Failed to restore ipod with itune 7.6

I found the following post for iTunes 7.4.3, but the same case for my iTunes 7.6 + firmware 1.1.4. Tried the suggested solution but no luck.
http://docs.info.apple.com/article.html?artnum=306084
I keep getting "The iPod "[username]" could not be restored. An unknown error occurred (1601)" Error

Problem solved, I've brought my iPod back to life =D
Let me have a re-cap of what had happened on my ipod
[ Cause ]
iPod running out of power, and shut down itself. I didn't realize this and tried to turn on it again, and problem started ... (i lately found that it fell into recovery mode)
[ Symptom ] (I've experienced many errors, all shown below)
1. blank black screen (expected), the screen showed nothing even in progress of recharge, reset or restore. and ipod fell into recovery mode.
2. blank white screen and yellow screen during restore
3. iTunes give unkonwn error 1, 1601, 1604, 6 and -6
4. computer cannot detect iPod suddenely
5. restore process looked good, but failed at the stage "verifying iPod firmware"
6. iPod ran into DFU and iBoot recovery mode when connecting to PC.
[ What I have done ] (i dare not call it solution, as i have tried so much reset-restor-reset-restore ... on it)
# when problem (4) occurred, I reset iPod and put it in recovery mode (by pressing Power + Home button for 10 sec with USB cable plugged to PC, and "Apple Recovery (DFU) USB Driver" would show in PC Device Manager. Run iTune and would force you to restore.
# when updating firmware, it was detected as "Apple Recovery (iBoot) USB Driver". Then changed to DFU and forced you to run iTunes again to restore.
# when problem (3) occurred, I repeatedly tried restore-restore-restore... until it gave the same error (and my last error is unknown error 1601)
# I did un-install and re-install iTunes
BUT, regardless so much i've worked on it, i strongly believe the ONLY THING i'll try next time if problem occur again:
No matter what you see on the screen, even nothing, and whatever it is detected in PC, FULLY RECHARGE IT first before you do anything. It'd likely come back to life AUTOMATICALLY. If it doesn't work, put it aside for some days, come back and try again.
my last comment: iPod is great, but iTune itself is stupid. It's interesting to find many ipod fans world trying their very best to help iTunes to explain what does 1601,1604,-6 actually means, and to give known solutions for unknown errors.

Similar Messages

  • Infinite problem "restore ipod with itunes"

    I have the newest gen 160gb ipod and "sometimes" when I plug the cable the ipod reset itself, like there is no longer mp3. After a blank screen, I restart the ipod and I have to restore with itunes...I've changed the pc, cable...Still the same situation...
    I send the ipod to local assistence and they say that it's all ok.
    I've this ipod by two weeks and I've restore the ipod like 30 times...
    Any solutions?
    Thanks

    Hello there,
    And welcome to Apple Discussions!
    So, are you repeatedly being asked to restore your iPod by iTunes similar to that described in this Apple support document?
    [iTunes has detected an iPod in recovery mode - Use iTunes to restore|http://support.apple.com/kb/TS1456?viewlocale=en_US]
    If the same message keeps appearing, you may have to reassign your iPod's drive letter. You can find instructions on how to do this in this Apple support document.
    http://support.apple.com/kb/TS1493#changedrive
    Hope this helps.
    B-rock

  • Syncing iPod with iTunes fails with error (-69) appears

    When syncing my iPod with iTunes an error appears saying syn has failed to "my" iPod due to unknown error (-69). Is there a solution for this problem?

    Perhaps a corrupted iPod? Why not try a restore (warning: will erase and then resync everything) and see if that clears it up?
    Patrick

  • Ipod stuck on black screen(soft dtf) and my home button is broken. i also cant restore it with itunes as it shows error 6. any help?

    So. my home button was broken and i wanted (stupid idea) to jailbreak my ipod, i used the new redsn0w Dfu ipsw, then tried to put it in dtf mode via itunes. how ever now its just stuck on a black screen, i tried t restor it with itunes but that just comes up with an error. help?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Last,
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar 

  • After formatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes.

    After reformatting iPod to NTFS and restoring back with iTunes, the player works for two-three weeks and crashes afterward. It then requests to restore it through iTunes. When connected to iTunes, it sees it in the restore mode and also asks to restore the iPod. It happens over and over for the last months. What could be the problem?
    iPod Classic 80Gig.
    Thanks in advance.

    Dear planb77
    Thanks for a reply. iPod does not support ntfs - you're right. that means it will never work on that. While restoring ipod using iTunes, itunes reformats it no matter what filesystem is there. So the issue is not that. ipod is now on fat32 and it works for a certain period of time, but then crashes and asks to restore through itunes. Resetting/restarting does not help.

  • Restored Ipod now Itunes will not sync with Ipod music shows to be in library

    Restored ipod, now Itunes will not sync with ipod, music still shows to be in my library. Ipod does show to be under a new name.  How do I get the music back on ipod. note Ipod is classic modle

    Hello Cobre,
    After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning syncing:
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info how can i activate it

    I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info and I do not know how to get in touch with him I have had third gen ipods and never had any problums like this before Help!!!

    Either get the Apple ID and password from him to activate the iPod
    iCloud: Find My iPhone Activation Lock in iOS 7
    or have him remote remove the device from his account
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    or return it for a refund.
    Otherwise you have an expensive, thin brick

  • My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

    my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
    Diagnostics test
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    ECS G31T-M7
    iTunes 10.5.2.11
    QuickTime 7.6.9
    FairPlay 1.13.37
    Apple Application Support 2.1.6
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 4.0.0.97
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0012ABAC07F3CCB0
    Current user is an administrator.
    The current local date and time is 2011-12-31 14:06:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel(R) G33/G31 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
    Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.5
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Sat Dec 31 13:46:09 2011
    Lease Expires:       Tue Jan 03 13:46:09 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was unsuccessful.
    The network connection timed out.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-12-31 14:00:02.
    **** Device Connectivity Tests ****
    iPodService 10.5.2.11 is currently running.
    iTunesHelper 10.5.2.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    rawkiss’s iPhone, iPhone 3G running firmware version 4.0
    Serial Number:       86931UEAY7H
    **** Device Sync Tests ****
    Sync tests completed successfully.

    I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
    Here is a link that will take you directly to the Tech Note:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
    When using this fix the Tech Note indicates:
    "Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
    however it did retain the captions (at least it did for me).

  • Every time I repair my iPod with iTunes, it hangs at the end of the process (while checkin the recovery of iPod). What can I do?

    every time I repair my iPod with iTunes, it hangs at the end of the process (while checkin the recovery of iPod). What can I do?

    I chose to restore it to factory defaults, but that never succeeded.
    It hangs at the end of the process.
    printscreen:
    http://users.telenet.be/kevvanbelle/iPod/ipod.JPG
    Language is Dutch :-)
    Littery it says:
    Check of Recovery of iPod.
    Already for 40 minutes.
    I closed down iTunes.
    Now, when I turn on my iPod, there is the icon of iTunes with an usb cable towards it.
    When I attach it to my computer and turn on iTunes, the message is there that a iPod was stuck in recovery mode and I should retry it.
    And then I get the same story. Unpacking, installing, checking... blocked!

  • Why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

    why does my itouch,after i restored it with itunes, it turned of and kept turning on to the apple and it still doing that?

    Sounds like a hardware issue. Have it serviced if it's in warranty.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • When I attempt to sync my iPod with iTunes, "iTunes could not copy "songname" to the iPod because an unknown error occurred (-69)" HELP!!

    When I attempt to sync my iPod with iTunes, "iTunes could not copy "songname" to the iPod because an unknown error occurred (-69)" appears, I have attempted to restore my iPod settings but this doesn't help at all. This only happened after I installed the latest update of iTunes.

    See Here :
    http://support.apple.com/kb/ht1210

  • Each time i try syncing my ipod with itunes, it freezes itunes and i end up having to shut down my computer.  This happened after the latest download, any suggestions?

    each time i try syncing my ipod with itunes, it freezes itunes and i end up having to shut down my computer.  This started happening after the latest download and my latest purchase.  The latest purchase doesn't show up on my iPod and itunes freezes at synching step 2 on 2.  Any suggestions?

    You should Reset your iPod, by
    1. Press Menu and Center button simultaneously for about 10 Secs till the Apple Logo comes ON.
    2. Disconnect the sync cable.
    3. Check the iPod Welcome screen, select language, go to menu (if you are lucky, your music are still on the iPod.)
    if your iPod doesn't show the Welcome screen, bring it to Apple Store.
    If the above is okay, (can see Menu but no Music)
    4. Close iTunes and Reboot your PC.
    5. Start iTunes
    6. Connect the iPod to the Sync cable.
    7. if iTunes ask to Restore, please do so.
    8. Sync your iPod. ( I would advise you to disconnect from Internet and stop the Antivirus program when doing this.)
    Good Luck.

  • Cannot sync ipod with itunes after setting up new computer with newest version of itunes

    Cannot sync ipod with itunes after setting up on new computer, only songs which tansferred were songs bought on new computer after set up, tried to sync songs and it deleted old songs from ipod.  How can I get them back on ipod??  They are showing in music library on itunes still.

    If the iPod database gets corrupted, it will add files to "Other" instead of where they really belong.
    Restoring the iPod will erase this database and recreate it.
    And if I do this, won't I just have the same issue when my iPod is re-updated to the most recent version again?
    No, it shouldn't. This is why you Restore the iPod. It erases the corrupt database.

  • TS1814 i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    i wana restore my iphone 3g but when i restore it with itunes after some time is say  '' iphone could not restored unknow error 1015 '' help me please

    99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
    Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

  • When I try to sync my iPod with iTunes I can't because it says it's over capacity. It's not. It's a 16 GB iPod, it's only 105 songs on there. No movies or pictures or such. Anybody got a word of advise?

    When I try to sync my iPod with iTunes I can't because it says it's over capacity. It's not. It's a 16 GB iPod, it's only 105 songs on there. No movies or pictures or such. Anybody got a word of advise? I've tried resetting the iPod but get the message that it's not possible cause i'm not connected to internet. I am though. Tried managing music manually. I've tried all the usual stuff.

    Go to Settings > General > Usage and see how much is shown available and how much is in "Other".

Maybe you are looking for

  • Hostchecker is not installed properly

    If your Juniper Software is not working on Local Machine While trying to connect to Client Environment. So Just follow following things. Option 1:- Tools Internet Option**  Advanced  Click on 'Reset' Check in box 'Delete Personal Setting'  Clic

  • F110 - Vendor Bank Selection

    Hello All, Can anyone please suggest me on the following issue. The vendor has two banks ex: X & Y, whenever the APP get runs, the system should pick up the X account of vendor but where as in my case it is picking Y account.  There is no problem wit

  • Playhead will no longer position itself in between clips in Final Cut Pro X timeline

    I have been using Final Cut Pro X and it used to position the playhead in between clips with ease so I could drag down the audio and position it at the exact placement of playhead where I wanted it at the beginning of a new clip. However, now the pla

  • Black Preview window

    So i edit all the time, i'm using FCP 6.0.6 and i was editing some random stuff about an hour ago and all of a sudden my timeline preview window went black, I can hear the audio and i can see it in the left window but i can't see it in the window tha

  • Come posso trasformare la mia versione di photoshop c3 extended in photoshop c6?

    ciao, ho un abbonamento adobe, prima di avere il computer nuovo avevo photoshop c6 e mi trovavo benissimo, ora ho comprato il pc nuovo e dentro chi me l ha venduto mi ha regalato photoshop c3, solo che quando ho installato photoshop c6 da adobe creat