Failed to Open/parse setup script.
While installing SAP GUI 6.40 I got error message " Fail to open/parse setup script. Please check if the script setup/sapsetup.xsc exist" I found that said xsc file is in the directory. Any help in this regard?
Thanks and Regards,
Anil
Hey Guys,
I solved the problem. If u encounter this problem, remove the C drive sharing ( drive where the setup file is located) and run the installation in a normal way. To my mind system get confused between C:/ and C$/...
Thanks and Regards
Anil
Similar Messages
-
Oracle Open Script - Failed to open script error
I am receiving the following error when trying to open a script in Oracle open script
'Failed to open script' has encountered a problem.Failed to open <script_name>. See error log for details.
I have tried the Giri Mandalika's solution but there is no "<failing_script_name>" folder in specified path.
Can someone please help me to resolve this issue ?Hi ,You can try deleting the osworkspace folder .The folder should be at C:\Users\<username>\. May be take a back up copy of the folder before deleting it.Let me know if it works.
-
Virtual Lab: Exploring SQL Server 2012 Integration Services - Setup script fails
I am trying to work through a Lab, but cannot get past the Setup script stage.
The lab is "Exploring SQL Server 2012 Integration Services". I have tried this several times (with new lab instances) and the result is always the same.
I double click the Setup command ... Press 2 ... when the popup dialog appears I press Ok ... the progress bar completes and the messages in the text box seem to indicate everything has completed (last line says "Done"). I click Close as per the
instructions and then the script moves to the "Configure SQL Server" stage.
After a short delay a number of error messages appear: "Could not open a connection ... Login / timeout expired" etc - basically it can't find or can't connect to the server.
I expected these labs to work seamlessly :)
Anyone know what's going wrong here?
Thanks,
LarryI am moving it to SSIS.
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
The wizard fails with: windows setup failed to open distribution share d:\ds (..etc)
I am running it from a USB disk that has over 4GB free space, all the other files and folders are shown in the DS folder ok
Please advise what i should do here?
Does the drive need to be a certain format? its FAT32 at the moment (not NTFS, so no security)
I have tried copying the contents of the wes7-ibw iso to another USB drive and the same thing happens.I solved it : setup failed to open distribution share d:\ds ... error 0x8007000 /0x8007003
the cause I assume there is something strange about the CD file format on that disk.
I first created a bootable usb (diskpart) then as i didnt had software to do it all in once
i converted the original CD to iso, and used other software to burn an ISO as bootable CD on usb.
( i used iso to usb for that its free )
i ve tried it with the usb as fat32 and (using convert converted fat32 to NTFS (stayed bootable).
I even tried different hard disks no difference same error.
Each time same error.
Then in the end i noticed the folder content of the DS folder on USB and CD wasn't equally.
So then i copied directories one by one over their existing USB counterparts
After that it worked...
Maybe the CD isnt folowing some CDrom standards, or uses a rarely used format; not wel recognized by common CDrom tools -
How to resolve "Failed to open the panel socket"?
I am trying to run some of our Flexunit tests on Unix OS. To setup my environment I followed all of the steps on http://docs.flexunit.org/index.php?title=Ant_Task document. My environment is now:
OS: RedHat 5 64bit
SDK 4.1.0
Flexunit version 4.1.0-8-as3_4.1.0.16076
Flash Player 10.3.181.34
Apache Ant 1.8.2
I am trying to compile and run the provided sample application “FlexUnit4SampleCIProject” with the included ant build script. The application gets compiled fine but flash player fails to run the tests. The only error message that I see in the console is “Failed to open the panel socket” Below is the complete log from the console. Does anyone know what I am doing wrong?
Any help is greatly appreciated!
===================================================================================
[demomictay@rdcesx09113 FlexUnit4SampleCIProject]$ ant -v clean package
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Detected Java version: 1.6 in: /usr/java/jdk1.6.0_26/jre
Detected OS: Linux
parsing buildfile /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml with URI = file:/home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Project base dir set to: /home/demomictay/proj/FlexUnit4SampleCIProject
parsing buildfile jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
[property] Loading Environment env.
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, test, package, ]
clean:
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
[delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml
[delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf
[delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
Build sequence for target(s) `package' is [init, compile, test, package]
Complete build sequence is [init, compile, test, package, clean, ]
init:
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
compile:
[mxmlc] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
[mxmlc] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf (58111 bytes)
test:
[flexunit] Validating task attributes ...
[flexunit] OS: [Linux]
[flexunit] Generating default values ...
[flexunit] Using the following settings for compilation:
[flexunit] FLEX_HOME: [/home/demomictay/sdk]
[flexunit] player: [flash]
[flexunit] sourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex"]
[flexunit] testSourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex"]
[flexunit] libraries: ["/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-as3_4.1.0.16076.sw c","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-flex_4.1.0.16076. swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-aircilistener-4.1.0-8-4 .1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4 .1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-flex coverlistener-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject/lib s/flexunit-uilistener-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIPro ject/libs/fluint-extensions-4.1.0-8-4.1.0.16076.swc"]
[null] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
[null] '-jar'
[null] '/home/demomictay/sdk/lib/mxmlc.jar'
[null] '--version'
[null]
[null] The ' characters around the executable and arguments are
[null] not part of the command.
[null] Output redirected to property: SDK_VERSION
[flexunit] Found SDK version: 4
[flexunit] Created test runner at [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml]
[flexunit] Compiling test classes: [org.flexunit.demo.EchoPanelTest, org.flexunit.demo.SampleTest]
[flexunit] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
[flexunit] '-Xmx256M'
[flexunit] '-jar'
[flexunit] '/home/demomictay/sdk/lib/mxmlc.jar'
[flexunit] '+flexlib'
[flexunit] '/home/demomictay/sdk/frameworks'
[flexunit] '-output'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf'
[flexunit] '-source-path'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-as3_ 4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-flex _4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-aircilistene r-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4 .1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-flexcoverlis tener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-uilistener-4 .1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/fluint-extensions-4.1 .0-8-4.1.0.16076.swc'
[flexunit] '-debug=false'
[flexunit] '-headless-server=true'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[null] Error redirected to property: MXMLC_ERROR
[null] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
[null] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf (104083 bytes)
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/home/demomictay/sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [true]
[flexunit] display: [7000]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/report]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Starting xvnc
[flexunit] Attempting start on :7000 ...
[flexunit] Executing 'vncserver' with arguments:
[flexunit] ':7000'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit]
[flexunit] New 'rdcesx09113:7000 (demomictay)' desktop is rdcesx09113:7000
[flexunit]
[flexunit] Starting applications specified in /home/demomictay/.vnc/xstartup
[flexunit] Log file is /home/demomictay/.vnc/rdcesx09113:7000.log
[flexunit]
[flexunit] Setting DISPLAY=:7000
[flexunit] Entry [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin] already available in local trust file at [/home/demomictay/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to allocate the agent. Exitting...
[flexunit] Failed to invoking the agent: No such file or directory
[flexunit] Cannot launch the agent
[flexunit] The messenger is now down
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
===================================================================================Hi bastini-
Could you please tell me, specifically, which version of RedHat 5 64-bit you're using? For instance, is it RHEL or RHEV; server or desktop? Just want to replicate your environment as closely as possible.
Cheers,
Thomas Fowler
bastani wrote:
I am trying to run some of our Flexunit tests on Unix OS. To setup my environment I followed all of the steps on http://docs.flexunit.org/index.php?title=Ant_Task document. My environment is now:
OS: RedHat 5 64bit
SDK 4.1.0
Flexunit version 4.1.0-8-as3_4.1.0.16076
Flash Player 10.3.181.34
Apache Ant 1.8.2
I am trying to compile and run the provided sample application “FlexUnit4SampleCIProject” with the included ant build script. The application gets compiled fine but flash player fails to run the tests. The only error message that I see in the console is “Failed to open the panel socket” Below is the complete log from the console. Does anyone know what I am doing wrong?
Any help is greatly appreciated!
====================================================================== =============
[demomictay@rdcesx09113 FlexUnit4SampleCIProject]$ ant -v clean package
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Detected Java version: 1.6 in: /usr/java/jdk1.6.0_26/jre
Detected OS: Linux
parsing buildfile /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml with URI = file:/home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Project base dir set to: /home/demomictay/proj/FlexUnit4SampleCIProject
parsing buildfile jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/to ols/ant/antlib.xml with URI = jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/to ols/ant/antlib.xml from a zip file
[property] Loading Environment env.
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, test, package, ]
clean:
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
[delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner. mxml
[delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner. swf
[delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
[delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
Build sequence for target(s) `package' is [init, compile, test, package]
Complete build sequence is [init, compile, test, package, clean, ]
init:
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
[mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
compile:
[mxmlc] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
[mxmlc] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf (58111 bytes)
test:
[flexunit] Validating task attributes ...
[flexunit] OS: [Linux]
[flexunit] Generating default values ...
[flexunit] Using the following settings for compilation:
[flexunit] FLEX_HOME: [/home/demomictay/sdk]
[flexunit] player: [flash]
[flexunit] sourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex"]
[flexunit] testSourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex"]
[flexunit] libraries: ["/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0- 8-as3_4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject /libs/flexunit-4.1.0-8-flex_4.1.0.16076.swc","/home/demomictay/proj/Fl exUnit4SampleCIProject/libs/flexunit-aircilistener-4.1.0-8-4.1.0.16076 .swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-ci listener-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4Samp leCIProject/libs/flexunit-flexcoverlistener-4.1.0-8-4.1.0.16076.swc"," /home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-uilistene r-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIPro ject/libs/fluint-extensions-4.1.0-8-4.1.0.16076.swc"]
[null] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
[null] '-jar'
[null] '/home/demomictay/sdk/lib/mxmlc.jar'
[null] '--version'
[null]
[null] The ' characters around the executable and arguments are
[null] not part of the command.
[null] Output redirected to property: SDK_VERSION
[flexunit] Found SDK version: 4
[flexunit] Created test runner at [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .mxml]
[flexunit] Compiling test classes: [org.flexunit.demo.EchoPanelTest, org.flexunit.demo.SampleTest]
[flexunit] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
[flexunit] '-Xmx256M'
[flexunit] '-jar'
[flexunit] '/home/demomictay/sdk/lib/mxmlc.jar'
[flexunit] '+flexlib'
[flexunit] '/home/demomictay/sdk/frameworks'
[flexunit] '-output'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .swf'
[flexunit] '-source-path'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-4.1.0-8-as3_4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-4.1.0-8-flex_4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-aircilistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-cilistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-flexcoverlistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-uilistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f luint-extensions-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-debug=false'
[flexunit] '-headless-server=true'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .mxml'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[null] Error redirected to property: MXMLC_ERROR
[null] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
[null] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner. swf (104083 bytes)
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [/home/demomictay/sdk]
[flexunit] haltonfailure: [true]
[flexunit] headless: [true]
[flexunit] display: [7000]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/report]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Starting xvnc
[flexunit] Attempting start on :7000 ...
[flexunit] Executing 'vncserver' with arguments:
[flexunit] ':7000'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit]
[flexunit] New 'rdcesx09113:7000 (demomictay)' desktop is rdcesx09113:7000
[flexunit]
[flexunit] Starting applications specified in /home/demomictay/.vnc/xstartup
[flexunit] Log file is /home/demomictay/.vnc/rdcesx09113:7000.log
[flexunit]
[flexunit] Setting DISPLAY=:7000
[flexunit] Entry [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin] already available in local trust file at [/home/demomictay/.macromedia/Flash_Player/#Security/FlashPlayerTrust /flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to allocate the agent. Exitting...
[flexunit] Failed to invoking the agent: No such file or directory
[flexunit] Cannot launch the agent
[flexunit] The messenger is now down
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
====================================================================== ============= -
Jackd - failed to open alsa seq
I did an update last night, and on reboot this morning jackd complains that it cannot open /dev/snd/seq due to Permission denied. I have already downgraded jackd to 0.118 to no avail - other noteworthy updates last night include the kernel & udev.
Here's the full output of jackd, followed by last night's additions to /var/log/pacman.log - any informed ideas would be appreciated.
12:17:41.391 Patchbay activated.
12:17:41.474 Statistics reset.
12:17:41.519 Could not open ALSA sequencer as a client. ALSA MIDI patchbay will be not available.
12:17:43.867 Startup script...
12:17:43.868 artsshell -q terminate
ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: Permission denied
sh: artsshell: command not found
12:17:44.277 Startup script terminated with exit status=32512.
12:17:44.278 JACK is starting...
12:17:44.278 /usr/bin/jackd -P89 -dalsa -r44100 -p1024 -n2 -Xseq -D -Chw:1,0 -Phw:1,0
jackd 0.118.0
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
Memory locking is unlimited - this is dangerous. You should probably alter the line:
@audio - memlock unlimited
in your /etc/limits.conf to read:
@audio - memlock 965454
12:17:44.302 JACK was started with PID=2221.
could not open driver .so '/usr/lib/jack/jack_firewire.so': libffado.so.2: cannot open shared object file: No such file or directory
JACK compiled with System V SHM support.
loading driver ..
apparent rate = 44100
creating alsa driver ... hw:1,0|hw:1,0|1024|2|44100|0|0|nomon|swmeter|-|32bit
control device hw:1
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 32bit integer little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 32bit integer little-endian
ALSA: use 2 periods for playback
ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: Permission denied
failed to open alsa seq
ALSA: cannot attach midi: -13
12:17:46.508 JACK connection change.
12:17:46.510 Server configuration saved to "/home/mark/.jackdrc".
12:17:46.512 Statistics reset.
12:17:48.311 Client activated.
12:17:48.311 Post-startup script...
12:17:48.312 jack_connect system:capture_11 system:playback_3; jack_connect system:capture_12 system:playback_4
12:17:48.750 Post-startup script terminated successfully.
12:17:48.751 JACK active patchbay scan...
12:17:48.753 patch: system:capture_11 -> system:playback_3 checked.
12:17:48.754 patch: system:capture_12 -> system:playback_4 checked.
[2011-06-02 01:04] Running 'pacman -Sy'
[2011-06-02 01:04] synchronizing package lists
[2011-06-02 01:05] starting full system upgrade
[2011-06-02 01:07] Running 'pacman -S -u'
[2011-06-02 01:07] starting full system upgrade
[2011-06-02 01:24] upgraded acpid (2.0.10-1 -> 2.0.10-2)
[2011-06-02 01:24] upgraded jack (0.120.1-1 -> 0.120.2-1)
[2011-06-02 01:24] upgraded allegro (4.4.1.1-2 -> 4.4.2-1)
[2011-06-02 01:24] upgraded apr (1.4.4-1 -> 1.4.5-1)
[2011-06-02 01:24] upgraded apr-util (1.3.11-1 -> 1.3.12-1)
[2011-06-02 01:24] upgraded bluez (4.93-1 -> 4.93-2)
[2011-06-02 01:24] upgraded boost-libs (1.46.0-4 -> 1.46.1-1)
[2011-06-02 01:24] upgraded boost (1.46.0-4 -> 1.46.1-1)
[2011-06-02 01:24] upgraded nspr (4.8.7-1 -> 4.8.8-1)
[2011-06-02 01:24] upgraded nss (3.12.9-1 -> 3.12.10-1)
[2011-06-02 01:24] upgraded chromium (11.0.696.68-1 -> 11.0.696.71-1)
[2011-06-02 01:24] upgraded startup-notification (0.10-2 -> 0.12-1)
[2011-06-02 01:25] upgraded claws-mail (3.7.9-2 -> 3.7.9-3)
[2011-06-02 01:25] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
[2011-06-02 01:25] upgraded deadbeef (0.5.0-2 -> 0.5.1-1)
[2011-06-02 01:25] upgraded glib2 (2.28.6-1 -> 2.28.7-1)
[2011-06-02 01:25] upgraded pango (1.28.4-2 -> 1.28.4-3)
[2011-06-02 01:25] upgraded gtk3 (3.0.9-2 -> 3.0.10-2)
[2011-06-02 01:25] upgraded libgnome-keyring (3.0.1-1 -> 3.0.3-1)
[2011-06-02 01:25] upgraded evince (3.0.0-4 -> 3.0.2-1)
[2011-06-02 01:25] upgraded flowcanvas (0.7.1-1 -> 0.7.1-2)
[2011-06-02 01:25] upgraded glew (1.5.8-1 -> 1.6.0-1)
[2011-06-02 01:25] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-1)
[2011-06-02 01:25] upgraded gnome-keyring (3.0.2-1 -> 3.0.3-1)
[2011-06-02 01:25] upgraded gnome-mplayer (1.0.3-2 -> 1.0.3-3)
[2011-06-02 01:25] upgraded goffice (0.8.14-1 -> 0.8.15-1)
[2011-06-02 01:25] upgraded gnumeric (1.10.14-1 -> 1.10.15-1)
[2011-06-02 01:25] upgraded parted (2.3-1 -> 2.4-1)
[2011-06-02 01:25] upgraded gparted (0.8.0-2 -> 0.8.1-1)
[2011-06-02 01:25] upgraded gperf (3.0.4-2 -> 3.0.4-3)
[2011-06-02 01:25] upgraded gtksourceview3 (3.0.1-1 -> 3.0.3-1)
[2011-06-02 01:25] upgraded libsoup (2.34.1-1 -> 2.34.2-1)
[2011-06-02 01:25] upgraded libsoup-gnome (2.34.1-1 -> 2.34.2-1)
[2011-06-02 01:25] upgraded gvfs (1.8.1-1 -> 1.8.2-1)
[2011-06-02 01:25] ATTENTION UDEV:
[2011-06-02 01:25] ---------------
[2011-06-02 01:25] Kernel 2.6.32 or newer is now required.
[2011-06-02 01:25] OSS emulation modules are not loaded by default, add to rc.conf if needed.
[2011-06-02 01:25] Arch specific cd symlinks are now no longer created.
[2011-06-02 01:25] cd and net persistent rules will no longer be autogenerated,
[2011-06-02 01:25] see <https://wiki.archlinux.org/index.php/Udev> for details.
[2011-06-02 01:25] Errors are now logged (possibly to the console) by default.
[2011-06-02 01:25] ---------------
[2011-06-02 01:25] upgraded udev (168-2 -> 171-1)
[2011-06-02 01:25] upgraded upower (0.9.10-1 -> 0.9.11-1)
[2011-06-02 01:25] upgraded udisks (1.0.3-2 -> 1.0.3-3)
[2011-06-02 01:25] upgraded kdelibs (4.6.3-2 -> 4.6.3-3)
[2011-06-02 01:26] >>> Updating module dependencies. Please wait ...
[2011-06-02 01:26] >>> MKINITCPIO SETUP
[2011-06-02 01:26] >>> ----------------
[2011-06-02 01:26] >>> If you use LVM2, Encrypted root or software RAID,
[2011-06-02 01:26] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2011-06-02 01:26] >>> More information about mkinitcpio setup can be found here:
[2011-06-02 01:26] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2011-06-02 01:26]
[2011-06-02 01:26] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-06-02 01:26] ==> Building image "default"
[2011-06-02 01:26] ==> Running command: /sbin/mkinitcpio -k 2.6.38-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2011-06-02 01:26] :: Begin build
[2011-06-02 01:26] :: Parsing hook [base]
[2011-06-02 01:26] :: Parsing hook [udev]
[2011-06-02 01:26] :: Parsing hook [autodetect]
[2011-06-02 01:26] :: Parsing hook [pata]
[2011-06-02 01:26] :: Parsing hook [scsi]
[2011-06-02 01:26] :: Parsing hook [sata]
[2011-06-02 01:26] :: Parsing hook [filesystems]
[2011-06-02 01:26] :: Generating module dependencies
[2011-06-02 01:26] :: Generating image '/boot/kernel26.img'...SUCCESS
[2011-06-02 01:26] ==> SUCCESS
[2011-06-02 01:26] ==> Building image "fallback"
[2011-06-02 01:26] ==> Running command: /sbin/mkinitcpio -k 2.6.38-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2011-06-02 01:26] :: Begin build
[2011-06-02 01:26] :: Parsing hook [base]
[2011-06-02 01:26] :: Parsing hook [udev]
[2011-06-02 01:26] :: Parsing hook [pata]
[2011-06-02 01:26] :: Parsing hook [scsi]
[2011-06-02 01:27] :: Parsing hook [sata]
[2011-06-02 01:27] :: Parsing hook [filesystems]
[2011-06-02 01:27] :: Generating module dependencies
[2011-06-02 01:27] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2011-06-02 01:27] ==> SUCCESS
[2011-06-02 01:27] upgraded kernel26 (2.6.38.6-2 -> 2.6.38.7-1)
[2011-06-02 01:27] upgraded less (443-1 -> 443-2)
[2011-06-02 01:27] upgraded libass (0.9.11-1 -> 0.9.12-1)
[2011-06-02 01:27] upgraded libftdi (0.18-2 -> 0.19-1)
[2011-06-02 01:27] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-1)
[2011-06-02 01:27] upgraded libmysqlclient (5.5.12-1 -> 5.5.13-1)
[2011-06-02 01:27] upgraded libpurple (2.7.11-3 -> 2.7.11-5)
[2011-06-02 01:27] upgraded libssh (0.4.8-1 -> 0.5.0-1)
[2011-06-02 01:27] upgraded libtorrent-rasterbar (0.15.6-1 -> 0.15.6-2)
[2011-06-02 01:27] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.4-1)
[2011-06-02 01:27] upgraded neon (0.29.3-3 -> 0.29.6-1)
[2011-06-02 01:27] upgraded ntrack (1:13-1 -> 1:13-2)
[2011-06-02 01:27] upgraded pidgin (2.7.11-3 -> 2.7.11-5)
[2011-06-02 01:27] upgraded pkg-config (0.25-3 -> 0.26-1)
[2011-06-02 01:27] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p180-2)
[2011-06-02 01:27] upgraded sox (14.3.2-2 -> 14.3.2-3)
[2011-06-02 01:27] upgraded spring (0.82.7.1-2 -> 0.82.7.1-4)
[2011-06-02 01:27] upgraded springlobby (0.131-1 -> 0.131-2)
[2011-06-02 01:27] upgraded sudo (1.8.1.p1-1 -> 1.8.1.p2-1)
[2011-06-02 01:27] upgraded thunar (1.2.1-2 -> 1.2.2-1)
[2011-06-02 01:27] upgraded totem-plparser (2.32.4-1 -> 2.32.5-1)
[2011-06-02 01:27] upgraded v4l-utils (0.8.3-1 -> 0.8.3-2)
[2011-06-02 01:27] upgraded vala (0.12.0-1 -> 0.12.1-1)
[2011-06-02 01:28] upgraded vlc (1.1.9-1 -> 1.1.9-3)
[2011-06-02 01:28] upgraded xfdesktop (4.8.2-1 -> 4.8.2-2)
[2011-06-02 01:28] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
[2011-06-02 01:28] upgraded xorg-server-common (1.10.1-1 -> 1.10.2-1)
[2011-06-02 01:28] upgraded xorg-server (1.10.1-1 -> 1.10.2-1)
[2011-06-02 01:28] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
[2011-06-02 01:28] upgraded xscreensaver (5.13-1 -> 5.14-1)
[2011-06-02 12:09] Running 'pacman -Sy'
[2011-06-02 12:09] synchronizing package lists
[2011-06-02 12:09] starting full system upgrade
[2011-06-02 12:12] Running 'pacman -U /home/mark/Packages/jack-0.118.0-4-i686.pkg.tar.xz'
[2011-06-02 12:12] upgraded jack (0.120.2-1 -> 0.118.0-4)OK, so it's a udev bug. Reloading the snd_seq module manually creates the node with the correct permissions, and jackd can now access it.
[mark@squid ~]$ ls -al /dev/snd/seq
crw------- 1 root audio 116, 1 Jun 2 12:17 /dev/snd/seq
[mark@squid ~]$ sudo modprobe snd_seq
Password:
[mark@squid ~]$ ls -al /dev/snd/seq
crw-rw---- 1 root audio 116, 1 Jun 2 13:26 /dev/snd/seq
A more permanent workaround seem to be to add snd_seq to the modules array in /etc/rc.conf , which I will try later.
EDIT: tried it, works. Thanks for the pointers, Karol
Last edited by markhadman (2011-06-03 12:17:17) -
[SOLVED] systemd --user: "Failed to open private bus connection:"
EDIT: The solution was to set DBUS_SESSION_BUS_ADDRESS, as suggested by gtmanfred in irc. By putting the following before executing systemd --user, the error vanished:
export DBUS_SESSION_BUS_ADDRESS=/run/user/$(id -u)/dbus/user_bus_socket
===================
Original problem:
Everything on my box appears to be working ok, but I'm getting this error consistently in tty1 and at the top of journalctl (as user) whenever I start systemd --user:
systemd[3975]: Failed to open private bus connection: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
I roughly have my system setup per this wiki section https://wiki.archlinux.org/index.php/Sy … ur_Session. I start systemd --user via a small script in my .bash_profile. Here are my relevant dbus{.service,socket} files, from the package user-session-units mentioned in the wiki: (Edit: xorg is started through xorg-launch-helper, also from that wiki page) Edit2: I'm not using autologin. I noticed that under the autologin section of that page, DBUS_SESSION_BUS_ADDRESS is set to some path. In my setup that isn't set anywhere, so I may try to copy that later but I don't have time to play with it right now. Will post back later.
=====/usr/lib/systemd/user/dbus.service=====
[Unit]
Description=D-Bus System Message Bus
Requires=dbus.socket
[Service]
ExecStart=/usr/bin/dbus-daemon --session --address=systemd: --nofork --systemd-activation
ExecReload=/usr/bin/dbus-send --print-reply --session --type=method_call --dest=org.freedesktop.DBus / org.freedesktop.DBus.ReloadConfig
=====/usr/lib/systemd/user/dbus.socket=====
[Unit]
Description=D-Bus System Message Bus Socket
[Socket]
ListenStream=%t/dbus/user_bus_socket
And the output of sudo systemctl status dbus:
dbus.service - D-Bus System Message Bus
Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
Active: active (running) since Tue 2013-02-05 14:50:30 EST; 22min ago
Main PID: 369 (dbus-daemon)
CGroup: name=systemd:/system/dbus.service
└─369 /usr/bin/dbus-daemon --system --address=systemd: --no...
Feb 05 14:50:30 sellers-laptop systemd[1]: Starting D-Bus System Message Bus...
Feb 05 14:50:30 sellers-laptop systemd[1]: Started D-Bus System Message Bus.
Feb 05 14:51:18 sellers-laptop dbus-daemon[369]: dbus[369]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Feb 05 14:51:18 sellers-laptop dbus[369]: [system] Activating via systemd: service name='org.freedesktop.Avahi' unit='dbus-org.freedesktop.Avahi.service'
Feb 05 14:51:18 sellers-laptop dbus[369]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
Feb 05 14:51:18 sellers-laptop dbus-daemon[369]: dbus[369]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.Avahi.service': Unit dbus-org.freedesktop.Avahi.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.freedesktop.Avahi.service' for details.
I'm not sure what the error even means or how to go about debugging it. Any suggestions would be appreciated.
Last edited by Feynman (2013-02-05 22:07:23)NVM...didn't notice it was already solved.
Last edited by the sad clown (2013-02-05 22:33:10) -
Wireless: wpa_supplicant failed to open config file [SOLVED]
Hi,
I'm having trouble configuring my wireless network. At the moment I'm following the guide from the wiki, I can scan for networks but when i try to connect with wpa_supplicant I get following error:
Successfully initialized wpa_supplicant
Failed to open config file '/dev/fd/63', error: No such file or directory
Failed to read or parse configuration '/dev/fd/63'.
So far I've tried to google the problem, but haven't found a solution that works. I hope you can point me in the right direction.
Additional info:
'ip link' provide following output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wwp0s29u1u4i6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 02:80:37:ec:02:00 brd ff:ff:ff:ff:ff:ff
3: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 00:24:d7:af:98:dc brd ff:ff:ff:ff:ff:ff
4: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether f0:de:f1:53:66:eb brd ff:ff:ff:ff:ff:ff
And lspci:
lspci -k | grep Network
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35)
And dmesg:
dmesg | grep firmware
[ 2.379351] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 2.379368] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 2.382114] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 8.560626] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
I guess it have something to do with the firmware, but I'm not sure, as when I googled the problem I stumbled upon a site stating that the wireless card should be supported by the kernel.
Last edited by cube2 (2015-01-07 14:00:34)Yes it is on the same line as this:
sudo wpa_supplicant -D nl80211,wext -i wlp3s0 -c <(wpa_passphrase "SSID" "key")
systemtcl list-units
systemctl list-units
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-backlight-acpi_video1.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/backlight/acpi_video1
sys-devices-pci0000:00-0000:00:01.0-0000:01:00.0-drm-card0-card0\x2dLVDS\x2d1-nv_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-LVDS-1/nv_backlight
sys-devices-pci0000:00-0000:00:02.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:02.0-drm-card1-card1\x2dLVDS\x2d2-intel_backlight.device loaded active plugged /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-LVDS-2/intel_backlight
sys-devices-pci0000:00-0000:00:16.3-tty-ttyS0.device loaded active plugged 6 Series/C200 Series Chipset Family KT Controller
sys-devices-pci0000:00-0000:00:19.0-net-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0-rfkill2.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0/rfkill2
sys-devices-pci0000:00-0000:00:1a.0-usb3-3\x2d1-3\x2d1.4-3\x2d1.4:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chipset Family High Definition Audio Controller
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-ieee80211-phy0-rfkill3.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0/ieee80211/phy0/rfkill3
sys-devices-pci0000:00-0000:00:1c.1-0000:03:00.0-net-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.1-tty-ttyACM0.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.3-tty-ttyACM1.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.6-net-wwp0s29u1u4i6.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1d.0-usb4-4\x2d1-4\x2d1.4-4\x2d1.4:1.9-tty-ttyACM2.device loaded active plugged F5521gw
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged INTEL_SSDSA2M160G2LE 1
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged INTEL_SSDSA2M160G2LE 2
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged INTEL_SSDSA2M160G2LE
sys-devices-pci0000:00-0000:00:1f.2-ata2-host1-target1:0:0-1:0:0:0-block-sr0.device loaded active plugged MATSHITADVD-RAM_UJ8A2
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-devices-platform-thinkpad_acpi-rfkill-rfkill0.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill0
sys-devices-platform-thinkpad_acpi-rfkill-rfkill1.device loaded active plugged /sys/devices/platform/thinkpad_acpi/rfkill/rfkill1
sys-devices-platform-thinkpad_acpi-sound-card29.device loaded active plugged /sys/devices/platform/thinkpad_acpi/sound/card29
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-enp0s25.device loaded active plugged 82579LM Gigabit Network Connection
sys-subsystem-net-devices-wlp3s0.device loaded active plugged Centrino Ultimate-N 6300 (3x3 AGN)
sys-subsystem-net-devices-wwp0s29u1u4i6.device loaded active plugged F5521gw
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000.mount loaded active mounted /run/user/1000
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-c1.scope loaded active running Session c1 of user jakob
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running dhcpcd on enp0s25
[email protected] loaded active running Getty on tty1
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:acpi_video1.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video1
systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:intel_backlight
systemd-backlight@backlight:nv_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backlight:nv_backlight
systemd-fsck@dev-disk-by\x2duuid-69c2b129\x2dd95a\x2d48f7\x2d84de\x2d058ba5f97b42.service loaded active exited File System Check on /dev/disk/by-uuid/69c2b129-d95a-48f7-84de-058ba5f97b42
systemd-journal-flush.service loaded active exited Trigger Flushing of Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill1
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill2
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill3
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
pstree
systemd─┬─chromium─┬─chrome-sandbox───chromium─┬─chrome-sandbox───nacl_helper
│ │ └─chromium─┬─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/662}
│ │ │ └─{WorkerPool/663}
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ └─{OptimizingCompi}
│ │ ├─12*[chromium─┬─2*[{Blink GC Sweepe}]]
│ │ │ ├─2*[{Blink Heap Mark}]]
│ │ │ ├─{Chrome_ChildIOT}]
│ │ │ ├─{CompositorRaste}]
│ │ │ ├─{Compositor}]
│ │ │ ├─{HTMLParserThrea}]
│ │ │ └─{OptimizingCompi}]
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{CompositorRaste}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/155}
│ │ │ └─{WorkerPool/156}
│ │ ├─chromium─┬─2*[{Blink GC Sweepe}]
│ │ │ ├─2*[{Blink Heap Mark}]
│ │ │ ├─{Chrome_ChildIOT}
│ │ │ ├─{CompositorRaste}
│ │ │ ├─{Compositor}
│ │ │ ├─{HTMLParserThrea}
│ │ │ ├─{OptimizingCompi}
│ │ │ ├─{WorkerPool/666}
│ │ │ └─{WorkerPool/667}
│ │ └─chromium─┬─{AudioOutputDevi}
│ │ ├─2*[{Blink GC Sweepe}]
│ │ ├─2*[{Blink Heap Mark}]
│ │ ├─{Chrome_ChildIOT}
│ │ ├─{CompositorRaste}
│ │ ├─{Compositor}
│ │ ├─{FFmpegDemuxer}
│ │ ├─{HTMLParserThrea}
│ │ ├─{Media}
│ │ ├─{OptimizingCompi}
│ │ ├─{WorkerPool/688}
│ │ └─{WorkerPool/693}
│ ├─chromium─┬─chromium
│ │ ├─{Chrome_ChildIOT}
│ │ └─{Watchdog}
│ ├─{AudioThread}
│ ├─{Blink GC Sweepe}
│ ├─2*[{Blink Heap Mark}]
│ ├─3*[{BrowserBlocking}]
│ ├─{BrowserWatchdog}
│ ├─3*[{CachePoolWorker}]
│ ├─{Chrome_CacheThr}
│ ├─{Chrome_DBThread}
│ ├─{Chrome_FileThre}
│ ├─{Chrome_FileUser}
│ ├─{Chrome_HistoryT}
│ ├─{Chrome_IOThread}
│ ├─{Chrome_ProcessL}
│ ├─{Chrome_SafeBrow}
│ ├─{Chrome_SyncThre}
│ ├─{CrShutdownDetec}
│ ├─{IndexedDB}
│ ├─{LevelDBEnv.IDB}
│ ├─{LevelDBEnv}
│ ├─{NSS SSL ThreadW}
│ ├─{NetworkChangeNo}
│ ├─{OptimizingCompi}
│ ├─2*[{Proxy resolver}]
│ ├─{WorkerPool/1890}
│ ├─{WorkerPool/1936}
│ ├─{chromium}
│ ├─{extension_crash}
│ ├─{gpu-process_cra}
│ ├─{handle-watcher-}
│ ├─{inotify_reader}
│ ├─{renderer_crash_}
│ └─{sandbox_ipc_thr}
├─2*[dbus-daemon]
├─dbus-launch
├─dhcpcd
├─login───startx───xinit─┬─Xorg.bin─┬─xf86-video-inte
│ │ └─{Xorg.bin}
│ └─awesome───{gmain}
├─systemd───(sd-pam)
├─systemd-journal
├─systemd-logind
├─systemd-udevd
├─xterm───bash───pstree
└─xterm───bash -
"Failed to open the connection" problem related to multiple tables in the report?
Post Author: Gadow
CA Forum: Data Connectivity and SQL
System specifics:
Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
Crystal Reports 2008, v. 12.0.0.549, Full
We have set up the following method for displaying reports via our website:
User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
The page is rendered and the user gets the filtered report.
We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
Dim o As Object = Session("ReportParams")
Dim ReportURL As String = ""
'Verify that there is a ReportParameters object
If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
Response.Redirect("/errors/MissingReport.aspx")
End If
ReportParams = CType(o, ReportParameters)
'Verify that the report exists
ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
ReportPath = Server.MapPath(ReportURL)
If Not File.Exists(ReportPath) Then
Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
End If
InitializeReport()
End Sub
Protected Sub InitializeReport()
Dim RD As New ReportDocument
Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
RD.Load(ReportPath)
If ReportParams.SelectString <> "" Then
Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
Dim DS As New Data.DataSet
Adapt.Fill(DS)
RD.SetDataSource(DS.Tables(0))
End If
For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
Dim FFD As FormulaFieldDefinition = Nothing
Try
FFD = RD.DataDefinition.FormulaFields(kvp.Key)
Catch ex As Exception
'Do nothing
End Try
If FFD IsNot Nothing Then
Select Case FFD.ValueType
Case FieldValueType.DateField, FieldValueType.DateTimeField
If IsDate(kvp.Value) Then
FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
Else
FFD.Text = "Date(1960, 01, 01)"
End If
Case FieldValueType.StringField
FFD.Text = String.Format("""""", kvp.Value)
Case Else
'For now, treat these as if they were strings. If things blow up here,
'we will need to add the appropriate formatting for the field type.
FFD.Text = String.Format("""""", kvp.Value)
End Select
End If
Next
For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
Dim TLI As TableLogOnInfo = T.LogOnInfo
TLI.ConnectionInfo = CI
T.ApplyLogOnInfo(TLI)
Next
DisplayedReport.ReportSource = RD
End Sub
Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.Dear Dixit,
Please refer to the Crystal report landing page to get the details
information about the support for crystal report issues.
Please use the following thread to post your questions related to
crystal report.
SAP Business One and Crystal Reports
Regards,
Rakesh Pati
SAP Business One Forum Team. -
Unable to install OSNConnector from PIA setup script
I'm trying to install the FIN/SCM PeopleSoft eProcurement application package (OSNConnector) from the PIA setup script. Per the instrucitons, I run the PIA setup (in $PS_HOME/setup/PsMpPIAInstall). When I select "Deploy additional PeopleSoft application extensions" and then check "FIN/SCM PeopleSoft eProcurement," the installation seems to complete and there are no errors generated. Per the instructions, once the install is complete, it should have deployed the following files (listed below), but none of them are present.
%PS_HOME%\webserv\PSDomain name\applications\peoplesoft\PSIGW\
WEB-INF\classes\com\peoplesoft\pt\integrationgateway\listeningconnector\fscm_epo_OSNListeningConnector.class
%PS_HOME%\webserv\PSDomain name\applications\peoplesoft\PSIGW\
WEB-INF\classes\com\peoplesoft\pt\integrationgatewaytargetconnector\fscm_epo_OSNTargetConnector.class
%PS_HOME%\webserv\PSDomain name\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\fscm\epo\servlet\Support\fscm_epo_EproRequestException.class
%PS_HOME%\webserv\PSDomain name\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\fscm\epo\servlet\Support\fscm_epo_ExtendXml.class
%PS_HOME%\webserv\PSDomain name\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\fscm\epo\servlet\Support\fscm_epo_EproOsnAttacher.class
%PS_HOME%\webserv\PSDomain name\applications\peoplesoft\PSIGW\WEB-INF\classes\com\peoplesoft\fscm\epo\servlet\Support\fscm_epo_FTPClient.class
I've searched for fscm*.class and the files aren't located anywhere. The only thing I can think of is that maybe the fscm_epo_ws.ear file is in the wrong location. Per the instructions, the fscm_epo_xx.ear files are located in $PS_HOME/setup/PsMpPIAInstall/archives; but should they be in another location? I'm having the exact same problem with our WebSphere PIA and WebLogic PIA (both using the same PT and FSCM versions)
Is there a known problem with this? Does anyone have experience installing the OSN Connector on PT 8.50 / FSCM 9.1?
My environment is PeopleTools 8.50.09, FSCM 9.1r1 and I've duplicated this issue on an AIX lpar with WebSphere 7, and a RHEL server with WebLogic 10. I do have a SR open with Oracle. So far, they've suggested that the class files don't show up until after the web server is restarted. I've tried that in a few different environments with no success.
Any help and/or insight would be much appreciated. Thanks.Were you able to resolve this problem? I am trying to do the same thing here and we are not seeing the EAR files either. Any guidance you can give would be appreciated.
-
Failed to open service OracleDEV102TNSListener , error 1060
Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
<b>ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor</b>".
I have set the all the Environment variables , i run r3trans -d and the result is
<b>C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).</b>
<b>I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"</b>
Event Viewer result is
<b>----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.</b>
finally in SAPINST logs i could see
<b>
Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully</b>
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards, -
New to Windows Server 2008 R2 Administration.
I setup this Windows 2008 R2 Server on a Dell 2950 Poweredge server and have been migrating users off of an old NT style domain running on Samba 3.6 on CentOS.
I have the domain setup (nicholas.sacredheartsaratoga.org), added users, and have moved users / computers over to the new domain and working.
When attempting to setup Group Policy Objects, I continually get the "Failed to Open Group Policy Object" Error. This is driving me nuts and seems to be a 49 error.. which I have done a ton of research on but none of the suggested fixes seem
to be working.
I've been working at this for a couple of weeks and really need this fixed to be able to set GPO's correctly.
Here is my IPCONFIG /ALL
C:\Users\Administrator.NICHOLAS.000>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : NICHOLAS
Primary Dns Suffix . . . . . . . : sacredheartsaratoga.org
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : nicholas.sacredheartsaratoga.org
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS
VBD Client) #2
Physical Address. . . . . . . . . : 00-1D-09-27-F1-63
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::542:43f2:2aaf:d903%13(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.20.21(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.20.3
DHCPv6 IAID . . . . . . . . . . . : 301997321
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-7D-DC-B6-00-1D-09-27-F1-61
DNS Servers . . . . . . . . . . . : 10.10.20.21
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{41653A38-9372-4740-BB03-41950A9C9BC0}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : YesWill post the entire contents of my gpreport as soon as my account is verified... but this is the jist of the error being reported:
Component Status<v:group alt="Error" class="vmlimage" coordsize="100,100" style="width:15px;height:15px;vertical-align:middle;"><v:oval class="vmlimage" fillcolor="red" strokecolor="red" style="width:100px;height:100px;"></v:oval><v:line
class="vmlimage" from="25,25" strokecolor="white" strokeweight="3px" style="" to="75,75"></v:line><v:line class="vmlimage" from="75,25" strokecolor="white" strokeweight="3px" style="" to="25,75"></v:line></v:group>
Component Name
Status
Last Process Time
Group Policy Infrastructure
Failed
2/17/2014 2:50:06 PM
Group Policy Infrastructure failed due to the error listed below.
Logon failure: unknown user name or bad password.
Note: Due to the GP Core failure, none of the other Group Policy components processed their policy. Consequently, status information for the other components is not available.
Additional information may have been logged. Review the Policy Events tab in the console or the application event log for events between 2/17/2014 2:50:05 PM and 2/17/2014 2:50:06 PM.
Registry
(N/A)
1/4/2014 1:45:29 PM
Security
(N/A)
1/4/2014 1:45:35 PM
User Configuration Summary -
Failed to open the connection. Error in the Designer when copying ...
I have two different systems I am developing an application on.
I copy the entire directory from one system to the other. Both systems have the same environment:
Visual Studio 2010
Crystal Reports for Visual Studio 2010 (the production release, or I think it is the vesion is 13.0.2.0 is the version on the assemblies)
SQL 2008 R2
Today, I started adding Crystal reports to this VS solution. I have a reportdriver class that exports all the reports to an HTTP Stream, but we can sit that aside for now. The problem I am having is strictly with the integrated designer.
I have a bunch of existing reports written for an old Sybase databse. I have ported them to SQL and the table structure matches. I simply add the report to my project, point it to the new datasource (using "Set Datasource Location" - OLE ADO SQL) and then preview the report to be sure it runs.
I am just using "localhost" as my server name for the OLE connection so I...in theory... don't have to change the data source to view it on the other system. Both systems have SQL 2008 R2 installed locally. For my login credentials, I use SQL Security and use the same database login/password on both development machines andthe production server.
Today, I copied my entire project to the other PC (as I do almost every day).. When I open any of the reports (in VS) and try to preview them I get:
Failed to open the connection.
Details: ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provide for SQL Server
Description: [DBNETLIB][ConnectionOpen (Connect().]SQL Server does not exist or access denied.
SQL State: 08001
Native Error: 17 [Database Vendor Code: 17]
I can only guess that I am using two different OLE ADO drivers on the two systems or there is something embedded in the rport or somewhere in my solution that "knows" I am not really on the same system that I initially set them up on and previewd them with.
Am I on the right track? Any idea how I can fix this? Obviously, I don't want to have to setup the datasource for every report in my application (if I do that, the report works) when I copy it from the development to the production server.
I am in a real bind here and under a fast aproaching deadline. Any help is much appreciated!!!
ShayneDon't use localhost as your server name. It's a reserved name and should not be used in code.
Try this also [Kbase |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333433363339%7D.do] SAP Note 1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
Edited by: Don Williams on Jan 30, 2011 6:02 AM -
Failed to Open FR report With Error code 500 - 'unable to process request'
I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServerIt is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com -
CR2008 - Failed to open the connection. Failed to open the connection. ...
Getting the following error when running CR2008 reports from web server:
"Failed to open the connection. Failed to open the connection. <report_name>{2585477E-FB02-4594-9DB5-FFBFF2ABE124}.rpt"
The web server is a Windows Server 2008 x64. The IIS7 application pool is configured for 32bit, which solved our initial problem. We are getting the above error if we use either CR2008 or CR2008 SP1. Same issue with CRRuntime_12_1_mlb.exe.
If we load CR2008 onto the web server, we can open and run the reports. Thus, there appears to be no problem with the reports or the data source (an Access database). Web application runs on development machine (windows xp).
Why is there a GUID in the report file name? How can we resolve this issue or what else should we check?
TIA, Gary.Figured it out. Turns out the ODBC data source name had been setup incorrectly. Became obvious when stepping through the code.
Maybe you are looking for
-
Iphone 6 won't work with my Bluetooth in car- Apple needs to admit this is issue and fix it!
Ever since I got my IPhone 6 two weeks ago it has failed to make any type of connection with my GM car Blue Tooth device. I have read the forums on here and attempted all the fixes- none of them worked. Reset just about everything on the phone, res
-
Can no longer see my purchased books in Adobe Digital Edition software
Because my purchased books are no longer listed on my Adobe Digital Edition software, they can no longer be downloaded into my E-Reader (due to Rights protection). I do not understand why they disappeared from the Purchased list. I would like Adobe
-
PDF Opening in Adobe reader with previous/next buttons always showing
Is there any way to make it so when a specific pdf is opened in Adobe Reader, it always opens with the previous and next buttons showing, regardless of the user's settings? Thanks in advance.
-
WLC 5508 with LAP-1142n - Several Errors
Hello all, I had installed a WLC 5508 with 7 LAP 1142n and 2 converted AP 1131abg. I am seeing some errors relating 2 issues. 1st- One particular AP 1142 is disassociating and reseting the radios. /* Style Definitions */ table.MsoNormalTable {mso-sty
-
Dear PP gurus, I have a question about batch valuation. If i have a batch which is 100% pure thats why its value is motre than of 80% pure. i want valuate these two batches separetely. how can i do it.Please help. thanks sanket