Failed to navigate from RegistryWizardState

Hi,
I am running into an issue while configuring EPM system 11.1.2.3. When I enter the Shared Services user credential, it gives me an error "Failed to navigate from RegistryWizardState:. I have granted the shared services user with the following grants. Which grants am I missing? HYP_SS being my shared services user/schema?
Also, as mentioned in one of the threads to delete the reg.properties file. I can't seem to find that file in 11.1.2.3 directory structure.
Grant create table to HYP_SS;
GRANT CONNECT TO HYP_SS ;
GRANT RESOURCE TO HYP_SS ;
ALTER USER HYP_SS DEFAULT ROLE CONNECT, RESOURCE;
thanks a bunch.

Have you given all privileges as per below listing in Oracle Install-Config guide?
It says,
The following privileges must be granted to the owners of the database schemas:
CREATE ANY SYNONYM 
CREATE CLUSTER
CREATE INDEXTYPE
CREATE PROCEDURE
CREATE SEQUENCE
CREATE SESSION
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
DROP ANY SYNONYM
UNLIMITED TABLESPACE
Did you have a look at configtool.log as to what errors its having ?
I think the reg.properties will get created if you have all sufficient rights on Oracle database user/schema.
Regards,
Santy

Similar Messages

  • EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry.

    Hi,
    I am getting Below error in RHEL 6.5
    EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details"  while configuring Essbase Server on 64 bit OS using Oracle Database
    Any help...?

    Hi ,
    This community is to discuss Oracle Application Server specific issues, you can post this query in the below Hyperion Forms for better response:
    Hyperion EPM
    [OR]
    Oracle Hyperion EPM (MOSC)
    [OR]
    Hyperion Certification for EPM (MOSC)
    Regards,
    Prakash.

  • EPM configuration ESSBASE Failed to navigate from RegistryWizardState:Error while initializing registry.

    When I was in the configuration ESSBASE, ran into trouble.
    Failed to navigate from RegistryWizardState:Error while initializing registry.
    soft: EPM 11.1.2.3  
    OS: linux redhat6.1
    Two planing server configuration
    A server configuration essbase and install oracle relational database
    Planning configuration is successful, but the first step in essbase Shared servers failed, the error is:Failed to navigate from RegistryWizardState:Error while initializing registry.
    What should I do?
    Please

    If you are using Oracle database, Create a user(schema) with the below previliges
    Roles:
    DBA, Resource, Connect
    privileges:
    CREATE ANY SYNONYM,CREATE CLUSTER,CREATE INDEXTYPE,CREATE PROCEDURE,CREATE SEQUENCE,CREATE SESSION,CREATE TABLE,CREATE TRIGGER,CREATE TYPE,CREATE VIEW,DROP ANY SYNONYM
    Thanks,
    mady

  • Failed to navigate from registry

    On a distributed install for 11.1.2.2 on win 2008 R2 64 bit, I was able to get Shared Services configured to a new schema. But when trying to configure R&A and Planning on another box I landed on "failed to navigate from registry wizard state error while initializing registry" while trying to perform a connect to shared services DB. I tried and tested the following:
    added entries to the host file, verified db connectivity, telnet to the db host everything is fine. Its an oracle database on a unix box. I have been able to use the same db for performing config on DEV and was successful at that .
    Any thoughts on this ?

    [2013-02-20T08:38:41.892-08:00] [EPMINS] [TRACE] [EPMINS-00015] [oracle.EPMINS] [tid: 11] [ecid: 0000JnsRD7C5UcYTTq9xWc1H9FOB000004,0] [SRC_CLASS: com.hyperion.hit.wizard.AbstractWizardAction] Invoked action: navigation.next
    [2013-02-20T08:38:41.907-08:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: No database properties could be read
    [2013-02-20T08:38:42.063-08:00] [EPMCFG] [TRACE] [EPMCFG-01758] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.config.wizard.impl.DBConnectionForm] DB type is Oracle
    [2013-02-20T08:38:42.063-08:00] [EPMCFG] [TRACE] [EPMCFG-01114] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] JDBC driver class is oracle.jdbc.OracleDriver
    [2013-02-20T08:38:42.063-08:00] [EPMCFG] [TRACE] [EPMCFG-01115] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Connection URL: jdbc:oracle:thin:@ <<<<<ORACLE_DB_HOST>>>>>>:1521:HYPDEV
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [TRACE] [EPMCFG-01116] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] DB Version check
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Error:
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Error:
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [TRACE] [EPMCFG-01020] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Error:
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [TRACE] [EPMCFG-01117] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] majors(11 vs -1), minors(2 vs -1)
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.utils.CISUtilityHelper] trace: Database characterset: AL32UTF8
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [TRACE] [EPMCFG-01861] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] Re-using an existing registry, DBtype is ORACLE
    [2013-02-20T08:38:42.110-08:00] [EPMCFG] [TRACE] [EPMCFG-01858] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] JDBC URL: jdbc:oracle:thin:@ <<<<<ORACLE_DB_HOST>>>>>>:1521:HYPDEV
    [2013-02-20T08:38:42.157-08:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: Found registry DB component
    [2013-02-20T08:38:42.172-08:00] [EPMCFG] [TRACE] [EPMCFG-01320] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] System component already exist in the registry: component type = SYSTEM9
    [2013-02-20T08:38:42.188-08:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = FOUNDATION_SERVICES_PRODUCT
    [2013-02-20T08:38:42.188-08:00] [EPMCFG] [TRACE] [EPMCFG-01324] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Registry database connection component already exists in the registry: component type = DATABASE_CONN
    [2013-02-20T08:38:42.188-08:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
    [2013-02-20T08:38:42.204-08:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = SHARED_SERVICES_PRODUCT
    [2013-02-20T08:38:42.204-08:00] [EPMCFG] [TRACE] [EPMCFG-02135] [oracle.EPMCFG] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Setting hss mode to NOFUSIONAPPS
    [2013-02-20T08:38:44.762-08:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000JnsUANn5UcYTTq9xWc1H9FOB000006,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Error:[[
    com.hyperion.hit.wizard.FailedButRetryPossibleException: Error while initializing registry.
         at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:359)
         at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:544)
         at java.lang.Thread.run(Thread.java:662)
    Caused by: java.lang.NullPointerException
         at com.hyperion.cis.config.persistent.utils.RegistryUtils.populateSharedServicesConfigurationFromRegistry(RegistryUtils.java:192)
         at com.hyperion.cis.ConfigToolDocument.<init>(ConfigToolDocument.java:198)
         at com.hyperion.cis.config.document.PS1CTConfigurationLoader.updateConfigurationByRegistryData(PS1CTConfigurationLoader.java:119)
         at com.hyperion.config.document.DocumentUtills.updateConfigurationsByRegistryData(DocumentUtills.java:58)
         at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:267)

  • Oracle Server 11.2.0.1.0 64-bit fails when invoked from InstallShield

    I'm trying to install the Oracle Server 11.2.0.1.0 64-bit on Windows 2008 SP1 from the InstallShield 2010.
    The installation is silent. Invoked by command line:
    J:\Oracle_11.2.0_x64\OracleServer_11.2.0.1_x64\setup.exe ORACLE_HOME_NAME="ARAXI_11" -silent -nowelcome -force -nowait -noconsole -loglevel fine -noconfig -ignoreSysPrereqs use_prereq_checker=false -responseFile C:\Oracle\11.2.0\installation\scripts\SVRCUSTOM11.2.0.rsp
    The problem is that when the command is invoked from command line (cmd), the installation is successful.
    However, when the same command is invoked from under the InstallShield, the installation fails on Architecture requirement check:
    INFO: *********************************************
    INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:OPERATION_FAILED
    INFO: All forked task are completed at state performChecks
    INFO: Completed background operations
    INFO: Moved to state <performChecks>
    INFO: Waiting for completion of background operations
    INFO: Completed background operations
    INFO: Validating state <performChecks>
    INFO: Using default Validator configured in the Action class oracle.install.ivw.db.action.PrereqAction
    INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
    SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
    CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Oracle\Inventory\logs\installActions2011-05-19_12-58-13PM.log
    ACTION: Identify the list of failed prerequisite checks from the log: C:\Oracle\Inventory\logs\installActions2011-05-19_12-58-13PM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
    INFO: Advice is ABORT
    INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
    The questions:
    1. Why the requirement checks give different results when installation is invoked from CMD and from InstallShield?
    2. Why the requirement checks are done despite the parameters "-ignoreSysPrereqs" and "use_prereq_checker=false"?
    3. What should I do to get the installation pass (either remove the check or make it satisfying)?
    PS. The 32 bit Oracle Server installation on Windows 2003 works without problem when invoked from InstallShield.

    Please use 2008R2 if you want to install 11gR2 versionThank you for that update. Possibly it will help me to solve another trouble.
    Regarding the problem I described, the issue is that I install Oracle Client 32 bit prior to trying to install Oracle Servier 64 bit.
    The Oracle Client setup had started RemoteExecService.exe 32 bit process. And the process remained running after the installation completed.
    The Oracle Server setup utilizes the running RemoteExecService.exe process. Since the process is 32 bit, the architecture requirement check had failed.
    I've added to my script killing the process
    taskkill /F /IM RemoteExecService.exe
    before invoking the Oracle Server installation.
    That way the Oracle Server setup starts another RemoteExecService.exe process and the new process is 64 bit.
    The architecture requirement succeed.

  • How do I stop Firefox from playing video after I navigate from the page or leave Firefox?

    Simple and annoying. . Extremely frustrating issue with Firefox for Android. ..
    I watch a YouTube video or any flash video. . And after I hit play, the ONLY way to stop it is to hit pause or let it play to the end or close the tab. .
    It will NOT automatically stop if I open another tab. or if I navigate from Firefox. .
    I feel this is a very basic feature. Did I set something up that was wrong?
    Can I ask two questions?
    I have another extremely annoying and frustrating problem with Firefox for Android.
    The "top" (if you pull down the tabs) search bar DOES NOT allow my stock Samsung keyboard to auto space. . Thus instead of typing
    "How do I stop Firefox from playing video after I navigate from the page or leave Firefox?"
    I'll type in
    "HowdoIstopFirefoxfromplayingvideoafterInavigatefromthepageorleaveFirefox?"
    Unless I manually got the space bar.
    Using a recently factory data reset Samsung Galaxy s4 active.. android 4.2.2 and stock Samsung keyboard ... Firefox 34.0.1
    Thanks in advanced.
    Ps
    I was a hardcore xscope user for years and just recently gave in to Firefox when i lost all my bookmarks due to a forced factory data reset. .

    I'm using a different keyboard which works fine in the most top search bar...
    I cannot believe that it's not a feature.
    What if I was watching a video and wanted to shut it off quickly? I'll have to hit back? Wait for the previous screen to load then hit the power button?
    Please tell me that feature ids soon to come

  • How to navigate from view of slave DC to view of matser DC?

    Hello!
    I've got DC1 (master) and DC2 (slave) in different projects. Both projects are WD Java local DC projects. DC2 has one component (say A) with view, window, view interface, controller and controller interface and has no applications. This view should be called at start of application. Only DC1 has application. Public parts created properly so DC2 visible for DC1.
    In main window of DC1 I embedded View Interface from DC2 and make it default. View Interface has outbound plug connected with inbound plug for View of DC1.
    What I should to do to allow user navigate from View Interface of DC2 to view of DC1 by press button placed at view of DC2?
    I'm working with NW7.0.
    Regards, Lev.

    Hi
    What I should to do to allow user navigate from View Interface of DC2 to view of DC1 by press button placed at view of DC2?
    Hi
    One solution will be already provided by  jithin james .
    Apart from that if u want to make something generic (For your case View interface of different Dc) follow this  [Best practices |https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0409d83-5ed5-2910-ef91-e41da6d5b8b4]
    Best Regards
    Satish Kumar

  • How to navigate from a view to an IView in portal

    Hi all,
             Onclick of an application in my portal my appliaction gets opened.But the problem here is onclick of cancel in my applcation i want to navigate to my IView in portal.
    For navigation between view2 to view1  i used wdThis.wdFirePlugtoView1();
    by creating a navigation link.
    How to navigate from view1 to Portal IView
    Regards
    Padma N

    Hi padma,
                 Go to Iview Property in portal Content managment and take the PCD location.
    It may look something like this
    ROLES:portal_content/ZABC/ZPROJECTS/com.abc.ZPortfolio/com.abc.ZPortfolio/com.abc.ZRoles/com.abc.ZPortfolioReconle/com.chep.ZReconciliation/com.chep.ZReconEnquiry_IView
    Create a string variable with the PCD location
    String pcdLocation = <pcd location>
    And call using the iview using the following code
    WDPortalNavigation.navigateAbsolute(pcdLocation, WDPortalNavigationMode.SHOW_INPLACE, WDPortalNavigationHistoryMode.NO_DUPLICATIONS,"&reference="+reference);
    Here &reference is the application parameter, if the application with which the iView is created has parameter and is not mandatory.
    Hope this helps.

  • Macbook occasionally fails to wake from sleep

    i have a new macbook (purchsed in july) which occasionally (every 1-2 weeks) fails to wake from sleep. it either hangs on the blue screen which first comes up when you switch it on, or on the black screen which normally follows shortly afterwards.
    i regularly use it "closed", i.e., with an external screen and keyboard, but the problem seems also to happen occasionally when i switch it on without these peripherals.
    any ideas?
    i've also had dvd player crash once. it was in full screen mode, and i couldn't switch to any other applications or force quit dvd player, so again i had to cut power.
    Macbook   Mac OS X (10.4.8)  

    Having similar issues...not that it happens everyday ...it's very infrequent..but yeah im in the same boat..
    As far as the computer being hot...
    Go to :
    System Preference--->Energy Savings
    From there you should have the boxed check both on Battery power and AC Cord to put the Hard drive to sleep when possible..
    Once i did this it never happened again(the closing of the lid and still running)
    as far as the other issue??Help.!!Anyone?

  • How do I navigate from a hyperlink on one page to an anchor within the tab widget?

    Hi guys can you please assist me with that issue I am describing in the question: How do I navigate from a hyperlink on one page to an anchor within the tab widget? I assume that it is not working because the tab widget is truly just on one page and anchors work within a page but not a specific tab. Is there a way around that?
    Thanks.

    an interesting question. Anchors work across pages (global) without any problem. Do they work within tabs or any other widgets I haven't tried, but it looks like you have and without success. I can see the temptation for doing this, but if you think about it why would you? Set the anchor on the page next to the tab(s) and hey presto the user needs only click the tab to which the hperlink refers, nothing could be more convenient! Of course, if the user cannot relate the tab to the hyperlink there's a problem. Generally solved by titling (like if the hyperlink is cats, the tab should preferably read cats and not dogs)! It's the only work around i can think of. Hope it helps.

  • I just enrolled in CC and I can get the app on my desk but when I navigate from home to apps to download apps, it just goes around and around in a blue circle (I'm on a mac).  help

    I just enrolled in Creative Cloud and I can get the app installed on my desk but when I navigate from Home to  Apps to download apps, it just goes around and around in blue circle (freezing).  Im on a MAC. 
    Thank you!

    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Navigate from a chart to another tab page

    I have a requirement to navigate from a chart to another tab page. Right now my implementation requires that I select one of the bars on the chart to navigate which also performs filtering. I want to be able to click any area on the request (not just the bars) that contains the chart to take me to another tab page and I don't want any filtering. Can this be done?
    Thanks in advance!
    Edited by: user9213142 on Oct 24, 2010 5:50 AM

    Hi Srikanth,
    Thanks for getting back to me.
    The method that recommended is what I am currently using. However, I want to be able to click anywhere on the chart not just the bars. Is there away to navigate by clicking on anywhere within a section?
    Thanks again!

  • XSL Mapper JDeveloper plugin fails to launch from App Engine

    XSL Mapper JDeveloper plugin fails to launch from App Engine ONLY WHEN THE TARGET LOCATION OF THE SERVICE CONFIGURATION POINTS TO AN HTTPS URL.
    If I make the target location field of the service configuration point to an HTTP url, the plugin launches fine.
    The error message indicates that there is a missing certificate in the chain:
    oracle.tip.tools.ide.common.xsdgrammar.SchemaGrammarException: sun.security.validator.ValidatorException: No trusted certificate found
    A basic google search on this error leads me to believe that I need to add a key to the java clients keystore on my PC. Can anyone confirm or deny this? Has anyone else encountered this?

    After digging pretty hard I believe I've found the cause and two possible solutions...and I quote...
    "This seems to be a known conflict between versions of the Digi 001, the Audio Media III card, Panther OS, Pro Tools, and QuickTime 7 and above. This Mac is running...
    OS Panther 10.3.9
    Pro Tools LE 6.2.2
    This is what I've found from http://sillydog.org/forum/sdt_8928.php (page three of this thread).
    "testing has yielded that the Audio Media III card can be used with Pro Tools LE 6.2.3 on a platform as high as OSX Panther 10.3.9 as long as you do not (I repeat do not) install QuickTime 7ever. The QuickTime 6.5.2 re-installer will not remove problems created by installing QuickTime 7."
    "Basically if you are running what Digidesign refers to as “Legacy” hardware. Audio Media III/ Toolbox or the Digi 001. You are running a version of Pro Tools LE that is incompatible with QuickTime 7. If at any point QuickTime 7 is installed you must re-install (the OS and all programs) to delete its effects, and are stalled on OSX 10.3.9 (w/o QuickTime 7)."
    Knowing this, I was able to find a possible solution here... http://fox-gieg.com/tutorials/2005/undo-quicktime-7/
    The other solution is to upgrade equipment, or re-install OS and other Apps to go backwards.
    Hope this helps some people!

  • SA 520 error every 10 seconds: sqlite3QueryResGet failed.Query:SELECT * FROM networkInterface WHERE interfaceName=\'bdg1\

    Hi all,
    On a SA 520 I got this error, every 10 seconds:
    sqlite3QueryResGet failed.Query:SELECT * FROM networkInterface WHERE interfaceName=\'bdg1\
    Internet access was very spoty and I couldn't reach the firewall administration on the LAN interface. Had to shutdown the appliance to get it working again.
    Firmware version is 2.1.7.1
    What could have happenend?
    With kind regards,
    Jeroen

    Hi, everything in the "Quick Reference" section should be commented out with ;
    You should change those settings further down in the php.ini file.
    Example:
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    display_errors = Off
    Last edited by adrianx (2013-07-26 12:32:02)

  • MacPro6,1 - Failing to wake from 'sleep'

    I have a MacPro6,1 which keeps failing to wake from 'sleep' is there a solution to stop this or is it a fault? considering I've only had it a few months i'm not impressed!

    Open  the Console app and see if you can find log errors at the time you try to wake the Mac.
    Also see:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • How to connect MBA to Windows domain over Wi-Fi?

    Hi. I`m on a university campus. MBA automatically picks up wi-fi connection, which is great. Because MBA does not have an Ethernet port, how do I join my office's Windows 2003 network domain over Wi-Fi? Thanks for any help I can get!

  • Where can I find detailed Release Notes?

    We are performing transition from 5.5 to 7.0. We do not need full description, it is too large. Just differences from the previous version.

  • Windows will not restart properly when iPod is Connected!

    Please help...I am running Windows XP and i have a 5th Gen iPod. My computer will not restart when I have my iPod connected to my computer, it starts then after a few seconds it just goes to a blank screen. Yet if I unplug my iPod my compter will res

  • New drives that would work in my ENVY Phoenix 810

    Hello,I am looking to add a new harddrive and a ssd drive to my ENVY Phoenix 810qe Desktop,Anybody have any experience with this can tell me what I need to do? I would like to know what brand drives I should get, also any brackets and screws I would

  • ProcessBuilder Syntax errors

    Hi, I'm getting syntax errors with the following two statements x ProcessBuilder pb = new ProcessBuilder("xxx.exe"); x pb.command(filename); It says there is no such constructor for the first statement. For the second one, no such a method for the da