Failed to login to Solaris

Hello,
I wonder why i always facing problem every morning on loging in to the Solaris8 using SunRay. It give me the messages ..
**MESSAGE**
"Remote host could not be access. The remote host name is valid,
but the remote host may not be running dtlogin (or other X
display manager)"
But everything will be fine again after rebooting the server, which claimed a normal reboot (#init 6) without doing any configuration.
Your help is appreciate. Thanks fist!

Similar Messages

Root password fails on auth to Solaris Management Console Server

I've setup Solaris 10 x86 on a VA linux 1220 server, all is good so far except when I try to create additional users. I am logged in as root, and the root password logs in to the CDE, but fails on authentication to Solaris Management Console Server when I try to use any of the management apps like computers and networks or Users. So I'm stalled at the point where I should be configuring the system. I have been very careful about typing in the password exactly as I use it in the login screen, but it never works in the System Management tools for This Computer. The password I'm using is 26 characters long, is it too long? Or is there a step I'm missing?
Thanks,
Brian

One of my famous guesses, but unless you changed the default password algorithm the maximum length of your password is 8 characters, when logging in on the console or desktop, anything typed after those eight characters will be ignored (unless this behaviour changed very recently).
Its possibly that SMC, and its server component WBEM does not ignore the extra characters, which could cause this behavior.
What happens if you try and login to SMC with the root user and only the first eight characters of your password?
Btw, if this was the problem i think there is a way to change the default crypto algorithm to something that supports more characters.
.7/M.

Auto login in Solaris 10

Hi all
I'm trying to establish auto login in Solaris 10, as a regular user or root. This is a personal testing machine, so security is not an issue.
I want to automatically login preferably in the shell mode, ( no GUI if it's possible ), otherwise I can login with GUI, no biggie.
From what I've found, it does not seem an easy job, given that my Solaris experience is somewhat limited, ( been working more on Linux ).
If I can get that going, I'd prefer to run a few scripts upon login, which I think I can do it.
So what steps must I go through to have auto login upon boot ? How hard is it ?
Appreciate any comments. Thanks
PS. Reposted, because I submitted my query in the wrong forum.
Add the line below, to */etc/inittab* file.
ip:1234:once:/full/path/to/scriptEdited by: mysol on Aug 4, 2009 4:12 PM
Edited by: mysol on Aug 4, 2009 4:15 PM

What do you mean by auto login?
Do you want to implement Integrated windows authentication in OIM Design console. If yes, then I don't think it's possible.
Post your requirement here so that ppl can help you out.

Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'

I want to grant permissions to all domain users to view reports on our Report Server. Domain users are able to access our Report Server URL and folder, but when they click on a report item they get an error message:
"Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'"
I'm using windows authentication and configured the local service account in SSReportS Config Manager as the credentials to connect to the Report Server DB.
Can someone please help how I should properly do this step by step to give all domain users permissions to view a report in SSRS?
Thanks much! - Rookie DBA

Hi IWAR,
The error message "Cannot open database "ReportServer" requested by the login. The login failed. Login failed for user 'USER LOGON'" means the user 'USER LOGON' does not have permissions to access the "ReportServer" database.
To fix this issue, please verify that the user has a valid database user login. For more details, please refer to the following steps.
In SQL Server Management Studio, open Object Explorer and expand the Databases folder.
Expand the database in which to create the new database user.
Right-click the Security folder, point to New, and then click User.
On the General page, enter a name for the new user in the User name box.
In the Login name box, enter the name of a SQL Server login to map to the database user.
Click OK.
Reference:
http://technet.microsoft.com/en-us/library/ms156468(v=sql.105).aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Deploy CR 10 from VS 2005 C# fails to login on 2nd try

Hi,
I'm new to CR and .NET in general, but I've got a working app on my development m/c. I built a setup project in .NET and deployed the app to our test lab.
From there I was able to generate a report on my first request, but when I returned to the dialog that I use to collect parms and select the report I need I fail to login the CR (Oracle).
To be clear, my app builds 4 different reports, from my m/c I ran successful display as many copies of those reports as I have tried. But, on the test lab m/c I can request any (1)one of the 4 reports, but as soon as I request a 2nd one the app fails with the Login failed message.
I've already included the CrystalReportsRedist2005_x85.msm merge module.
Anyone have any ideas about how to solve this problems
thanks.
Danny
For anyone dealing with connection problems and may be interested in how I've resolved my connection problems:
It turns out that the problem wasn't in CR10 or the setup project. It was with the ODBC connection to Oracle9i. My m/c has a later version of Oracle9i then the version on the m/c in the test lab (9.2.0.5.0 vs 9.2.01.0)
The the temp fix is to revise the SQLNET.ORA file. Eventually we will need to install Oracle patches to correct for the ORA-12154 TNS could not be resolved error. This is going to be necessary for all client m/c's before going live.
Good luck to anyone dealing with similar issues.
Danny

Hi!
I am having the same issue in Oracle Weblogic Server 10.3.0.
I resolved it by increasing the memory in the setDomainEnv.sh
MEM_ARGS="-Xms1G -Xmx1G"
export MEM_ARGS
MEM_PERM_SIZE="-XX:PermSize=384m"
export MEM_PERM_SIZE
MEM_MAX_PERM_SIZE="-XX:MaxPermSize=384m"
export MEM_MAX_PERM_SIZE
Anyway I don't know why this resolved it and why the exception is not a memory error. I have tested version 10.3.2 and it doesn't report this errors with the same memory assigned.

How to auto login in Solaris 10

Hi all
I'm trying to establish auto login in Solaris 10, as a regular user or root. This is a personal testing machine, so security is not an issue.
I want to automatically login preferably in the shell mode, ( no GUI if it's possible ), otherwise I can login with GUI, no biggie.
From what I've found, it does not seem an easy job, given that my Solaris experience is somewhat limited, ( been working more on Linux ).
If I can get that going, I'd prefer to run a few scripts upon login, which I think I can do it.
So what steps must I go through to have auto login upon boot ? How hard is it ?
Appreciate any comments. Thanks
P.S. Just noticed I might have posted in the wrong forum. Sorry !
Which forum should I post again ?
Edited by: mysol on Jul 20, 2009 10:44 AM

ZFS has not yet been integrated into Solaris 10...
At this time you need either the "Software Express for Solaris 2/06"
( http://www.sun.com/software/solaris/solaris-express/ ) or the
"Solaris Express: Community Release"
( http://www.opensolaris.org/os/downloads/on/ ) to play with ZFS.
.

The User Profile Service service failed to Login user Profile error in Windows 7 Home Premium

Hi,
I recently purchased a new Dell Inspirion 1564 Laptop which had Microsoft Windows 7 Home Premium 64-bit installed.
The hardware configuration is i5 core Processor, 4GB Ram , 320GB HDD and 512MB Graphics card.
Today morning, I couldn't login as the system returned the following error after I entered the password.
"The User Profile Service service failed to login.
User Profile cannot be loaded"
I couldn't login at all as i had not created any other user account, even the face recognition didn't work.
I had to restore my pc to the previous state. I believe this happened after the installation of Windows Malicious Software Removal Tool x64 - March 2010 (KB890830) update, not immeditately though as i used the system few times after the installation of this update.
Is this a bug? I cant imagine if this happens if I am about to give a presentation, its going to be disastrous!
Any help is appreciated
Avinash

I'm getting the same issue - I'm the IT Manager at a school where every student has a laptop (fujitsu tablet T4410). This occurs to at least one new student every day. I have been unable to re-create the issue on demand, although I suspect it occurs when a temporary user profile gets created after the logon process takes too long (due to some disk activity, possibly related to windows updates or some thing). When we were creating student accounts on the machines, this would occur if we attempted to log in the newly created account before the computer had 'settled down' - it seems that there is a logon timeout, after which something stops working. If the new user's first logon happened too soon after booting, the profile would be corrupted. But this doesn't quite explain why it occurs seemingly randomly now.
My current solution is to boot into safe mode, back up the user's files, delete the account, create it again (the other suggested solutions on the internet did not work)
If you're desperate, you can log in while in safe mode, and use that to create a new account.
In any case, this is proving a very bad experience of Windows 7 for my students, and I hope to see a more useful fix for this soon.

Failed to login B1i server

Hello,
I installed B1 integration components successfully and enabled Cockpit in SAP B1. The Dashboards working fine on server and clients. But sometimes (not always) I get the error below when login SAP B1:
Cannot connect to SAP Business One Integration Service. In the Microsoft Services window, make sure this service is running.
and dashboards don't work.
it seems that it is due to timeout. I get the error below in logs file:
2015-03-20 14:17:55,521 [1] ERROR SAP.BusinessOne.WebBridge.B1iConnector - Failed to login B1i server; Response detail: {
"Status": 0,
"Headers": null,
"Cookies": null,
"Body": "The operation has timed out"
When the dashboards work I get the info. below in the same logs file:
2015-03-24 12:06:18,293 [1] INFO SAP.BusinessOne.WebBridge.ConnectorBase - set cookie: url=HTTPS://<server_name>:8443/B1iXcellerator/exec/ipo/vP.001sap0004.in_HCSX/com.sap.b1i.vplatform.runtime/INB_HT_CALL_SYNC_XPT/INB_HT_CALL_SYNC_XPT.ipo/proc, key=JSESSIONID, value=B5E9544EEFDF8B38E5036C2D941F9F17, domain=<server_name>, path=/B1iXcellerator
Is there a way to overcome this issue ?
Can I increase the timeout period ?
My SAP B1 version is 9.1 PL05 (MS SQL Server 2012).
Regards
~Nidal

hi,
try to following pdf and check your integration configuration.http://www.vision33.com/media/165196/v33%20how%20to%20b1if%20-%20installation%20documentation.pdf
thanks & regards,
Harshit

System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for user 'NT AUTHORITY\SYSTEM

Dear ALL
After successfully shifting the CRM from 2011 to 2013 i found a problem in Reporting section none of the report is working after some finding i conclude that MSCRM_FetchDataSource is not able to connect successfully
Through my report manager i tried to test the connection of MSCRM_FetchDataSource but i got the following error
System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for
user 'NT AUTHORITY\SYSTEM'.
I already add the NT Authority \ System as a db_owner under my database user of MSCRM_CONFIG
But still no success any one have any idea why it's happaning
Regards
RB

I found a solution I hope my post will help other
I gave the db_owner to 'NT AUTHORITY\SYSTEM' and 'NT AUTHORITY\NETWORK' and assigned with both CRM and Config database
It resolved my issue
RB

New notebook~ "Fails to login"

We received our new Acer Notebook on Friday. We had no problems setting it up and getting online. It worked up until yesterday afternoon. When we try you login we get the following message: "The User Profile service failed to login. User profile cannot be loaded." Not sure what we are suppose to do and the user manual is very brief. Any help would be greatly appreciated. Thanks.

I've seen this before on other computers. Reboot your computer, and Press F8 as soon as the BIOS screen goes away. Select Safe Mode and let it load. On the user select screen log into the Administrator profile. It should log into windows unless the administrator profile is corrupt. But after you log into the profile, click yes on the box that pops up talking about system recovery. It will take you into the desktop from there. Go ahead and close the Help and support window that pops up.
From the desktop go into the start menu and select the control panel then into user acounts. select the account name you are having a problem with and delete it. After that, click on create new account. Once complete reboot the machine and try to log in normally.
Let us know if this helps.

Slim fails to login...how to get command line back?

Man, what a drag. I (seemingly) successfully installed Arch with xfce, which is a huge accomplishment for a guy coming from years of Ubuntu, and avoiding command line and config files every chance he gets.
Anyway, I'm using slim as a display manager, and it fails to login (I am choosing the xfce session). I can't seem to get to a command line so that I can try a different display manager. Google says that Ctrl-Alt-F1 should do the trick, but that just gives me a black screen and sits there. Any help?
Thanks.

Pacopag wrote:I'm not sure how to even edit the grub file.
Like this http://www.cyberciti.biz/faq/grub-boot- … user-mode/
Does Alt-Ctrl-F2 work?
Last edited by karol (2011-05-29 03:39:49)

I can't login to solaris server using ssh(putty).

Hi,
I can't login to solaris server using ssh(putty).
However I am able to login to that server using telnet.
# pkginfo | grep -i ssh
system SUNWsshcu SSH Common, (Usr)
system SUNWsshdr SSH Server, (Root)
system SUNWsshdu SSH Server, (Usr)
system SUNWsshr SSH Client and utilities, (Root)
system SUNWsshu SSH Client and utilities, (Usr)
I see that ssh is running. Please suggest.
# ps -ef | grep ssh
root 392 1 0 Feb 27 ? 0:00 /usr/lib/ssh/sshd
root 12523 392 0 Mar 03 ? 0:00 /usr/lib/ssh/sshd
sbasha 12526 12523 0 Mar 03 ? 0:07 /usr/lib/ssh/sshd
sbasha 10957 10954 0 Mar 03 ? 0:05 /usr/lib/ssh/sshd
root 16495 16491 0 10:46:54 pts/2 0:00 grep ssh
root 10954 392 0 Mar 03 ? 0:00 /usr/lib/ssh/sshd
Thanks & Regards,
-Gnanashekar-

Hi,
I found solution to the problem. By default sshd in solars 10 does not permit root logins.
We need to edit /etc/ssh/sshd_config file as follows:
PermitRootLogin yes
and restart the sshd.
#svcadm restart ssh
Thanks & Regards,
-GnanaShekar-

Failing to login

I left my MacBook Pro on at night like every night. This morning I failed to login as it just stays on the blue screen forever. I forced reboot with the power button and it kept getting me back to the login screen a minute after every time I enter my password.
I forced restart with the power button and it no more gets me to the login screen.
I started my MBP in safe mode and the result is it became horribly slow after logging in and after more than half an hour the lower dock didnt show up yet. Opening a document on my desktop or going to the upper bar shows the beach ball forever then it just disappears!!! Seems to me like the memory is not there.
Surprisingly in BootCamp Windows 7 works without problems!!!

UPDATE =>
Finally I managed to have the Disk Utility to work in normal mode and after fixing a long list of errors here are the remaining unresolved errors (please note the system is very unstable, inconsistant and VERY SLOW):
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

Failed user login attempts

hi can u say in which failed user login attempts will be stored.

Hi,
Configure the SAP audit system with TC SM19.
Then use TC SM20 to see failed logins (and much more)
cheers
Jan

Failed to login

Hi Foks
i have strange issue,i m connected to my acs using browser for mangment purpose , i m entering the correct username and password but i receive failed to login,why is that?how to fix this issue

Hi,
For testing purpose, you can try login with the Admin username and password you created on the ACS.
Hope this helps..
Regards,
Anisha
P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.

Failed to login to Solaris

Similar Messages

Maybe you are looking for