Failed to open CoreMidi message
hi
out of the blue, when i launch any of my music applications, i get this error message.
all my equipment is connected properly.
when i go in Audio-Midi Set Up (Applications/Utilities), and i click on the MIDI tab, the application suddenly quits.
This happens everytime i try to access the midi control panel.
Needless to say, none of my midi devices are not recognized by any of the programs.
i've restarted my computer many times, i also ran CockTail and restarted, but nothing seems to sove the issue
can someone tell me what's happening?
thanks
milly
Power Mac G4 Dual 867mhz, TiBook 12'' G4 867Mhz Mac OS X (10.3.9)
You're Welcome milly!
Unfortunately, I don't use Audio MIDI Setup, so I really can't help much, but are all of your devices drivers updated?
Have you tried accessing the MIDI tab, with all of the devices disconnected?
In Get Info (Command + I keys) on Audio MIDI Setup, what is displayed for Ownership & Permissions?
I don't know if it will help, but have you run Repair Disk & Repair Permissions? It can't hurt!
Here are links to KB Articles that might give you some hints.
Audio MIDI Setup: MIDI Configurations Are Lost
My audio device doesn't work or doesn't appear in Audio MIDI Setup
Hopefully, someone who knows more about the utility, will pop in here!
ali b
Similar Messages
-
ITunes failing to open - error message reads "New iTunes Library"
My computer turned itself off last night after overheating.. this has happened before. I went to turn it on this morning and it went through a start up process to ensure now problems occurred. It is now back up and running yet my iTunes will not open and it comes up with an Error message and a Red Cross to say "new iTunes library" when I haven't done anything. I can't open my music or even sync my phone! I have an Acer 5733 laptop and its running in windows 7. it's only a year old... help!!!
are you running any anti virus software on your machine ?
-
"Failed to open page" keeps happening and happening!
[ Edited by Apple Discussions Moderator; Please start a new topic about your technical issue. ]
I updated to Safari 2.0.3 with OS 10.4.5
Now, repeatedly, when I go to all sorts of web pages, I get the dreaded "fail to open page" message.
Almost universally, if I then hit the refresh button, the page appears instantly!
Don't know if this is the general pattern or not, but it seems particularly to occur with the first visit to an old site, meaning a bookmarked page that I hadn't yet visited with 2.0.3. Subsequent visits seem to then load quickly.
Any ideas what's gone wrong here or how to fix it?
I updated Safari Enhancer to the latest 3.3, tried the sequence of unplugging cable modem and Airport Express and restarting Airport and Safari, and just now emptied the cache.I appreciate the suggestions here, but I'm leery of doing them!
I'd have to dig up my old install disks... (where did I put them? and they are an earlier version of Tiger and then my Safari version would be out of date... and then I'd have the interesting dilemma of trying to update just Safari--and the concern, however unfounded, of things being out of whack.
I've had also hassles in the past of doing a complete reinstall, too. Where certain settings seem to be lost in the ether and then the replacements are hard to track down! I'd anticipate losing a day to trying to fix that! And I'd have to follow that up with re-installing all the recent updates (OS and security ones)-- and that's a labyrinth I'd just as soon avoid!
I'm hoping that the latest security update will have included some tweaks to Safari that will fix this (wishful thinking on my part no doubt)...
in the meantime, until it starts bugging me even more, I'd rather live with the occasional page not loading (and having to refresh) than embark on the piecemeal update of Safari or the complete re-install and then having to update that.
But if some other intrepid soul would like to try it--and report back here--and if it works--then maybe I'll be adventurous--but only on my day off--and with lots of snacks to gnosh on and podcasts to play in the background on my Palm while my Mac is out of commission! -
When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?
Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden -
I can't scan to my computer with my HP Photosmart Plus B2010a, I get a "Failed to open a session on the device" message everytime. I'm using the most current driver for OS X Lion 10.7 off the HP website.
I get the same "Failed to open a session on the device" message with Apple Image Capture as I do with the HP Utility software.
-
For 'Reason' if you get the message "Failed to Open MIDI Support Library"
I tried to open Reason 3.0.5 with an MBox 2 on my new MacBook Pro (Leopard) and I got this message: 'Failed to Open MIDI Support Library.' When I went to my 'Audio-MIDI' setup on my Mac, nothing loaded properly...
I found the solution to this problem after looking around online, and figured other people might be having the same problem, so here it is...
First, create a new folder on your computer desktop and call it "Old MIDI Drivers" (or something similar), then go to Macintosh HD>library>audio>midi drivers, and move all the drivers (that you don't plan on using) from that folder into your "Old MIDI Driver" folder on your desktop. For example, I moved all the drivers out except for my MBox 2 driver.
After you do this, you may have to restart your comp. (I didn't) and Reason should run.
Hope this helps...(No biggie, but if you mark your own post as 'Answered' then people searching for answered posts will be able to find it more easily…)
-
I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?
Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh -
"Extraction Failed: Cannot Open Output File" error message when installing new drivers
Hello, I'm trying to install new drivers for my HP Photosmart C4385 Printer. I downloaded the full feature drivers for Windows XP 32-bit, and when I start to install (extract), I get the error message:
Extraction Failed
Cannot Open Output File
And the process closes. It happens at about 85% extraction every time.
Any idea why? I called HP but since it is out of warranty they wanted money, which I think as absolutely ridiculous - won't even give me basic support?? Poor, poor customer service.
This question was solved.
View Solution.Hi,
If you haven't still got the Full Feature software installer, download it from the link below and save it to your Desktop. If you already have it, place it on your Desktop.
ftp://ftp.hp.com/pub/softlib/software10/COL20274/mp-53147-4/100_228_PS_AIO_02_Full_USW_enu_NB.exe
Make sure the Printer is disconnected from your PC.
Download and install 7-ZIP. Once installed, right click on the software installer for your printer, select 7-Zip and choose extract files, then click Ok.
Open the newly extracted folder and double click the setup application to start the installation ( the setup application will probably have the same icon as the original software installer you downloaded ). Connect the printer to your PC when the software asks.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Failed to open rowset error message
Post Author: eneace13
CA Forum: Data Connectivity and SQL
Hi All,
I have a report that currently uses only views: V1, V2 and V2_1 (an alias view for V2). If I try to add a fourth table V4 so I can pull just one additional field into the report, I get the following message when I try to run it:
Failed to open rowset
Details:42000[Microsoft][ODBC SQL Server Driver][SQL Server] Could not allocate ancillary table for view or function resolution. Maximum number of tables in a query (260) was exceeded.
I get the same error message if I try to create a SQL Expression to pull in the same field from view V4.
How can I get this error mesage if I'm only using 3 views? I'm on Crystal 9, SQL 2k.
Thanks in advanceHi,
Please provide following information;
1.What is the exact version/patch level of Enterprise and the crystal reports application at the web team's end.
2.What is the database(with version) and the connectivity method (native/odbc/oledb) at your end.
3.The same details as in point 2 above, at web team's end. -
[Solved] Openbox-Message: Failed to open the display from the ....
ArchLinuxForums_Suck wrote:
Hey, I'm new to Arch and I've been working on setting it up on my Laptop and so far I haven't had very many problems save one. I can't get any of the available Window Managers. Whenever I try running them I get a message like:
"wmii: fatal: Can't open display," or "Error: Couldn't connect to XServer" (Fluxbox), or "twm: unable to open display" or "dwm: cannot open display" or "Openbox-Message: Failed to open display from the DISPLAY environment variable,". What am I supposed to do? I've checked to see if it was a problem with my installation of Openbox by reinstalling that and installing several other window managers, and I've checked to see if it was a problem with me not having the right kernel modules loaded, but after I ran "hwdetect --load-modules," which is supposed to load all detectable modules, but even after that I still get the same messages. Any ideas, I've tried just about everything that I know\have thought about, so yeah... any ideas?
ngoonee wrote:You'd need to provide us with details on your system. For example, what GPU are you using? hwdetect can be hit-and-miss sometimes.
karol wrote:How exactly are you trying to run them? Are you trying to run them as root? Are you using .xinitrc? If so, post it.
Boxes wrote:Uh... I try running them by typing: "openbox" or "twm" or "wmii" or "xinit openbox-session", and when I run "xinit" by itself, I get this: ". . . (EE) Failed to load module 'glx' (module does not exist, 0), (EE) Failed to load module 'intel' (module dose not exist, 0), (EE) Failed to load module 'vesa' (module does not exist, 0), (EE) Failed to load module 'fbdev' (module does not exist, 0), (EE) No drives available." Oh, and nGone I'm running an Intel Mobile 4 Chipset. I don't have a GPU. I just have an Intel Graphics Controller.
Boxes wrote:Okay, well I got "xinit openbox" to work by searching for the "intel," "vesa," "fbdev," and "glx" packages via pacman and installing them. I still can't run openbox without xinit, and I tried running "xinit wmii," but it didn't seem to work, although it did run, but I couldn't do anything. It looked exactly the same was as "xinit openbox" did right after I installed "vesa," which was the first package I downloaded and installed via pacman.
tomk wrote:
You need to read a bit more about how X works - you can't run any window manager unless there's a X session for it to run on. That's why xinit works. Set up your ~/.xinitrc correctly and use startx.
xinit wmii ran a wmii session, but I guess you didn't configure it at all - that's why you couldn't do anything. Again, more reading required.Oh, I see. So an X-session is something that's required. Oh, okay.
-
Flash5.5 "failed to open document" error message
Yesterday I worked on two files both worked fine. I saved my work and a backup. This morning I got the dreadful message "failed to open document" followed by the path to the file. The output panel gave me this message:
The following JavaScript error(s) occurred:
In file "/Users/lucilarios/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Javascript/ObjectFindAndSelect.jsfl":
Cannot find file /Users/lucilarios/Desktop/Trabajo_Macondo3/ProjectAlgebra09/TutorialsAlgebra/Integers/Law sOfAddition/NewProject/AssocLawAdd.fla.
The info on the file size shows 0 bites
Both the file and its backup were corrupted.
Are there compatibility issues betweenAdobe CS5.5 Programs and Mac OX Lion? Lion has crashed my computer several times and other programs like Photoshop and Adobe Bridge have also misbehaved. Has anybody experienced any issues with Lion and Flash?Hi ,
I'm sorry for the inconvience . We are actively working on with customers in resolving this issue .
Please help us answer the following question below so we can reproduce this issue and provide some solution .
About the location where .fla file is being saved
To a local drive? (eg. hard drive, SSD drive, USB key, SD card, opened as email attachment, opened from a zip archive, etc)
…or over a network? (eg. shared Windows folder across Active Directory network, SMB share between OSX machines, symbolic link/junction points to path) If so, do they have full file permissions to write to that folder?
The .fla file before corruption/crash
Reproducible from a new document?
File history. eg. originally created in CS4, saved in CS5 and re-saved in CS5.5
3. Where was the backup copy saved ?
4. Did flash crash y'day while you were saving your Fla file ?
Can you please email me your corrupt fla as well as any previous version of a working backup copy if any to [email protected] .
Thanks
Sukhbir
Flash Authoring -
My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?
Okay. I will try this again. I did remove and reinstall earlier, but will
do it now.
regards, Mike
On Wed, Oct 15, 2014 at 12:55 PM, Sabian Zildjian <[email protected]> -
how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?
Hello Kwastfamily,
It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?
I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?
-
Tried to install Firefox but an error message "Extraction failed - cannot open output file" always pops up, without a reason. Why's this happening?
Try to disable your anti-virus software temporarily to see if that makes it work.
You may need to delete the temp folder (%TEMP%) to remove the old files.
Maybe you are looking for
-
I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previous
-
Lion keeps resizing my windows ?..
HI GUYS ! something has been happening to me lately that ends up being a real pain in the *** - i don't know if it's Lion, my iMac, a bad planetary alignment or what... lets say i have a few folders on my desktop & during the course of the day i open
-
How do I save and display all messages in non primary email address
I have 2 email accounts on Thunderbird. The emails to the secondary account are not saved. I can open and read new messages but if I want to view them later, they are gone. My primary email retains all messages. Can I configure Thunderbird so I can r
-
TS2529 I would like to view the info that I have backed up eg my contacts before I reset my iPhone.
I would like to know how I can view the info that I have backed up eg. my contacts, before I reset my iPhone.
-
We are looking to implement a barcode solution for R11. It should be integrated with purchasing, Inventory, and warehouse management. Any recomendations/experiences would be greatly appreciated. Regards Shafiq Rehman