Failed to process inbox; contact your administrator
Hi All,
I have created Service Order Application which is explained in help.sap.com. As per the scenario i have created
2 tables ZTR_ORDER_HDR and ZTR_ORDER_ITM ,
2 Nodes ORDERHEADER and ORDERITEM under ORDER Standard Data Object,
3 BAPI Wrappers ZTR_ORDER GETLIST*, *ZTRORDER_GETDETAIL and ZTR_ORDER_MODIFY,
finally i created Mobile Service Compopnent and Mobile UI Component for Handhelds using NWDS.
Application Deployed Successfully, after launching the simulator it is showing empty table (with out data).
I tried to sync but Device not registered error coming.
I created the same application using Mobile UI Component for Laptop, after launching the MobileWebdynpro Client it is showing Deployable Components. When i click on Process Now button Failed to process inbox, contact your administrator error. But Synchronization is successful here.
one more thing i am not defining any Distribution Model Category and Rules. when i checked in sdoe_wd tcode data is showing in CDS tables.
Pls advise me anyone what i missed in the above scenario. What i will have to do next.
Thanks&Regards
Murthy
it was resolved by me.
thanks
murthy
Similar Messages
-
Error: Processing failed-internal server error; contact your administrator
Dear All,
I upgraded to SAP Business One 8.82 PL04 (on Server Windows 2003 with SQL2008R2) and iPhone is in 1.5.0.
Having this error in my iPhone. I don't know why. In older versions i can connect correctly.
I already set all the possible cause of this error. I already do the steps in preventing this, but it still exist. Please help.
I just read lots of solution for this.
The B1i is working.
The other scenarios are working.
The Localhost is working with port 8080.
The License is working.
The B1iServer is working.
The B1DI and JDBC are connected successfully.
The associatedSrvI (dbserver/dbname) is working. There is no instance.
The Scenario is already active.
The DI Server, Proxy, Service Monitoring are started. Although I restarted them to refresh connection.
The SSL is On.
The enforce secure transport is set to True.
Activated and deactivated the scenario a lot of times.
The license of B1i and manager and his configurations are ok, UDID, Phone number.
If i go to https://myserver.es:8443 with safari y can logon to the integration framework.
No Case sensitive for username/password.
Check to make sure the DI Proxy service is started.
No use the IP Address instead of the username in the SrvIP association for WS Mobile.
But still got this error
Thanks.
Gonzalo GómezJust to be sure, you did run through the [troubleshooting guide|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1602674]?
-
Hi,
I am developing 7.1 Laptop application, when I deploy the application and model DC locally and then start the client, I get the newly deployed application in the mobile client but when I clicn on Process now , it gives error message 'Failed to process inbox contact system administrator'. In the trace file i get this error
<r id="1276616336432" t="21:08:56" d="2010-06-15" s="E" c="000" u="" g="" m="Exception occurred when processing deployment inbox
[EXCEPTION]
java.lang.NullPointerException
at com.sap.tc.mobile.cfs.compat.jspfwk.JSPFramework.isResponsible(JSPFramework.java:402)
at com.sap.tc.mobile.cfs.framework.FrameworkManagerImpl.findFramework(FrameworkManagerImpl.java:162)
at com.sap.tc.mobile.cfs.deploy.impl.InstallationHelper.processDeploymentStatusObjects(InstallationHelper.java:104)
at com.sap.tc.mobile.cfs.deploy.impl.DeploymentManagerImpl.doProcessInbox(DeploymentManagerImpl.java:276)
at com.sap.tc.mobile.cfs.deploy.impl.DeploymentManagerImpl.processInbox(DeploymentManagerImpl.java:229)
at com.sap.tc.mobile.mwd.laptop.container.InstallationPackage.onActionInstallNow(InstallationPackage.java:215)
at com.sap.tc.mobile.mwd.laptop.container.wdp.InternalInstallationPackage.wdInvokeEventHandler(InternalInstallationPackage.java:152)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:131)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:72)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:156)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:91)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:161)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:109)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:96)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:469)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientimpl.scxml.client.SmartClient.executeTasks(SmartClient.java:671)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1439)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1259)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:158)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:88)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:81)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:643)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:663)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:594)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:304)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:701)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:233)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.WebDynproRequestHandler.handleRequest0(WebDynproRequestHandler.java:189)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.WebDynproRequestHandler.handleRequest(WebDynproRequestHandler.java:127)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.AbstractRequestHandler.handleRequest(AbstractRequestHandler.java:306)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.handleRequest0(SimpleHttpServer.java:247)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.handleRequest(SimpleHttpServer.java:215)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.run(SimpleHttpServer.java:164)
at java.lang.Thread.run(Thread.java:595)
Regards,
PriyaTHE EXCEPTION IS BELOW
<r id="1276616336432" t="21:08:56" d="2010-06-15" s="E" c="000" u="" g="" m="Exception occurred when processing deployment inbox
[EXCEPTION]
java.lang.NullPointerException
at com.sap.tc.mobile.cfs.compat.jspfwk.JSPFramework.isResponsible(JSPFramework.java:402)
at com.sap.tc.mobile.cfs.framework.FrameworkManagerImpl.findFramework(FrameworkManagerImpl.java:162)
at com.sap.tc.mobile.cfs.deploy.impl.InstallationHelper.processDeploymentStatusObjects(InstallationHelper.java:104)
at com.sap.tc.mobile.cfs.deploy.impl.DeploymentManagerImpl.doProcessInbox(DeploymentManagerImpl.java:276)
at com.sap.tc.mobile.cfs.deploy.impl.DeploymentManagerImpl.processInbox(DeploymentManagerImpl.java:229)
at com.sap.tc.mobile.mwd.laptop.container.InstallationPackage.onActionInstallNow(InstallationPackage.java:215)
at com.sap.tc.mobile.mwd.laptop.container.wdp.InternalInstallationPackage.wdInvokeEventHandler(InternalInstallationPackage.java:152)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:131)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:72)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:156)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:91)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:161)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:109)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:96)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:469)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientimpl.scxml.client.SmartClient.executeTasks(SmartClient.java:671)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1439)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1259)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:158)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:88)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:81)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:643)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:663)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:594)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:304)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:701)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:233)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.WebDynproRequestHandler.handleRequest0(WebDynproRequestHandler.java:189)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.WebDynproRequestHandler.handleRequest(WebDynproRequestHandler.java:127)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.AbstractRequestHandler.handleRequest(AbstractRequestHandler.java:306)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.handleRequest0(SimpleHttpServer.java:247)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.handleRequest(SimpleHttpServer.java:215)
at com.sap.tc.mobile.mwd.runtime.fwk.dispatcher.http.SimpleHttpServer.run(SimpleHttpServer.java:164)
at java.lang.Thread.run(Thread.java:595)
">
<f n="SourceName" v="com.sap.tc.mobile.mwd.laptop.container.InstallationPackage"/>
<f n="LocationName" v="com.sap.tc.mobile.mwd.laptop.container.InstallationPackage"/>
<f n="ThreadName" v="Thread[Thread-2,5,main]"/>
<f n="GroupLevel" v="0"/>
<f n="GroupIndent" v="0"/>
<f n="MsgType" v="Java"/> -
I am trying to download the InDesign CS5.5 update and keep getting "Update Failed" "Please contact your Administrator if you wish to apply updates on your machine". I have done this and now have Administrator rights, but I am still getting the message. How do I apply the update?
Direct Updates
https://www.adobe.com/downloads/updates/ -
Hi,
I'm not able to access the term store. I get an below mentioned error.
"The Managed Metadata Service or Connection is currently not available. The Application Pool or Managed Metadata Web Service may not have been started. Please Contact your Administrator. "
Since this is happening on my local machine (Dev environment). I have full control on the term store and the all the site collections.
Hence, this is not a permission issue.
I have checked, the Metadata service is active on the machine. All the application pools in IIS is running.
After reading one of the recommendation on internet, I created a new Managed Metadata Service.
After which I was able access both (old and new) MMS from Central Admin only (highlight the MMS from manage service applications and click Manage ) and not from the site collection (term store management).
Now again its not working after I did an IISRESET.
The managed metadata service (Managed Metadata Service Connection) is grayed out.
ULS Error says:
Failed to create ManageLink for service proxy 'Managed Metadata Service'. Exception: System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout
value on the Binding. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/7a91ec90b46843e995c144be48d804f0/MetadataWebService.svc' has exceeded the allotted
timeout of 00:00:09.9990000. The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
Please let me know if you need more information.Hi Victoria,
Thanks for your reply
I tried making all the changes you had recommended and which are mentioned in the link you have provided.
I tried making all possible combination of changes to the web.config and client.config files but it does not make any difference to the environment.
One thing is that, my error in ULS logs has changed.
Error 1:
Exception returned from back end service. System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted
to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
Error 2:
Error encountered in background cache check System.TimeoutException: The request channel timed out attempting to send after 00:00:09.9999999. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time
allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The HTTP request to 'http://mitkar4:32843/b1640facdf8b49b0886fea1bd37b8eb3/MetadataWebService.svc' has exceeded the allotted timeout of 00:00:09.9990000.
The time allotted to this operation may have been a portion of a longer timeout. ---> System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream() --- End of inner exception stack trace ---
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout) --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout) at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication.GetServiceSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2f.<ReadApplicationSettings>b__2e(IMetadataWebServiceApplication serviceApplication)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2b()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.<>c__DisplayClass2c.<RunOnChannel>b__2a()
at Microsoft.Office.Server.Utilities.MonitoredScopeWrapper.RunWithMonitoredScope(Action code)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.RunOnChannel(CodeToRun codeToRun, Double operationTimeoutFactor)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.ReadApplicationSettings(Guid rawPartitionId)
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.get_ServiceApplicationSettings()
at Microsoft.SharePoint.Taxonomy.MetadataWebServiceApplicationProxy.TimeToCheckForUpdates()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.CheckForChanges()
at Microsoft.SharePoint.Taxonomy.Internal.TaxonomyCache.<LoopForChanges>b__0(). -
Hi All
I am working on the POWL inbox in portal 7.3 sp11 .
I have used
Application Name : IBO_WDA_INBOX
Configuration Name: IBO_WDAC_POWL_INBOX
for integration into portal by using webdynpro abap iview template .
We are able to get the task and notification in powl inbox .
But when we click on task item it throwing an error .
There is no iView available for system "SAP_ERP_Common": object "SWF_WIOBN". For more information, contact your administrator.
Can you please provide me any steps how to implement the powl inbox inorder to get the UWL Tasks and notifications into this powl inbox .
And how to resolve the above error .
Thanks & Regards
DeepikaHi Deepika,
Please go through the below SAP notes:
1854661 - The error "There is no iView available for system "XYZ", object "ABC" is encountered when navigating in an MSS or HR Administrator Portal role
1494536 - Object Based Navigation - Specific Component Note
Apart from this, you can also go through the following link:
http://wiki.scn.sap.com/wiki/display/EP/Object+Based+Navigation+-+OBN+Wiki
BR,
Anurag -
Can anyone help with this error message?
Description:
: URL: /PerformanceManagement/jsp/dm-getpage.jsp? url=AfQJDRWQ3WNOtAoCRk5MQ4U
Stack Trace: {"Error":{"error":"null","PageError1":"Your request cannot be processed. Contact your Business Objects administrator.","PageError6":"Description: ","PageError9":"Error: ","PageError8":"Stack Trace: ","stacktrace":"","desc":"URL: /PerformanceManagement/jsp/dm-getpage.jsp? url=AfQJDRWQ3WNOtAoCRk5MQ4U","type":4}}Hi,
I'm on a 3.1 SP7 version, and some times I face this problem.
I'm not sure, but when I have many users exporting reports to Excel, this problem is more probably.
I read a workaround, but I didn't try it (because my problem is intermittent)
- Increase the cache size from initconfig.properties file up to 4096 (500 by default)
If this step doesn't work the try:
- Increase the stack size of Performance Management servers; changing (command line) -JTCss 1024 (default value) to -JTCss 2048
Another workaround: this problem just appear in our environment with IE8; if we try with Firefox the behaviour is perfect -
I understand that the mods here can't possibly reply to everyone who has a post pulled for ToU. One can vaguely try to contact an administrator indirectly, perhaps, by posting here. (When this takes the form of a "why was my post pulled" post, this usually starts a discussion of some kind, which may or may not have any value, but which almost always fails to elicit any direct participation of the Hosts, and gives the impression, at least, it's being completely ignored by them.)
Since there is no way of directly contacting an administrator, either for ToU or for any other reason, which this appears to suggest is possible, why not just get rid of it?>...although the OP's question still remains....
I'm now referred to as the OP?
If you got the email with content for the "final straw" post, which was mine, then you will know what I wrote. I already had one post pulled in that thread for a ToU and I did receive the obligatory email for that. I did not receive an email for the "final straw" post. Just the entire thread got pulled almost immediately at that point.
Everything I am writing here now is deliberately being veiled and obscured to the limit possible without losing all meaning and just turning this into noise. No one who didn't receive that email content for my post will have any very clear idea what this is all about.
My "final straw" comments related to several things: some copyright issues concerning the site under discussion; the ToU of that site as, in fact, necessarily prohibiting even the linking of content from that site, and an attempt to differentiate, in general, between what is illegal and what is a violation of the ToU, and not illegal, as such, for any service on any site. I'm not opening all of that up again here, since whatever it was I wrote will probably just get this post pulled.
All I can say is I attempted assiduously to stay clear of the Apple ToU violation for which I was cited by the Apple email in my earlier post which was pulled -- or any ToU violation, for that matter. I was not discussing Apple's policies, nor was I giving "forbidden" instructions. That the entire thread got pulled has to make me think that straying into those waters -- perhaps, my discussion of copyright issues in regard to the behavior of the other site under consideration, especially, made someone very nervous. Or maybe it was something other than that. But I will never know.
In any case, "You might contact your administrator if you think...." is genuinely silly, and unless it's somehow ineradicable from the Jive template -- I see now Meg has given that as a possible reason -- I can't see why it shouldn't be removed.
Message was edited by: WZZZ -
"Access Denied. Contact your administrator"
Hello,
We are a small company using WindowsServer2008R2 Enterprise software for our file server. Users are using Microsoft Office 2010 on Windows 7 Professional. All users have similar permissions.
When I open a file from file server on my computer, and edit -> save -> close it, after that neither me nor other users are able to open the file. We all get error "Access Denied. Contact your administrator".
Note that if OTHER users do the same (i.e. open a file from file server on my computer, and edit -> save -> close it), we dont get the same error. We all are easily able to open the file.
Please suggest a solution urgently.
ThanksThis issue occurs because Excel 2010 tries to delete the temporary copy of the original workbook on the UNC share.
When a user saves an Excel workbook to a UNC share location, Excel 2010 creates a temporary copy of the workbook. In the final step of the saving process, Excel 2010 deletes the original Excel workbook and replaces it with a temporary copy. If Delete permissions
are not granted to the user, Excel 2010 cannot complete the saving process, and the user receives the error message that is mentioned in the "Symptoms" section.
To resolve this issue, apply the following update:
http://support.microsoft.com/kb/2553034
Source link: http://support.microsoft.com/kb/2589410
More information about troubleshooting errors when you save Excel files, please visit here:
https://support.microsoft.com/kb/271513
Tony Chen
TechNet Community Support -
Hi everyone,
I had a little trouble finding this on ony forums, so i decided to write it myself.
I have setup on my Windows server 2008 machine fax server manager. It is working well (recieving faxes and forwarding it through email)
It has been setup with a d-link external fax modem.
Everytime i try to connect my client computer (windows vista business 32 bit) to the fax server through windows keep getting " you do not have security permissions to complete this operation. Contact your administrator for more information."
I am having a little trouble getting around it as i am the system administrator and have all the rights to do this. I have also added extra to my account fax rights as i thorght, that could of been the problem. I have also added my account in the fax server manager, but that did not work as well.
Everything is set up on a domain and the server that is running fax service manager is on it aswell, not sure what could be the problem.
Thank you in advanced for your helpHi,
Thanks for the post.
First, I would like to confirm if the issue occurs with the Domain Admins.
If so, please check if the relevant group policies are set appropriate.
To resolve this issue, make sure that the Network Service account and the Local Service account is added to the following policy settings on the domain controller:
· Adjust memory quotas for a process
· Generate security audits
· Log on as a service
· Replace a process level token
· Log on as a batch job
To configure the policy settings for the Network Service account on the domain controller, follow these steps:
1. Click Start, point to Administrative Tools, and then click Local Security Policy.
2. Expand Local Policies, and then click User Rights Assignment.
The policy settings are displayed in the right pane.
3. Double-click the policy setting that you want to add the Network Service account to.
4. If the Network Service account and the Local service account is not in the list of users and groups that are assigned to that policy setting, click Add User or Group.
5. In the Select User or Groups dialog box, type Network Service in the Enter the object names to select box, and then click OK.
6. Verify that NETWORK SERVICE is displayed in the list of users and groups that are assigned to that policy setting, and then click OK.
7. Add Local service the same way.
8. Reboot the server.
Does it work?
If the problem continues, Please collect the MPSReport from Windows Server 2008.
1. Download proper MPS Report tool from the website below.
Microsoft Product Support Reports
http://www.microsoft.com/downloads/details.aspx?FamilyID=CEBF3C7C-7CA5-408F-88B7-F9C79B7306C0&displaylang=en
2. Double-click to run it, if requirement is not met, please follow the wizard to download and install them. After that, click Next, when the "Select the diagnostics you want to run" page appears, select "General", “Business Networks”, click Next.
3. After collecting all log files, choose "Save the results", choose a folder to save <Computername>MPSReports.cab file.
Use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the file and then give me the download address.
Hope this helps. -
Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support -
I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- EvenstarlineHi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account. I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well. I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline -
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
My Inspector for my house sent me his report via PDF that I had to access from an online link. I downloaded it but cannot forward it in an email to my insurance company who is requiring a copy. I get this error report every time:
Server Connection Error. Please verify that port 143 is available for connection on your machine or contact your administrator.
I have no idea what this means. Can someone help? I really don't want to have to print and scan this beast but I've been messing with this for 2 days now and am out of ideas.
Thanks!I'm having the same issue. Did you resolve it?
-
After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Maybe you are looking for
-
I'm using windows 7 with PSE9. Where is the menu bar??
This is a brand new computer HP-400 , 23" screen. Also brand new individual license of PSE9, My PSE 7 worked great on my XP. How do I get the menu bar to show? Alsom the 'Export' option in the editor is grayed out. How do I export as new file????
-
Why pacman do not prompt I have installed that package???
I found that pacman do not prompt installed packages. It leads to reinstalling packages. It's a bad situation...
-
Network Load Balancing and failover for AFP Sharing
Dear all, Somebody kindly teach me to use round robin DNS to perform the network load balancing, it's success but not the failover. I have 4 xserve and want to do the load balancing and failover at the same time. I have read the IP failover document
-
Removing unresolved SIDs from AD Group populated with cross-forest members
Hi there, Looking for a way in PowerShell to remove a specific unresolved SID from a group. Having an issue where a group is populated with accounts from a domain in another forrest. When the accounts are deleted the SID remains in the group unresolv
-
How to get the iView Property value in NWDS
Hi all, I my requirement I need to get some of the iView Property Value in NWDS. Can anybody help me for this? Helpful answers will appreciate. Thanks & regards, Kathiresan R