Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
It seems to be considering these items as removable media?
DPM 2012, SP1, version 4.1.3313.0
Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
Affected area: skutter.pmuk.net
Occurred since: 11/01/2013 09:04:43
Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
, atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
, firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
,firebird.pmuk.net_HADPCLQuality , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office ,firebird.pmuk.net_OMPM
, firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8 ,firebird.pmuk.net_Spares
,firebird.pmuk.net_test ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$ ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON ,legion.pmuk.net_SYSVOL
, nemesis.pmuk.net_KEvin ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$ ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
, valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
Any Ideas? backups are OK, recovery points/sync's etc.
Mark.

I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
In DPM I disabled EUR
In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
Delete all of the mappings within the container
In DPM enable EUR
In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
Related article on ADSI Edit and DPM -
http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
I hope this helps
JD Young

Similar Messages

DPM 2012 Failed to update permissions used in end-user recovery

Hello everyone,
I'm going to try the clearest way possible to describe the problem.
Our test server is Windows Server 2012 with DPM 2012 SP1 CU2 (BKP-SRV01) with a Remote SQL server 2012 (PBASC)
I protected a share folder on a DC on Windows Server 2008 R2 (PAD)
When I activate End-User Recovery I get a warning in the monitor tab that say this
Failed to update permissions used for end-user recovery on pad. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in pad_PartageTest on the protected computer BKP-SRV01. Recycle Bin, System Volume Information folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details:
the end user recovery is working, but i do not know if it affect other things. I also get that message when i try to browse on the DPM server when creating a protection group
When I go see the DPM Server / File and Storage Services / Shares on Server Manager i get "Failed to retrieve folder permission" in the properties of the Protected server share.
I tried to search for almost 2 days without finding anything about that particular issue.
Is there a way (clean way) to fix the issue?
Thanks in advance for the help!

Closing for housekeeping.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
That's not very helpful. I've got the same issue :(
Comes up for servers where a protection group related to it errors out (recovery point failure usually).

DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.

All Im very new to Oracle DRM and Im trying to get the app setup on Windows server running SQL Server 2008. When I try to login to the Web Client I keep getting this error.
DRM-61026: Unable to create user session for the following reason: Login failed. Invalid user name or password.
Can you please help

This might be due to The 'Oracle Instance' path may not have been set to a path relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine) on the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
if this is the case then
1. Open the DRM Configuration Console.
2. Go to the Configuration > Host Machines > CSS > General tab of the DRM Configuration Utility.
3. Ensure that the path in 'Oracle Instance' has been set relative to the 'CSS Bridge Host' (i.e. the Foundation Services machine defined in 'CSS Bridge Host').
4. If corrections are made to 'Oracle Instance' then restart the DRM services to pick up the change.
Thanks,
~KKT~

Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid.

I'm stuck here trying to figure this error out.
2003 domain, 2012 hyper v core 3 nodes. (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid."
I restarted the host node that was listed in having the error then another node starts showing the errors.
I tried to follow this site: http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
Then this error shows up when doing the repair: there was an error repairing the active directory object for 'Cluster Name'
I looked at our domain controller and noticed I don't have access to local users and groups. I can access our other hvclust2008 (both clusters are same version 2012).
<image here>
I came upon this thread: http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
Now, I'm stuck on adding a managed service account (mas). I'm not sure if I'm way off track to fix this. Any advice? Thanks in advance!
<image here>

Thanks Elton,
I restarted 3 hosts after applying the hotfix. Then I did the steps below and got stuck on step 5. That is when I get the error (image above). There
was an error repairing the active directory object for 'Cluster Name'. For more data, see 'Information Details'.
To reset the password on the affected name resource, perform the following steps:
From Failover Cluster Manager, locate the name resource.
Right-click on the resource, and click Properties.
On the Policies tab, select If resource fails, do not restart, and then click OK.
Right-click on the resource, click More Actions, and then click Simulate Failure.
When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
After the name resource is online, right-click on the resource, and then click Properties.
On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
Thanks

Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advance

Hi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz

What r all the tables used for the following report

hai
what r all the tables used for the following report
report:
<b>
Report that displays all the late shipments in a particular period of time</b>
send important fields for this tables also
thanks in advance.

Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole

Could not save the document to the repository for the following reason

Hi,
Some of the Scheduled reports are getting failed because of the following Error.
Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
i have searched about this but no use no information on the same.
So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
Thanks in advance,

HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us

The process HOTFIX.exe has initiated the restart of computer "Computer_Name" on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found Reason Code: 0x2

I've had 5 machines the past two days, that have randomly restarted in the morning. All of my GPO's are configured to prevent reboots from Windows Updates. All 5 machines have up to date Anti-Virus, have ran a combofix with nothing found, and
have been forcefully rebooted at least once (most twice). I'm hoping to find the root cause, so I can prevent it from occurring on any other machines in our environment.
Also, sometimes on the seconds reboot the users see a:
The description for Event ID 1074 from source USER32 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
HOTFIX.exe
%Computer_Name%
No title for this reason could be found
0x2
restart
NT AUTHORITY\SYSTEM
The handle is invalid

Hi,
The Event ID 1074 from source USER32 is used to record a system shutdown or restart in order for the administrators of that system to have a better understanding on how often and for what reasons the computer is shutdown or restarted. The event contains
details about the process (the program) that performed this task, the computer that was affected and when applicable, the reason for the restart or shutdown.
The process known as Hotfix Installer belongs to software Microsoft SQL Setup or SQL HotFix Installer Engine by Microsoft.
Description: The file hotfix.exe is located in a subfolder of C:\. The file size on Windows 7/XP is 2,539,872 bytes.
The program has no visible window. Hotfix.exe is certified by a trustworthy company. Hotfix.exe is not a Windows core file. Hotfix.exe is able to monitor applications. Therefore the technical security rating is 36% dangerous.If hotfix.exe is located in a subfolder
of "C:\Documents and Settings", the security rating is 60% dangerous. The file size is 895,488 bytes (50% of all occurrences) or 564,736 bytes. There is no file information. The program has no visible window. It is not a Windows system file. Hotfix.exe is
able to record inputs and monitor
applications.
Also, I would like to suggest you refer to the link below to trace Windows 7 boot/shutdown/hibernate/standby/resume issues.
Trace Windows 7 boot/shutdown/hibernate/standby/resume issues:
http://www.msfn.org/board/topic/140247-trace-windows-7-bootshutdownhibernatestandbyresume-issues/
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy the information.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Affected area:_- Occurred since:_1/16/2014 5:04:48 PM Description:_The back up to tape job failed for the following reason: (ID 3311) _More information Detailed Errors_View Detailed Errors Recommended action:_Run backup to tape job again... Resolution:_To

D0025-SE-10911\MSSQLPOSMONITOR\Demo_DW (D0025-SE-10911.TB.NET)
The SQL Server 2008 database D0025-SE-10911\MSSQLPOSMONITOR\Demo_DW on D0025-SE-10911.TB.NET is not available. (ID 30164 Details: Internal error code: 0x80990D15)
To troubleshoot this issue, verify the following:
1) The database is online.
2) The database is not in a restoring state.
3) The database has not been deleted.
4) The database is accessible.
5) If the database was part of a mirroring session, either re-establish mirroring between the partner SQL Server databases or remove the database from protection and recreate the protection group for this database.
D0025-SE-10911\MSSQLPOSMONITOR\TATPOSTransaction (D0025-SE-10911.TB.NET)
The SQL Server 2008 database D0025-SE-10911\MSSQLPOSMONITOR\TATPOSTransaction on D0025-SE-10911.TB.NET is not available. (ID 30164 Details: Internal error code: 0x80990D15)
To troubleshoot this issue, verify the following:
1) The database is online.
2) The database is not in a restoring state.
3) The database has not been deleted.
4) The database is accessible.
5) If the database was part of a mirroring session, either re-establish mirroring between the partner SQL Server databases or remove the database from protection and recreate the protection group for this database.
D0025-SE-10911\MSSQLSYSCENTER\ReportServer$MSSQLSYSCENTER (D0025-SE-10911.TB.NET)
DPM cannot continue protection for SQL Server 2008 database D0025-SE-10911\MSSQLSYSCENTER\ReportServer$MSSQLSYSCENTER on D0025-SE-10911.TB.NET. (ID 30184)
1. In the Monitoring task area, resolve the "Unable to configure protection" alert for this data source.
2.Click the link below to retry the job.
D0025-SE-10697\Risk_Mng_Tat_OLTP (D0025-SE-10697.TB.NET)
DPM cannot continue protection for SQL Server 2008 database D0025-SE-10697\Risk_Mng_Tat_OLTP on D0025-SE-10697.TB.NET. (ID 30184)
1. In the Monitoring task area, resolve the "Unable to configure protection" alert for this data source.
2.Click the link below to retry the job.
D0025-SE-10911\MSSQLPOSMONITOR\Demo_DB (D0025-SE-10911.TB.NET)
The SQL Server 2008 database D0025-SE-10911\MSSQLPOSMONITOR\Demo_DB on D0025-SE-10911.TB.NET is not available. (ID 30164 Details: Internal error code: 0x80990D15)
To troubleshoot this issue, verify the following:
1) The database is online.
2) The database is not in a restoring state.
3) The database has not been deleted.
4) The database is accessible.
5) If the database was part of a mirroring session, either re-establish mirroring between the partner SQL Server databases or remove the database from protection and recreate the protection group for this database.
D0025-SE-10757\TAT_DWBI_OLAP (D0025-SE-10757.TB.NET)
DPM cannot continue protection for SQL Server 2008 database D0025-SE-10757\TAT_DWBI_OLAP on D0025-SE-10757.TB.NET. (ID 30184)
1. In the Monitoring task area, resolve the "Unable to configure protection" alert for this data source.
2.Click the link below to retry the job.
Best Regard Mohammad Reza Abdi

Hi,
I assume this is Disk to Tape (D2T) protection and the SQL DB's are online on the protected SQL Server ?
The error code 0x80990D15 = data base is missing. Try restarting the SQL Server VSS Writer service on the protected machine and see if that fixes it. If not, after hours, take one of the database offline and bring it back online, and
try to run another tape backup for that DB. Finally, Try removing just one database from DPM protection group, then re-protect it and see if that helps.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

This message was not delivered for the following reason: 553 Sender is on user denylist (Mode: normal) To address: Can someone tell me how to fix this please?

I can receive emails from this person, but I cannot send without getting a return to sender reply with this message? Appreciate your help.

Talk to your email provider. The error message is from them.

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it. I only have 1 acc

The App Store says I have updates for I-Photo and Garage Band. When I try to update I get the following message: You have updates available for other accounts To update this application, sign in to the account you used to purchase it." Both apps came with my computer and as far as I know I only have one Apple account. Any thoughts? Thanks.
Karen

Thanks for you reply. I'm 99% positive that I'm using the user id and password that I used to set up my computer. That's why I'm stumped. I read the solution someone else suggested (type your user name without @gmail and create a new password. When I tried it, I was asked for my birthday. It didn't recognize it. I know I got my birthday correct. Oh well...
Karen

Presently using iMac: OS X 10.9.4 (13E28) 1. Open website; click drop-down and this appears: Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser. 2. Usi

Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.com

Sorry if I failed to mention, I have done this as well.

GPO - Restricts the UI languages Windows should use for the selected user - not applying correctly on RDS 2012 R2

Hi All,
we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
It seems that the GPO is not changing all settings correctly to german.
Does anybody know what could be wrong?
best regards,
Siegmund

Hi Siegmund,
>>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
Regarding this point, the following artcile can be referred to for more information.
Windows 2008 R2 Language Bar keeps changing Keyboard Settings
http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
In addition, the following thread can also be referred to for more information.
2008 R2 Session Host with MUI controlled via Group Policy
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
Best regards,
Frank Shen

Error message for PDF files "accept the End User License Agreement, then Quit and relaunch the browser"?

Whenever I try to view a PDF file, I'm getting the error message "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser." I have the new Adobe Reader but am still getting this message.

Even after launching Reader and accepting the EULA? Most strange.

After updating ios 5 on ipad1, the ipod app used for the audiobooks is not there anymore ?

the ipod app used for the audiobooks is not there anymore ? It is not availble at the app store and not too sure where to retrieve it ? if possible !
Thanks in advance for any support provided on this.

Thank you Johnathan. We had checked Music before my post but no success. Some mofifications in the settings made it happen !! Cheers

Failed to update permissions used for end-user recovery on . Permissions update failed for the following reason: (ID 3123)

Similar Messages

Maybe you are looking for