Failed to run X within VirtualBox.

I followed the instructions at https://wiki.archlinux.org/index.php/Be … ure_pacman and https://wiki.archlinux.org/index.php/Vi … nux_guests
to install the ArchLinux 2012.11.01 in VirtualBox (v4.2.4). My host OS is Windows XP.
After installing the base system, I tried to configure X. But 'startx' failed and I found following error messages in the /var/log/Xorg.0.log:
AIGLX error: vboxvideo does not export required DRI extension
AIGIX: reverting to software rendering
Can anyone tell me how to fix this?
Thanks

Boying Lu wrote:How to start a plain X?
Remove any .xinitrc or .xsession from your home directory, and then do startx. That should give you a vanilla twm session with the clock and three xterms on a grey background. Ugly, but it works.

Similar Messages

Running iTunes within a WinXP guest system on Linux host

Since I don't think Apple will release a Linux iTunes version I am thinking about running WinXP as a guest on a Linux host (VMware). Could I safely use iTunes within this virtual machine, buy songs from the iTunes Store,... or would the digital rights management of iTunes fail to run in such a guest system?
Thanks!

I'm trying to do much the same by using VirtualBox on Ubuntu 7.10 (easier to setup networking than VMWare). I haven't bought anything from the Apple Store but I do know that importing CDs though a virtual WinXp doesn't seem to work with iTunes. Other CD/DVDROM apps seems to work OK.
So there may be some fundamental problem with trying to virtualise iTunes.
I know it doesn't work under WINE or CROSSOVER.

Error: Component failed to run due to a Object Package scheduling failure

Hi,
BusinessObjects XI R2 SP 5, FP 5.1
I am trying to schedule a group of reports (crystal reports) via a package where the output destination is to an email. At the event of execution of the scheduled time for the package; the package fails with the error: Component failed to run due to a Object Package scheduling failure. (Note: When scheduled individually it is successful and it was copied to the package from its original location, so there is no mistake in parameters or ODBC connections)
When we go to the history and within the instance, we see that some of the reports have the status as success and some are failed with the same error message. Even though some of the reports are made to fail at the event of 'NO DATA'; what I do not understand is that how come some of the other reports (which contains data and which works when trying to run manually or scheduled individually) are failing.
I would understand something is wrong when the entire package fails which is not the case here as say of 50 reports, 5 are successful and the rest fails with the same error.

Sorry posted on the wrong section...
Edited by: Deepu Philip on Mar 18, 2010 5:38 PM

OEL support within VirtualBox

Hi,
We were wondering, we have an x4170 server with Oracle Premier support. Oracle Enterprise Linux and Solaris are supported. We currently run Solaris as the host OS, and we're wondering if a guest Oracle Enterprise Linux OS would be supported while running within VirtualBox? Or put simply, does being a guest OS invalidate support for said OS, which is in this case OEL?
Cheers,
Tyler

Thanks again for the reply.
In all truth, aren't they the same? Just trademarks switched around, etc? If its not certified, though, then we are forced into it.
I was just following your blog post about OEL 5.3 with oracle database. I downloaded oracle database 11.2 onto OEL 5.3 on x4170, but when I brought up the installer, it was insanely slow. It took like 2 minutes to enter email address and password, and the next button disappeared and wouldn't reappear so I couldn't go any further (JRE related????). I then ran top, java was using 100 to 200% cpu, the graphics server was 70 to 90% cpu, etc. I was wondering if our problems would go away with another os that would allow us to update packages for free. But even on your blog, did you run up2date before installing oracle database?
Or perhaps its safe for us to upgrade to OEL 5.5? Redhat only certifies the x4170 server to OEL 5.3, though. I suppose I'll try OEL 5.5 tomorrow while we wait and see if we can't get a ULN csi (our local reps don't seem to have their act together due to the sun to oracle transition, we're part of a university as well so we may have a site license for it--fingers crossed).
Cheers,
Tyler
Edited by: tfunk on Aug 12, 2010 5:18 PM

Use native ArchLinux within VirtualBox - X Server Problems

Hi everyone!
I followed the Wiki Entry here:
https://wiki.archlinux.org/index.php/Vi … ical_Drive
to use the natively installed Arch within a VirtualBox on Win 7.
So far, I can boot into Archlinux - but the XServer cannot start, because there are some Errors, that the XServer failed to load the NVIDIA Modules.
The Wiki entry also mentions this kind of Problem and suggests a solution to use a second xorg.conf for usage with the VirtualBox.
But right now I do not really have an idea how to load an individual xorg.conf?
And how this xorg.conf should look to use the VirtualBox graphics card?
ArchLinux is installed on a Notebook with a NVIDIA Quadro NVS 3100M and I'm using the proprietary NVIDIA drivers (if I boot natively in Arch, which works fine).
Also I would be grateful for any other solution, if someone has successfully started a natively installed Arch in VirtualBox and has the proprietary NVIDIA driver installed.
Thanks in advance!
Kind regards
PhiGamma

Hello everyone!
There was a NVIDIA specific xorg config file I forgot which was needed for brightness control. I renamed the file and then it was possible to start the X-Server within VirtualBox. But there seems to be a problem with the VirtualBox 3d support and the NVIDIA drivers (eventually due to libgl?). I switched to Nouveau then and everything works fine. I can use 3d support in both cases, VirtualBox and native (I unfortunately need the 3d support for Gnomeshell...).
But personally, I would prefer the NVIDIA Driver, because of the power control facilities which Nouveau lacks right now.
Does somebody know a way to use the NVIDIA Driver an has 3d support within VirtualBox?
Thanks in advance!
Kind regards!
Last edited by PhiGamma (2011-11-07 14:42:42)

Application migrated from 11.1.2.3 to 12.1.2.0 fails to run in IntegratedWebLogic

Hi,
Can anyone help resolving the following problem.
We've been developing an ADF application with JDeveloper 11.1.2.3 and it works fine when run both with its IntegratedWebLogic or when deployed to a standalone Glassfish server.
We want to switch to JDeveloper 12.1.2.0. and use new UI components.
We are able to successfully open the application in JDeveloper 12c - the migration logs say it was successfully converted, all projects, pages, task flows, classes open and can be edited just fine. However the application fails to run with IntegratedWebLogic.
Application is using modules included via ADF shared libraries:
CommonUI.jar and CommonModel.jar -> included in ApplicationModule1 and ApplicationModule2.
Both ApplicationModule1 and ApplicationModule2 work fine when tested with IntegratedWebLogic.
They are in turn included in the MasterApplication as ApplicationModule1.jar and ApplicationModule2.jar.
However the MasterApplication (SLABAccountMaster) fails to run. It gets deployed, but there is an exception when accessing the first page: The UIViewRoot is null. Fatal exception during PhaseId: RESTORE_VIEW 1.
I've posted a fragment of the logs below. I can include all of it - but it's huge.
[Running application SLABAccountMaster on IntegratedWebLogicServer...]
[02:31:02 PM] Web Module AccountViewWebApp.war recognized in project AccountView.jpr
[02:31:03 PM] ---- Deployment started. ----
[02:31:03 PM] Target platform is (Weblogic 12.x).
[02:31:03 PM] Retrieving existing application information
[02:31:03 PM] Running dependency analysis...
[02:31:03 PM] Deploying 2 profiles...
[02:31:06 PM] Wrote Web Application Module to C:\Users\SlawekAr.SLAB\AppData\Roaming\JDeveloper\system12.1.2.0.40.66.68\o.j2ee\drs\SLABAccountMaster\AccountViewWebApp.war
[02:31:06 PM] Wrote Enterprise Application Module to C:\Users\SlawekAr.SLAB\AppData\Roaming\JDeveloper\system12.1.2.0.40.66.68\o.j2ee\drs\SLABAccountMaster
[02:31:06 PM] Deploying Application...
<11-Sep-2013 14:31:10 o'clock BST> <Warning> <Application Client> <BEA-2162200> <No Main-Class defined in the manifest file of Java Module: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped.>
<11-Sep-2013 14:31:13 o'clock BST> <Warning> <HTTP> <BEA-101384> <WLServlet annotation is deprecated, please use servlet 3.0 annotation instead. App:SLABAccountMaster@SLABAccountMaster-AccountView-context-root, Class:oracle.adfinternal.view.faces.activedata.AdsServlet>
[02:31:39 PM] Application Deployed Successfully.
[02:31:39 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[02:31:39 PM] http://172.16.60.102:7111/SLABAccountMaster-AccountView-context-root
[02:31:39 PM] Elapsed time for deployment: 36 seconds
[02:31:39 PM] ---- Deployment finished. ----
Run startup time: 36353 ms.
[Application SLABAccountMaster running on IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7111/SLABAccountMaster-AccountView-context-root/faces/AccountsWorkbench.jsf
<11-Sep-2013 14:31:48 o'clock BST> <Error> <oracle.adfinternal.controller.application.AdfcExceptionHandler> <ADFC-50016> <ADFc: While handling an exception the application's exception handler threw a new exception.
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:194)
at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:95)
at oracle.adf.model.BindingContext.get(BindingContext.java:1316)
at oracle.adf.model.BindingContext.findBindingContainer(BindingContext.java:1027)
at oracle.adf.model.BindingContext.findBindingContainerByPath(BindingContext.java:1875)
at oracle.adfinternal.controller.application.model.UpdateBindingListener.setBindingELVariable(UpdateBindingListener.java:112)
at oracle.adfinternal.controller.application.model.UpdateBindingListener.beforePhase(UpdateBindingListener.java:61)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:557)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:290)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:76)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:356)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:280)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:254)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:341)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:303)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:208)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:137)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:225)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3367)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3333)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2220)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2146)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2124)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1564)
at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:254)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
Caused By: java.lang.NullPointerException
at oracle.adf.model.binding.DCBindingContainerDef.createExecutables(DCBindingContainerDef.java:632)
at oracle.adf.model.binding.DCBindingContainerDef.initializeBindingContainer(DCBindingContainerDef.java:764)
at oracle.adf.model.binding.DCBindingContainerDef.createBindingContainer(DCBindingContainerDef.java:984)
at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:158)
at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:95)
at oracle.adf.model.BindingContext.get(BindingContext.java:1316)
-Sep-2013 14:31:48 o'clock BST> <Error> <oracle.adfinternal.controller.application.AdfcExceptionHandler> <ADFC-50017> <ADFc: While attempting to handle this exception the application's exception handler failed.
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.NullPointerException, msg=null
at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:194)
at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:95)
at oracle.adf.model.BindingContext.get(BindingContext.java:1316)
at oracle.adf.model.BindingContext.findBindingContainer(BindingContext.java:1027)
at oracle.adf.model.BindingContext.findBindingContainerByPath(BindingContext.java:1875)
at oracle.adfinternal.controller.application.model.UpdateBindingListener.setBindingELVariable(UpdateBindingListener.java:112)
at oracle.adfinternal.controller.application.model.UpdateBindingListener.beforePhase(UpdateBindingListener.java:61)
at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:557)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:290)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:76)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:356)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:225)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:593)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:280)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:254)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:136)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:341)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:25)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:192)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:478)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:303)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:208)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:137)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:120)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:217)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:81)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:225)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3367)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3333)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.provider.WlsSubjectHandle.run(WlsSubjectHandle.java:57)
at weblogic.servlet.internal.WebAppServletContext.doSecuredExecute(WebAppServletContext.java:2220)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2146)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2124)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1564)
at weblogic.servlet.provider.ContainerSupportProviderImpl$WlsRequestExecutor.run(ContainerSupportProviderImpl.java:254)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)
Caused By: java.lang.NullPointerException
at oracle.adf.model.binding.DCBindingContainerDef.createExecutables(DCBindingContainerDef.java:632)
at oracle.adf.model.binding.DCBindingContainerDef.initializeBindingContainer(DCBindingContainerDef.java:764)
at oracle.adf.model.binding.DCBindingContainerDef.createBindingContainer(DCBindingContainerDef.java:984)
at oracle.adf.model.binding.DCBindingContainerReference.createBindingContainer(DCBindingContainerReference.java:158)
at oracle.adf.model.binding.DCBindingContainerReference.getBindingContainer(DCBindingContainerReference.java:95)
at oracle.adf.model.BindingContext.get(BindingContext.java:1316)

Refer
6365500 javax.faces.el.EvaluationException: oracle.jbo.JboException: JBO-29000: Unexpected exception caught: java.lang.N…

Failed to run task sequence - 80004005. DNS working though.

I seem to be getting a fairly common generic error but with possibly with a slight difference then some of the other problems/answers I have seen. Generally it looks like this is a DNS issue but I am not sure in my case.
Let me 1<sup>st</sup> describe my infrastructure and what I am trying to accomplish. System Center 2012 R2, trying to deploy server 2012. We use PKI on the main MPs/DPs. I have another DP that I will use for OSD content that
won’t use PKI. I am 1<sup>st</sup> attempting to use boot media, vs PXE, to image a computer. I have distributed the content to the DP, created a boot media USB and everything looks good there as far as I can tell. My boot media
selects the PKI MP and we have created the client cert and I direct it to the non-http DP. The process seems to accept the certificate and the boot media creation completes. Next boot off the media on the computer and drop into Windows PE where
I can manually enter the IP information. When I click next the process fails.
Error:
Failed to Run Task Sequence
An error occurred while retrieving policy for this computer (0x80004005).
So starting some of the troubleshooting I F8.
-Can I ping the SCCM site servers? Yes, I can ping, both short and FQDN, the primary, MP, DP.
Looking at the SMSTSLog I see the following lines/errors.
1)Failed to open PXE registry key. Not a PXE boot.
2)Failed to find the source drive where WinPE was booted from
But then the next line is: Executing from Media WinPE
These 2 are at the top of the log and the process seems to continue on with the IP and variable information. These are the lines of information later in the log with the error(s):
-CLibSMSMessageWinHTTPTransport::Send:URL: (my MP)
-In SSL, but with no client cert
-Error. Received 0x80072ee7 from WinHttpSendRequest.
-Hr,HRESULT=80072ee7
-sending with winhttp failed, 80072ee7
-m_pHttp Transport -> (etc….)
-MPKeyInformation.RequestMPKeyInformationForMedia
-Failed to get information of MP: https//(my MP)
So I am wondering where I start. I don’t see that unknown host line that seems to indicate that it is a DNS issue. I see some stuff about the in SSL but with no cert. Does this mean that the cert we had to create isn’t working correctly?
We pretty much followed
http://www.jamesbannanit.com/2012/05/how-to-build-and-capture-in-configuration-manager-2012-using-https/
I have also looked through this
http://blogs.technet.com/b/configurationmgr/archive/2009/07/27/a-step-by-step-for-using-osd-through-system-center-configuration-manager-2007.aspx
And I have pretty much everything done there except a network access account. Looking at my settings I am set to, “Use the computer account of the Configuration Manager client” However, my computer I am trying to image is a “WORKGROUP” and not
joining the domain. But.. am I really getting that far in the process? Would I be failing to get policy because of this or does this just come into play when I try to get the OS from the DP?

Have you seen this thread?
http://social.technet.microsoft.com/Forums/systemcenter/en-US/528c2b54-55ef-4926-bebb-f73ca18a059b/trouble-deploying-windows-7-using-osd-using-pxe-in-sccm-2007-sp2-r3-error-80072ee7?forum=configmgrosd
I have some free manuals http://1drv.ms/1kk6u6j

How to schedule a job to run twice within a request set?

How to schedule a job to run twice within a request set?

Create one more stage for the same concurrent program.
Thanks
Nagamohan

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Object failed to run due to an error while processing on the Job Server

when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.

hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT.

Failed to Run Task Sequence (error ocurred while retrieving policy for the computer)

Hi, all of sudden we're getting an issue with SCCM when attempting to deploy an image we get a Failed to Run Task Sequence. Used to work previously, now suddenly it isn't working for any.
Full error:
Failed to Run Task Sequence
An Error occurred while retrieving policy for this computer (0x8009310B). For more information....
Log:
Reading Policy Body. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Parsing Policy Body. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Downloading policy body EAB200A4-EAB00066-6F6BCC28. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Preparing Policy Body Request. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Setting transport. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Setting policy location = ttp://<mp>/SMS_MP/.sms_pol?EAB200A4-EAB00066-6F6BCC28.11_00. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Executing Policy Body Request. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
CLibSMSMessageWinHttpTransport::Send: URL: servername.bla.com.au:80 GET /SMS_MP/.sms_pol?EAB200A4-EAB00066-6F6BCC28.11_00 TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Error. Status code 404 returned TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Found a secure policy. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Trying to decode policy. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
CryptDecryptMessage ( &DecryptParams, pbEncrypted, nEncryptedSize, 0, &nPlainSize, 0 ), HRESULT=8009310b (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,339) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Decoding in non ssl mode failed. Checking if decoding was really needed. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Failed to verify a properly formed XML. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
oPolicy.RequestPolicy((GetPolicyFlags() & POLICY_SECURE) != 0, (GetPolicyFlags() & POLICY_COMPRESS) != 0), HRESULT=8009310b (e:\nts_sccm_release\sms\framework\tscore\tspolicy.cpp,2067) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Failed to download policy EAB200A4-EAB00066-6F6BCC28 (Code 0x8009310b). TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
(*iTSPolicyAssignment)->GetObjects(pszClassName, aTSPolicyObjectArray ), HRESULT=8009310b (e:\nts_sccm_release\sms\framework\tscore\tspolicy.cpp,1224) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
m_pPolicyManager->GetObjects( TS::Policy::TaskSequence::GetClassNameW(), TS::Policy::TaskSequence::GetPolicyCategory(), TS::Policy::TSPolicyAssignment::POLICY_TS_FOR_CD_AND_PXE, aTSPolicyObjectArray ), HRESULT=8009310b (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1205) TSPxe 16/01/2015
2:54:40 PM 1176 (0x0498)
Exiting TSMediaWizardControl::GetPolicy. TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
pWelcomePage->m_pTSMediaWizardControl->GetPolicy(), HRESULT=8009310b (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawelcomepage.cpp,303) TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Setting wizard error: An error occurred while retrieving policy for this computer (0x8009310B). For more information, contact your system administrator or helpdesk operator. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
WelcomePage::OnWizardNext() TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Confirmation Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Task Sequence Selection Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Variables Selection Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Skipping Resolve Progress Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Activating Finish Page. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Initializing the countdown timer. TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Loading bitmap TSPxe 16/01/2015 2:54:40 PM 1124 (0x0464)
Suspending the countdown timer. TSPxe 16/01/2015 2:54:49 PM 1124 (0x0464)
Exiting task sequence wizard. TSPxe 16/01/2015 2:54:51 PM 1124 (0x0464)
Exiting with return code 0x00000000 TSPxe 16/01/2015 2:54:51 PM 1124 (0x0464)
Execution complete. TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,515) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,337) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,549) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
::RegOpenKeyExW (HKEY_LOCAL_MACHINE, c_szSMSTSKey, 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,258) TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
RegOpenKeyExW failed for Software\Microsoft\SMS\Task Sequence TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
GetTsRegValue() failed. 0x80070002. TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
End program: TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Finalizing logging from process 840 TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Finalizing logs to root of first available drive TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Successfully finalized logs to C:\SMSTSLog TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)
Cleaning up task sequencing logging configuration. TSBootShell 16/01/2015 2:54:51 PM 856 (0x0358)

CLibSMSMessageWinHttpTransport::Send: URL: servername.bla.com.au:80 GET /SMS_MP/.sms_pol?EAB200A4-EAB00066-6F6BCC28.11_00 TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
Error. Status code 404 returned TSPxe 16/01/2015 2:54:40 PM 1176 (0x0498)
6 (0x0358)
Is the management point still working? Examine mpcontrol.log. Do mplist and mpcert work?
Torsten Meringer | http://www.mssccmfaq.de

Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)

Hi there
Patch Tuesday yesterday (10th June2014). As always we deploy new patches first to a test collection where Windows 7 updates automatically apply.
Upon trying to rebuild any of the machines in this test collection, we were presented with the following error message:
Failed to run task sequence. Error occurred while starting the task sequence (0x8007000E)
After searching about this, I found this page from Niall Brady, which explained the problem:
http://www.niallbrady.com/2013/05/17/after-selecting-a-task-sequence-in-configuration-manager-2012-sp1-you-receive-threadtoresolveandexecutetasksequence-failed-code0x8007000e-in-smsts-log/
So I removed some of the machines from the test Windows update collection, and as per the advice in the above link, the error was gone and those machines could be built successfully.
So the problem is there were too many many policies downloaded (apps, packages and most of all updates) for the task sequence ram to store, hence the error.
Now...
...I have a question.
The next logical step to my mind is to patch our OS image with all missing patches, so these do not have to be downloaded at build time. Niall mentions this as one of the resolutions to this issue.
However there seems to be some confusion over whether this would actually make a difference.
I read through this link:
http://social.technet.microsoft.com/Forums/en-US/7e597b44-2586-4063-b6d0-cec48a7c11c7/sccm-2012-task-sequence-failure-0x8007000e?forum=configmanagerosd
There's seems to be no consensus on this.
Is SCCM 2012 clever enough to - when the task sequence is first started - to download ONLY the updates (policies) it detects as NOT present in the OS image...
or
Will it simply try to download policies for ALL items deployed to it, whether the updates are present in the OS image or not?
I will be disappointed if SCCM 2012 SP1 CU2 isn't clever enough to only download policies at build time for the apps, packages and updates it detects as needed.
I'd be grateful for some clarity on this.
Regards,
John, Glasgow.

Hi Jason
Thank you for replying, I appreciate it.
1) We currently have 15 or 16 software update groups for Office updates, dating back a month or two. The latest software update group contains all the patches in the previous software update groups plus the patches released on 10th June. Do you recommend
deleting all but the latest software update group?
2) I'm almost reluctant to ask this, but based on what you have advised, is it the case that when the task sequence executes, it will download policies for each update in each software update group regardless of whether it has already downloaded a policy
for an update in a previous software update group? So in effect it's downloading policies (for updates) it has already downloaded?
3) I'm not clear on why there would be no policy for an image; in Niall Brady's informative page on the 8007000E error, he writes the following:
"The reason it has run of space could be due to four possibilites: too many applications, too many Windows updates, too many Task Sequence steps, too many referenced packages'.
Can you shed some light on why there isn't a policy for an image?
Thanks again for replying,
John.

11gR2 RAC install fail when running root.sh script on second node

I get the errors:
ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
[main] [ 2012-04-10 16:44:12.564 EDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15072: command requires at least 2 regular failure groups, discovered only 0
ORA-15080: synchronous I/O operation to a disk failed
I have tried the fix solutions from metalink note, but did not fix issue
11GR2 GRID INFRASTRUCTURE INSTALLATION FAILS WHEN RUNNING ROOT.SH ON NODE 2 OF RAC USING ASMLIB [ID 1059847.1

Hi,
it looks like, that your "shared device" you are using is not really shared.
The second node does "create an ASM diskgroup" and create OCR and Voting disks. If this indeed would be a shared device, he should have recognized, that your disk is shared.
So as a result your VMware configuration must be wrong, and the disk you presented as shared disk is not really shared.
Which VMWare version did you use? It will not work correctly with the workstation or player edition, since shared disks are only really working with the server version.
If you indeed using the server, could you paste your vm configurations?
Furthermore I recommend using Virtual Box. There is a nice how-to:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Sebastian

Application express installation is failed while running apxdevrm.sql scrip

Hello Experts,
i am new to Oracle Application express. My installation is failed while running the script (apxdevrm.sql).
here is the command i ran as sysdba
@apexins xxxxx apex apex temp /i/
installation is exited with the following error :
REPORT:SYS> prompt Set Application ID...
Set Application ID...
REPORT:SYS>
REPORT:SYS> begin
2
3 -- SET APPLICATION ID
4 wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,4411);
5 wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
6 null;
7
8 end;
9 /
REPORT:SYS>
REPORT:SYS> --application/delete_application
REPORT:SYS>
REPORT:SYS> begin
2
3 -- Remove Application
4 wwv_flow_api.remove_flow(nvl(wwv_flow_application_install.get_application_id,4411));
5
6 end;
7 /
begin
ERROR at line 1:
ORA-20001: API operation includes calls that are incompatible with the current runtime.
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 32
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 247
ORA-06512: at line 4
here is my database version :
REPORT:SYS> select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
OS version :
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.6 (Tikanga)
any one had this issue in the past?
your help is greatly appreciated.
Edited by: 892564 on Oct 20, 2011 4:15 PM

Hello experts,
is there any best way to trouble shoot the error which i got?
Thanks
!# Pavan

Operations manager failed to run a wmi query for wmi events (0x800706ba)

Hi everyone,
I've been working on this issue for a while and I am still no closer to finding out what the problem is. If anybody can offer any other advice or things to check, I'm all ears.
I'm running SCOM 2012 R2 with UR2, and the Cluster Management Pack v6.0.7063.0
My problem is on one particular batch of cluster servers where I am getting the following error.
Name: Operations Manager failed to run a WMI query for WMI events
Alert Description:
Module was unable to enumerate the WMI data
Error: 0x800706ba
Details: The RPC server is unavailable
Workflow name: Microsoft.Windows.Cluster.Node.StateMonitoring
Instance Name: servername.domain.local
Instance ID: {instance_id}
Management group: SCOM_Management_Grp_Name
I am getting this alert regardless of whether I run the Windows Cluster Action Account as Local System, or as a domain user with full local admin privileges on all the cluster nodes.
When looking at the management pack and the workflow in particular (Microsoft.Windows.Cluster.Node.StateMonitoring), I can see that it's trying to access
MSCluster_Node in the root\MSCLUSTER WMI namespace.
This is the workflow for your information...
<UnitMonitor> ID="Microsoft.Windows.Cluster.Node.StateMonitoring" Accessibility="Public" Enabled="onEssentialMonitoring" Target="ClusLibrary!Microsoft.Windows.Cluster.Node" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="ClusLibrary!Microsoft.Windows.Cluster.CheckState" ConfirmDelivery="false">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="Microsoft.Windows.Cluster.Node.StateMonitoring.AlertMessage">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</AlertParameter1>
<AlertParameter2>$Target/Property[Type="ClusLibrary!Microsoft.Windows.Cluster.Node"]/ClusterName$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="Success" MonitorTypeStateID="Online" HealthState="Success" />
<OperationalState ID="Warning" MonitorTypeStateID="Partial" HealthState="Warning" />
<OperationalState ID="Error" MonitorTypeStateID="NotOnline" HealthState="Error" />
</OperationalStates>
<Configuration>
<ClusterObjectName>$Target/Property[Type='ClusLibrary!Microsoft.Windows.Cluster.Node']/NodeName$</ClusterObjectName>
<PollInterval>60</PollInterval>
<ClusterObjectClass>MSCLUSTER_Node</ClusterObjectClass>
<OnlineExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</OnlineExpression>
<OnlineExpressionOnDemand>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</OnlineExpressionOnDemand>
<PartialExpression>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</PartialExpression>
<PartialExpressionOnDemand>
<Or>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</Or>
</PartialExpressionOnDemand>
<NotOnlineExpression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='EventNewState']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</NotOnlineExpression>
<NotOnlineExpressionOnDemand>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">0</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">2</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='State']</XPathQuery>
</ValueExpression>
<Operator>NotEqual</Operator>
<ValueExpression>
<Value Type="String">3</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</NotOnlineExpressionOnDemand>
<WMIFields>Name, State</WMIFields>
</Configuration>
</UnitMonitor>
I can confirm that I am able to browse the MSCluster_Node class locally, as well as remotely using WMIEXPLORER and WBEMTEST,
however it only works when I set the Authentication Level to
Packet Privacy. If I do not select Packet Privacy, a WMI event log error 5605 is logged on the remote servers application log that says...
The root\mscluster namespace is marked with the RequiresEncryption flag. Access to this namespace might be denied if the script or application does not have the appropriate authentication level. Change the authentication level to Pkt_Privacy
and run the script or application again.
I can confirm that all firewalls are turned off, and there are no firewalls between the management servers and the agents in question. AV exclusions have been done and appear to be in place. The nodes are all Windows 2008 R2 with SP1. As
far as I can tell there is plenty of memory available on each of the nodes in question (50%+) of RAM is available.
If I manually run the "Discover the Windows Server 2008 R2 Cluster Components" task in the Cluster Service State section of the management pack in the Monitoring Pane in the console, on the nodes in question - the discovery runs successfully.
Does anybody have any other ideas or suggestions I could try?
Many thanks in advance,
Noel.
http://www.dreamension.net

Hi,
Common causes of RPC errors include:
Errors resolving a DNS or NetBIOS name.
The RPC service or related services may not be running.
Problems with network connectivity.
File and printer sharing is not enabled.
For more information, please review the link below:
Windows Server Troubleshooting: "The RPC server is unavailable"
http://social.technet.microsoft.com/wiki/contents/articles/4494.windows-server-troubleshooting-the-rpc-server-is-unavailable.aspx#Identify
Troubleshooting RPC Errors
http://technet.microsoft.com/en-us/magazine/2007.07.howitworks.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Failed to run X within VirtualBox.

Similar Messages

Maybe you are looking for