"failed to respond/connect" fix

I have a Dual G4 Mirror Drive Door running Tiger. After upgrading to Tiger, iChat AV wasn't working, like I've seen in many other posts. After culling this discussion board for a setup like mine: iChat via tower connected to Airport Extreme base station via ethernet & base station connected via ethernet to adsl (wirespeed) modem, I didn't find any other posts that addressed my fairy simple setup.
After glancing over Ralph John's excellent postings over at his site, I noticed the one thing I hadn't seen in the postings here: a discussion of the base station itself.
So, for snicks, I checked to see if my base station software was up-to-date. It was not.
I uploaded the latest upgrade to it, and presto, iChat AV works like a champ.
f.y.i. I have no router, other than the airport base station.
I hope this helps.

Hi Thomas,
Welcome to the Apple Discussion Pages
Thanks for that reminder.
Ralph

Similar Messages

A connection attempt failed because the connected party did not properly respond after a period of time

Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
South Central and East regions:
"A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
On Azure, the same web service call can result in this error or will return a response successfully.
There doesn't appear to be any pattern as to why the same call would work one time but not another.
How can this be resolved again? Any feedback is appreciated. Thanks.

Hi,
Please have a look at this article:
http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
it gives us several ways to solve this issue, hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

(Target failed to respond in time for a logout request) - - - Two Node's Iscsi initiator is not able to connect simultaneoulsy

Environment
OS = Windows 2003R2
Iscsi initiator = 2.0.8
Microsoft Iscsi Target = 3.3
Error in event viewer = Target failed to respond in time for a logout request.
Source iScsiPrt, Event ID 44
Problem
I have two systems with Win2003 R2 installed with Iscsi initiator 2.0.8. One Iscsi initiator is connected with the target but when I connect the second system, the system is not able to connect and giving me login error mentioned above. I disconnect the
connected system(The system which is connected with windows target) and connect the system which is failing to connect with the windows target, this time the failing system able to connect with windows target.
My workaround
The system which is connected with the windows target, I restarted it. While restarting the system, I connect the other system which then connected successfully. Now this time when both systems are up and running both system's iscsi initiator is connected
with Windows target.
Any comment will be appreciated. Thanks. Zahid Haseeb.

Hi Zahid,
Have you tried the suggestion above?
Please feel free to let us know if the issue persists.
Best Regards,
Amy Wang

My IPhone is giving me a message " connection to the server failed" how di I fix that?Ask your question.

My IPhone is giving me a message "connection to the server failed" how do I fix this problem?

Hi there klwalsh1,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
-Griff W.

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, then when I unlock the phone it automatically redials the failed call,

When my iPhone 4S (with ios7) experiences a failed call while connected to my Bluetooth hands free in my car(screen locked) the failed call appears on the locked screen, as it should, the problem arises whenever I unlock the phone, it automatically redials the last failed call, it doesn't do this with missed calls that are on the locked screen, if any. It is really annoying as sometimes the phone doesn't respond to attempts to end the call before it connects to the number. I then have to explain that it was my phone and not me, I look like an idiot, which I don't really need any extra help with!! Does anyone have any ideas? I don't want to stop missed call from showing in the locked screen but it might be associated with the failed calls and therefore be the only resolution

I have had the same issue which was driving me mad but think I have just found a way around it. In iOS 7 if you swipe up on the lock screen to access quick settings and go into timer then click the home button you get into the phone without calling the person back. Not a great 'fix' but hope it works for you. Come on Apple this isn't good enough, fix this bug otherwise you will lose your customers.

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

IChat v Skype - 'fail to respond' etc

I have been using Skype on my Mac for a long time, and recently decided to try out iChat AV with friends living overseas. They have Macs too.
I find iChat has superior audio capabilities but it has serious problems with such issues as 'user failed to respond' or 'insufficient bandwidth'. These are problems that occur like 70% of the time and I know it is not a matter of router settings as I could sometimes get iChat to work just great. I have checked out all the postings in this forum regarding these issues and tried all the fixes but still get these problems. They do not happen all the time. Only sometimes! By the way, I am using ADSL 1500 Mbs as are my friends and I know speed/bandwidth are more than sufficient.
So, now its back to good old Skype (never had connection problems from day one). Even Gizmo is good too. Apple seriously needs to work on these issues real quick. They need to learn from Skype.

Help for iChat AV 3 Problems

AV failure... "Failed to respond" error

Been suffering from this "failed to respond" error for attempted video connections for some time now. Never quite got a solution for it. I have a PB 12" and iMac mini routed at home through a Netgear WPN824 unit, and now adding a MacBook. We could AV chat at home b/n the Macs (no big deal) but just can't get a connection outside with my in-laws. We used to be able to do this successfully under an earlier version of 10.4.x, but this "failed to respond" error has plagued us for the last few 10.4.x OS versions.
I am just wondering if the Netgear router is an issue? Would a Linksys unit be the solution? Can anyone with a similar experience report whether the issue is somehow related to Netgear's implementation?
Thanks.

Hi Ralph,
Thanks for your comment.
Somehow I'm very curious about this "did not respond" problem.
Especially since it is a problem that occurs not concistently.
It seems that it works now and then (ichat av), and very often it works
stable for quite sometime. Then suddenly the "did not respond" issue is back again and nothing can be done to fix it. When you try later (without changing any settings) it is working like it should again. So I would call it non-repeatable.
The problems started when osx updated to 10.4. I know it is not an elegant solution but the effort is minimum and the previous os is stable under any circumstance. Any idea when Apple has a fix for this, it is an Apple software problem. Can imagine it would save guys like you lot's of time and brainpain.
Regards,
JPM
Hi Jan,
Welcome To The Apple Discussion Pages.
That is one solution. Normally it is for devices
like the Zyxels that for some reason does not like
iChat on port 5190 or for modems that Port Forward
AND specify Protocols leading to conflicts when port
5190 needs TCP and UDP.
As the original poster is connecting what looks like
three computers to the 'Net now he would be better
served by Port Triggering or UPnP.
As it is a Netgear it may need UpnP turned Off and On
twice before it works properly (Netgear quirk). If
he is using Port Triggering we will need to check the
setigs he has.
Defcom has Netgear DG834 variant that works. I have
a Linksys (Router) that works.
5:13 PM Saturday; June 3, 2006
MacBookPro 17", G5 quad, G3. Mac OS X (10.4.6) G5 Quad, G4 powerbook, G3 powerbook

Unable to chat "because user failed to respond"

I and my family are having trouble using iChat AV for video chat. The problem also affects audio chat.
Essentially, when person A invites person B to chat, and person B accepts, there is a delay with the spinning indicator (which always pauses momentairly in this process) and then person B sees an error message saying that person A "failed to respond". Messaging works fine.
My father experienced this issue first, unable to connect to my brother. However, I was able to connect to both of them. Recently, I was invited to download an iSight Updater, and since this the problem now affects me.
My father uses iChat AV v3.1.6 (v441) on OS 10.4.8 on a G5 iMac
I use iChat AV 2.1 (v153) on OS 10.3.9 on a G4 iMac
I believe my brother also uses OS 10.3.x
Can anyone provide any assistance as this problem is getting us down! Thanks!
iMac G4 Flat Mac OS X (10.3.9)

Hi Perseverance,
This info suggests that ports for iChat are not open somewhere such as the Mac Firewall or the modem.
4:24 PM Wednesday; January 24, 2007

Ix2 fails to respond, cannot get past login screen

I am having intermittent problems with my Iomega ix2 failing to respond. After some time being on the drive fails to respond. I cannot open any files through Windows explorer. If i attempt to connect using the web interface i cant get past the login screen. I put in my user name and password and hit enter. The page simply reloads the login screen. The only solution is to power the drive down using the button on the back of the unit. Powering it up it works fine. Eventually though this will happen again. It's happened a half dozen time or more in the last few days. Now I'm stuck out in the field and cannot access any files. Please help.

No. No errors in the event log of any kind other than the time sync error. I recently replaced one of the disks as it had failed. I receieved a warranty disk from Lenovo/Iomega about a month ago. i installed it and it rebuilt the RAID with no problems. This error has been happening since then. When the time sync error happens i get all kinds of strange behavior. SFTP, which is how I access the files, will start giving Goodsync 'cannt reach end of file error' type errors. Like I've mentioned before I also get an issue where the web login screen gets caught in a loop too. I type in the user name and the password, hit enter, and it just reloads the login screen again. Rebooting the device from the power button on the back is the only solution.

Help - failed to respond - ichat os 10.4.7

i just bought 3 new macbooks. 1 for my fiance, 1 for myself, and 1 for my inlaws as i am moving out of state in two weeks.
i have an OLD g4 cube and an old ibook with an external, firewire isight camera. when i use both the ibook (wireless) and the cube (direct ethernet connection to my comcast cable modem) i am able to ichat with my sister who is in nyc.
when i first bought the 1st macbook i brought it home and successfully connected with my sister, in her apartment, and video-conferenced.
i then bought the 2 macbooks, set them up at my fiances house. 1 was hard-wired to their ethernet connection, the other was working wirelessly. we were able to connect and ichat in their house.
my fiance brought her computer to my house last night, we upgraded her and my OS to OS 10.4.7.
she went home, we connected via our wireless chats ONE time ... then when we tried later - we each got the "failed to respond b.c XXXX did not reply" (each got it on our own computer for our own names)
i was able to connect my macbook to my ethernet and ichat with the computer that was hard-wired at her house, but once i removed my hard-wire connection at my house, i lost the connection immediately
i then took out my isight and cube and connected to my parents computer again, i also used my ibook laptop and connected with the isight again ... when i tried to use the new macbook - failed to respond again and again and again
please - i'm so frustrated - can anyone help after that verbose explaination of my problem
macbook Mac OS X (10.4.6) now on max os x (10.4.7)

Hi bginz,
Welcome to the Apple Discussions
Ok it is a bit like this.
iChat reads the Connection speed via a setting in System Preferences for Quicktime.
WHen a computer is started up for the first time the full Bandwidth is passed to iChat
In subsquent iChat/computer start ups the Quicktime setting is used.
If this is set to Automatic it returns a 0 to iChat and caps the Bandwidth.
Go to System Preferences > QUicktime > Streaming tab and set the drop down to match your download speed.
If your connection is fatser than 1.5meg then use the 1.5meg setting.
Some of your problem may be related to the routing set up you have on your LAN.
Hw are you set up with regard to IP issuing from your modem ?
Is it using DHCP or have you set up Static routing ?
IS there any other routing device involved ?
This will lead to how have you opened the ports to allow different computers to use the iChat ports ?
Can you confirm that the initial connections are form the AIM Buddy List and not the Bonjour one ?
2:11 PM Thursday; June 29, 2006

Essbase Error(1021001) Failed to Establish Connection With SQL Database...?

Hi there!
I am very new in Essbase and I am receiving the error message quoted below while trying to load data in a Cube. Weird thing is that we have checked all connections already and they are working correctly, however this process is still failing.
If someone can give us an idea to troubleshoot it, that would be really appreciated.
Thanks very much in advance for any help and regards!
MAXL> deploy data from model 'Production_GL_Cube_SchemaModel' in cube schema '\Production_GL\Cube_Schemas\Production_GL_Cube_Schema' login AdminUserAccount identified by MyPassword on host 'ServerName.MyCompany.com' to application 'ORA_HFM' database 'GL' overwrite values using connection 'ServerName' keep all errors on error ignore dataload write 'E:\Logs\DataLoad_Error_2013.04.19.16.23.00.txt';
BPM Connect Status: Success
Failed to deploy Essbase cube. Caused by: Failed to load data into database: GL. Caused by: Cannot get async process
state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
BPM maxl deployment ...failure.

Hi Celvin,
Thanks for your reply and my apologies for not coming back before on this issue.
For the benefit of other readers, after hours struggling with the issue, we focused our attention in the following portion of the ORA_HFM.log file:
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/54996/Info(1013157)
Received Command [Import] from user [Service_Acct@Native Directory] using [GL.rul] with data file [SQL]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021041)
Connection String is [DRIVER={DataDirect 6.1 Oracle Wire Protocol};Host=MyEssbaseServer01.MyCompany.com;Port=1521;SID=PRODUCTION;UID=...;PWD=...;ArraySize=1000000;]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021006)
SELECT Statement [SELECT cp_127."ACCT" AS "Accounts_CHILD",
         cp_127."PERIOD_MEMBER" AS "Period_CHILD",
         cp_127."PERIOD_YEAR" AS "Years_CHILD",
         'INPUT' AS "View_CHILD",
         cp_127."ENTITY" AS "Entity_CHILD",
         cp_127."PRODUCT_LINE" AS "Custom1_Product_CHILD",
         cp_127."Function" AS "Custom4_Function_CHILD",
         cp_127."B_U" AS "Business_Unit_ORACLEBUSINESS",
         cp_127."ORACLEFUNCTION" AS "Oracle_Function_CHILD",
         cp_127."LEGALENTITY" AS "Oracle_Entity_CHILD",
         'P' || cp_127."PRODUCTLINE" AS "Oracle_Product_CHILD",
         'A'[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021043)
Connection has been established
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021044)
Starting to execute query
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021013)
ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-04063: view "REP_ESSBASE.VW_GL_BALANCES" has errors]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Info(1021014)
ODBC Layer Error: Native Error code [4063]
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Sat Apr 20 11:48:34 2013]Local/ORA_HFM/GL/Service_Acct@Native Directory/8964/Error(1003050)
Data Load Transaction Aborted With Error [1021001]
Then we concentrated in the following error message: *ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC Oracle Wire Protocol driver][Oracle]ORA-04063: view "REP_ESSBASE.VW_GL_BALANCES" has errors]*
So, we checked the database and noticed the schema and their views were damaged and -due to this- they lost all their properties (like data types, for example). So, we had to recompile all of them in order to avoid any loss of data. This was done in TOAD, as per the following info: https://support.quest.com/SolutionDetail.aspx?id=SOL66821
Finally, once all the views on this schema were rebuilt and fixed, we were able to deploy the Cube again.
Hope this help in the future. Cheers!!

Essbase Studio - Failed to Establish Connection With SQL Database Server

Hi all,
I am new to Hyperion and am having trouble deploying what seems a simple cube in Essbase Studio.
My environment is Windows 2003, EPM 11.1.1.2, SQL Server 2000.
I have the following two issues which may be related.
1. The EPM System Diagnostic tool says that Hyperion Foundation cannot connect to the SQL database.
Error:
Failed: Connection to database
Error: java.net.UnknownHostException: <server name: <server name>
Recommended Action:
Every other EPM application is able to connect to the database. I have tried re-configuring Foundation Services and checking the config files and nothing looks wrong. I would appreciate advice on how to fix this.
2 In Essbase Studio, I was able to connect to the database where the source data is, build the minischema and create dimensions and measures. But when I run the cube deployment wizard I get the error:
Message: Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Time)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
…ODBC Layer Error: [08001] ==> [[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.]
I have checked the DSN as well as the connections set up within Studio, and they are all able to connect to the database. I am using the admin user for the Essbase server and have created a different user for the databases where the data resides and the shared services database. I tried using the same user all the way through and this didn’t help.
Can you please advise what else I can check or change to resolve this issue.
Also, can you work in EAS with cubes that are created in Studio? I tried looking at it and I got an error that the rule file couldn’t be accessed because it was created in Studio.
After the above failures, I tried creating a cube in EIS, with mixed success. I have been able to load the members and data without errors. But when I try to view the data in the cube, I am seeing field names for the measures instead of the data itself.
...Definitely more questions than answers at this stage of my learning.
Regards
Michelle

Michelle,
I don't know if you found an answer to you question after so many months but I was hoping I could be helpful.
The issue you are experience happens often when the dimension that you are getting an error on, in this case TIME, is built from a snowflake lineage and there is a bad foreign key reference. This dimension is most like high-up in your outline build process for Essbase Studio and this prevents the build from happening usually early on.
Check your logs also. They are in Hyperion > Products > logs > essbase > essbasestudio.
You can also make your logs more verbose by setting a configuration variable in the essbase studio server.properties file but that should only be used for debugging as it really saps performance.
And, yes, you can of course edit an Essbase Studio deployed cube in EAS. However, any changes you make to the cube in EAS are subject to being wiped-out upon the next Essbase Studio deployment of that Applicaion/Database combo.
If you want to provide more detail, screenshots, etc. I would be glad to help where I can.
Cheers,
Christian
http://www.artofbi.com

User failed to respond

Okay so I have tried with a bunch of different people but I can't get video chat to work I keep getting the message that I failed to respond. I was able to user one of the appletest01 accounts and connected just fine but not to any real person. I have all my ports setup per ichat help guides and had a friend do the same for his but we couldn't connect.
Anyone know something we can try to get around this problem?

Date/Time: 2006-11-22 19:48:14.783 -0800
OS Version: 10.4.8 (Build 8L2127)
Report Version: 4
iChat Connection Log:
AVChat started with ID 2439286152.
0x17ad7ae0: State change from AVChatNoState to AVChatStateWaiting.
jtking516: State change from AVChatNoState to AVChatStateInvited.
0x17ad7ae0: State change from AVChatStateWaiting to AVChatStateConnecting.
jtking516: State change from AVChatStateInvited to AVChatStateConnecting.
0x17ad7ae0: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
jtking516: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
@:0 type=4 (00000000/22)
[VCSIP_INVITEERROR]
[19]
@SIP/SIP.c:2437 type=4 (900A0015/22)
[SIPConnectIPPort failed]
Video Conference Support Report:
@:0 type=2 (00000000/2)
[VCUSE_INTERNALISIGHT]
[25]
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.33;branch=z9hG4bK284ffb0574c4d6be
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "jtking516" <sip:[email protected]>;tag=1823807539
Call-ID: 6fa48500-7aa5-11db-94a0-b8faff0413c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=jtking 0 0 IN IP4 192.168.1.33
s=jtking516
c=IN IP4 192.168.1.33
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:831972697
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:1434778404
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.33;branch=z9hG4bK284ffb0574c4d6be
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "jtking516" <sip:[email protected]>;tag=1823807539
Call-ID: 6fa48500-7aa5-11db-94a0-b8faff0413c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=jtking 0 0 IN IP4 192.168.1.33
s=jtking516
c=IN IP4 192.168.1.33
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:831972697
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:1434778404
@SIP/Transport.c:1218 type=1 (00000000/0)
[INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.33;branch=z9hG4bK284ffb0574c4d6be
Max-Forwards: 70
To: "u0" <sip:[email protected]>
From: "jtking516" <sip:[email protected]>;tag=1823807539
Call-ID: 6fa48500-7aa5-11db-94a0-b8faff0413c4@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 474
v=0
o=jtking 0 0 IN IP4 192.168.1.33
s=jtking516
c=IN IP4 192.168.1.33
b=AS:2147483647
t=0 0
a=hwi:1056:2:2160
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:831972697
m=video 16384 RTP/AVP 126 34
a=rtpmap:126 X-H264
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=rtpID:1434778404
@:0 type=2 (00000000/22)
[VCVIDEO_OUTGOINGATTEMPT]
[4]
@:0 type=2 (00000000/2)
[VCUSE_INTERNALISIGHT]
[25]
Video Conference User Report:
Binary Images Description for "iChat":
0x1000 - 0x17cfff com.apple.iChat 3.1.5 (440) /Applications/iChat.app/Contents/MacOS/iChat

Ichat user failed to respond

hi, i've been trying to video chat with people using ichat for somet ime now, every time i try to do it though, it just says "user failed to respond". i am using an AIM screen name, and so is the person i am trying to chat with. both of us are using mac book pros

Hello... I am also having the "error-8" ichat video problem.
Date/Time: 2007-10-01 17:20:31.899 -0400
OS Version: 10.4.10 (Build 8R2232)
Report Version: 4
iChat Connection Log:
AVChat started with ID 1586007614.
heavenlylr1: State change from AVChatNoState to AVChatStateWaiting.
0x154f7470: State change from AVChatNoState to AVChatStateInvited.
0x154f7470: State change from AVChatStateInvited to AVChatStateConnecting.
heavenlylr1: State change from AVChatStateWaiting to AVChatStateConnecting.
heavenlylr1: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
0x154f7470: State change from AVChatStateConnecting to AVChatStateEnded.
Chat ended with error -8
Video Conference Error Report:
Video Conference Support Report:
Video Conference User Report:
I have called my windstream provider and have shut off the firewalls to my internet and have checked for firewalls on my computer, which were all off. My boyfriend and live very far apart and bought these computers mostly for this reason. I called Apple, and they had no answers for me. I am able to video chat with another macbook in my house, but not with anyone else. PLEASE tell me you have answers
Thank you

"failed to respond/connect" fix

Similar Messages

Maybe you are looking for