Failed to log accounting packet to any logging destination

Does anybody knows the explanation of the expresion: "failed to log accounting packet to any logging destination"
Any reference to documentation, internet links, etc. helpful to understand if i have a problem or not would be very grateful.
(I have running acs 4.1 in a windows server)
Thanks
pere

Sounds like the CSLog service is broken or you're using remote logging and it couldn't reach any of the remote servers.
CSLog has a number of plug-in "targets" eg CSV, remote agent, ODBC etc. If it doesnt achieve at least one success it will generate the error you are seeing.
In short your log data is going into a black hole never to be seen again.

Similar Messages

An account failed to log on unknown username or password. Causing Login audit failures

I have a SBS11 Essentials server that is getting audit Failures over and over again. There computer account says it's the SBS11 server it's self. It says unknown user name or bad password. I have checked for scheduled tasks, backup jobs, services and
non of them are using any special user accounts. I have used MS network monitor and can't find anything helpful to lead to the issue. All computers in the network are running Windows 7. The domain functional level is 2008 R2.
I get a the 4768 event ID about a Kerberos event and then just after I get a Event ID 4625 account failure with Logon Type 3. I have includes the events below. I need to figure what is causing the audit failures as my GFI Test Hacker alert is
catching it every morning. Disabling the Test Hacker alert is not a option. I have used Process Explorer also but can't seem to pin it down. I also enabled Kerberos logging.
http://support.microsoft.com/kb/262177?wa=wsignin1.0. All event codes state its a unknown or no existing account but how do I stop it from happening?
This is from the System Event log
A Kerberos Error Message was received:
on logon session TH.LOCAL\thsbs11e$
Client Time:
Server Time: 14:59:53.0000 3/4/2014 Z
Error Code: 0x6 KDC_ERR_C_PRINCIPAL_UNKNOWN
Extended Error:
Client Realm:
Client Name:
Server Realm: TH.LOCAL
Server Name: krbtgt/TH.LOCAL
Target Name: krbtgt/[email protected]
Error Text:
File: e
Line: 9fe
Error Data is in record data.
This is from the Security Event log
A Kerberos authentication ticket (TGT) was requested.
Account Information:
Account Name: S-1-5-21-687067891-4024245798-968362083-1000
Supplied Realm Name: TH.LOCAL
User ID: NULL SID
Service Information:
Service Name: krbtgt/TH.LOCAL
Service ID: NULL SID
Network Information:
Client Address: ::1
Client Port: 0
Additional Information:
Ticket Options: 0x40810010
Result Code: 0x6
Ticket Encryption Type: 0xffffffff
Pre-Authentication Type: -
Certificate Information:
Certificate Issuer Name:
Certificate Serial Number:
Certificate Thumbprint:
Certificate information is only provided if a certificate was used for pre-authentication.
Pre-authentication types, ticket options, encryption types and result codes are defined in RFC 4120.
I then get teh following error in the next event
An account failed to log on.
Subject:
Security ID: SYSTEM
Account Name: THSBS11E$
Account Domain: TH
Logon ID: 0x3e7
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name:
Account Domain:
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x25c
Caller Process Name: C:\Windows\System32\lsass.exe
Network Information:
Workstation Name: THSBS11E
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process: Schannel
Authentication Package: Kerberos
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.

Well I opened the case for him and he never followed up with Microsoft :-(
It's a kerberos issue, we're told to ignore it. Would you be willing to be patient and stubborn and work with CSS to at least understand what's going on better? I can tell you it's normal with Essentials but not the exact technical reason it's
happening.
Unfortunately TechNet isn't coming back, sorry folks :-(

SCOM 2012: An account failed to log on. EventID 4625

I don't no, why my service account failed to log on to the reporting service. Username and password are correct.
Account For Which Logon Failed:
   Security ID:       NULL SID
   Account Name:       svcSCOM
   Account Domain:        12345
Failure Information:
   Failure Reason:       Unknown user name or bad password.
   Status:           0xc000006d
   Sub Status:       0xc000006a
Process Information:
   Caller Process ID:   0xb34
   Caller Process Name:   C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\bin\ReportingServicesService.exe
The SQL Services on this server are running this account without errors. It doesn't matter if I choose local system account or my scom service account.
Any help is appreciated :-)
Best regards,
Daniel

Hi,
According to the error message and its sub status, it seems like that user name is correct but the password is wrong.
I would like to suggest you reset the account password and re-enter it for all those services that run under the account.
Regards,
Yan Li
Regards, Yan Li

How do I prevent "The user profile service service failed the log on" error messages?

I work for an organization with approximately 60 staff members across ~80 Windows 7 Professional PCs. Users log in with Active Directory accounts.
Approximately once per month, a random user will get an error message while attempting to log into their machine that says "The user profile service service failed the log on." The solution to resolve this issue is here: http://support.microsoft.com/kb/947215?ppud=4&wa=wsignin1.0.
The problem is that I want to PREVENT this issue from happening, as it is incredibly inconvenient for the user. I had one staff member board a 5-hour plane trip expecting to do work, and once she got in the air she logged in and
received the error message and was unable to use her computer for the trip. I've had others locked out of their computer with deadlines to get things done, while I am at home off the clock. Editing the registry is not an easy fix, and so it's not something
I can just post instructions for in a knowledgebase article.
Does anyone know how to prevent this issue from occurring? I believe that it has something to do with a network-based startup script, or a service trying to connect to our file server, or the computer trying to connect to our ad server. All of these
are blocked by firewalls (unless the user is off-site), and I suspect that the services may be timing out, causing the user profile service service failed the logon error message, but I can't seem to eliminate it, after nearly a year of trying.
90% of the time this problem occurs when the user is off-site, but it has happened while the user is in the office too. Once the user gets this error message, the only way to resolve the problem is to log into their computer as a localadministrator account
and perform the method #1 fix in the knowledgebase article.
Thanks

Have you checked the logged files in event viewer around the time when problem occurred?
Is there any suspicious events like error or warning related to this issue.
Try run Active Directory Best Practice Analyzer:
http://technet.microsoft.com/en-us/library/dd759260.aspx

The user profile service: Service failed the log on. User profile can not be loaded.

I am running a Windows Server 2008 R2 domain. with 2 domain controllers.
Every new account created in active directory does not seem to work. Even if the account it copied from one that does still work, it still gives the same error when logging in on a network computer (windows 7). "The user profile service: Service failed
the log on. User profile can not be loaded."
I have looked at http://support.microsoft.com/kb/947215, which unfortunately does not help. Especially since the SID is not there because the user has not managed to log on yet.
The
"Do not logon users with temporary profiles" Group Policy setting is not configured.
And I have tried force replication too.
I have exhausted all my knowledge.
Please help
Regards
Phil

It might be that the default user profile is corrupted. See that: https://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

G5 fails to log into network

this has happened a few times now and is getting a little more freguent.
When i boot up, i log into my wireless network. All the computers are configured to join the network automatically.
However, for a reason i can't seem to find, from time to time my G5 fails to log into the network. if i click on the airport menu icon (which shows no bars/waves - just grey) i can see the network. if i now try to join the network, it asks for the password. the correct password is given, but i am rejected from the network.
if i then log out and back in, the G5 joins no problem. i have now just taken to logging out and back in.
any ideas?

No ideas, but confirmation that it happens when I cold boot or wake the G5 from a long sleep. Otherwise, it joins the preferred network automatically at login, as it's supposed to.

WebClient Error - Failed to log on to the comm. mgmt. software

Hi, following the CR410 i have created a webclient profile/ framework, and assigned the profile to an org unit.
now when try to open the webclient using crm_ic, i am getting the above error on the IDES system.
<b>"Failed to log on to the communication management software system"</b>
<b>Details of the above error</b>
Diagnosis
An error occurred while logging in to the communication management software system.
System Response
The multichannel services are not available. You will not be able to work with contacts such as phone calls, e-mails, or chat sessions.
Procedure
Contact your system administrator.
Procedure for System Administration
Review the ICI trace.
what could be error...
Thanks,

Have you configured CTI with IC WebClient? If yes under IC WebCLient profile look for CONTACTCENTER function profile and enter correct profile.
If you do not have CTI in place make sure that CONTACTCENTER entry is blank under IC WebClient profile.
Thanks,
Thirumala.

Satellite L450 - The user profile service failed the log on

Hi
I have a Toshiba Satellite L450 and I have had it for a while now and this has never happened before, when I turn it on it goes through the usual and then comes up with my name and a box for me to type my password, as normal. But when I put my password in it says:
The user profile service failed the log on
User profile cannot be loaded
The only option I have is to log off and when I do it takes me back to the password bit. If I put the password in wrong it tells me its wrong.....
Cant do anything with it, I have tried shutting down, etc....looked through the manual and cant see anything about it in there either.......... :(

Hi mate
Please attach to this Microsoft document:
+Error message when you log on to a Windows Vista-based or Windows 7-based computer by using a temporary profile: "The User Profile Service failed the logon. User profile cannot be loaded+
http://support.microsoft.com/kb/947215
It seems to be known issue to Microsoft. You have to use the FIX posted there.
Good luck

Unknown User in "Failed Attempts" Log

The "Failed Attempts" log on the ACS 4.1 began showing entries that I do not understand. The backend is Active Directory.
Basically, the entry it is in this format:
date,time,authen failed,foreigndomain\user,localadmingroupname,callerid,External DB user invalid or bad password,... etc.
This is what I don't understand: It appears that the "foreigndomain\user" entry must be a foreign device that is trying to authenticate to our wireless environment (PEAP). But why is it showing the group name as our ACS administrators group!? Shouldn't it see the "foreigndomain\user" as another group like "Default Group"? I have the "\Default" group mapping set to "Default Group".
Thank you.

we have a similar thing occur when a group mapping cannot be found, it logs the failed attempt against the first group in ACS.
Is "group 1" named "ACS administrators"?
I don't think it means much as I assume group mapping only occurs if an authentication attempt is successful?? It seems there is bug in that ACS needs to put something in the log entry for group and so uses the first group name rather than N/A, blank, or something to that effect.

My screen will not allow me to log in " User profile servc failed the log "

my screen will not allow me to log in it states " User profile servce failed the log in. User profile can not load"
This question was solved.
View Solution.

Hi,
You could try the following.
Shut down the notebook. Tap away at f8 as you start the notebook to enter Windows Recovery Console. Use the arrow keys to select Safe Mode and hit enter. If windows will load in this mode, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore. Pick a restore point at least 24 hours before the log-on issue and then proceed with the restore process. When complete, Windows will reboot as normal so check if you can now log in correctly.
Another option if the above does not help is as follows.
Shut down the notebook. Tap away at f8 as you start the notebook to enter Windows Recovery Console. Use the arrow keys to select 'Start Using Last Known Good Configuration' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Got 'bea.jolt.ServiceException: Data conversion failed; check log file'

Got CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Data conversion failed; check log file
when started PIA and login screen appeared.

What version of PeopleTools are you using? Have you looked at E-AS: Error "Cannot find or open field table. Maybe FIELDTBLS32 is not set properly" (Doc ID 660607.1) yet?

SQL 2008 R2 Management Tools Install Fails - The specified account already exists

Hello,
The installation SQL 2008 R2 Management Tools on a Windows 7 workstation fails with the error, The specified account already exists.
Below is the Summary Log.
Thanks.
Paul
Overall summary:
Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal):           -2068052700
Exit facility code:            1212
Exit error code:               1316
Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time:                    2014-10-20 09:02:16
End time:                      2014-10-20 09:05:57
Requested action:              Install
Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\sqlncli_Cpu64_1.log
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name:                  WS287
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x64
Process architecture:          64 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
Description:                   SQL Server Database Services 2008 R2
ProductName:                   SQL Server 2008 R2
Type:                          RTM
Version:                       10
SPLevel:                       0
Installation location:
\\SRVDIA18\MSSQL2008R2Install\x64\setup\
Installation edition:          STANDARD
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      False
AGTSVCACCOUNT:                 <empty>
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Manual
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASDOMAINGROUP:                 <empty>
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 *****
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\ConfigurationFile.ini
CUSOURCE:
ENABLERANU:                    False
ENU:                           True
ERRORREPORTING:                False
FARMACCOUNT:                   <empty>
FARMADMINPORT:                 0
FARMPASSWORD:                  *****
FEATURES:                      SSMS,ADV_SSMS
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 *****
HELP:                          False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS:              False
INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    <empty>
INSTANCENAME:                  <empty>
ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
ISSVCPASSWORD:                 *****
ISSVCSTARTUPTYPE:              Automatic
NPENABLED:                     0
PASSPHRASE:                    *****
PCUSOURCE:
PID:                           *****
QUIET:                         False
QUIETSIMPLE:                   False
ROLE:                          <empty>
RSINSTALLMODE:                 FilesOnlyMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 *****
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         *****
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 <empty>
SQLSVCPASSWORD:                *****
SQLSVCSTARTUPTYPE:             Automatic
SQLSYSADMINACCOUNTS:           <empty>
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  False
TCPENABLED:                    0
UIMODE:                        Normal
X86:                           False
Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Feature:                       Management Tools - Basic
Status:                        Failed: see logs for details
MSI status:                    Passed
Configuration status:          Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\SystemConfigurationCheck_Report.htm
The specified account already exists

There is definitely more amusing endeavours in this world, than trying to understand why an SQL Server install failed. The log files are verbose - but somehow the real information about what went wrong seems to be hiding. Never have proverb about not being
able to see the forest for all the trees felt more appropriate.
Nevertheless, this is where things go sour:
MSI (s) (F4:EC) [09:04:15:744]: Resolving source.
MSI (s) (F4:EC) [09:04:15:744]: Resolving source to launched-from source.
MSI (s) (F4:EC) [09:04:15:744]: Setting launched-from source as last-used.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SourceDir property. Its value is '\\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\'.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is '\\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\'.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{2180B33F-3225-423E-BBC1-7798CFD3CD1F}'.
MSI (s) (F4:EC) [09:04:15:744]: SOURCEDIR ==> \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\
MSI (s) (F4:EC) [09:04:15:744]: SOURCEDIR product ==> {2180B33F-3225-423E-BBC1-7798CFD3CD1F}
MSI (s) (F4:EC) [09:04:15:744]: SECREPAIR: CryptAcquireContext succeeded
MSI (s) (F4:EC) [09:04:15:744]: Determining source type
MSI (s) (F4:EC) [09:04:15:744]: Note: 1: 2203 2: \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\SQL ODBC Native Client 10 - 64bit.msi 3: -2147287038
MSI (s) (F4:EC) [09:04:15:744]: Note: 1: 1316 2: \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\SQL ODBC Native Client 10 - 64bit.msi
MSI (s) (F4:EC) [09:04:15:744]: SECREPAIR: Error determining package source type
MSI (s) (F4:EC) [09:04:15:744]: SECUREREPAIR: SecureRepair Failed. Error code: 524F91D34B8
MSI (s) (F4:EC) [09:04:40:775]: Product: Microsoft SQL Server 2008 R2 Native Client -- Error 1316. The specified account already exists.
What account? I supposed you have already asked yourself that and just shaken your head.
But there is another error code 2203, NET HELPMSG 2203 says "The password parameter is invalid." And I note that the source is apparently on a share.
So where is my guess: the MSI installer - which runs as a service, somehow does not have permissions to read the installation from the share. Or is trying to log on to the share with your username/password? No, I don't know, I am just speculating widely.
But my advice would be to copy the installation directory from the share to a local disk.
Maybe that CryptAcquireContext is significant as well - I don't know.
Oh, wait, here is something just before the section above in the log:
MSI (s) (F4:EC) [09:04:15:729]: Note: 1: 2205 2: 3: Environment
MSI (s) (F4:EC) [09:04:15:729]: Note: 1: 2228 2: 3: Environment 4: SELECT `Name`,`Value` FROM `Environment`,`Component` WHERE `Component_`=`Component` AND (`Component`.`Action` = 1 OR `Component`.`Action` = 2)
Action start 9:04:15: WriteEnvironmentStrings.
2205 is "The logon processor did not add the message alias." I see that in a successful log that I have, so that is probably benign. But 2228 seems to be
"There are too many names in the user accounts database."
Exactly what that means, I have no clue, but it could be a Windows problem.
Erland Sommarskog, SQL Server MVP, [email protected]

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

Authentication failed because Outlook doesn't support any of the available authentication methods.

When attempting to check and send email from my Mac via iCloud, I keep getting the error "Authentication failed because Outlook doesn't support any of the available authentication methods." I have change just about everything I can see available, but continue to get this message.
I am able to send email via iCloud using my .Me and .Mac adresses, and that tells me that it is not able to store "sent emails" on iCluud and will store them loaclly on my computer. I can handle this, but whem going to iCloud Web page haave nothing withing the "sent" mailbox.
Using OS 10.7.2, and Outlook 2011 version 14.1.3
Thanks in advance......

I got the following from the microsoft Web site. Also, the SMPT port must be overwriten. Use port 587
This article contains information about the compatibility of Microsoft Outlook for Mac 2011 and Apple iCloud. Outlook for Mac 2011 does not support Apple iCloud calendar (CalDAV) and contact (CardDAV) synchronization. Outlook for Mac 2011 does support iCloud Mail. For steps on how to configure your iCloud email account in Outlook for Mac 2011, go to the "More Information" section of this article.
To configure your Apple iCloud email account in Microsoft Outlook for Mac 2011, follow these steps:
Start Outlook 2011.
On the Tools menu, click Accounts.
Click the plus sign in the lower-left corner, and then select E-mail.
Enter your E-mail Address and Password, and then click Add Account.
Note: The new account will appear in the left navigation pane of the Accounts dialog box.
Enter one of the following in the Incoming server box:
mail.me.com (for me.com mail addresses)
mail.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Incoming server box.
Enter one of the following in the Outgoing server box:
smtp.me.com (for me.com mail addresses)
smtp.mac.com (for mac.com mail addresses)
Click to select Use SSL to connect (recommended) under the Outgoing server box.
After you have entered the incoming and outgoing server information, Outlook 2011 will start to receive your email messages.
Note: You can click Advanced to enter additional settings, such as leaving a copy of each message on the server.

Wrong Accounting Packet Counter !

Hi,
In our DSL Service provider, We use Cisco Routers as a BRAS for years.
recently I have noticed about an strength problem with accounting packets That I'm recieving from BRAS!
right now our AAA configuration for PPPOE is something like this:
1- when a User establishes his PPPOE session, BRAS send an accounting-start packet for that user.
2- every 5 minutes , BRAS sends an accounting-update (Interim-update) for that session.
3- when user terminates his PPPOE session , BRAS finaly sends accouting-stop packet.
In Normal situation , it works like a charm , but I have found that when a user's session terminates in 1 or 2 minutes (before receiving first Interim update), BRAS send a high number for Acct-Output-Octets and Acct-Input-Octets, that practically it's Impossible for a user to have a such traffic in less than 1 or 2 minutes.
most important thing is that , It's not happening all time !!!
Does anybody has any Idea about this issue?
Thanks in advance.
Nasser

PO was created with 3 line items with each line item having freight condition type FRB2 - Freight value
For first line item it is Rs.200 for 1,008 quantity
For Second line item it is Rs.300 for 7,200 quantity
For Third line item it is Rs.300 for 2,604 quantity
GR was done for 3rd line item for the entire PO quantity 2604, but the frieght value is flowing only Rs. 156.24
1) Material is valuated at Standard Price.
It is Valuated at MAP
2)Condition type- FRB2- Rs 300 is entered at the Header Level and it is marked as a Group condition because of which it got apportioned to all the line items in the Purchase Order.
It is entered line itemwise with Rs.300 to the third particular line item and there is wrong flow of freight value for other line items too in GR.
Is Freight Condition type is a header condition and also check is it a group condition ( in t.code: M/06)
It is a header condition but not group condition and the values for frieght were given line item wise.
Need help to resolve this.
Edited by: prashantatri on Sep 2, 2011 12:14 PM
Edited by: prashantatri on Sep 2, 2011 12:15 PM

Failed to log accounting packet to any logging destination

Similar Messages

Maybe you are looking for