Failed to read data from report file : Reason: Crystal Reports: Print Engin

Hi,
When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
Would please someone help me in fixing the issue.
Thanks and Regards,

Few quick checks to identify the cause -
1. Are you able to run report in your R2 system?
2. In XI3.1, check SIA running on which account.
3. Check the acount have sufficient rights on file system and registry.
4. What's your web server?
Give proper rights and import again. Hopefully it will resolve.
Edited by: Das on Dec 6, 2010 9:47 PM

Similar Messages

Failed to retrieve data from the database using Crystal Reports XI R2

I am using Crystal reports XI R2 and using the Universal Web Connector (connecting to Coghead). When I put some some of the fields from the database and run Preview I get "Failed to retrieve data from the database." . Where is this message coming from and how can I track down what the issue is?

Hi Jamie,
When you are trying to Browse Data of a field it is not poping up any window menas, it is unable to interact with database and get the data from database.
Try to create a new report using ODBC with Xtreem Sample Database. If you get the data in your report without any error then your connector is not working / unable to pull the data into your report.
You can find the supported platforms document in below link
http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp
Thanks,
Sastry

Failed to read data from report file Reason: The table could not be found.

BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
Regards

Connection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated.

Failed to read data from report file

Hello ,
When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
*"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
can you please help me in resolving it
Regards,
KumarTP

Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
- Ludek

Failed to read data from report file, failed to read parameter object

Error message when doing a u201CSchedule List of Valuesu201D
failed to read data from report file,
c:\docume~1\user........
failed to read parameter object
Earlier in the day it worked just fine nothing had been changed.
I have admin right on the windows server and in central management console
Can someone please help with this issue.

Hi Glenn
Please let us know the following:
1.What is the exact version of Crystal Reports Designer?
2.What is the version of Business objects Enterprise installed on the machine?
3.Are reports based on Business views,Deski,Webi?
4.Are the reports migrated from older version of Crystal Reports to new Version?
Thanks
Shraddha

How read data from *.LB File in LabVIEW?

Hi dear specialist,
How I can read data from *.LB File in LabVIEW?
Thanks` Hovo

Thanks Ben, but when I open it as datalog file` comes following error:
Error 71 occurred at Open/Create/Replace Datalog in Simple Temp Datalog Reader.vi
Error 71 occurred at Open/Create/Replace Datalog in Simple Temp Datalog Reader.vi
Possible reason(s):
LabVIEW: File datalog type conflict.
C:\Documents and Settings\Home\Desktop\a.lb
Here is an example of lb file (a.lb), and here is a VI for read datalog file(Simple Temp Datalog Reader.vi)
What means this error?
How I can read a byte at a time?
Attachments:
testForLB.zip ‏101 KB

How to read data from a file in OSB

hi guys,
Recently, I've got a problem with reading file from specific location. I've actually followed this post OSB 11g - Read or Poll File in OSB - Oracle Fusion Middleware Blog, and then
I know how to read a file. However, it does not as expected. Because, I've found no way to read data from the file. Therefore, no chance to manipulate the data like assigning to a variable, or extracting ....
Hence, is there any way to read data from file by using proxy service in OSB ??? No Java code ???
by the way, supposed that there is no way to read data from a file in OSB. So, What purposes will the way in the post above be used for?
Many thanks in advance

http://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works!

How to read data from a file that was formatted by excel?

Hi everyone, I'm familiar with java.io and the ability to read from files, can anyone tell me how to read data from a file that was formatted by excel? Or at least give me some web references so that I can learn about it?

http://jakarta.apache.org/poi/hssf/index.html
HSSF stands for Horrible Spreadsheet Format, but it still works!

Reading data from flat file Using TEXT_IO

Dear Gurus
I already posted this question but this time i need some other changes .....Sorry for that ..
I am using 10G forms and using TEXT_IO for reading data from flat file ..
My data is like this :-
0|BP-V1|20100928|01|1|2430962.89|27|2430962.89|MUR|20100928120106
9|2430962.89|000111111111|
1|61304.88|000014104113|
1|41961.73|000022096086|
1|38475.65|000023640081|
1|49749.34|000032133154|
1|35572.46|000033093377|
1|246671.01|000042148111|
Here each column is separated by | . I want to read all the columns and want to do some validation .
How can i do ?
Initially my requirement was to read only 2 or 3 columns so i did like this ...
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle utl_file.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); -- For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
v_handle := UTL_FILE.fopen (v_path, v_file, 'r');
LOOP
UTL_FILE.get_line (v_handle, v_filebuffer);
IF SUBSTR (v_filebuffer, 0, 1) = '0' THEN
SELECT line_0 INTO line_0_date
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_0 INTO line_0_Purp
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 4;
SELECT line_0 INTO line_0_count
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 7;
SELECT line_0 INTO line_0_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 8;
SELECT line_0 INTO line_0_ccy
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 9;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '9' THEN
SELECT line_9 INTO line_9_Acc_no
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_9 INTO line_9_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 2;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '1' THEN
line_1_flag := line_1_flag+1;
SELECT line_1 INTO line_1_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_1, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
Line_1_tot := Line_1_tot + line_1_sum;
END IF;
END LOOP;
DBMS_OUTPUT.put_line (Line_1_tot);
DBMS_OUTPUT.PUT_LINE (Line_1_flag);
UTL_FILE.fclose (v_handle);
END;
But now how can i do ? Shall i use like this select Statement for all the columns ?

Sorry for that ..
As per our requirement ...
I need to read the flat file and it looks like like this .
*0|BP-V1|20100928|01|1|2430962.89|9|2430962.89|MUR|20100928120106*
*9|2430962.89|000111111111|*
*1|61304.88|000014104113|*
*1|41961.73|000022096086|*
*1|38475.65|000023640081|*
*1|49749.34|000032133154|*
*1|35572.46|000033093377|*
*1|246671.01|000042148111|*
*1|120737.25|000053101979|*
*1|151898.79|000082139768|*
*1|84182.34|000082485593|*
I have to check the file :-
Validation are 1st line should start from 0 else it should raise an error and insert that error into one table .
The for 2nd line also same thing ..it should start from 9 else it should raise an error and insert that error into one table .
Then the 3rd line should start from 1 else it should raise an error and insert that error into one table .
After that i have to do a validation like i will read the 1st line 2nd column .. It should be like this BP-V1 else raise an error and insert that error to a table . Then i will check the 3rd column which is 20100928 , it should be YYYYMMDD format else same thing ERROR.
Then like this for all columns i have different validation .......
Then it will check for the 2nd line 3rd column . this is an account no .1st i will check it should be 12 char else ERROR .Then I will check that what user has imputed in the form.Like for example User putted 111111111 then i will check with this 000111111111 which is there in the 2nd line . I have to add 000 before that Account no which user imputed .
Then the lines which is starting from 1 , i have to take all the 2nd column for all the lines which is starting from 1 and i have to do a sum . After that i have to compare that sum with the value in the 1st lines ( Starting from 0) 6th column . It should be same else ERROR ...
Then same way i have to count all the lines which is starting from 1 . Then i have to compare with the 7th column of 1st line . It should be same . Here in this file it should be 9.
MY CODE IS :-
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle TEXT_IO.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
LC$String VARCHAR2(50) ;--:= 'one|two|three|four|five|six|seven' ;
LC$Token VARCHAR2(100) ;
i PLS_INTEGER := 2 ;
lfirst_char number;
lvalue Varchar2(100) ;
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
--v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
Message(lfile_name);
v_handle := TEXT_IO.fopen(lfile_name, 'r');
          BEGIN
                    LOOP
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    --Message('First Char '||lfirst_char);
                              IF lfirst_char = '0' Then
                              Loop
                              LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                              Message('VAL - '||LC$Token);
                              lvalue := LC$Token;
                              EXIT WHEN LC$Token IS NULL ;
i := i + 1 ;
End Loop;
                              Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (9999,'0002','First line should always start with 0');
                                   Forms_DDL('Commit');
                                   raise form_Trigger_failure;
                              End if ;
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                    --Message('Row '||LC$Token);
                         IF lfirst_char = '9' Then
                              Null;
                         Else
                              Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (8888,'0016','Second line should start with 9');
                              Forms_DDL('Commit');
                              raise form_Trigger_failure;
                         End IF;
                    LOOP
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                    --Message('Row '||LC$Token);
                              IF lfirst_char = '1' Then
                              Null;
                              Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (7777,'0022','The third line onward should start with 1');
                                   Forms_DDL('Commit');
                                   raise form_Trigger_failure;
                              End if;
                    END LOOP;
                    --END IF;
                    END LOOP;
          EXCEPTION
               When No_Data_Found Then
          TEXT_IO.fclose (v_handle);
          END;
Exception
     When Others Then
     Message('Other error');
END;
I am calling the FUNCTION which you gave SPLIT as mcb_simulator_pkg.Split.

Reading data From XML file and setting into ViewObject to Pouplate ADF UI

Hi,
I have following requirement.
I would like to read data from XML file and populate the data in ViewObject so that the data can be displayed in the ADF UI.
Also when user modifies the data in the ADF UI, it should be modified back into to ViewObject.
Here is an example - XML file contains Book Title and Author. I would like to read Book Title and Author from XML file and set it into ViewObject Attribute and then display Book title and Author in ADF UI page. Also when user modifies Book title and Author, I would like to store it back in View Object.
Please help me with this requirement and let me know if any solution exist in ADF, for populating the ADF UI screen fields with external XML file data.
Thanks

Read chapter 42 http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/bcadvvo.htm of the fusion developer guide
Section 42.7, "Reading and Writing XML"
Section 42.8, "Using Programmatic View Objects for Alternative Data Sources"
Timo

Read data from Excel file and diaplay in Webdynpro

Hi all,
I need some help. I have a Excel file with set of name, phonenumbers . I want to know how to display the data using Webdynpro. Could some one help me. help is appreciated and I promise to award points for right answer.
Thank you
Maruti

<b>Hi
i can explain you to read data from Excel file
First You have to download the jxl.jar file. You can get this file from the Below site
</b><a href="http://www.andykhan.com/jexcelapi/download.html">jexcelapi jar</a>
It will be in Compressed Fromat So Unzip it to get the Contents
After Unzipping The File You will get a Folder (jexcelapi/jxl.jar)
Now in NWDS open web dynpro explorer, Right Click Your Project, a popup menu will appear and in that click Properties
You will get window displaying your Project Properties
On Left Side of the window You Will Find "Java Build Path"
Click That "Java Build Path" and you will get 4 Tabs Showing ( Source,Projects,Libraries,Order and Export)
Click Libraries Tab
You will find options many options buttons
In that click the Button "Add External Jars"
You will get Window in order to fecth the jxl.jar file from the location you had stored
After selecting the jxl.jar i will get displayed and click ok
Now Open Navigator
Open Your Project
You will find Lib folder
Copy the jxl.jar to that lib folder
Note : You cannot Read the Content from the excel file directly
First You Have to copy that file to the Server,
And from the Server you can get the file absolute path
With the absolute path you can read the contents of the Excel file
You have to save the Excel file as .xls Format and Not as xlsx format i will not accept that...
You have Upload the Excel file from the Server Using the File Upload UI Element
This Coding will extract 3 columns from the Xls File
Coding
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import jxl.Cell;
import jxl.Sheet;
import jxl.Workbook;
import com.sap.fileupload.wdp.IPrivateFileUpload_View;
import com.sap.tc.webdynpro.services.sal.datatransport.api.IWDResource;
public void onActionUpload_File(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_File(ServerEvent)
    IPrivateFileUpload_View.IContextElement element1 = wdContext.currentContextElement();
    IWDResource resource = element1.getFileResource();
    element1.setFileName(resource.getResourceName());
    element1.setFileExtension(resource.getResourceType().getFileExtension());
    //@@end
public void onActionUpload_File_in_Server(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_File_in_Server(ServerEvent)
    InputStream text=null;
    int temp=0;
    try
         File file = new File(wdContext.currentContextElement().getFileResource().getResourceName().toString());
         FileOutputStream op = new FileOutputStream(file);
         if(wdContext.currentContextElement().getFileResource()!=null)
              text=wdContext.currentContextElement().getFileResource().read(false);
              while((temp=text.read())!=-1)
                   op.write(temp);
         op.flush();
         op.close();
         path = file.getAbsolutePath();
         wdComponentAPI.getMessageManager().reportSuccess(path);
    catch(Exception e)
         e.printStackTrace();
    //@@end
public void onActionUpload_Data_into_Table(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionUpload_Data_into_Table(ServerEvent)
    try
          Workbook wb =Workbook.getWorkbook(new File(path));
          Sheet sh = wb.getSheet(0);
          //wdComponentAPI.getMessageManager().reportSuccess("Columns = "+sh.getColumns());
          //wdComponentAPI.getMessageManager().reportSuccess("Rows = "+sh.getRows());
          int columns = sh.getColumns();
          int rows = sh.getRows();
          int i=0;
         for(int j=1;j<=rows;j++)
                   ele=wdContext.nodeTable_Data().createTable_DataElement();
                   Cell c1 = sh.getCell(i,j);
                  ele.setTab_Name(c1.getContents());
                   Cell c2 = sh.getCell(i+1,j);
                   ele.setTab_Degree(c2.getContents());
                      Cell c3 = sh.getCell(i+2,j);
                   ele.setTab_Percentage(c3.getContents());
                   wdContext.nodeTable_Data().addElement(ele);
    catch(Exception ex)
         wdComponentAPI.getMessageManager().reportSuccess(ex.toString());
    //@@end
   * The following code section can be used for any Java code that is
   * not to be visible to other controllers/views or that contains constructs
   * currently not supported directly by Web Dynpro (such as inner classes or
   * member variables etc.). </p>
   * Note: The content of this section is in no way managed/controlled
   * by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String path;
IPrivateFileUpload_View.ITable_DataElement ele;
//@@end
Regards
Chandran S

To read data from exel file into sap

hi all,
How to read data from exel file into the internal table in abap?
Regards,
sugeet.

Hi Sugeet,
Use the following code.
DATA : BEGIN OF tbl_asset occurs 0,
         anlkl LIKE anla-anlkl,          " Asset Class
         bukrs LIKE anla-bukrs,          " Company Code
         ranl1 LIKE ra02s-ranl1,         " Asset #
         txt50 LIKE anla-txt50,          " Description 1
         txa50 LIKE anla-txa50,          " Description 2
         sernr LIKE anla-sernr,          " Serial #
         invnr LIKE anla-invnr,          " Inventory #
         menge LIKE anla-menge,          " Quantity
         meins LIKE anla-meins,          " Base UOM
         inken LIKE anla-inken,          " Inventory
END OF tbl_asset.
DATA : w_filename TYPE IBIPPARMS-path,
       w_file     TYPE string.
start-of-selection.
*popup for file path from user
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   PROGRAM_NAME        = SYST-CPROG
   DYNPRO_NUMBER       = SYST-DYNNR
IMPORTING
   FILE_NAME           = w_filename          .
MOVE w_filename TO w_file .
* upload data
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = w_file
    FILETYPE                      = 'ASC'
    HAS_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                      = tbl_asset
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
for HAS_FIELD_SEPARATOR Use
'X': Fields are separated by tabs.
SPACE: Fields are not separated by tabs. In this case, the table must contain only one column or all columns must be contained in the file in their entire length.
Hope it helps...
Lokesh
Pls. reward appropriate points

Reading data from flat file in aplication server

hi all,
can any body provide code how to read data from flat file which is in application server.
thanks in advance

hi,
chk this sample code.
parameters: p_file like rlgrap-filename obligatory
default '/usr/sap/upload.xls'.
types: begin of t_data,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
matnr like vbap-matnr,
werks like vbap-werks,
megne like vbap-zmeng,
end of t_data.
data: it_data type standard table of t_data,
wa_data type t_data.
open dataset p_file for output in text mode encoding default.
if sy-subrc ne 0.
write:/ 'Unable to open file:', p_file.
else.
do.
read dataset p_file into wa_data.
if sy-subrc ne 0.
exit.
else.
append wa_data to it_data.
endif.
enddo.
close dataset p_file.
endif.
Rgds
Anver

Dynamic Internal Table for reading data from external file

Hello All,
The task was to create a internal table with dynamic columns,
Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
can any one help me in getting my task completed..
Thanks
Kumar

Hi,
I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
Regards

Failed to read data from Lock tables

Hi,
When i trying to update data using T_CODE j1i8. I am getting message (Failed to read data from Lock tables ) but where as my database tables are not been locked. can anyone plz help me out.
Regards,
Anaveer

Hi
Probably some other transation is modifying the Database table you are using & it may have locke the table using FOR UPDATE stmt.
Using Deque_all FM module you can remove the locks
Thanks
Sandeep
Reward if helpful

Failed to read data from report file : Reason: Crystal Reports: Print Engin

Similar Messages

Maybe you are looking for