Failed to read data from report file, failed to read parameter object

Error message when doing a u201CSchedule List of Valuesu201D
failed to read data from report file,
c:\docume~1\user........
failed to read parameter object
Earlier in the day it worked just fine nothing had been changed.
I have admin right on the windows server and in central management console
Can someone please help with this issue.

Hi Glenn
Please let us know the following:
1.What is the exact version of Crystal Reports Designer?
2.What is the version of Business objects Enterprise installed on the machine?
3.Are reports based on Business views,Deski,Webi?
4.Are the reports migrated from older version of Crystal Reports to new Version?
Thanks
Shraddha

Similar Messages

  • Failed to read data from report file Reason: The table could not be found.

    BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
    Failed to read data from report file Reason: The table could not be found.
    Any ideas to get around this would really help out.
    Regards

    Connection used Views, ODBC System DSN is setup properly.
    Approach for import from business view manager and import wizard.  both methods failed to import the Business View and underlying reports.
    I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
    Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
    So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
    Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
    I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
    However when i try to publish, either from Crystal or Publish wizard i get the same error?
    As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
    Any help will be surely appreciated.

  • Failed to read data from report file : Reason: Crystal Reports: Print Engin

    Hi,
    When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
    Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
    Would please someone help me in fixing the issue.
    Thanks and Regards,

    Few quick checks to identify the cause -
    1. Are you able to run report in your R2 system?
    2. In XI3.1, check SIA running on which account.
    3. Check the acount have sufficient rights on file system and registry.
    4. What's your web server?
    Give proper rights and import again. Hopefully it will resolve.
    Edited by: Das on Dec 6, 2010 9:47 PM

  • Failed to read data from report file

    Hello ,
    When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
    *"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
    can you please help me in resolving it
    Regards,
    KumarTP

    Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
    - Ludek

  • Loading transaction data from flat file to SNP order series objects

    Hi,
    I am an BW developer and i need to provide data to my SNP team.
    Can you please let me know more about <b>loading transaction data (sales order, purchase order, etc.,) from external systems into order based SNP objects/structure</b>. there is a 3rd party tool called webconnect that gets data from external systems and can give data in flat file or in database tables what ever required format we want.
    I know we can use BAPI's, but dont know how. can you please send any <b>sample ABAP program code that calls BAPI to read flat file and write to SNP order series objects</b>.
    Please let me know ASAP, how to get data from flat file into SNP order based objects, with options and I will be very grateful.
    thanks in advance
    Rahul

    Hi,
    Please go through the following links:
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4180456
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4040057
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=3832922
    https://forums.sdn.sap.com/click.jspa?searchID=6094493&messageID=4067999
    Hope this helps...
    Regards,
    Habeeb
    Assign points if helpful..:)

  • Crystal Report: failed to read parameter object

    Hello -
    I have a report that consists of numerous static parms and one dynamic parm. I can save the report to my desktop but cannot save it to BO 3.1 CMC Personal Folder (or any folder for that matter).
    The dynamic parm does not use a LOV based on Business Views. A table associated with the same data source as the stored proc on which the Report itself is based provides two fields - a code field that is used in the Value and a name field which is used in the Description.
    The specific error is:
    "Failed to read data from report file <file name> Reason: failed to read parameter object".
    All the normal things have been checked -
    - VERIFied the database
    - Ensured 'No Printer' is checked
    - Ran the report (successfully) on the desktop (locally)
    The data source is Oracle. The report can be saved to the CMC and run without problem if the dynamic parameter is deleted from the report.
    The version of Crystal Reports is CR 2008 vers 12.04
    I've seen numerous postings regarding LOVs and Business Views, especially surrounding security issues, but I've yet to see a note about a dynamic parameter based on a table....
    Thanks

    Hi!
    Thanks for the response....
    Re: check the "Enable Repository Refresh" checkbox
    The SAVE failed with the Failed to read data from report file error.
    When I went to the Bus View mgr, I found the LOV. It was set as a cascading prompt (not what I wanted when I set the parm) and could not edit it. No permissions.
    I went back to the report and tried to edit the parm into which I had stuffed the LOV I can't touch in Bus Views, and found I can't open in the report canvas without logging into the repository.... which I did.... and went to edit the parm...can't open in the report canvas without logging into the repository.... which I did.... and went to edit the parm... You get the idea....
    What I had WANTED to do is take a table with 2 fields in it - a NAME and a CODE field, create a dynamic parm, use the CODE field as the Value and the NAME field as a description. When I brought in the LOV, it came in as a cascading LOV... I needed to have the Description as the user fronted piece... but I can't seem to get there from here.....

  • Failed to read parameter object using Dynamic Parameter

    Hi All
    In one of my report I am using dynamic parameter, I tried to publish the report in BOXI and got the following error:
    "Failed to read data from report file C:DOCUME1...LOCALS1Temp~crw{u2026u2026..-u2026.-u2026.-u2026.-u2026u2026u2026u2026}.rpt. Reason: Failed to read parameter object"
    but if I change that to static parameter I am able to publish it.
    I am using Crystal Report 2008 Version: 12.1.0.892
                                              Product Type: Full
    BO Version: Product: 12.1.0 © 2008 Business Objects
    I went thru many forums and came up with some settings while publishing but nothing worked out. And some mentioned about the service packs and fix pack issues. But I am not sure which should be installed in order to make this work for my versions.
    Can anyone please suggest, what can be done to publlish a report with dynamic parameter?
    Thanks
    Sree

    Hi Sharon,
    I am facing same kind of issue with crystal report 12.2.0.290 and BO server 12.1.0 © 2008 Business Objects.
    While i am trying publish the report with dynamic parameter, its throwing the error "Failed to read parameter object ".
    I am not sure what to do..can you please guide me ?
    Regards,
    Johnes

  • Failed to read parameter object - error in BO XI server

    Hi all,
    We have the enterprise edition of Business Objects server XI, which is available in the Solaris 10 machine. We try to upload the rpt file using the Central  Management Console Log in, at the time we got the following error.
    There was an error while retrieving data from the server: Failed to read data from report file /var/tmp/data_gen_letter.rpt63065d888163420.  Reason: Failed to read parameter object.
    Can anybodies help me on this, why this error has came.
    Thanks in advance.
    Regards,
    Vel.

    I am facing the same issue. I am using BO XI 3.1 (12.1.0) and CR 2008 (12.2.3.467)
    Initially I was getting "Failed to read parameter object"
    I found this resolution posted
    1. Log on to Business View Manager as administrator.
    2. Click View > Repository Explorer.
    3. Right-click Dynamic Cascading Prompts. Click Edit Rights.
    4. Click the appropriate user or group receiving the error. If the group is not present add them.
    5. Click the Granted option for the right to View, Edit & Set Security rights.
    6. Click OK. Close Business View Manager.
    I did the above steps. When I try to save the CR report the first time, the dynamic prompts get added to the Dynamic cascading prompt list in Buss View Mgr, but the report does not get save to BOE. I get an error
    Reason: Unable to launch c:\Program File\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportAdd program to add report to the system
    If I try to save the same report to BOE again, it gets saved with any error. SO, the first time I try only the dynamic prompts get saved, the next time the report.
    Any help on this please?

  • Failed to read parameter object error in BO server XI

    We have the enterprise edition of Business Objects server XI, which is available in the Solaris 10 machine. We try to upload the rpt file using the Central  Management Console Log in, at the time we got the following error.
    There was an error while retrieving data from the server: Failed to read data from report file /var/tmp/data_gen_letter.rpt63065d888163420.  Reason: Failed to read parameter object.
    Can anybodies help me on this, why this error has came.
    Thanks in advance.
    Regards,
    Vel.

    Hi,
    the problem has to do with the permissions on dynamic prompts. Eventually you can solve this by setting the permissions on the prompts using the Business View Manager. (CrystalBVM.exe: to be found in BOBJ client installations on windows)
    Do your report fetch data from an SAP R/3 system?
    Regards,
    Stratos

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Failed to read parameter object when publish crystal report 11

    Hi,
    I created a dynamic parameter crystal report and while running in CR (XI) everything works fine.
    Once I am trying to publish to server (infoview & business objects) I am getting error message "Failed read data from report... Reason: Failed to read parameter object"
    (It works fine and was published sucesfully if I change to static parameter.)
    I already try to change 'Edit right' in Business View Manager as other people suggest in other place and I still can't publish it without error.
    Please help.

    Re: Failed to read parameter object using Dynamic Parameter  
    Posted: Sep 27, 2010 9:23 PM    in response to: sharonamt     Edit          Reply 
    Hi Sharon,
    I am facing same kind of issue with crystal report 12.2.0.290 and BO server 12.1.0 © 2008 Business Objects.
    While i am trying publish the report with dynamic parameter, its throwing the error "Failed to read parameter object ".
    I am not sure what to do..can you please guide me ?
    Where we need to install service pack at machine which having crystal report designer or at Bo server
    Regards,
    Johnes

  • Read and write excel sheet data from uploded file in sharepoint site programmatically 2013

    hi team,
    I am working on sharepoint 2013.I want to read and write data in excel sheet (micrsoft excel) from stored file in shrepoint docoumnt library .please suggest me
    vijay

    Hi
    Vijay,
    check those links
    http://www.sharepointwithattitude.com/archives/61
    https://social.technet.microsoft.com/Forums/en-US/e760051b-a92f-473c-9ec9-0f0c36c99e40/read-and-write-excel-sheet-data-from-uploded-file-in-sharepoint-site-programmatically-2013?forum=sharepointdevelopment
    Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps.

  • How to read the data from Excel file and Store in XML file using java

    Hi All,
    I got a problem with Excel file.
    My problem is how to read the data from Excel file and Store in XML file using java excel api.
    For getting the data from Excel file what are all the steps i need to follow to get the correct result.
    Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
    Thanks & Regards,
    Sreenu,
    [email protected],
    india,

    If you want someone to do your work, please have the courtesy to provide payment.
    http://www.rentacoder.com

  • Regarding reading the data from the files without using Stremas

    hai to all of u...
    here i have a problem where i have to read the data from the files without using any streams.
    please guide me how to do this one,if possible by giving with an example
    Thanks & Regard
    M.Ramakrishna

    Simply put, you can't.
    By why do you need to?

  • Reading in data from a file

    Hi,
    I am tring to read data from a file into my Web Service program. Its a plain text file with item descriptions and price info etc. At the moment I'm trying BufferedReader in = new BufferedReader(...) but I keep getting an exception with Tomcat not being able to locate my file.
    Should there be a specific location for files such as this? Or do I need to add a path to a properties or build file? I have tried many different system locations.
    I've tried to follow the Sun coffee bean example, but I have found it very complex and would appreciate a clear simple answer.
    This is driving me crazy and any help would be much appreciated.
    //Daniel.

    public static void main(String argv[]) {
         try {
              String filename="absolute path to some file";
              BufferedReader in = new BufferedReader(
    (Reader)new FileReader(filename)
              String line;
              while ((line=in.readLine()) != null)
    System.out.println(line);
         catch (Exception e) {
              System.out.println(e.toString());

Maybe you are looking for

  • Data is not getting updated in table using RFC

    Hi Experts, In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated. Moreover , when w

  • Contact form-checkbox PHP coding doesnt work

    I am a beginner to web page design so i would be grateful if you can explain to me what PHP coding i would need for 'Checkbox' and where to place it in the PHP coding below. I can submit the form to my email with all the headings and the filled in fo

  • ITunes 10 - Mutliple Accounts no longer working on ATV

    Just when I thought upgrading to Itunes 10 was a breeze... In my house we have 3 Apple TV's. My wife and two kids each have their own iTunes accounts. We often play each others music or watch each others shows or movies and simply authorise all 4 com

  • JDBC MySQL Connector/J problems when using in applets

    I wrote a piece of code which uses the MySQL Connector/J which worked in a normal shell application but when used in an applet it just didnt print anything. The code is: import java.net.*; import java.sql.*; class DB { static Connection c; static Sta

  • I need a logic immediately

    There are four tables for me Table_A TAble_B TAble_C TAble_D Table_A ID number mn_nbr Varchar(8) Table_B ID number sec_NBR varchar(3) Table_C MN_NBR VArchar(8) SEC_NBR VArchar(3) m_mn_nbr Varchar(11) m_sec_nbr VArchar(3) Table_D m_mn_nbr VArchar(11)