view source, these are the error messages.
Failed to load resource: the server responded with a status of 404 (Not Found)
When I open the web root in my ftp client the files are definitely there as you would expect. I am using Azure Small Basic Hosting, any thoughts on what has gone wrong and how to fix the websites?
Site 1: http://goo.gl/VONbHc
Site 2: http://goo.gl/wdTP67
Liam

Hi,
I tested your site 1, when I open http://goo.gl/VONbHc, it direct me to
http://templestudios.azurewebsites.net/ ,so I think you create templestudios as your azure website name. it seems that the page will go directory to another page, one image html code as below.
<img width="300" height="225" title="Portrait Photography" class="thumb wp-post-image" alt="Portrait Photography" src="http://www.photostudio.ie/wp-content/uploads/portrait-girl-dublin-300x225.jpg">
The image was not found seems more relate to
http://www.photostudio.ie , I open this site, contents are as following screenshot.
Hope this helps
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Failed to load database information. Error in File ReportName {E420E88A-5947-4925-844E-75E6311D3EB3}.rpt: Failed to load database information.

Hi All,
We've been running CR for VS2010 for a number of years in our web app without any issues. Using the same code we recently upgraded our application to support x64 and we have run into this error on our QA servers:
Failed to load database information. Error in File ReportName{Guid}.rpt. Failed to load database information.
Here's are server setup:
Windows Server 2012 Datacenter x64
SAP Crystal Reports Runtime Engine for .Net Framework (64-bit)
IIS 8
Database Server
Oracle 12c
Interestingly, Crystal Reports works fine on our dev machines and it also works on our dev machines if I connect to the QA Database server directly. So I've ruled out any Oracle issues.
I believe the permissions are set up correctly for CR to run, but I'd like to know what permission CR needs to run. I can't find a definite answer reading the forum posts or on the WIKI.
I've used Process Monitor and there seems to be some permission issues with the uf12manager.DLL. See attached document.
I'm really stuck here and any help is appreciated.
Thanks!

Nothing to do with UFL manager, that may be a missing dependency.
Search on a kbase on how to enable crlogger, that may tell you what is failing.
Typical Oracle issues on a 64 bit app is I believe you need to install the Oracle 64 bit Client and then 32 bit client.
Do we support Oracle 12? No we don't...
See this PAM for more info:
SAP Crystal Reports 2011 Product Availability Matrix (PAM)
Open the link for the Database connectivity....
Don

Failed to load database information. Error in {GUID}.rpt

Hi
I have a C# windows service that load a rpt file and export it to PDF
I am required to use XML as data source for the rpt file, and in the IDE of CR 2013 it always works fine via local XML file, and also I create a http/https pages which returns a XML stream, it still works, preview fine.
And then I debug into my unit test project, load the rpt file, set the necessary parameters, and at last call the ReportDocument.Export(), the PDF was generated successfully.
But when I deploy the windows service in my local machine, it always throw out an exception with the error message of “Failed to load database information. Error in {GUID}.rpt” at ReportDocument.Export().
Here is the environment of my local machine:
    Windows 7 (64 bit)
    NET framework 4.0 / VS2010 build with “Any CPU”
    CR2013 with the latest run-time packages for VS
    I also have crdb_xml.dll in both of the following paths:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86
I doubt that I missed something in my environment, is there any suggestions? Thanks a lot!

Thank you for your advice!
I have deployed the crdb_xml driver as the steps mentioned in your links, it resolved previous error. Thanks a lot!
But now I encountered another problem, ok, here is my work flow:
1. I create two separate .net pages which return xml stream for my report file, one for main report and the other for the sub report. And these pages need to pass parameters.
2. I create http/https URL xml data source for both the main report and sub report, also I added the parameters in the end of my creation by @prompt function.
3. Then I preview my report, enter the necessary parameters in the pop-up window, and click “OK”, the xml data returned from my URL and displayed correctly in my report.
4. Then I test into my windows service:
1) Create an object of CrystalDecisions.CrystalReports.Engine.ReportDocument() named rptDoc to load my report file.
2) Set parameters to rptDoc via the function of rptDoc.SetParameterValue()
3) Apply my logonInfo and attributes information
4) rptDoc.Export().
Then I got my problem, the parameters did not send to my .net pages all the while, but it is worked fine if I previewed the report in CR 2013 design tool.
Is it the problem that I missed some settings in my .net code or any way CrystalReport.Engine did not support to pass parameters to a report with http/https xml data source?
I am blocked by this issue, any suggestion? Thanks!
For your reference, here is the .net page which is trying to catch the parameters
foreach (var item in Request.Params)
paramsList.Add(item.ToString());
                ExceptionManager.InsertException(new Exception(string.Join(",", paramsList)));
                BrokerEntity broker = null;
                string ifpPSID = Params.ReplaceNullWith(Request["@IFPPSID"], Null.NullString).ToString();
When preview the report in CR 2013 design tool, we get following string for “Request.Params”
“@IFPPSID,ASP.NET_SessionId,ALL_HTTP,ALL_RAW,APPL_MD_PATH,APPL_PHYSICAL_PATH,AUTH_TYPE,AUTH_USER,AUTH_PASSWORD,LOGON_USER,REMOTE_USER,CERT_COOKIE,CERT_FLAGS,CERT_ISSUER,CERT_KEYSIZE,CERT_SECRETKEYSIZE,CERT_SERIALNUMBER,CERT_SERVER_ISSUER,CERT_SERVER_SUBJECT,CERT_SUBJECT,CONTENT_LENGTH,CONTENT_TYPE,GATEWAY_INTERFACE,HTTPS,HTTPS_KEYSIZE,HTTPS_SECRETKEYSIZE,HTTPS_SERVER_ISSUER,HTTPS_SERVER_SUBJECT,INSTANCE_ID,INSTANCE_META_PATH,LOCAL_ADDR,PATH_INFO,PATH_TRANSLATED,QUERY_STRING,REMOTE_ADDR,REMOTE_HOST,REMOTE_PORT,REQUEST_METHOD,SCRIPT_NAME,SERVER_NAME,SERVER_PORT,SERVER_PORT_SECURE,SERVER_PROTOCOL,SERVER_SOFTWARE,URL,HTTP_CONNECTION,HTTP_ACCEPT,HTTP_HOST,HTTP_USER_AGENT,HTTP_FRONT_END_HTTPS”
When run in windows service, we get following string without parameters “@IFPPSID”
“ASP.NET_SessionId,ALL_HTTP,ALL_RAW,APPL_MD_PATH,APPL_PHYSICAL_PATH,AUTH_TYPE,AUTH_USER,AUTH_PASSWORD,LOGON_USER,REMOTE_USER,CERT_COOKIE,CERT_FLAGS,CERT_ISSUER,CERT_KEYSIZE,CERT_SECRETKEYSIZE,CERT_SERIALNUMBER,CERT_SERVER_ISSUER,CERT_SERVER_SUBJECT,CERT_SUBJECT,CONTENT_LENGTH,CONTENT_TYPE,GATEWAY_INTERFACE,HTTPS,HTTPS_KEYSIZE,HTTPS_SECRETKEYSIZE,HTTPS_SERVER_ISSUER,HTTPS_SERVER_SUBJECT,INSTANCE_ID,INSTANCE_META_PATH,LOCAL_ADDR,PATH_INFO,PATH_TRANSLATED,QUERY_STRING,REMOTE_ADDR,REMOTE_HOST,REMOTE_PORT,REQUEST_METHOD,SCRIPT_NAME,SERVER_NAME,SERVER_PORT,SERVER_PORT_SECURE,SERVER_PROTOCOL,SERVER_SOFTWARE,URL,HTTP_CONNECTION,HTTP_ACCEPT,HTTP_HOST,HTTP_USER_AGENT,HTTP_FRONT_END_HTTPS”

Failed to load Sorce Model: Encoding or code set not supported

Hello,
I have tried to migrate an informix-db with error "Failed to load Sorce Model: Encoding or code set not supported".
Informix: 7.3.1
Unix: Reliant-Unix 5.45
Repository: Oracle 8.1.7 (64bit) EE [tested with the same output 8.1.6]
Unix: Reliant-Unix 5.44
error.log:
** Oracle Migration Workbench
** Release 2.0.2.0.0 Production
** ( Build 20011121 )
** ORACLE_HOME: D:\wntapp\omwb
** user language: de
** user region: DE
** user timezone: ECT
** file encoding: Cp1252
** java version: 1.1.8.10
** java vendor: Oracle Corporation
** o.s. arch: x86
** o.s. name: Windows NT
** o.s. version: 4.0
** Classpath:
D:\wntapp\omwb\Omwb\olite\Oljdk11.jar;D:\wntapp\omwb\Omwb\olite\Olite40.jar;C:\Programme\Oracle\jre\1.1.8\lib\rt.jar;C:\Programme\Oracle\jre\1.1.8\lib\i18n.jar;D:\wntapp\omwb\Omwb\jlib;D:\wntapp\omwb\Omwb\jlib\Omwb.jar;D:\wntapp\omwb\jlib\oembase-9_0_1.jar;D:\wntapp\omwb\jlib\netcfg.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer6.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer7.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer2K.jar;D:\wntapp\omwb\Omwb\plugins\Sybase11.jar;D:\wntapp\omwb\Omwb\plugins\Sybase12.jar;D:\wntapp\omwb\Omwb\plugins\MSAccess.jar;D:\wntapp\omwb\Omwb\plugins\MySQL.jar;D:\wntapp\omwb\Omwb\drivers\mm.mysql.jdbc-1.2a;D:\wntapp\omwb\Omwb\plugins\Informix7.jar;D:\wntapp\omwb\Omwb\drivers\ifxjdbc.jar;D:\wntapp\omwb\lib\xmlparserv2.jar;D:\wntapp\omwb\rdbms\jlib\xsu111.jar;D:\wntapp\omwb\jdbc\lib\classes111.zip;D:\wntapp\omwb\lib\vbjorb.jar;D:\wntapp\omwb\jlib\ewt-swingaccess-3_3_18.jar;D:\wntapp\omwb\jlib\ewt-3_3_18.jar;D:\wntapp\omwb\jlib\ewtcompat-3_3_15.jar;D:\wntapp\omwb\jlib\share-1_1_9.jar;D:\wntapp\omwb\j
lib\help-3_2_9.jar;D:\wntapp\omwb\jlib\ice-5_06_3.jar;D:\wntapp\omwb\jlib\kodiak-1_2_1.jar
** Started : Mon Feb 18 13:39:24 CET 2002
** The following plugins are installed:
** Informix Dynamic Server 7.3 Release 2.0.2.0.0 Production
EXCEPTION : LoadTableData.run() : IDS7_SYSCOLUMNS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTABLES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSUSERS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSBLOBS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSVIEWS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCOLDEPEND Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSREFERENCES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSOBJSTATE Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTRIGGERS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTRIGBODY Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSSYNONYMS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSSYNTABLE Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSDEFAULTS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCONSTRAINTS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCHECKS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSPROCEDURES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSINDEXES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTABAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSROLEAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSPROCAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCOLAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSPROCBODY Encoding or code set not supported.
Please help.
Thanks
G. Grosche

Looks like this error is comming from the Informix JDBC Driver.
what version of the JDBC Driver are you using and is there anything special
about the character set you used to create your database?
Can you build a simple Java app to connect to the same database with the same JDBC Driver?
Jim.

Failed to load to the desktop (error code 1)

Similar Messages

Maybe you are looking for