"Failed to Respond" error

Ok I am sharing internet with 3 roomies on a basic Linksys router, and want to connect with my family back in Miami. They are also on a wireless router, Belkin I believe. Anyway, everytime we try it says it can't work because "I failed to respond". Not sure what this means.
I really appreciate any help, it's very annoying that I can't get this working and its a big reason why I bought my mac.
Thanks a lot.

I have experienced the same problem. I am temporarily in Qatar and trying to initiate an audio or video chat with family in GA and WI. On my end it says I failed to respond, on their end it says I cancelled. When my family in GA intiates the conference I can join, but cannot with either party in WI. Sorry I did not hekp you but hopefully we both will get some help. None of us are sharing the internet but all are on wireless nets within our residences.

Similar Messages

  • AV failure... "Failed to respond" error

    Been suffering from this "failed to respond" error for attempted video connections for some time now. Never quite got a solution for it. I have a PB 12" and iMac mini routed at home through a Netgear WPN824 unit, and now adding a MacBook. We could AV chat at home b/n the Macs (no big deal) but just can't get a connection outside with my in-laws. We used to be able to do this successfully under an earlier version of 10.4.x, but this "failed to respond" error has plagued us for the last few 10.4.x OS versions.
    I am just wondering if the Netgear router is an issue? Would a Linksys unit be the solution? Can anyone with a similar experience report whether the issue is somehow related to Netgear's implementation?
    Thanks.

    Hi Ralph,
    Thanks for your comment.
    Somehow I'm very curious about this "did not respond" problem.
    Especially since it is a problem that occurs not concistently.
    It seems that it works now and then (ichat av), and very often it works
    stable for quite sometime. Then suddenly the "did not respond" issue is back again and nothing can be done to fix it. When you try later (without changing any settings) it is working like it should again. So I would call it non-repeatable.
    The problems started when osx updated to 10.4. I know it is not an elegant solution but the effort is minimum and the previous os is stable under any circumstance. Any idea when Apple has a fix for this, it is an Apple software problem. Can imagine it would save guys like you lot's of time and brainpain.
    Regards,
    JPM
    Hi Jan,
    Welcome To The Apple Discussion Pages.
    That is one solution. Normally it is for devices
    like the Zyxels that for some reason does not like
    iChat on port 5190 or for modems that Port Forward
    AND specify Protocols leading to conflicts when port
    5190 needs TCP and UDP.
    As the original poster is connecting what looks like
    three computers to the 'Net now he would be better
    served by Port Triggering or UPnP.
    As it is a Netgear it may need UpnP turned Off and On
    twice before it works properly (Netgear quirk). If
    he is using Port Triggering we will need to check the
    setigs he has.
    Defcom has Netgear DG834 variant that works. I have
    a Linksys (Router) that works.
    5:13 PM Saturday; June 3, 2006
    MacBookPro 17", G5 quad, G3.   Mac OS X (10.4.6)   G5 Quad, G4 powerbook, G3 powerbook

  • Address list service failed to respond error on Exchange 2007 (after adding first 2013 server)

    Hi,
    We just installed an Exchange 2013 server within an Exchange 2007 environment.
    The Exchange 2013 (CU6) server will be used to setup a hybrid connection with O365, and move mailboxes to O365.
    After installing the Exchange 2013 server it isn't possible anymore to create/enable mailboxes on the Exchange 2007 server.
    We end up with an error :
    Mig1 TestAccount
    Failed
    Error:
    The Exchange server address list service failed to respond. This could be because of an address list or email address policy configuration error.
    Exchange Management Shell command attempted:
    Enable-Mailbox -Identity 'domain.be/customer/TEMP/Mig1 TestAccount' -Alias 'mig1' -Database 'Exchange2007\SG01\DB02'
    When executed via EMS we receive this error :
    The Exchange server address list service failed to respond. This could be because of an address list or email address policy configuration error

    Hi Lyncer
    This error can be caused if the default Public Folder Database not being pointed to the exchange 2007 database which you are trying to create a new mailbox.
    Also it can happen if System Attendant service is not running.
    Troubleshooting steps:
    1) Restart the System Attendant Service 
    2) Point the affected database to the default public folder
    Follow the below steps to do that 
    Open EMC
    Go to Organization Configuration > Mailbox.
    Select the mailbox database that you want to change the default public folder database.
    Right click the database and select properties
    In <Mailbox Database Name> Properties, click the Client Settings tab.
    Next to the Default public folder database box, click Browse.
    In Select Public Folder Database, select the public folder database from the list of public folder databases, and then click OK.
    Cheers!!!
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • 'User failed to respond' (error -8) - a serious issue that needs attention

    Based on the various posts here it is becoming increasingly apparent that, in most cases, this is not a user defined issue related to incorrect router settings/port configurations etc..
    There also appears to be a fairly conspicuous correlation between upgrading to Mac OS X 10.4.7/Qtime 7.1.2 and the onset of problems with iChat. It is particularly notable that many people have been using iChat successfully for some time and that it has all of a sudden ceased working despite no manipulation of parameters related to network access (other than those associated with the 10.4.7 software upgrade of course).
    In summary, it appears that that the 10.4.7 upgrade has rendered iChat inoperable (possibly through altering the nature of communication with wireless routers? I have’nt noted if anyone with hardwired connections have been experiencing these problems).
    I am not an expert in this area, so apologies if I am stating the bleedingly obvious (or, at the other end of the spectrum, if I'm completely off the mark). Nonetheless, this appears to be a serious, global issue that is affecting an increasing number of people in the same way despite having different routers, ISP's etc.. and it is something that needs addressing.
    Is there anything in the pipeline on this yet? Or is it still being handled on a case-by-case basis, which, while appreciated, has not been successful in any way thus far.
    Some sort of formal response re: what steps are being taken to correct this would certainly be appreciated by many it appears.

    I strongly agree. I have had nothing but trouble with iChat since I upgraded to 10.4.7 & QT 7.1.2 (error -8, not responding...). I can still chat to other buddies running Tiger, but no longer can chat to buddies on AIM PCs or buddies running Panther -- buddies I have been chatting to for more than a year without a single problem.
    I also tested against the automatic clients on Ralph John's great website: appleu3test01 works fine, rjinwipc doesn't.
    I have tried using the 10.4.7 combo update -- no luck. I have even tried reverting my iChat & its libraries back to 10.4.6 using Pacifist. Same problem. Alas, I am on a group wireless router that I am not allowed to administer, so I can not try any of Ralph's port opening tricks... So, short of reinstalling the entire OS, I am stuck.
    Given the large number of people who are reporting this erorr recently, clearly, the 10.4.7/QT 7.1.2 updates have broken iChat for many, many people. Apple needs to step up and:
    1) acknowledge they have broken something
    2) build a "revert to 10.4.6 installer", as they did with QT a few months ago.
    3) publish an official workaround (if the port opening works)
    4) give us a timeline for a patch ASAP
    Thanks, LachlanT for saying what needed to be said.
    P.S. I went by my local Apple store last week and noticed that all their machines are at still 10.4.6...

  • Keynote responding error

    A person I was helping has a problem of Keynote hanging and giving  "failing to respond " error on an early Intel iMac. Thought at first was that it was an older version of iWork that was the problem and updated it to iWork '09. Gave the same errors, although the opening progress bar moved further.
    Keynote opens fine by itself, but refuses to open a PPT file without hanging. The computer could open PPT files until a few Snow Leopard upgrades ago. Since then, this error always occurs. The failure is the same whether clicking on the PPT file to open or opening Keynoter first and then opening the PPT file. I even have opened the PPT file on my computer (running Lion), saved it in Keynote format, and it still would not open the file.
    The person is a senior that gets emails with these attached PPT files and used to be able to see them.
    I saw there are posts in the archive with this same problem, but there was never a solution I could find in those posts.
    Upgrading to a newer OS is not practical or perthaps possible because of the age to the iMac. I suspect it is something with the OS updates on the older machine that is causing the hang.

    The multiplexor apparently manages to open the connection to the server, but is failing to keep the connection open. Do you see any error in mux.log? Is there any other suspicious log record in server.log?

  • "Failed to respond" message on iChat

    Hello, i thought posting my problems in this board was more appropriate than iSight.
    I am unable to connect video chat with a PC user (with AIM 5.9) via iChat AV 3.0.1. I can connect to the test appleu3test01 user for video chat but not my PC friend. I continue to ge tthe "Failed to respond" error message.
    please help! i've tried to read the step by step pages on instructions but it seems i've tried to eliminate plists and reset port numbers but nothing is working.

    Hi Ives,
    If the PC user is on XP and has Service PAck 2 installed they mey need to Enable AIM thorugh the XP firewall
    http://www.ralphjohnsuk.dsl.pipex.com/page12.html See the bottom of the two yellow boxes.
    They may also need the exrta Video file and Tune their Camera and Mic to the appliction Both of these have links in the top yellow box (the "here" link and the Bold Tuning Link justs after)
    Ralph

  • "failed to respond"

    I am trying very hard to get my mac and my friends pc to talk. I am using an aim account and every time i try to chat with my friend i get the "failed to respond" error, how do i fix this? THX
    TheMacGuy12

    Hi peaceiwa,
    Welcome to the Apple Discussions
    If they have XP, AIM 5.9, have done the "Tuning" and enabled the AIM app through the XP firewall it may pay to check those things again.
    This site may help as well.
    12:22 PM Monday; June 19, 2006

  • "Failed to Respond" victims try this v.2

    A while ago I experienced a troublesome "Failed to Respond" error and found a solution/workaround - here is that thread:
    http://discussions.apple.com/message.jspa?messageID=1023629#1023629
    I recently tried to chat after a prolonged period of time and was met by my old nemesis, "Failed to Respond". After reading countless posts and changing numerous settings on my router, iBook and then my hardwired G4 I was running out of ideas.
    I only chat with my folks and they said nothing had changed on their end however for the sake of troubleshooting I had my dad bypass his router and plug directly into the cable modem - it worked like a champ!
    True, I do not know what is causing the problem on his end but the workaround is successful. So add this one to your arsenal of troubleshooting tips and it may pay off.

    Kevin,
    I have a Netgear WGR614 v6. and the following minor tweak works for me:
    1. Open the Netgear SmartWizard router manager in your browser
    2. In the Advanced menu select 'Port Forwarding/Port Triggering'
    3. Select service type by clicking on the 'Port Forwarding' button
    4. In the 'Service Name' pull down menu select: AIM
    The following should already be entered in the table: Service #1: Service Name: AIM, Start Port: 5190, End Port: 5190, Server IP Address: Your Server IP Address: e.g. 192.168.1.2
    Click on the 'Add Custom Service' button and input the following:
    5. Service #2: Service Name: ichat 1, Start Port: 5060, End Port: 5060, Server IP Address: Your Server IP Address: e.g. 192.168.1.2
    6. Service #3: Service Name: ichat 2, Start Port:16384, End Port: 16403, Server IP Address: Your Server IP Address: e.g. 192.168.1.2
    Hope this helps,
    Ed

  • Constant "some accounts failed to respond" following 10.3.1 update

    More than a year, no problems with any of my email accounts.  None.
    10.3.1 comes along, and I now get the "some accounts failed to respond" message every other day.  Sometimes it's a couple (out of eight) of my accounts that no longer work; at other times it's five or six.
    I have to go into each account, and retype and save the password, whereupon the thing functions well for another day or two before having to go through the whole dumb rigmarole again.
    Needless to say, I don't have the time, and I CERTAINLY don't have the desire, to keep retyping my passwords to get BlackBerry's basic functionality to work.
    (As an aside, I have no data plan and use the Q10 only via WiFi networks.  The accounts in question are MSN, Hotmail, Outlook, and Exchange.)
    This is another nasty update surprise BlackBerry sprung on me recently, the debacle with the nonsense B.B.M. stickers having been the previous one.
    I am really losing my patience with BlackBerry.
    Solved!
    Go to Solution.

    Have had numerous issues with 10.3.1 update myself (got most of them resolved except for my Contacts that refuse to sync correctly).
    Regarding your specific issue with the "failed to respond" errors, I too had this issue. To resolve it, I completely deleted my accounts from the phone, rebotted, then re-added the accounts one at a time. Seemed to work for me (it's been two weeks now)..

  • Disk Utility: Burn error: 0x80020022 The device failed to respond...

    I've been working on archiving a ton of video to DVD. I'm using Dual-Layer discs to minimize the amount of physical storage space needed for the finished project. I burned several discs in iDVD in July and regularly received errors. Then the drive suddenly stopped loading any type of media. Anything I inserted would spin briefly and then eject. Repaired permissions and followed steps outlined here and here. Took the Mac back to the store where I bought it (sadly, not an Apple Store - nearest one is 12 hrs away) where naturally it performed flawlessly for the store rep.
    So I took it home and resumed burning, now saving as a disc image (ignoring iDVD's warning about the performance of DVDs burned this way) and using Disk Utility, since iDVD didn't seem to be reliable. Burned about 25 discs, error-free, in this fashion, then three days ago, got the error: "Unable to burn “Disc 19.img”. (The device failed to respond properly, unable to recover or retry.)"
    Retried the same image, and it worked. Then burned two more in the same fashion with no errors. Today I got the same error again. Logs are identical for each failed burn, except for the time span between certain lines.
    Price of DL media being what it is, I'd hate to keep ruining discs if there's something I can do to avoid it. I suppose it could be bad media, but it seems odd that I'd get two bum discs that close together after burning so many without issue. Checked the site and the forums, and there doesn't seem to be any answers. Does anyone have any ideas? (Other than "try a different brand of media." I've got a buttload of these discs and it's too late to return them now.) Even if it just helps determine where the issue lies. Warranty will be up soon, so if it's hardware related, I need to get it taken care of quick.
    Media: Philips DVD+R DL 8x
    *Drive info:*
    HL-DT-ST DVDRW GS21N:
    Firmware Revision: SA15
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: Insert media and refresh to show available burn speeds
    DiscUtility.log:
    2009-10-03 08:54:01 -0600: Burning Image “Disc 22.img”
    2009-10-03 08:55:15 -0600: Image name: “Disc 22.img”
    2009-10-03 08:55:15 -0600: Burn disc in: “HL-DT-ST DVDRW GS21N”
    2009-10-03 08:55:15 -0600: Erase disc before burning: No
    2009-10-03 08:55:15 -0600: Leave disc appendable: No
    2009-10-03 08:55:15 -0600: Verify burned data after burning: Yes
    2009-10-03 08:55:15 -0600: Eject disc after burning
    2009-10-03 08:55:15 -0600:
    2009-10-03 08:55:15 -0600: Preparing data for burn
    2009-10-03 08:56:30 -0600: Opening session
    2009-10-03 08:56:35 -0600: Opening track
    2009-10-03 08:56:35 -0600: Writing track
    2009-10-03 09:01:37 -0600: Finishing burn
    2009-10-03 09:02:37 -0600: Closing session
    2009-10-03 09:02:38 -0600: Finishing burn
    2009-10-03 09:38:37 -0600: Burn failed
    2009-10-03 09:38:37 -0600: The device failed to respond properly, unable to recover or retry.
    2009-10-03 09:38:37 -0600: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
    2009-10-03 09:38:37 -0600: Unable to burn “Disc 22.img”. (The device failed to respond properly, unable to recover or retry.)
    DiscRecording.log:
    Disk Utility: Burn started, Sat Oct 3 08:55:15 2009
    Disk Utility: Burning to DVD+R DL (CMC MAG D03) media with DAO strategy in HL-DT-ST DVDRW GS21N SA15 via ATAPI.
    Disk Utility: Requested burn speed was 47x, actual burn speed is 4x.
    Disk Utility: Burn failed, Sat Oct 3 09:37:15 2009
    Disk Utility: Burn sense: 4/44/90 Hardware Error,
    Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
    Message was edited by: Weasel42

    I have encountered the same problem. I have a Mac Book Pro from 2007, and it has gone through 3 DVD writers so far, all of which have ruined DVD+R DL disks. I have occasionally been able to burn one, but usually during verify, I get this error message:
    Communication to the disk drive failed: 0x8002022
    And disk utility fails with a "Invalid B-tree node size" error
    Oddly, when I try to burn a disk near capacity (6.5Gb or more) it is more likely to fail than if I burn a smaller disk.
    I've been using Memorex DVD+R DL disks, but I have used other brands in the past but they have failed, too. Out of about 50 disks so far, I have had success with about 5.

  • ITunes failed to respond on my PC and gave me an error message to say a component - MSVCR80.dll - was missing.  Never happened before and I have hundreds of tunes, playlists, Podcasts etc. in there somewhere.  What is this about?  Brian Forster

    iTunes failed to respond on my PC and gave me an error message to say a component - MSVCR80.dll - was missing.  Never happened before and I have hundreds of tunes, playlists, Podcasts etc. in there somewhere.  What is this about?  Brian Forster

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • "device failed to respond properly" error

    I have a mac mini sans dvd burner. Thus, I was happy to get a Plextor PX-740UF dvd burner in the mail. The fun stopped once I tried to burn a dvd. I have gone through 10 dvd's so far with no luck. I have been reading this forum trying to find a solution. I have tried Verbatim DVD-R lately. I saved a disc image and tried to burn it with the disk utility. Everytime I get the following error: Unable to burn "name.img" - the device failed to respond properly, unable to recover or retry.
    iDVD keeps giving me a multiplexor error. Nonetheless, I don't understand the error from disk utility. Why or how could a device fail to respond? Any other suggestions? Thanks in advance.

    Are you doing it right? see below:
    File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006

  • Web.accButton("Xpath") does NOT work with error "failed to respond"

    web.accButton("web:dialog_unknown[@text='Do you want to open or save this file?']/web:accPushButton[@index='1' or @name='Save']").click();
    Got exception: Object "/web:dialog_unknown[@text='Do you want to open or save this file?']/web:accPushButton[@index='1' or @name='Save']" failed to respond to action: <Message name="Click"><Parameter AppType="Acc"></Parameter><Parameter Accindex="1"></Parameter><Parameter role="PushButton"></Parameter><Parameter handle=""></Parameter><Parameter WindowIndex=""></Parameter><Parameter DocumentIndex=""></Parameter><Parameter tag="accPushButton"></Parameter><Parameter index="0"></Parameter><Parameter type="element"></Parameter></Message>.
    Version Info:
    Version: 12.1.0.1 Production
    Build ID: 2.7.1.361
    32bit on Windows XP
    Edited by: 1006468 on 2013-5-16 下午8:29

    Hi Dianlong,
    Please check if SAP note 1132501 is relevant for your ECC release. If you apply the note, you may have to re-generate the web service from the function module.
    Regards, Trevor

  • OSX crached with error "cpu 1 failing to respond"

    Hi,
    It happen to me several time now... maybe 4-5 time since 2 months.... I never had any problem like that at first. I come back and saw that screen asking me to restart the computer with the power button. When it boot back into OSX i have the report problem opened:
    Fri Sep 26 06:37:50 2008
    panic(cpu 0 caller 0x00192FD4): "pmapflushtlbs() timeout: " "cpu 1 failing to respond to interrupts, pmap=0x536500 cpustosignal=2"@/SourceCache/xnu/xnu-1228.5.20/osfmk/i386/pmap.c:4570
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x5b367958 : 0x12b0fa (0x4592a4 0x5b36798c 0x133243 0x0)
    0x5b3679a8 : 0x192fd4 (0x45f414 0x1 0x536500 0x2)
    0x5b367a18 : 0x1932b8 (0x5 0x1 0x0 0xa68d834)
    0x5b367ac8 : 0x195721 (0x536500 0x5520d000 0x0 0xfeaa9068)
    0x5b367b28 : 0x169e6f (0x536500 0x5520d000 0x0 0x5520e000)
    0x5b367c48 : 0x16a437 (0x5520e000 0x0 0x1 0x0)
    0x5b367c88 : 0x164699 (0x1a5bf78 0x5520d000 0x0 0x5520e000)
    0x5b367cc8 : 0x3f1732 (0x1a5bf78 0x5520d000 0x1000 0xe91)
    0x5b367ce8 : 0x3eb79c (0xc5cd280 0x0 0x1 0xe91)
    0x5b367d08 : 0x3eb869 (0xc5cd280 0x0 0x5b367d58 0x6b30400)
    0x5b367d28 : 0x43ab8f (0xc5cd280 0x5520d000 0x0 0xe91)
    0x5b367d78 : 0x18801e (0x6b30400 0x72f85ac 0x72f85c0 0x11d975)
    0x5b367db8 : 0x12d17e (0x8c52bac 0x72f8590 0x0 0x0)
    0x5b367df8 : 0x126257 (0x8c52b00 0x0 0x18 0x5b367ee4)
    0x5b367f08 : 0x1973dd (0x5b367f44 0x0 0x0 0x0)
    0x5b367fc8 : 0x19f3b3 (0x12be5c20 0x0 0x1a20b5 0x12be5c20)
    Backtrace continues...
    BSD process name corresponding to current thread: firefox-bin
    Mac OS version:
    9E17
    Kernel version:
    Darwin Kernel Version 9.4.0: Mon Jun 9 19:30:53 PDT 2008; root:xnu-1228.5.20~1/RELEASE_I386
    System model name: iMac7,1 (Mac-F42386C8)
    What can i do ?

    Whoa ! I thought i was the only one with thse panics too !
    I'm getting them too and my system is very unstable ever since 10.5.5
    I have a feeling it's graphics related somehow. I have a Radeon x1600 graphics card in my MBP. What do you guys have ?
    Also, for those of you with the firefox-bin as the identified crashed process, are you using the Firefox 3.1 Beta 1 version by any chance ? What version of Firefox are you using ? just trying to see if we have something in common here cause me too i've done the hardware test and my MBP passed it with flying colours..
    Thu Nov 6 09:12:08 2008
    panic(cpu 0 caller 0x00193077): "pmapflushtlbs() timeout: " "cpu(s) failing to respond to interrupts, pmap=0x536500 cpustorespond=0x2"@/SourceCache/xnu/xnu-1228.7.58/osfmk/i386/pmap.c:4580
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x478838a8 : 0x12b0fa (0x459234 0x478838dc 0x133243 0x0)
    0x478838f8 : 0x193077 (0x45f3a4 0x536500 0x2 0x19d8f8)
    0x47883968 : 0x19420b (0x536500 0x3ae39000 0x0 0x19d8f8)
    0x47883a08 : 0x17406f (0x3a21f 0x0 0x47883a58 0x16548c)
    0x47883aa8 : 0x169e3a (0x105421a4 0x0 0x0 0x1000)
    0x47883bc8 : 0x16a437 (0x3ae3a000 0x0 0x1 0x0)
    0x47883c08 : 0x16b38c (0x1573e10 0x3ae39000 0x0 0x3ae3a000)
    0x47883ce8 : 0x1276fd (0x1573e10 0x3ae39000 0x0 0x50)
    0x47883d78 : 0x14c184 (0x4f7a814 0xf41a69c 0xf41a6bc 0xf41a6a8)
    0x47883db8 : 0x12d17e (0xf4084ac 0xf41a680 0x0 0x0)
    0x47883df8 : 0x126257 (0xf408400 0x0 0x18 0x47883ee4)
    0x47883f08 : 0x1974c2 (0x47883f44 0x0 0x0 0x0)
    0x47883fc8 : 0x19f4a3 (0x7750d40 0x0 0x1a20b5 0xa0d8820)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfffe958
    BSD process name corresponding to current thread: pmTool
    Mac OS version:
    9F33
    Kernel version:
    Darwin Kernel Version 9.5.0: Wed Sep 3 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386
    System model name: MacBookPro2,2 (Mac-F42187C8)
    and another one :
    Fri Oct 31 16:49:24 2008
    panic(cpu 0 caller 0x00193077): "pmapflushtlbs() timeout: " "cpu(s) failing to respond to interrupts, pmap=0x536500 cpustorespond=0x2"@/SourceCache/xnu/xnu-1228.7.58/osfmk/i386/pmap.c:4580
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x479f37c8 : 0x12b0fa (0x459234 0x479f37fc 0x133243 0x0)
    0x479f3818 : 0x193077 (0x45f3a4 0x536500 0x2 0x19d8f8)
    0x479f3888 : 0x19339d (0x0 0x1 0x0 0xab2971c)
    0x479f3938 : 0x195806 (0x536500 0x41791000 0x0 0xfea0bc88)
    0x479f3998 : 0x169e6f (0x536500 0x41791000 0x0 0x41792000)
    0x479f3ab8 : 0x16a437 (0x41792000 0x0 0x1 0x0)
    0x479f3af8 : 0x164699 (0x1573f78 0x41791000 0x0 0x41792000)
    0x479f3b38 : 0x3f1651 (0x1573f78 0x41791000 0x1000 0x479f3b6c)
    0x479f3b78 : 0x3f143a (0xcbcfec0 0x2000 0x479f3bc8 0x38ad78)
    0x479f3ba8 : 0x3f12ea (0xcbcfec0 0x3c 0x479f3be0 0x479f3bdc)
    0x479f3bc8 : 0x3efd32 (0xcbcfec0 0x580b860 0x479f3c00 0x20)
    0x479f3c38 : 0x3ef201 (0x580b860 0xcbcfec0 0x49a804 0x3f1462)
    0x479f3c78 : 0x3ec638 (0x10d56540 0xcbcfec0 0x49a6c4 0x3f13f5)
    0x479f3ca8 : 0x3ef201 (0xfdc9a40 0xcbcfec0 0x49a804 0x0)
    0x479f3ce8 : 0x40ab86 (0xfeafbc0 0xcbcfec0 0x479f3d28 0x3eea60)
    0x479f3d08 : 0x40e49b (0x5087000 0xcbcfec0 0x479f3d58 0x5087000)
    Backtrace continues...
    BSD process name corresponding to current thread: firefox-bin
    Mac OS version:
    9F33
    Kernel version:
    Darwin Kernel Version 9.5.0: Wed Sep 3 11:29:43 PDT 2008; root:xnu-1228.7.58~1/RELEASE_I386
    System model name: MacBookPro2,2 (Mac-F42187C8)
    Thanks,
    Adi

  • Unable to chat "because user failed to respond"

    I and my family are having trouble using iChat AV for video chat. The problem also affects audio chat.
    Essentially, when person A invites person B to chat, and person B accepts, there is a delay with the spinning indicator (which always pauses momentairly in this process) and then person B sees an error message saying that person A "failed to respond". Messaging works fine.
    My father experienced this issue first, unable to connect to my brother. However, I was able to connect to both of them. Recently, I was invited to download an iSight Updater, and since this the problem now affects me.
    My father uses iChat AV v3.1.6 (v441) on OS 10.4.8 on a G5 iMac
    I use iChat AV 2.1 (v153) on OS 10.3.9 on a G4 iMac
    I believe my brother also uses OS 10.3.x
    Can anyone provide any assistance as this problem is getting us down! Thanks!
    iMac G4 Flat   Mac OS X (10.3.9)  

    Hi Perseverance,
    This info suggests that ports for iChat are not open somewhere such as the Mac Firewall or the modem.
    4:24 PM Wednesday; January 24, 2007

Maybe you are looking for