Failed to send start signal for complete cluster, SLD may still be stopped.

Hello,
I am trying to create technical systems in the SLD on the portal (http://host:port/sld). It prompts me to start the SLD server by going to Administration.
When I click the button "Start Server" under Administration, I get this following error message:
"Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes."
Can you please tell me what has to be done to successfully start the SLD server so that I can go ahead and add technical systems.
Thanks
Srinivas

Hi Siddarth,
I checked MMC. There is only one instance running.
Here is the structure in MMC.
Database
Instance 0
Instance 1
Instances are green and running.
Here is log on the server:
#28 12/12/2008 07:43:44.413 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.start.StartDirector: SLD start failure, unable to activate the SLD CIMOM. Check the log of the persistence medium for any errors. If the error is reproducible, please send a message to SAP. More...
#27 12/12/2008 07:43:44.397 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.objmgr.core.TransactionContainerChangeBuffer: Storing changes to cache failed. Please restart the application to reinitialize the cache.(Error: CIM_ERR_FAILED: Failed to initialize cluster notification sender.) More...
#26 12/12/2008 07:43:44.382 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
#25 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.webui.CimIO: Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes.
#24 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
What could be the problem.

Similar Messages

Can you send a code for iTunes and have it still work

Can you send a code for iTunes and have it still work

Did you get this in an email from Apple? Are there instructions in the email?
Typically the way that you redeem a gift card is to go to either the app store or iTunes - go to the featured tab in the app store or the music tab in iTunes - swipe to the bottom of the screen. Tap on Reedem at the bottom and go from there.
OK. I'm a little dense tonight. Now I get it. Like Meg said, you will know soon enough.
Message was edited by: Demo

HT1349 Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?

Problem: my iPhone 4S (1yr old) has started buzzing for no apparent reason. I cannot stop it or turn the thing off. The screen is black and does not respond to touch. Any suggestions?

Thanks, AM_Kidd, I had tried that before but I tried again and this time it WORKED!!!!
The buzzing stopped and I have the home screen up again.
Phew! It may be that it had been on charge for the last 30 mins.
Whatever. Again, many thanks.

Fail to install starter kit for IFRS in BFC

Hi
I am trying to install the starter kit for IFRS in BFC following the installation guide step by step.
But during the installation i receive an error message.
the steps that i followed are:
i started the data source in exclusive mode
i configured the network from the transfer vectors selection
i created a scan task
i executed the started kit for IFRS.exe selecting the appropriate folder.
Now when i am trying to run the scan task that i have created i don't receive any new tasks
and in the log file i am viewing the following errors:
Archive processing 20081006@162115
Error when scanning the C:\......\business object\........
and if i click on the error the follow message appears
the 0000.CUSTOMIZE address of the archive is different from the current site 0000.TOP
the same error message is repeated again and again for each archive.
i need some help to install the starter kit for IFRS
Thanks in advance
Stavros

Thank you very much for your valuable help.
Following your instructions I manage to set up the IFRS Kit. Unfortunately there is not specify anywhere in the manual that the first database must set up as child and not as top.
Reading much of the documents coming with the version I am using, there is nowhere analyze what is the top or child script and what exactly that script is helping it.
Because I am quite new for BFC there is any manual or somewhere I can find what exactly are the differences for child and top?
Have in mind that I will have couple of installations that they are going to report their own data by having topical databases and from the installation manual the Head office database should be set as TOP.
Thanks again for your help.
Best regards
Stavros
P.S Sorry for posting this question in a wrong forum

How to send trigger pulse for every 0.25 sec until user stops the task?

Hi All,
Iam using NI_DAQ PCI 6221 Card for the Data Acquisition.
Can any body please tell me how to send trigger pulse for every 0.25 sec until the user stop the task??
Please suggest me the methods I should use to meet this requirement.
Thanks In Advance,
Sindhu

Hi Sindhu,
Am I correct in thinking that you do not want to use your 6221 to output a digital pulse, but that you are getting a digital pulse from somewhere else that you want to use as a trigger for the analog input? And you will have more than one trigger? If this is the case, then it can be accomplished by doing a retriggerable operation. The way that this works is you use the counter on your board to generate the sample clock for your analog input because analog input cannot do retriggerable operations with its own sample clock. You can modify the example GenDigPulseTrainContinuous_DigStart that is in the same location as the example I referenced before to be retriggerable by using the property DAQmxSetStartTrigRetriggerable.
After doing that and testing to make sure that it works, you can setup an analog input task like the example ContAcqVoltageSamples_IntClk but specify the source of the sample clock to be the internal output of the counter you used in the counter portion of your program. If you need help with the terminal names (You will need to use Ctr0InternalOutput for example), you can reference the NI-DAQmx C Reference Help at Start >> Programs >> National Instruments >> NI-DAQ. After doing this, you will acquire the same number of samples as the number of pulses you choose to generate in the counter portion of your code every time a trigger is received.
Also, I have come across an example that does retriggerable analog input using the counter as a sample clock in C++. Either by using this example or modifying the shipping examples as I stated above you should be able to achieve what you are trying to do.
Let us know if you have any questions.
Thanks,
Laura

Any suggestions? - optical connection fails to send any signal to hi fi

Analogue out of the airport express ran fine, & then I thought I'd do much better with an optical cable into my cambridge dacmagic!? No signal detected by the dac at all!! I've been checking that the toslink cable works (it does) etc, & had narrowed it down to either the mini-toslink adaptor or optical out of the AE as the source of difficulty. Any ideas?
Thanks, Jim, Melbourne.

I would recommend you to please get in touch with Authorized distributors they will help you.
http://www.xilinx.com/about/contact/authorized-distributors.html

My ipod touch 5th generation keeps wifi signal for 10-30 minutes and then just stops working.

I've had my ipod for about a month now and it worked fine up until this week.
This week I noticed probelms with the wifi. I would be just on facebook or browsing the web and the wifi would just stop working. Every time I turned wifi off and the on again it would give me about 5-10 more minutes of wifi before I had to do it again. I've never expeiranced this with my other 4th generation or 3rd generation ipod touches. The wifi itself is not the probelm because it works just fine on my laptop. Today I updated my software and the probelm was not resolved.
I need help sould I got to the Apple store and have them check it out?

Does the iPod have the problem with other networks?
Do other devices work OK?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- DOes the router have the latest firmware?
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Scom agent failed to send perf data to scom

Hi all,
Been seeing this from one of our exchange mailbox servers once a day,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Alert: Scom agent failed to send perf data to SCOM. Issues may be occurring that are not being properly reported.
Source: Server - XXXX- XXXX
Path: XXX.XX.XX.XXX;<server name> - XXXX
Last modified by: System
Last modified time: 11/5/2014 (MM/DD/YY)
Alert Description: In PerfDataSource, querying for Global Snapshot failed with error 'The size limit for this request was exceeded.
One or more workflows were affected by this.
Workflow name: _cc4f2e1a_817c_44d9_b527_4216676b3bfd_
Instance name: Database Copy (log) Logical Disk Space (F:) - Server (Mailbox)
instance ID: {2FB68006-BD4A-A39C-5D40-0588077643F7}
EventSourceName: Health Service Modules.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I've checked my event logs, it seems to be taking global snapshot quite ok frequently each day but one would fail and cause this error.
I am wondering what would cause this and if anyone has experienced this before and resolved it.
regards,

For this issue, You can refer below link
http://technet.microsoft.com/en-us/library/hh361436%28v=exchg.140%29.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Trying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.

rying to get Photoshop CS4 functional with Mavericks and an Epson 3880 printer. CS4 fails to send a file to the print queue. Have reinstalled the Epson 3880 driver for Mavericks. All looks good but no file is sent.
Does anyone know how to fix this?

What EXACT version of Photoshop CS4 are you running? You should be on Photoshop CS4 v 11.0.2.
Also run Apple's software update to see whether it offers you the latest Epson update:
Printer Driver v9.33
Epson Stylus Pro 3880, Drivers & Downloads - Technical Support - Epson America, Inc.
MOST IMPORTANTLY: have Photoshop re-create its own Preferences:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (Bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by manually deleting the Adobe Photoshop CS6 Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
NEW Video! Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here:
How to Reset Photoshop CS6’s Preferences File | The Complete Picture with Julieanne Kost | Adobe TV
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Why do not Apple send a fix for all fail´s / slow mac`s afther upgrade to Yosemite

I have upgrade 2 of my Macbook air 11" models. Both have major slow functionality in allmost every programs. slow mail, safari, pages. Allmost nothing of the funksjonalitys can being uses in numbers. Slow functionality when jumping between programs. Allover i have BIG problems with mac for my first time. And why do not Apple send a fix for all fails there is after upgrading to Yosemite. When thousand of users have the same problem with major slow mac`s.
Here is a test for my mac.
EtreCheck version: 2.1 (101)
Report generated 4. desember 2014 kl. 22.48.33 CET
Hardware Information: ℹ️
MacBook Air (Verified)
MacBook Air - model: MacBookAir6,1
1 1.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1366 x 768
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:12:8
Disk Information: ℹ️
APPLE SSD SM0512F disk0 : (500,28 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 496.30 GB (371.41 GB free)
Core Storage: disk0s2 499.42 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[not loaded] com.parallels.virtualsound (1.0 18 - SDK 10.6) [Support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Support]
/Library/Application Support/Kaspersky Lab/KAV/Bases
[not loaded] com.kaspersky.kext.kimul.38 (38) [Support]
/Library/Extensions
[loaded] com.silex.driver.sxuptp (1.10.9 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.61 - SDK 10.6) [Support]
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) [Support]
[not loaded] com.kaspersky.kext.klif (2.2.1d19) [Support]
[not loaded] com.zg.driver.ZGUSBCDCACMData (1.5) [Support]
[not loaded] com.zg.driver.ZGUSBMassStorageFilter (1.5) [Support]
[not loaded] com.zg.driver.cdc_ecm_qmi (1.9) [Support]
[not loaded] com.zg.driver.cdc_usb_bus (1.9) [Support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.61 - SDK 10.6) [Support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.61 - SDK 10.5) [Support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.61 - SDK 10.6) [Support]
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[failed] com.kaspersky.kav.plist [Support] [Details]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Support]
[failed] com.parallels.mobile.kextloader.launchdaemon.plist [Support] [Details]
User Launch Agents: ℹ️
[running] ca.indev.MailTagsHelper.agent.plist [Support]
[loaded] com.facebook.videochat.[redacted].plist [Support]
[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[loaded] com.parallels.mobile.startgui.launchagent.plist [Support]
User Login Items: ℹ️
iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
fuspredownloader ProgramHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
nplastpass: Version: 3.1.61 [Support]
JavaPlugin2_NPAPI: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
userinternetplugins ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
Facebook Cleaner
Pin It Button
LastPass
ResizeMe
OpenIE
3rd Party Preference Panes: ℹ️
Cineform [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 496.30 GB Disk used: 124.90 GB
Destinations:
Data [Network]
Total size: 3.00 TB
Total number of backups: 65
Oldest backup: 2013-08-15 20:20:51 +0000
Last backup: 2014-12-04 17:20:31 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 496.30 GB X 3)
Top Processes by CPU: ℹ️
     4% WindowServer
     1% fontd
     1% cloudd
     0% Safari
     0% launchd
Top Processes by Memory: ℹ️
369 MB com.apple.WebKit.WebContent
155 MB Safari
103 MB Feedback Assistant
86 MB Finder
69 MB mds_stores
Virtual Memory Information: ℹ️
4.52 GB Free RAM
2.60 GB Active RAM
652 MB Inactive RAM
820 MB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 4, 2014, 10:37:00 PM Self test - passed

[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
Your machine is slow because you loaded a bunch of third party junk on it.

OAS 4.0.8 fail to send complete HTML from PL/SQL sp

OAS 4.0.8 may fail to send complete HTML response from the PL/SQL cartridge sometimes. It also varies with different browsers or even with different versions of the same browser. Sometimes it works OK, sometimes the HTML was broken. I tried to figure out the reason, but only realized that the proxy server might cause the problem. As I disabled the proxy server setting on my browser at school(the server is on campus), it worked. However, as I did the same thing at home, it did not work. I am confused what the problem is. That trouble never happened for the previous version OAS 3.0.1. Anybody can help me with that. The ORACLE staff in Taiwan did not come out with the solutions!

OAS 4.0.8 may fail to send complete HTML response from the PL/SQL cartridge sometimes. It also varies with different browsers or even with different versions of the same browser. Sometimes it works OK, sometimes the HTML was broken. I tried to figure out the reason, but only realized that the proxy server might cause the problem. As I disabled the proxy server setting on my browser at school(the server is on campus), it worked. However, as I did the same thing at home, it did not work. I am confused what the problem is. That trouble never happened for the previous version OAS 3.0.1. Anybody can help me with that. The ORACLE staff in Taiwan did not come out with the solutions!

File.upload on Air SDK for iOS devices failed to send http request to server.

I am trying to use ActionScript's File.upload to upload a file on Air SDK for iOS8 environment, but the File.upload does not work properly. No handler about the file upload is executed after File.upload is invoked, and no exception is caught. When I check the network traffic of the server side, I found that no http request even hit the server after File.upload is executed. The code snippet here is very simple.
private var file:File;
private var dir:File;
//This method is executed to create a file and upload it when the Upload Button is pressed.
protected function OnUploadButtonPressed(event:MouseEvent):void{
var str:String = 'This is test';
var imageBytes:ByteArray = new ByteArray();
for ( var i:int = 0; i < str.length; i++ ) {
imageBytes.writeByte( str.charCodeAt(i) );
try{
dir = File.applicationStorageDirectory
var now:Date = new Date();
var filename:String = "test" + now.seconds + now.milliseconds + ".txt";
file = dir.resolvePath( filename );
var stream:FileStream = new FileStream();
stream.open( file, FileMode.WRITE );
stream.writeBytes( imageBytes );
stream.close();
file.addEventListener( Event.COMPLETE, uploadComplete );
file.addEventListener( IOErrorEvent.IO_ERROR, ioError );
file.addEventListener( SecurityErrorEvent.SECURITY_ERROR, securityError );
file.addEventListener(ErrorEvent.ERROR, someError);
file.addEventListener(ProgressEvent.PROGRESS, onProgress);
file.upload( new URLRequest("http://10.60.99.31/MyPath/fileUploadTest.do"));//This line does not work. No handler is executed. No http request hit the server side.
} catch( e:Error ) {
trace( e );
//Complete Handler
private function uploadComplete( event:Event ):void
trace( "Upload successful." );
//IOError handler
private function ioError( error:IOErrorEvent ):void
trace( "Upload failed: " + error.text );
//SecurityError handler
private function securityError(error:SecurityErrorEvent):void{
trace( "Security error:" + error.text );
//Other handler
private function someError(error:ErrorEvent):void{
trace("some error" + error.text);
//Progress handler
private function onProgress(event:ProgressEvent):void{
trace("progressHandler");
When executed on Air Simulator, it works fine as expected, and the file is successfully uploaded to the server. But When executed on iOS devices(in my case, iPad), as I explain early, no handler about the file upload is executed, and no the http request even hit the server. So I think the problem may be in the client side. It seems that the Air SDK for iOS just failed to send the http request for some reason.
To make my problem more clear, I list my environment below:
Development Environment: Windows7 (64bit) / Mac os 10.9.4 (Tested on OS platforms.)
IDE: Flash Builder 4.7
Air SDK: 3.8 / 16.0.0 (After I updated to the lastest Air SDK 16.0.0 , the problem still exists.)
Application Server: Tomcat7 + Spring
Target OS: iOS 8
I have been struggling for this for days. So I really appreciate it if anyone has any idea about this.
Thanks in advance.

Hi bluewindice ,
As you have quoted ( ActionScript's File.upload does not work on Air SDK for iOS devices ) , this issue has been replicated at our end, and our team will be working on it.
Thanks,
Tushar

DB Instance fails to automatically start on cluster reboot

Hello -
I cannot get the instance on node1 to automatically start on a reboot. It starts manually, and it starts automatically when the other node is rebooted. I also unregistered it, and re-registered the instance.
Here is the errors from $ORA_CRS_HOME/log/ctolinuxpoc01/crsd/crsd.log:
2009-02-03 15:52:08.496: [ CRSAPP][1494882624] StartResource error for ora.ractest.ractest1.inst error code = 1
2009-02-03 15:52:10.098: [ CRSRES][1494882624] Start of `ora.ractest.ractest1.inst` on member `ctolinuxpoc01` failed.
I do see for the DB instance log these errors:
<txt>ASMB (ospid: 4422): terminating the instance due to error 15064
</txt>
</msg>
<msg time='2009-02-03T15:43:25.399-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>Errors in file /opt/app/oracle/product/11.1.0/diag/rdbms/ractest/ractest1/trace/ractest1_diag_4149.trc:
ORA-27508: IPC error sending a message
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1
</txt>
</msg>
<msg time='2009-02-03T15:43:25.399-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>System state dump is made for local instance
</txt>
</msg>
<msg time='2009-02-03T15:43:25.399-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>System State dumped to trace file /opt/app/oracle/product/11.1.0/diag/rdbms/ractest/ractest1/trace/ractest1_diag_4149.trc
</txt>
</msg>
<msg time='2009-02-03T15:43:26.589-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>Trace dumping is performing id=[cdmp_20090203154325]
</txt>
</msg>
<msg time='2009-02-03T15:43:26.727-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4422'>
<txt>Instance terminated by ASMB, pid = 4422
</txt>
</msg>
The ASM instance was automatically started, and I am able to manually start the instance without any problems.
Any help is appreciated!
Thanks,

ASMB (ospid: 4422): terminating the instance due to error 15064oerr ORA 15064
15064, 00000, "communication failure with ASM instance"
// *Cause: There was a failure to communicate with the ASM instance, most
// likely because the connection went down.
// *Action: Check the accompanying error messages for more information on the
// reason for the failure. Note that database instances will always
// return this error when the ASM instance is terminated abnormally.
ORA-27508: IPC error sending a message
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1What is the output from following command?:
/sbin/sysctl -a|grep net.core|egrep 'wmem|rmem'

I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! Please help!

Question
I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! It's almost as if something is blocking it ffrom completing the process. Please help

Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

Hello I have an adobe CC id (removed) and I'am using the trial version, please send me a serial number for complete registration

Hello I have an adobe CC id [removed] and I'am using the trial version, please send me a serial number for complete registration
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Failed to send start signal for complete cluster, SLD may still be stopped.

Similar Messages

Maybe you are looking for