Failed to updated my MacBook Pro

I just purchased a new 15 inches Macbook Pro 320GB with 7200rpm 4GB memory last Tuesday which I ordered online.
I just discovered I have sixteen items to update such as security Update 2010 – 001, Java for Mac OS 10.6 Update 1, iMove update, iTunes update…etc. but they all failed to updated.
My Internet is working as it was downloading for twenty-three minutes but this what comes up
“Some of the selected updates couldn’t be saved
The update could not be expanded and verified. It may have been corrupted or tempered with during downloading. The Update will be downloaded and checked again the next time that Software update runs”
When I click “OK” button – this comes up “An error occurred during download”
I had done this three times even with one to install a time, it still failed or any of update software didn’t updated at all. I am keeping trying...
Any advise on this please.

Thanks for moved my question to correct forum.
My new Macbook Pro is as follows:
Model Identifier: MacBookPro5,3
Version 10.6.0 (216)
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Memory: 4 GB
just discovered I have sixteen items to update such as security Update 2010 – 001, Java for Mac OS 10.6 Update 1, iMove update, iTunes update…etc. but they all failed to updated.
My Internet is working as it was downloading for twenty-three minutes but this what comes up
“Some of the selected updates couldn’t be saved
The update could not be expanded and verified. It may have been corrupted or tempered with during downloading. The Update will be downloaded and checked again the next time that Software update runs”
When I click “OK” button – this comes up “An error occurred during download”
I had done this three times even with one to install a time, it still failed or any of update software didn’t updated at all. I am keeping trying...

Similar Messages

  • I want to update my macbook pro, but it's showes always the installation failed and i should contact the software manufacturer for assistance. i want to update my OS X 10.8.4

    i want to update my macbook pro, but it's showes always the installation failed and i should contact the software manufacturer for assistance. i want to update my OS X 10.8.4

    Not normal. Shutdown and restart.

  • I updated my Macbook Pro last week to Lion.  I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!

    I updated my Macbook Pro last week to Lion.  I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!
    Please! I need an answer fast!!!!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • ITunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?

    iTunes won't open after downloading software update.  Macbook Pro OSX10.6.8  Simple solution?  And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to be a good company, but it's becoming just another crappy screw-the-consumer corporation.

    It would help to know versions here.  I'm guessing your update put an older version of something into a place where a newer version of something iTunes put in there existed.  Updating an earlier OSX version to 10.6.8 is still only updating to system software that was issued several years ago.  If you are running some slightly newer version of iTunes issued subsequent to 10.6.8 and you just updated to 10.6.8 you may have put in an older version of something iTunes uses.  Anyway, I'm guessing here until we know exactly what you did.

  • External USB Maxtor One-Touch 3  suddenly fails to mount on MacBook Pro:

    External USB HD suddenly fails to mount on MacBook Pro:
    My One Touch III 600GB drive, external power supply, suddenly will not mount and is not recognized by the system profiler or Disk Utility, however, drive, connected USB, appears under windows XP.
    1. Power cable and usb cable working.
    2. Using external AC adapter(not relying on USB power).
    3. Other USB devices, mice, flash drives work on both USB ports.
    4. Drive works on Windows, folders and data integrity ok.
    5. Drive format is NTFS.
    6. No Maxtor software installed.
    7. No humming or strange noises emanating from drive.
    8. No problem to January 14, 2008,
    9. Mac OS 10.4.10 updates last downloaded and installed Jan 20, 2008.
    10.1 blip of the light on "The One Touch Button", then light turns solid white.
    Questions:
    1. Does Apple set sleep or lock switch for devices (drives)?
    2. If so, can it be reset manually?
    3. Does Apple have configuration profile for devices, like a registry key?
    4. If so, where is it located?
    Configuration:
    Dual 2 GHz MacBook Pro 15”
    2 GB DDR SDRAM
    OSX 10.4.10
    2 USB Ports Left and Right

    NOTE: This Update is required when using a OneTouch Drive as a bootable device. Seagate suggests that you dismount and disconnect your FireWire Drive before continuing.
    Users have identified issues when connecting OneTouch External Drives to FireWire Ports on their Mac G4 and/or G5 computers. These Problems range from system hangs, kernel panics to slow data transfer rates. The cause of these problems has been traced back to the FireWire Driver. Seagate has resolved these problems through updated FireWire Drivers.
    I am using USB and not trying to use drive as a boot device.

  • Updated my macbook pro mid 2009 to 10.9.4 and now it moves slow and rainbow wheels frequently

    I updated my macbook pro mid 2009 to 10.9.4 and now it moves slow and rainbow wheels frequently. Is there a quick and easy fix? I tried looking online but things seemed very confusing. Any help would be appreciated.

    I got a rainbow wheel when attempting to click on a pic in Iphoto. I can copy and paste the next time I have a problem but here is what I have so far.
    9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:37:23.138 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:37:23.139 PM iPhoto[1588]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:37:23.529 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:37:23.579 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:37:23.591 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:37:23.621 PM iPhoto[1588]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:37:24.078 PM iPhoto[1588]: ICAGetDeviceList_Deprecated-Has been deprecated since 10.5.  Calls to this function in the future may crash this application.  Please move to ImageCaptureCore
    9/16/14 2:37:24.866 PM WindowServer[84]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
    9/16/14 2:37:24.919 PM WindowServer[84]: common_reenable_update: UI updates were finally reenabled by application "iPhoto" after 1.05 seconds (server forcibly re-enabled them after 1.00 seconds)
    9/16/14 2:37:51.737 PM Mail[567]: [<_MCLibSasl2SaslClient: 0x600001abf800> mechanism: PLAIN security layer: no] Failed to start the SASL connection
    SASL(-1): generic failure:
    9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:40:43.424 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:40:43.425 PM iPhoto[1597]: This process is attempting to exclude an item from Time Machine by path without administrator privileges. This is not supported.
    9/16/14 2:40:43.624 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:40:43.629 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:40:43.631 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:40:43.635 PM iPhoto[1597]: CFURLGetFSRef was passed this URL which has no scheme (the URL may not work with other CFURL routines): /Applications/iPhoto.app
    9/16/14 2:40:43.969 PM iPhoto[1597]: ICAGetDeviceList_Deprecated-Has been deprecated since 10.5.  Calls to this function in the future may crash this application.  Please move to ImageCaptureCore
    9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
    9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
    9/16/14 2:40:58.282 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295
    9/16/14 2:40:58.283 PM WindowServer[84]: CGXGetConnectionProperty: Invalid connection 104295

  • Updated my macbook pro 10.8.3, it has become very sluggish.

    After I updated my macbook pro to 10.8.3, I found that it has become extremely sluggish and unresponsive at most of the times. Just wondering if anybody else has been facing the same problem.

    Try this:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

    I just Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

    dunno, Lynn--maybe Etrecheck. trying running disk utility to verify the status of your hard drive. That may give you a basic idea. Perhaps tech tool pro.  As for it running hot, I can't say for sure. try shutting it down and using a vacuum clearner +crevice tool around the back of it.  It's been my experience that hard drives usually fail without a lot of warning, luckily you have a backup. Afterwards you can say "Yup, that went bad".  I've done a little research and found out that your MacBook Pro doesn't come with a conventional hard drive as such, but an SSD (solid state device) . It's upgradeable (up to 1 TB ) but not cheaply
    go here for more info (OWC) :http://eshop.macsales.com. For right now, I'd recommend resetting the SMC/PMU, maybe zapping the pram . to do that, reboot, hold down Apple+Option, P+R keys while rebooting. Hold down for 3 chimes, let go and let it boot. as for the SMC thing....
    I'm assuming your battery isn't removeable-shut down computer, plug in MagSafe cable . On built in keyboard, on left side, press Shift-Control-Option and power button at the same time.  release all the keys and the power button. press power button again to turn on computer
    that is all
    John b

  • Whenever i try to update my macbook pro, it downloads then says I need to restart my computer. I restart the computer, and everything just freezes. When my computer eventually turns back on, its not updated. other apps i try to download dont download also

    Whenever i try to update my macbook pro, it downloads then says I need to restart my computer. I restart the computer, and everything just freezes. When my computer eventually turns back on, its not updated. other apps i try to download dont download also

    First, do the following:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    When you complete the above re-download your OS X upgrade (not sure which one that is, but I assume Mavericks.) After the download is completed re-install it. Hopefully, this time it will do what you expect.

  • I updated to MacBook pro last night and now safari won't open

    I updated my MacBook Pro last night and since I did this I can not open Safari.  It crashes and sends a report to Apple.  Not tech smart enouh to figure it out can anyone give me simple suggestions?  

    ted39 wrote:
    I updated to OS 10.8.2 and now Pages won't open
    Please elaborate on what exactly you mean by it "won't open".
    Do you try to launch it and get an error message from the Finder (for example, something like "This application is damaged and cannot be launched....")? Does an icon for the application ever appear in the Dock when you try to launch it? Does it start to launch and then immediately crashes (Finder will display an "unexpectedly quit" dialog)? Or does it start to launch and never seems to "finish" launching (in other words, it basically hangs and is unresponsive)?
    If the application crashes, please post the contents of the crash log here.
    Otherwise, if the application seems to be hanging, can you, before attempting to launch it, open the Console.app application (it's in the /Applications/Utilities/ folder), and see if anything is reported when you attempt to launch it? If so, please post it here.

  • I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

    I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes?  I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
    I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

    Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version.  The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

  • HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

    I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

    Have you tried starting in Safe Mode and see if the slowness still occurs?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
    Reboot normally and test.

  • When I updated my macbook Pro to Maverick, I lost I Photo. How do I get it back to manage my pics?

    When I updated my Macbook Pro to Maverick, I lost I Photo. It seems as if my pics are still on the laptop, but I have a really hard time finding them. I no longer have I Photo. Can anyone help me in getting that application back and putting my pics back in it? I loved the faces feature. Thank you!

    Run the >software update>iPhoto
    If you have a legit copy of of iPhoto you are eligable for the Mavericks compatible version. Look for it in your applications folder along side the older versions.
    If not purchase it on the AppStore to regain access to your iphoto library as you knew it.

  • I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

  • I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?

    I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?

    I Did my usual software updates and it downloaded n asked me to restart so I did, and now it's not starting up

Maybe you are looking for