Failed to start Apply cpupower configuration

cpupower.service - Apply cpupower configuration
Loaded: loaded (/usr/lib/systemd/system/cpupower.service; enabled)
Active: failed (Result: exit-code) since Thu 2014-03-06 22:31:20 CET; 3min 6s ago
Main PID: 497 (code=exited, status=1/FAILURE)
Mar 06 22:31:20 Jack-PC systemd[1]: cpupower.service: main process exited, code=exited, status=1/FAILURE
Mar 06 22:31:20 Jack-PC systemd[1]: Failed to start Apply cpupower configuration.
Mar 06 22:31:20 Jack-PC systemd[1]: Unit cpupower.service entered failed state.
last time I boot the laptop, anything was fine. I dont know what happens
do you want any other logs? pls tell me
any help is apprecated
Last edited by gundamfj (2014-03-06 20:44:13)

There's plenty of info about this one the forums if you do a search. The gist: intel_pstate replaces acpi_cpufreq. It doesn't use the usual governors, it has two internal ones - powersave and performance. There's no reason to not use powersave all the time. If you want to learn more, like I said, just do a search.

Similar Messages

TS3212 Application has failed to start because application configuration is incorrect

Hello
Am hoping for some help please if possible, I have just downloaded the latest version of I-Tunes, when I double click on the .exe to install I get the following message;
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
I've tried searching forums and have seen similar posts - one suggesting it may be a problem with a dll file but gave no further details and another post that suggested it could be the .net framework which I downloaded a fix for from Microsoft but this has not worked unfortunately.
I am running Windows XP Professional Service Pack 3
Any help would be gratefully appreciated
Thank you
Richard

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99596)

This application failed to start because it's side-by-side configuration is incorrect....

This is a redirected question from
here
While trying to run YouCam.exe, i encountered the error message,
"The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail. "
I then searched the forums and installed a slew of updates that mostly VC++ Redistritutable 64-Bit version, DotNetFix etc etc but it still did not work.
I then ran 'Event Viewer' and pulled out the error logs for the YouCam program.
"Activation context generation failed for "C:\Program Files\CyberLink\YouCam\YouCam.exe.Manifest". Dependent Assembly Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0" could not be found.
Please use sxstrace.exe for detailed diagnosis."
I am using a Fujitsu SH760 laptop which is running a Win7 64-bit Enterprise OS.
Note that I do not have the recovery disk.
Please assist and if you require further information, i will try to give it asap.
Thank You.

I ran sxstrace.exe and here is the log file i obtained. Details as follows,
=================
Begin Activation Context Generation.
Input Parameter:
   Flags = 0
   ProcessorArchitecture = Wow32
   CultureFallBacks = en-US;en
   ManifestPath = C:\Program Files (x86)\CyberLink\YouCam\YouCam.exe.Manifest
   AssemblyDirectory = C:\Program Files (x86)\CyberLink\YouCam\
   Application Config File =
INFO: Parsing Manifest File C:\Program Files (x86)\CyberLink\YouCam\YouCam.exe.Manifest.
   INFO: Manifest Definition Identity is YouCam,processorArchitecture="X86",type="win32",version="3.0.1104.3278".
   INFO: Reference: Kanten.X,type="win32",version="1.0.0.0"
   INFO: Reference: Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0"
   INFO: Reference: Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0"
INFO: Resolving reference Kanten.X,type="win32",version="1.0.0.0".
   INFO: Resolving reference for ProcessorArchitecture Kanten.X,type="win32",version="1.0.0.0".
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Kanten.X.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Kanten.X.MANIFEST.
               INFO: Manifest found at C:\Program Files (x86)\CyberLink\YouCam\Kanten.X.MANIFEST.
           INFO: End assembly probing.
INFO: Resolving reference Kanten.X.mui,language="*",type="win32",version="1.0.0.0".
   INFO: Resolving reference for ProcessorArchitecture Kanten.X.mui,language="*",type="win32",version="1.0.0.0".
       INFO: Resolving reference for culture en-US.
           INFO: Applying Binding Policy.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Did not find manifest for culture en-US.
           INFO: End assembly probing.
       INFO: Resolving reference for culture en.
           INFO: Applying Binding Policy.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Did not find manifest for culture en.
           INFO: End assembly probing.
INFO: Resolving reference Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
   INFO: Resolving reference for ProcessorArchitecture WOW64.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.DLL.
               INFO: Did not find manifest for culture Neutral.
           INFO: End assembly probing.
   INFO: Resolving reference for ProcessorArchitecture x86.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: Find publisher policy at C:\Windows\WinSxS\manifests\x86_policy.8.0.microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_516d712b0f495a45.manifest
               INFO: Publisher Policy redirected assembly version.
               INFO: Post policy assembly identity is Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4940".
           INFO: Begin assembly probing.
               INFO: Attempt to probe manifest at C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc.manifest.
               INFO: Manifest found at C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_d08cc06a442b34fc.manifest.
           INFO: End assembly probing.
INFO: Resolving reference Microsoft.VC80.CRT.mui,language="*",processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4940".
   INFO: Resolving reference for ProcessorArchitecture WOW64.
       INFO: Resolving reference for culture en-US.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en-US.
           INFO: End assembly probing.
       INFO: Resolving reference for culture en.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en.
           INFO: End assembly probing.
   INFO: Resolving reference for ProcessorArchitecture x86.
       INFO: Resolving reference for culture en-US.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en-US_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en-US.
           INFO: End assembly probing.
       INFO: Resolving reference for culture en.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.CRT.mui\8.0.50727.4940_en_1fc8b3b9a1e18e3b\Microsoft.VC80.CRT.mui.DLL.
               INFO: Did not find manifest for culture en.
           INFO: End assembly probing.
INFO: Resolving reference Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
   INFO: Resolving reference for ProcessorArchitecture WOW64.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFC\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.MFC.DLL.
               INFO: Did not find manifest for culture Neutral.
           INFO: End assembly probing.
   INFO: Resolving reference for ProcessorArchitecture x86.
       INFO: Resolving reference for culture Neutral.
           INFO: Applying Binding Policy.
               INFO: No publisher policy found.
               INFO: No binding policy redirect found.
           INFO: Begin assembly probing.
               INFO: Did not find the assembly in WinSxS.
               INFO: Attempt to probe manifest at C:\Windows\assembly\GAC_32\Microsoft.VC80.MFC\8.0.50608.0__1fc8b3b9a1e18e3b\Microsoft.VC80.MFC.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC.MANIFEST.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC\Microsoft.VC80.MFC.DLL.
               INFO: Attempt to probe manifest at C:\Program Files (x86)\CyberLink\YouCam\Microsoft.VC80.MFC\Microsoft.VC80.MFC.MANIFEST.
               INFO: Did not find manifest for culture Neutral.
           INFO: End assembly probing.
   ERROR: Cannot resolve reference Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50608.0".
ERROR: Activation Context generation failed.
End Activation Context Generation.

[SOLVED] Shorewall Universal configuration fails to start

I wanted to try shorewall.
I installed it with pacman:
$ pacman -Q shorewall
shorewall 4.6.1.2-1
I chose the Universal configuration, copying the corresponding files to /etc/shorewall.
When I try to start it by 'systemctl start shorewall.service', it fails with:
juin 25 17:54:24 arch64 systemd[1]: Starting Shorewall IPv4 firewall...
juin 25 17:54:24 arch64 shorewall[24056]: Compiling...
juin 25 17:54:24 arch64 shorewall[24056]: Processing /etc/shorewall/params ...
juin 25 17:54:24 arch64 shorewall[24056]: Processing /etc/shorewall/shorewall.conf...
juin 25 17:54:24 arch64 shorewall[24056]: Loading Modules...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/zones...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/interfaces...
juin 25 17:54:25 arch64 shorewall[24056]: Determining Hosts in Zones...
juin 25 17:54:25 arch64 shorewall[24056]: Locating Action Files...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/policy...
juin 25 17:54:25 arch64 shorewall[24056]: Running /etc/shorewall/initdone...
juin 25 17:54:25 arch64 shorewall[24056]: Adding rules for DHCP
juin 25 17:54:25 arch64 shorewall[24056]: Compiling TCP Flags filtering...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling Kernel Route Filtering...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling Martian Logging...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling MAC Filtration -- Phase 1...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/rules...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling /etc/shorewall/conntrack...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling MAC Filtration -- Phase 2...
juin 25 17:54:25 arch64 shorewall[24056]: Applying Policies...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling /usr/share/shorewall/action.Drop for chain Drop...
juin 25 17:54:25 arch64 shorewall[24056]: Compiling /usr/share/shorewall/action.Broadcast for chain Broadcast...
juin 25 17:54:25 arch64 shorewall[24056]: Generating Rule Matrix...
juin 25 17:54:25 arch64 shorewall[24056]: Optimizing Ruleset...
juin 25 17:54:25 arch64 shorewall[24056]: Can't use string ("filter") as a HASH ref while "strict refs" in use at /usr/share/shorewall/Chains.pm line 3486.
juin 25 17:54:25 arch64 shorewall[24056]: /bin/sh: /var/lib/shorewall/.start: Aucun fichier ou dossier de ce type
juin 25 17:54:25 arch64 shorewall[24056]: /bin/sh: /var/lib/shorewall/.start: Aucun fichier ou dossier de ce type
juin 25 17:54:25 arch64 systemd[1]: shorewall.service: main process exited, code=exited, status=127/n/a
juin 25 17:54:25 arch64 systemd[1]: Failed to start Shorewall IPv4 firewall.
juin 25 17:54:25 arch64 systemd[1]: Unit shorewall.service entered failed state.
I am unable to understand and fix this issue.
Can someone help me please?
Edit: changed the title of the thread.
Last edited by berbae (2014-08-22 12:33:58)

Since shorewall 4.6.2.5 the 'interfaces' file of the Universal configuration doesn't work anymore:
août 19 16:14:09 arch64 shorewall[572]: Shorewall configuration compiled to /var/lib/shorewall/.start
août 19 16:14:09 arch64 shorewall[572]: Starting Shorewall....
août 19 16:14:10 arch64 shorewall[572]: ERROR: No network interface available: Firewall state not changed
août 19 16:14:10 arch64 shorewall[572]: [112B blob data]
août 19 16:14:10 arch64 systemd[1]: shorewall.service: main process exited, code=exited, status=143/n/a
août 19 16:14:10 arch64 systemd[1]: Failed to start Shorewall IPv4 firewall.
août 19 16:14:10 arch64 systemd[1]: Unit shorewall.service entered failed state.
The compiling stage worked but the generated script didn't.
I identified the problem to be the usage of the '+' wildcard character in the 'physical' option value of the 'interfaces' file:
#ZONE INTERFACE OPTIONS
- lo ignore
net all dhcp,physical=+,routeback,optional
As I have only one interface 'eth0', I don't need to use a wildcard character and the 'all' value, so I changed the file to:
#ZONE INTERFACE OPTIONS
- lo ignore
net eth0 dhcp,routeback,optional
And the firewall works again after that change.
It's certainly a regression bug introduced in the new releases.
I changed the title of the thread
from:
Newly installed shorewall fails to start
to:
shorewall Universal configuration fails to start
Last edited by berbae (2014-08-22 14:59:46)

BOE XI R2 - Configuring RAS with Service user, RAS Fails to start...

Colleagues:
Where would kbase article c2018785 be found?
I am configuring my BOE XI R2 to use End-to-End SSO via IIS using this document from Business Objects:
Link: [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0]
In this document, you create a service user under which certain applications run, including the Report Application Server.
There is a specific note on page 6 in the doc which states:
The RAS server may fail to start under this new service account. If you experience this issue, follow the steps outlined in the following kbase:
Link: [http://support.businessobjects.com/library/kbase/articles/c2018785.asp]
Unfortunately, the link is out of date, and I have not found the article using the existing search tools.
I did use the -trace argument to the command line to start up the RAS service, and the output is follows:
Timestamp     ProcessID     ThreadID     Message
[Thu May 07 13:21:39 2009]     4448     4228     (.ashwin32service.cpp:165): trace message: RAS starting
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2039): CDTSApp::InitInstance(): In CDTSParameters::RUN
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2055): CDTSApp::InitInstance(): Starting server. Process Id=4448
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2062): CDTSApp::InitInstance(): setServerParameters() done
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2130): CDTSApp::InitInstance(): initLicenseLimit() returns 1
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3895): CDTSApp::loadServerOptions(): about to SaveToRegistryAsDefault
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3897): CDTSApp::loadServerOptions(): done SaveToRegistryAsDefault hr=-2147024891
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3916): CDTSApp::loadServerOptions(): error Access is denied.
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2134): CDTSApp::InitInstance(): loadServerOptions() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2194): CDTSApp::InitInstance(): getDataEngineName() returns C:TrouxBusiness Objectscommon3.5 incrpe32.dll
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2197): CDTSApp::InitInstance(): openEngine() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2292): CDTSApp::InitInstance(): preloadMSXML() done
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr begins...
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr trying to get Singleton SessionManager.
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize start
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize, start the cluster refresh thread
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2445): CDTSApp::InitInstance(): caught UNKNOWN EXCEPTION!!!
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2461): CDTSApp::InitInstance() returns 0
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:1039): CAgentMapMT::ShutDown - outstanding agents:
[Thu May 07 13:21:40 2009]     4448     4228     (.ashwin32service.cpp:329): trace message: RAS Exiting: return code = 0
In the Windows event viewer, this error is echoed:
Failed to load Report Application Server settings from the system registry.
Detailed Message: Access is denied.
It seems my service account needs a certain permission to be able to load and read the registry for this application, and I'm sure this permission is discussed in the missing kbase article.
Could you please let me know what permission is required for this user on the OS? This is Win2003 x64 SP2.
Thanks, and have a good day

Hi,
if this a permissions problem then just start +regedit*, go to
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
select it, press the right mouse button and choose Permissions. Press the advanced button and assign your service account with full control at this point of the registry. Do not forget to select the +Replace Permissions Entries on all child objects ... + option.
You can also take a look at Notes 1199630 and 1201489 (this one is for CR 10 but it may be worth it to follow the instructions there) ( [https://service.sap.com/notes])
Regards,
Stratos

What happened? After this morning Firefox's update, I couldn't get into Firefox but got this message, "The application failed to start because it's side-by-side configuration is incorrect.

This morning I went to go into Firefox, a message came up stating it was updating. After the update, Firefox didn't open, so I clicked on the icon and got this message. C:\Program Files (x86) Mozilla Fire\firefox.exe. The application has failed to start because its side-by-side configuration is incorrect. I tried removing & re-installing and I even try the Window's restoration point of a couple days back and I still get the message. Has anyone had or have this problem?

You can click the link in my above post if you haven't done that yet.
*https://support.mozilla.org/questions/910134
That SxS error seems to be caused by a corrupted Visual C installation that requires some DLL files to be reinstalled.
*http://www.vistax64.com/software/245768-side-side-configuration-incorrect.html

When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards.

The application has failed to start because it's side-by-side configuration is incorrect. Please see

When opening preimere pro cs5.5 i get this:
the application has failed to start because it's side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail

Moving this discussion to the Premiere Pro CS5 & CS5.5 forum.

OBIEE 10g Installation error "The application has failed to start because its side-by-side configuration is incorrect"

Hi,
I did installation of OBIEE10g on windows server 2008r2 which is placed on VM ware, Installation completed successfully. but while starting the BI services or opening the administration tool it is showing error as below
"The application has failed to start because its side-by-side configuration is incorrect.Please see application event log or use the command line sxtrace.exe tool for more detail."
Please guide me any suggestions.
Thanks in advance
Regards,
Satya

check these Error&#58; The application has failed to start because the side by - Microsoft Community https://forums.oracle.com/message/10578756
https://forums.oracle.com/thread/958782
Resolving Side-by-Side Configuration Issues - OJ's perspective

CS6 says "The application has failed to start because its side-by-side configuration is incorrect..."?

CS6 won't open--whenever I try to open a CS6 application, a windows pops up and says "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." This occurs for every single CS6 program (PS, Flash, etc.) except Illustrator. Illustrator is the only one that will open.
I have Windows 8. I've had CS6 for about half a year and this is the first time this has happened.

Did you ever find resolution?

The application has failed to start because side by side configuration is incorrect

I am getting an error when I launch Premier Pro that says, "The application has failed to start because side by side configuration is incorrect." I have the Production Premium Suite and all the programs are running fine except for Premier Pro
Message was edited by: Kevin Monahan
Reason: Title was too long

Hi Kevin,
Thanks for the reply. I tried that yesterday, it din't work and actually caused the same error for my other Adobe software (eg Flash, Illustrator, etc.) I had to do a system restore to get things back working. All my other programs are fine except for Premier Pro.
I updated my all my MS Visual C++, still same problem. I also tried this - How To Fix Side-By-Side Configuration Error Step By Step (Windows 7) - YouTube
Still getting the same error Premier Pro.

"failed to start... side-by-side configuration is incorrect'

Running Vista Ultimate 32-bit. When I try to start DW CS4 or
Fireworks CS4 I get the following message:
"The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log
for more detail."
Checking the event log, the entry shows this:
"Activation context generation failed for "E:\Adobe\Adobe
Dreamweaver CS4\Dreamweaver.exe". Dependent Assembly
Microsoft.VC80.MFC,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="wi n32",version="8.0.50727.762"
could not be found. Please use sxstrace.exe for detailed
diagnosis."
I found a couple of KB articles, one of which suggested
installing the VC++2005 runtime, which I did, and the other the
VC++2008 runtime, which I also did. No joy.
Oddly enough, all of the non-Web-related apps in Design
Premium that I've tested are working. I can launch PS, AI, ID,
Bridge, Acrobat Pro, etc. But DW, Fireworks, and Flash Pro won't
launch.
I've Googled this, to no avail. When I try to run a forum
search on the topic I get a server error asking me to contact the
site admin. Right.
Anybody got any ideas?
cheers,
scott

Thanx man, you are the best!
I mistakenly found an easier solution to this problem.
I had exactly the same problem with DW. I actually solved
this issue by mistake, but without reading your post I would'nt
have known it's possible!
Here's what happened:
With no connection to this issue I downloaded and installed
Windows Live Messenger, and in the installation info I see it
includes the VS installation! Since you said re-installing VS
solved your problem, I uninstalled DW and then allowed the
Messenger installation to continue - and in the next time I
installed DW it works perfectly!
So I guess you don't need to uninstall the VS, only install a
new version of it.
Tanx again!

Failed to start workflow. The workflow cannot access the item that it has been applied to.

I have a quick question for you and it would be great if you can answer me on this.
I'm working through SharePoint Workflow issue (developed using Nintex) that started recently where people are getting workflow error and I don't see issues if I submit it myself. Current error. - "Failed to start workflow. The workflow cannot access
the item that it has been applied to."
I haven't made any major changes to Workflow except for changing email notification content and publishing it. My question is, do I need to publish the rest of the workflows too that are associated to the list after I publish changes of one workflow? Looks
like users have required permissions to submit the form. Please let me know how to get rid of this error.
smith

Hi Smithspd,
According to your description, my understanding is that your users got a workflow error, and the workflow is created by Nintex.
For SharePoint Designer workflow, once we do any change in a workflow, we need to re-publish the workflow.
For your issue, I suggest you re-publish the workflow, compare the result.
In addition, as your workflow is created by Nintex and this forum is for SharePoint Designer, I suggest you ask Nintex support or forum for better help. Thanks for your understanding.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Cluster group on node B (app1) failed to start after applied win2003 SP2

Hi,
i followed microsoft kb174799 to apply SP2 on both ms-cluster nodes namely DB/APP1. SAP-R/3 cluster group on node B (APP1) failed to start after i did step 13
Thanks & Regards,
Kelvin

Hello,
Did you follow the procedures from note 985137 to apply the SP2
Please check procedure in this note.
985137 Service Pack Installation for SQL Server 2005
regards,
John Feely

EPM 11.1.2 - epmsystem Configuration Manager service fails to start

OracleEpmSystemc_oracle_middleware_user_projects_epmsystem1ConfigurationManager fails to start. I do not know how I am getting affected because everything else works fine. I have Essbase , Studio, Planning, EAS installed and all of them work fine. Do not know why this service fails. This is a fresh install of EPM 11.1.2 on windows 2003.
The Event Viewer says "The OracleEpmSystemc_oracle_middleware_user_projects_epmsystem1ConfigurationManager service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion. "
Thanks
Edited by: 823489 on Dec 24, 2010 6:25 AM

Hi,
have you found a fix for this ?
I'm getting the same error.
Thanks,
Cyril

Failed to start Apply cpupower configuration

Similar Messages

Maybe you are looking for