Failed to run TS: SAP GUI 720 EN x64

We have several machines failed to run TS: SAP GUI 720 EN x64
Here's the smsts.log
Failed to run the action: TaskSequence Failed.
The operation completed successfully. (Error: 00000000; Source: Windows) TSManager 12/9/2013 12:33:50 PM 5020 (0x139C)
Sending status message . . . TSManager 12/9/2013 12:33:50 PM 5020 (0x139C)
Send a task execution status message SMS_TSExecution_ActionFailError TSManager 12/9/2013 12:33:50 PM 5020 (0x139C)
Formatted header: TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:5f93786e-447b-4ba1-baad-da6a065d09d0</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2013-12-09T17:33:51Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="2674"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Set a global environment variable _SMSTSLastActionRetCode=0 TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Clear local default environment TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Let the parent group (If INI not exist) decides whether to continue execution TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Let the parent group (SAP GUI 7.20Bit64 EN) decide whether to continue execution TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
The execution of the group (SAP GUI 7.20Bit64 EN) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Failed to run the last action: TaskSequence Failed. Execution of task sequence failed.
The operation completed successfully. (Error: 00000000; Source: Windows) TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Sending status message . . . TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Send a task execution status message SMS_TSExecution_TaskSequenceFailError TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Formatted header: TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
<Msg SchemaVersion="1.1" ReplyCompression="zlib"><ID/><SourceID>GUID:5f93786e-447b-4ba1-baad-da6a065d09d0</SourceID><SourceHost/><TargetAddress>mp:[http]MP_StatusManager</TargetAddress><ReplyTo>direct:OSD</ReplyTo><Priority>3</Priority><Timeout>3600</Timeout><SentTime>2013-12-09T17:33:51Z</SentTime><Protocol>http</Protocol><Body
Type="ByteRange" Offset="0" Length="2094"/><Hooks/><Payload Type="inline"/><TargetHost/><TargetEndpoint>StatusReceiver</TargetEndpoint><ReplyMode>Sync</ReplyMode><CorrelationID/></Msg>
TSManager 12/9/2013 12:33:51 PM 5020 (0x139C)
Task Sequence Engine failed! Code: enExecutionFail TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
**************************************************************************** TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Task sequence execution failed with error code 80004005 TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Cleaning Up. Removing Authenticator TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Cleaning up task sequence folder TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Successfully unregistered Task Sequencing Environment COM Interface. TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Executing command line: "C:\Windows\SysWOW64\CCM\TsProgressUI.exe" /Unregister TSManager 12/9/2013 12:34:19 PM 5020 (0x139C)
Don't see useful information in execmgr.log, etc.
Anyone can tell what's the problem? Anyother information, you need?

Hi
thanks for the replies.
I did check the issues:
Yes, the saprule.xml file is availabe in the install-folder.
I did check the MSXML and it is installed. However, I reinstalled it with the package from the compilation CD
..but, still the same error!
Anything it could be? Perhaps some false registry entry etc.?
Regards
bivision

Similar Messages

SAP GUI 720 - difference between Classic, Enjoy and Signature

Hi experts,
We intend to use the SAP GUI 720 for Finance uers entering journals and using workflow. I have checked out the PC requirements for the GUI and they vary depending on whether you opt for Classic, Enjoy or Signature design.
Can anyone explain what the difference is between these options?
many thanks
mike

Hi Adrian,
the difference is the look and a few option (like setting a different color in the different systems (like different colors for E, Q and P), a focus frame, and so on.
I googled for some pictures:
Signature Theme: http://www.sapdesignguild.org/resources/vd_images/revolutions/GUI_Signature_Theme.png
Enjoy Theme: http://www.sapdesignguild.org/resources/vd_images/revolutions/Win_Enjoy_Tradeshow_Themes_large.png
Classic Theme: http://support.citrix.com/article/html/images/CTX127399-2.gif
I prefer using the Signature Theme because it is clear and has the focus frame.
Hope this helped.
Regards,
Jann

SAP GUI 720 shortcuts and history

Hi guys!
decided to upgrade install server to SAP GUI720 .
I upgrade new install server to patch level 8.
When i have patch level 0 SAP GUI after installing always create shortcut on users desktop.
after updating (patch level 8) the shortcut no longer creates.
After install hsitory file default creates in C:\
All users don't have permissions on write in partition C:\ .
Because of this SAP history is not saved.
Everybody knows how solve problem with shortcut after install and adjust the path to the *.mdb file ? When the SAP GUI is installing on the workstation, the path to the *.mdb file are written automatically.
Thanks

I try install SAP GUI with admin and users rights in both cases shortcut not installed on desktop.
OC Windows XP
In logs 14:18:36 NwSapSetup 1   Return-Code: 0
1E or 2E not see
may be a registry key that is responsible for the shortcut and it is not written correctly?
in install log, its not errors?
14:09:19 NwSapsAtlC 1        |-----SAP GUI Suite -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP GUI -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP Logon Pad -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP Logon -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---Tweak-GUI -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---SAP GUI Scripting -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---GUI XT -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---Shortcut to SAPlpd -- Dirty! --
14:09:19 NwSapsAtlC 1        |---     |---Unicode RFC Libraries -- Dirty! --
14:09:19 NwSapsAtlC 1        |-----R/3 Add-On -- Dirty! --

SAP GUI 720 (patch level 6) - Date field problem

Hello all,
in selection screens (like transaction IW38) some users use the F4 help and the enter key to select a date (like field "Period"): they jump with the tab key to the field, delete the current entry and then press F4 and hit the enter key in the popup to get today's date. (Reason: faster than using the mouse, they say...)
This does not work anymore with SAP GUI version 7.20: The enter key is not working in the popup. Does anyone know a fix for this or is it intended to work this way?
Thanks in advance for an answer!
Best regards
Daniel

Thanks for your reply. No, GuiXT is not active.
Interesting is:
I have a PC with an older version of SAP GUI 7.20 (patch level 2). There it works as previously with 7.10 (hitting the enter key in the calendar popup window works).
The reason is (haven't noticed that before), that in 7.20_2 the focus in the calendar popup is in the calendar itself (the lower part). In 7.20_6 the focus is on the top line, where the current date is displayed (like 29.08.2011), and the day is highlighted. The user has to press the tab key to jump from there down to the calendar, and then can press the enter key.
Now the question is: has this been changed from patch level 2 to 6, or is it an SAP GUI option, that can be changed (and that I cannot find)??
Best regards
Daniel

Create an install CD for SAP GUI Windows Patch Level 4

Hello,
I would like to create an Install CD for SAP GUI 720 for Windows with Patch Level 4
so that my user just install once.
From the market place, I can download Patch Level 0 distribution.
It is a Zip file that I can extract and use to generate an Install CD.
But it is LVL 0 only,
Then, I can download the Patch 4 executable file.
Unfortunately, the only way I can go to patch 4 is to execute this new program on my installed GUI.
Is there a way to generate, or even better download, an install CD that would contains the PL4?
so that the user just does one install and does not have to run the patch executable after the install.
If yes, how can I do it?
Thanks in advance for your help.

> No my idea was to generate a CD with PL 4 now.
You can do that using an installation server, you can create a single .EXE file and burn in to a CD for the user.
> We test it and stand to it for a long time.
We tried to do that in the last 15 years we're doing SAP, unfortunately there come always situations, where you don't get around installing patches on PCs. This is especially true for BW, where the tools used depend (more or less) to the patchlevel of the backend system. However,
> Would someone know where I could get the release date of these compilation CD fro 720 Windows GUI?
The patch dates/weeks are listed in "Note 1053737 - Expected release dates for SAP GUI for Windows & ITS Patches", however, they are estimates.
I would assume that the next compilation will be released with Business Suite 7i2010 (or whatever name it is actually). Those compilation CDs are neverless always at least one patch behind the actual one.
Markus

SAP Gui 730 issue with crobu theme

Hello Frineds, Our developer team is facing some strange issue. They are able using corbu theme in SAP GUI 720. but after the new SAP GUI 730 implementaion, they are not able to use this theme. Checked all the notes etc, but its not clear on themes part. Any one faced this kind of issue or any suggestions. Thanks in advance. Regards Munish

Hi Munish,
Can you raise this in ABAP community ?
Also, to help you further can you drill down to some more relevant information ?
As far as one can understand, it's a rendering problem with SAP GUI 730.
This can also be compatibility issue with your kernel and application.
I would suggested you to check all above options.
Regards,
Divyanshu

BEx Analyzer with GUI 720 and MS Office 2010 does not work

I have recently installed SAP GUI 720 with BEx addon (7 and 3.x) on a computer with Office 2010 and Windows 7.
All BEx components work fine except Analyzer 7.
When starting Analyzer 7 nothing happens.
I have tried instead starting transaction RRMX from a BI system but this generates a short dump.
Does anyone have an idea about what could be the problem?
<<text removed>>
Best regards,
Didrik
Edited by: Matt on Sep 22, 2010 8:17 AM

Hello Didrik von Essen,
guess its issue with Excel Addins. i rectified the same issue by enabling the excel addins.go to Application wizard. and change the please find the screenshot . let me know if it works

Error in installing SAP GUI 7.20

hi,
I am new to this community.
When i installed SAP Gui 720 in user system(win XP ) i got a error message like "installation completed with 89 errors "
Can anyone help me to resolve the problem.
the same installation is successfully completed in another user system( win XP ).
What will be the problem and how to resolve it ?
Waiting for your advice.
Regards,
Senthil.

try locate the sap setup log, i.e
%ProgramFiles%\Sap\SAPSetup\Errors
%ProgramFiles%\Sap\SAPSetup\Logs
for example: C:\Program Files\SAP\SapSetup\LOGs in affected client PC ?
and check if there is any significant errors.
probably it could be .NetFramework issue on client.
You can try to clean remove, and reinstall, with following steps on the affected workstation
and see if it fixed the problem?
- Remove the current SAPGUI
- After this, please make sure that the folder
:/program files/SAP/Frontend is properly removed. Otherwise, delete it
anually.
- Make sure that no other versions of SAPgui exist on your PC.
- Remove everything in your recycle bin, then reboot your PC.
- Clear your recycle bin and reboot your PC first below re-installing
our SAPgui again.
- Install GUI 720 and apply the latest patch.
Hope this helps.
Regards,
Vincent

JavaScript onKeyUp() not working in a BSP integrated in SAP GUI

hi everybody.
we want to run a bsp application in sap gui using the Javascript based WYMeditor.(http://www.wymeditor.org/) But thought this wysiwyg editor is working fine while testing in a seperate browser window it won't work while integrated in SAP GUI.
It seems that the editor reacts with the Javascript onKeyUp() method to the user's input and that this won't work while running in SAP GUI because the keyboard events are intercepted by the SAP GUI.
The BSP is integrated in the GUI using a cl_gui_custom_container control and its SHOW_URL method.
We would be glad if anyone could help. Thanks in adavance!
regards,
Stefan

hmm... seems that nobody have had such a problem before.
the strange thing is that the editor works fine when the website is loaded the first time. but when any event is triggered due to the click of a button and the site is loaded again, the editor won't work. and the html-code and javascript is exactly the same!
so what happens when the eventing (do_handle_event) of the mvc model of the bsp is triggered? i would be glad if anyone would have some ideas.
Edited by: Stefan Tanck on Oct 31, 2008 10:22 AM

Workbooks becoming corrupted using Windows 7, Office 2010, BEx 3.x, GUI 720

Hi Experts.
I have just been upgraded from XP to Windows 7 and from Office 2003 to Office 2010. I have installed SAP GUI 720 patch level 5 and I've patched the BEx 3.x portion as well since we are still on BEx 3.x queries and workbooks.
I can execute queries and workbooks with no problems. When I save a workbook, and then I try to reopen that workbook it's corrupt. Excel doesn't even recognize the file format. When I tell Excel to open it anyway, it's in machine language.
I ran the installation check for the Business Explorer and it found 54 RED errors. I uninstalled and reinstalled again, but still have gotten the 54 RED errors. Any ideas how to fix this?

Dear Adam,
Unfortunately Excel 2010 has a lot of bugs.
The SAP is working on these issues but, it seems the issue lies over a Microsoft DLL.
Per my experience, I recommend you to use Excel 2003 or Excel 2007. They are working fine with BEx Analyzer.
Kind regards,
Rafael Lermann

SAP GUI For HTML - Keyboard Navigation

Hello,
I have a transaction iview (tcode - FB50) and it runs on SAP GUI for HTML. I have 2 queries.
1) In the table i can use tab key to jump to other columns. But i am not able to select dropdown values through keyboard. Is that a limitation ?
2) After selecting a dropdown through mouse, i am not able to go to the next column by pressing tab.
Is their any solution to this ?
Any help will be much appreciated.
Thanks,
Abhishek

Dear Abhishek,
Using SAP GUI for HTML has some limitations.
One cannot expect to have the same behaviour 100% exactly like you have on SAP GUI.
So I'm afraid the issues you mention belong to those limitations.
But please do make further research on OSS to see if you can find any alternative or recent improvement by SAP.
I for myself don't know any.
Kind Regard
/Ricardo Quintas

Entry point error while installing SAP GUI 7.20 compilation 3

Hi Experts,
I couldn't install SAP GUI 7.20 compilation 3 in my PC, I used SAP GUI in my PC a year ago but later I formatted my disk. Now when I click on SAPGUISETP it is throwing the following error
The Procedure entry point ?FeiDbgException@@YAXVCWin32Exception@@@Z could not be located in teh
dynamic link library NwSapFeiLg.dll
Can anyone please advise?
NB P.s: Initially it mentioned the dll files NWSAPFEIUT.dll & NwSapFeiLg.dll were missing just now I copied them to System & System32 folders. But even though it is showing this entry point error. Also i have done a clean boot and tried installing it but in vain.

Hi
Please can you check the version of nwsapfeilg.dll in C:\Program Files\SAP\SapSetup\setup
The issue was caused by a version conflict. nwsapfeilg.dll.
Complete Installation SAP GUI 720 + Frontend
http://wiki.sdn.sap.com/wiki/x/CIENDw
Please check if this solves the issue.
Regards,
Naveen.

Need to supress 3 min wait notification while installing SAP GUI 7.3

Hi, when installing SAP Gui 7.3 for windows(Patch 9) in a workstation I am getting a 3 minute wait notification at first and after 3 minutes it is getting installed. I need to supress this notification, how can I do that? please help.

Hi
Please can you check the version of nwsapfeilg.dll in C:\Program Files\SAP\SapSetup\setup
The issue was caused by a version conflict. nwsapfeilg.dll.
Complete Installation SAP GUI 720 + Frontend
http://wiki.sdn.sap.com/wiki/x/CIENDw
Please check if this solves the issue.
Regards,
Naveen.

SAP GUI Scripting: Script Is Running.....Help!

Hello all,
I'm new to the forums and have an SAP question problem. I'm an end user of SAP and have been using it since 2002. A couple of weeks ago when I logged into SAP I noticed a red/white icon in the lower right corner of my screen. When I hover over it it says "SAP GUI Scripting: Script Is Running". The problem is, I have never created a script. When I start working in SAP I have noticed a lot of the screens have a different format now and I get a lot of ABAP errors.
After doing some research I found under "Customize Local Layout", "Options" I can uncheck the box "Enable Scripting". I click "Apply" and "OK". Now the red/white icon goes away in the lower right corner and all my screens go back to normal with no ABAP errors.
The problem now is that every minute or two I get a pop up window that says "Scripting support is disabled by the user".
Has anyone else had this problem?
1. I've never created a script. Why is one running now?
2. Is there a way to stop the pop up message "Scripting support is disabled...." if I uncheck "Enable Scripting"?
Thanks for any feedback

Here's the properties of the connection....
http://www.lstwo.com/images/97735141499811194923.jpg
http://www.lstwo.com/images/27092678568585605702.jpg
http://www.lstwo.com/images/02572789823840845106.jpg
Here's the properties of the desktop icon....
http://www.lstwo.com/images/36703668322706084468.jpg
http://www.lstwo.com/images/40729387005252851113.jpg
http://www.lstwo.com/images/48149337890555671928.jpg
I agree, I'm stumped. I even tried looking through the SAP entries in my registry to see if I could find anything. It's a bit confusing but I didn't see anything out of place.

SAP GUI 7.20 Patch 9 Update failed

Hello,
I have patched my Intallation Server with Sap GUI 7.20 Patchlevel 9.4, but the automatic workstation updater fails on the local workstation. Every time when I start SAP GUI it will be updatet ("an update is avaliable on the installation source...")
In the log-file (NwSapSetup.log) is one error:
10:44:28 NwSapsAtlC 1        |-----SAP Automatic Workstation Update --> Installed
10:44:28 NwSapsAtlC 1        |---     |---SAPSetup Automatic Workstation Update Service --> Installed
10:44:28 NwSapsAtlC 1E Fixing the inconsitent state by removing the older version from the database.
10:44:28 NwSapsAtlC 1
How can I fix this problem?
Thanks.
Dirk

Hello Jude,
thanks for your answer, but it dosn't work.
I have patchd the install server with:
- SAPSETUP90P1SP00_3-20008539.exe
- SAPSETUP90P2SP00_3-20008539.exe
- gui720_10-10007878.exe
The problem is the same, tha automatic WS updater means every time he has an new update, but he can't install it.
I create an Error-report Link:[https://service.sap.com/sap/support/message/D/002007974700000562722012]
Dirk

Failed to run TS: SAP GUI 720 EN x64

Similar Messages

Maybe you are looking for