Failed to upgrade from 2011.08.19

I tried to upgrade to the latest release by running pacman -Syu. but i got an error message saying pacman<3.6
Does aynone know how to slove this issue? Thanks.

I tried the method in that blog. Still doesn't work.
Here is the full output:
/usr/bin/pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: The following packages should be upgraded first :
pacman
:: Do you want to cancel the current operation
:: and upgrade these packages now? [Y/n] Y
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: packagekit: requires pacman<3.6.0

Similar Messages

Failed to upgrade from ERP 6.0 EHP4 to EHP5

Dear SAP Gurus,
we are running ERP 6.00 with EHP4 (HCM-component) based on Windows 2003
SP2 X64 and SQL Server 2005 SP4 (64-bit).
We are using SAP Kernel Unicode 7.01 PL 133 (64-bit).
We intend to upgrade from EHP4 to EHP5.
Upon running SAPehpi, we encountered issue which stopped us from
proceeding with the upgrade.
Case 1: Direct upgrade to 605
The upgrade failed on PREP_INPUT/VERSCHK_INI with error message: The
following combination is not supported (SAP_APPL 600, SAP_BASIS 701,
SAP_ABA 701).
Case 2: Upgrade SAP_APPL component from 600 to 604 (due to the above
error message)
The upgrade failed on PREP_INPUT/VERSCHK_INI with error message:
Release '701' of component SAP_BASIS is too new.
Case 3: upgrade via SAINT is not supported by SAP. When uploading the
Stack XML file, we got error saying that the stack is not supported.
Attached is the complete list of the current SP Level of Installed
components.
Please advise on how we can perform the upgrade to EHP5.
Many thanks in advance.
regards,
Denny

The thing is Solution Manager was able to produce the XML file during the previous upgrade to 604 (the one without SAP_APPL 604).
So how can it not be supported by SAP?
If it is not supported by SAP, how can I proceed from here?
Component Software C SP-Level Support Package Short description of the component
SAP_ABA 701 0007 SAPKA70107 Cross-Application Component
SAP_BASIS 701 0007 SAPKB70107 SAP Basis Component
PI_BASIS 701 0007 SAPK-70107INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0003 SAPKITLRD3 SAP Solution Tools Plug-In
SAP_BS_FND 701 0008 SAPK-70108INSAPBSFND SAP Business Suite Foundation
SAP_BW 701 0007 SAPKW70107 SAP Business Warehouse
SAP_AP 700 0021 SAPKNA7021 SAP Application Platform
WEBCUIF 700 0008 SAPK-70008INWEBCUIF SAP WEBCUIF 700
SAP_APPL 600 0018 SAPKH60018 Logistics and Accounting
SAP_HR 604 0035 SAPKE60435 Human Resources
EA-IPPE 400 0018 SAPKGPID18 SAP iPPE
EA-APPL 600 0018 SAPKGPAD18 SAP Enterprise Extension PLM, SCM, Financials
EA-DFPS 600 0018 SAPKGPDD18 SAP Enterprise Extension Defense Forces & Public Security
EA-FINSERV 600 0018 SAPKGPFD18 SAP Enterprise Extension Financial Services
EA-GLTRADE 600 0018 SAPKGPGD18 SAP Enterprise Extension Global Trade
EA-HR 604 0035 SAPK-60435INEAHR SAP Enterprise Extension HR
EA-PS 600 0018 SAPKGPPD18 SAP Enterprise Extension Public Services
EA-RETAIL 600 0018 SAPKGPRD18 SAP Enterprise Extension Retail
FINBASIS 600 0018 SAPK-60018INFINBASIS Fin. Basis
ECC-DIMP 600 0018 SAPK-60018INECCDIMP DIMP
ERECRUIT 600 0018 SAPK-60018INERECRUIT E-Recruiting
FI-CA 600 0018 SAPK-60018INFICA FI-CA
FI-CAX 600 0018 SAPK-60018INFICAX FI-CA Extended
INSURANCE 600 0018 SAPK-60018ININSURANC SAP Insurance
IS-CWM 600 0018 SAPK-60018INISCWM Industry Solution Catch Weight Management
IS-H 600 0023 SAPK-60023INISH SAP Healthcare
IS-M 600 0018 SAPK-60018INISM SAP MEDIA
IS-OIL 600 0018 SAPK-60018INISOIL IS-OIL
IS-PS-CA 600 0018 SAPK-60018INISPSCA IS-PUBLIC SECTOR CONTRACT ACCOUNTING
IS-UT 600 0018 SAPK-60018INISUT SAP Utilities/Telecommunication
LSOFE 600 0018 SAPK-60018INLSOFE SAP Learning Solution Front-End
SEM-BW 600 0018 SAPKGS6018 SEM-BW: Strategic Enterprise Management
ST-A/PI 01M_ECC600 0001 SAPKITAR7F Application Servicetools for ECC 600-605
VIRSAHR 530_700 0012 SAPK-53312INVIRSAHR SAP GRC Access Controls 5.3 for 700 HR S
VIRSANH 530_700 0014 SAPK-53314INVIRSANH SAP GRC Access Controls 5.3 for 700 HR a

YC_GEN app engine failed after upgrading from EPM 8.9 to 9.1 Rev1

we tried upgrading our EPM 8.9 + tools 8.49.23 application to EPM 9.1 + tools 8.53.08. After upgrading when we tried to run the YC_GEN app engine it failed with the below error.
Error:
17449 20.26.27 0.000111 321: &ln_1 = &lbi_1.Execute();
17450 20.26.27 0.017373 ErrorReturn-> 2 - Interlink Definition: Execution failed. (122,2) DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Name:LoadDepends PCPC:27203 Statement:321
Called from:YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Statement:2
17451 20.26.27 0.000080 <<< end-ext Nest=01 LoadDepends DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Dur=2.480543 CPU=1.190000 Cycles=94840
17452 20.26.27 0.000028 <<< end Nest=00 YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Dur=2.486408 CPU=1.190000 Cycles=94874
17453 20.26.27 0.008761 Database Options: override_connection_reset: 0
we tried using libpsfidrvr.so file which delivered with EPM as well as with tools both is not working.

I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available.

Failing to upgrading from os 10.6.8 to mavericks

i have Mac OS X 10.6.8 and trying to upgrade to Mavericks. When I click upgrade, getting the message failed to open page.

Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

OEM Installation Failed when Upgrading from 10.2.0.4 to 11.1.0.7

I was upgrading a single instance from 10.2.0.4 to 11.1.07 on Unix.
The OEM has never been installed before.
I tried to install the OEM during the DBUA upgrade. And it failed. Parts of the log file look like this.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.EMConfig addEMCALogFile
CONFIG: ORACLE_BASE :/opt/oracle
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/oracle/cfgtoollogs/dbua/citv/upgrade1/emConfig.log.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: citv, oracleHome: /opt/oracle/product/11.1, and user:
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: citv, oracleHome: /opt/oracle/product/11.1, and user: DBSNMP
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: citv, oracleHome: /opt/oracle/product/11.1, and user:
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter SYS_PWD.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: citv, oracleHome: /opt/oracle/product/11.1, and user:
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: citv
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_DOMAIN value: world
Jun 22, 2009 6:58:01 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: citv
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /opt/oracle/product/10.2
Jun 22, 2009 6:58:04 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/oracle/product/10.2/oc4j/j2ee/OC4J_DBConsole/config/
jms.xml in searching for tag jms-server with attribute port
java.io.FileNotFoundException: /opt/oracle/product/10.2/oc4j/j2ee/OC4J_DBConsole/config/jms.xml (No such
file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:295)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1296)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:591)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2582)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2513)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:750)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:257)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:183)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:221)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbma.backend.EMConfigStep.executeStepImpl(EMConfigStep.java:111)
at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:176)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2505)
at java.lang.Thread.run(Thread.java:595)
Jun 22, 2009 6:58:04 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /opt/oracle/product/10.2/oc4j/j2ee/OC4J_DBConsole
Jun 22, 2009 6:58:04 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/oracle/product/10.2/oc4j/j2ee/OC4J_DBConsole/config/
rmi.xml in searching for tag rmi-server with attribute port
java.io.FileNotFoundException: /opt/oracle/product/10.2/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml (No such
file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:295)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1300)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:591)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2582)
Connecting to database citv in home /opt/oracle/product/11.1 with user "" role "SYSDBA".
connected to database.
sql to execute declare repos_pwd varchar2(30); view_user varchar2(30); view_user_pwd varchar2(30); view_
user_acc_status varchar2(30); begin repos_pwd := ?; sysman.mgmt_view_priv.get_view_user(view_user); sele
ct account_status into view_user_acc_status from sys.dba_users where upper(username) = upper ( view_user
); IF view_user_acc_status like '%LOCKED%' THEN execute immediate 'alter user ' || view_user || ' accou
nt unlock'; END IF; IF view_user_acc_status like '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_cr
eds ( repos_pwd ); sysman.mgmt_view_priv.GET_VIEW_USER_CREDS ( view_user, view_user_pwd ); execute immed
iate 'alter user ' || view_user || ' identified by ' || view_user_pwd || ''; END IF; end;
noOfParams to bind: 1.
Jun 22, 2009 6:58:17 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Couldn't execute statement: ORA-28003: password verification for the specified password failed
ORA-20003: Password should contain at least one \
digit, one character and one punctuation
ORA-06512: at line 1 (DBD ERROR: OCIStmtExecute) at /opt/oracle/product/11.1/sysman/admin/scripts/emca/e
mcaDbUtil.pl line 108, <STDIN> line 2.
Jun 22, 2009 6:58:17 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Error executing /opt/oracle/product/11.1/sysman/admin/scripts/emca/emcaDbUtil /opt/oracle/produc
t/11.1/perl/lib:/opt/oracle/product/11.1/perl/lib/site_perl:/opt/oracle/product/11.1/sysman/admin/script
s:/opt/oracle/product/11.1/bin: /opt/oracle/product/11.1/perl/bin/perl /opt/oracle/product/11.1/sysman/a
dmin/scripts/emca/emcaDbUtil.pl /opt/oracle/product/11.1 citv SYS SYSDBA declare repos_pwd varchar2(30);
view_user varchar2(30); view_user_pwd varchar2(30); view_user_acc_status varchar2(30); begin repos_pwd
:= ?; sysman.mgmt_view_priv.get_view_user(view_user); select account_status into view_user_acc_status fr
om sys.dba_users where upper(username) = upper ( view_user ); IF view_user_acc_status like '%LOCKED%' TH
EN execute immediate 'alter user ' || view_user || ' account unlock'; END IF; IF view_user_acc_status li
ke '%EXPIRED%' THEN sysman.mgmt_view_priv.set_view_user_creds ( repos_pwd ); sysman.mgmt_view_priv.GET_V
IEW_USER_CREDS ( view_user, view_user_pwd ); execute immediate 'alter user ' || view_user || ' identifie
d by ' || view_user_pwd || ''; END IF; end; 1 SYSMAN_PWD
Jun 22, 2009 6:58:17 PM oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: Failed to unlock mgmt_view account
Jun 22, 2009 6:58:17 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Jun 22, 2009 6:58:17 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/oracle/cfgtoollogs/dbua/citv/upgrade1/emConfig.log for more details.
Jun 22, 2009 6:58:17 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:335)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbma.backend.EMConfigStep.executeStepImpl(EMConfigStep.java:111)
at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:176)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2505)
at java.lang.Thread.run(Thread.java:595)
Is it possible to reinstall in some way?
Thanks very much in advance.

The error messages in the log file.
Jun 24, 2009 8:59:06 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /opt/oracle/product/11.1/sysman/admin/emdrep/bin/RepManager -connect (D
ESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=callista)(PORT=1521)))(CONNECT_DATA=(SERVICE_
NAME=citv.world))) -repos_user SYSMAN -action drop -verbose -output_file /opt/oracle/cfgtoollogs/em
ca/citv/emca_repos_drop_2009_06_24_20_59_06.log
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 50
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter SYS user's password :
Getting temporary tablespace from database...
Could not connect to SYS/(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=callista)(PORT=152
1)))(CONNECT_DATA=(SERVICE_NAME=citv.world))): ORA-01031: insufficient privileges (DBD ERROR: OCISe
ssionBegin)
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: stty: : No such device or address
stty: : No such device or address
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /opt/oracle/product/11.1/sysman/admin/emdrep/bin/RepManager -connect (DESC
RIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=callista)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAM
E=citv.world))) -repos_user SYSMAN -action drop -verbose -output_file /opt/oracle/cfgtoollogs/emca/
citv/emca_repos_drop_2009_06_24_20_59_06.log
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error dropping the repository
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /opt/oracle/cfgtoollogs/emca/citv/emca_repos_drop_<date>.log for mor
e details.
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error dropping the repository
Refer to the log file at /opt/oracle/cfgtoollogs/emca/citv/emca_2009_06_24_20_58_36.log for more de
tails.
Jun 24, 2009 8:59:07 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error dropping the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:208)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:535)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1215)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:519)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:468)
Thanks.

Custom Reports Snapshots Disappeared when upgrading from 2011 to 2013

Hi all,
We are in the process of upgrading our CRM 2011 instance to CRM 2013. Both instances are on premises and use separate servers (SQL, front-end,etc...). This is how we went about it:
- installed CRM 2013 on a new server using a different SQL server than the one used by the CRM 2011 installation.
- took a backup copy of the CRM 2011 database and restored it on the CRM 2013 server
- imported the CRM 2011 organisation on the CRM 2013 installation using the deployment wizard
- the import went without any errors
Now for the issue we are experiencing:
- in the CRM 2011 we have several custom reports snapshots which were then used for subscriptions via SRS
- the custom reports have been imported OK into the 2013 deployment when we imported the organisation
- the custom reports snapshots have not been imported into SRS although they are listed in the CRM user interface under the reports section. When trying to run the reports from the CRM user interface an error message is displayed that the requested does
not exist (as expected as the file does not exist on SRS)
Any assistance would be much appreciated.

Hi Jeffki123,
I can reproduce it as you describing. Based on my understanding, the task pane is drawed by Word applicaiton, the Word applicaiton need to make task pane fit the current version of Office.
>>Is there anyway to control the font size of the custom task pane title?<<
No. As far as I konw, we can only change the size and postion of custom task pane. You can get more detail about the task pane from links below:
Custom Task Panes
CustomTaskPane Interface
I suggest that you submit the feedback from link below, if you want to Word expose this function to enable change the font size of custom task pane.
Submit Feedback - Microsoft Support
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Best way to upgrade from 2011 to 2012

Hi:
What is best way to upgrade LabVIEW 2012 from LabVIEW 2011 ?
a) Install 2012 over 2011
b) Remove 2011 and then install 2012
Thank You!

Hi GE,
as LV2012 still is in beta state you should probably use a different computer than is used for your productive LV2011 environment
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

ICal delegation failing after upgrade from Snow Leopard to Lion

I've just upgraded our Snow Leopard server to run Lion Server.
I have a problem with iCal Server.
Individual calendars work OK: can be accessed from iCal / iThings and so on, and via web interface. But calendar delegation doesn't.
If I open Accounts / Preferences / Delegation from any version of iCal / Calendar I get this error:
In the server calendar server error log I see the following:
[twext.web2.dav.method.report_expand#error] Error reading property (u'http://calendarserver.org/ns/', u'calendar-proxy-read-for') for resource /principals/__uids__/BCDF1D53-4447-40A2-A035-B30F6E2EEDE4/: <StatusResponse 403 Unable to list properties: /Volumes/StorageHD/Library/Server/Calendar and Contacts/Documents>
Anyone got any ideas what is going on and / or how to fix?
Thanks in advance for any help available.

OK - Fixed it.
Turns out the cure is to use the Webcal Interface to re-create the delegations. A bit tedious, but doing this presumably forces a rewrite of the file that previously cannot be accessed. Means you need to set up the delegation again for each account - but this at least is an improvement over not being able to do anything at all.
Once fixed, delegation works just fine.
Hope this helps someone else solve the issue etc.

Win 7 basic, failed to upgrade from iTunes 10.4 to 10.5

I was previously using iTunes 10.4 with no problem, so I doubt it's not really a Windows problem. However I was trying to update my iTunes to 10.5 because of iOS5, the Apple Software Update stuck on the installation. So I was advised to download the update manually, which I did, and install the update.
To cut the story short, it was a failed attempt. I uninstall iTunes and all its related software (and I think I screwed up everything by not uninstalling the softwares in its order). Anyway I ensured no trace of apple related files in my computer, and when I tried to install iTunes 10.5, it said "Apple mobile device failed to start.
Verify that you have sufficient privileges to start system services."
This is really frustrating. Anyone got any similar experience and able to help? I have tried reinstalling, uninstalling for a few hours. This is unnecessary issue to start with.

I recieved the same message. Have you found a fix to this?
If not, read my issue because I belive we have the same
https://discussions.apple.com/thread/3442836
It would be nice to work this out with another person.

Win10 wlan fails after upgrade from Win7

Worked fine on Win7Upgraded to Win10.The WLAN key on the keyboard in now orange, even while booting or in BIOS setup.Device Manager shows the Broadcom WLAN device is active and functioning. Networking can't find the adapter- has an X in the Wi-Fi connect window.Network troubleshooter says to turn on WLAN via switch or keyboard. Since the light on the key is always orange, is it a BIOS issue?WLAN settingss shows WI-FI as Off. You can't change the state to on. (Works fine on my ProBook 6460 on Win10, but that was a clean install.) LAN adapter working fine. I tried an older Win8 driver set from the HP Website. No difference.

No one else having this issue?It's really strange , since device manager says the driver is installed and happy. The F12 key just turns Flight mode on/off -- makes no difference to WLAN working.I even remove the Broadcom WLAN adapter and replaced it, to make sure the connection was good. I hate going back to Win7.

Wls-10.3.4 AD auth failed with ADF 11.1.1.3 app after upgrade from 10.3.3

Hi,
i have posted same issue on wls-10.3.4 Active Directory Authentication failed after Upgrade from 10.3.3
I'm not sure if this could be an adf or wls topic.
we have a wls 10.3.3 Installation with ActiveDirectory authentication provider.
Delegated authentication against AD has worked very well.
Now we have installed wls 10.3.4 and have configured the ActiveDirectory authentication provider in the same manner.
Users and groups are listed like before in wls console, but authentication from our running ADF application is answered with "invalid username or passwort".
No exceptions are logged in domain or admin server logs.
The application was developed and compiled (ojdeploy) with jdev 11.1.1.3.
wls 10.3.4 domain is upgraded with adf 11.1.1.3 libs.
Authenication over wls console with AD credentials also fails.
Has anybody made same experiences or workarounds?
Thanks in advance
Andre

Hi,
you should take a look at the ADF security files , especially the jazn xml file. Try to open your PS2 application in the new Ps3 Jdev and look if there are changes to the jazn.xml.
Or you can check the jazn data xml file in the fmwconfig folder of the config domain folder.
and check all the authenticators if everything has the sufficient control flag.
hope this helps

Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

I have a group of 6 unit tests failing after upgrading to the new Kodo
4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
exceptions like the one at the bottom of this email. It seems to be an
interaction with the PostgreSQL driver, though I can't be sure. I
haven't changed my JDO configuration or the related classes in months
since I've been focusing on using the objects that have already been
defined. The .jdo, .jdoquery, and .java code are below the exception,
just in case there's something wrong in there. Does anyone have advice
as to how I might debug this?
Thanks,
Mark
Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
Testcase:
testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
Caused an ERROR
The column index is out of range: 2, number of columns: 1.
<2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
range: 2, number of columns: 1.
at
kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
at
kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
at
edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
NestedThrowablesStackTrace:
org.postgresql.util.PSQLException: The column index is out of range: 2,
number of columns: 1.
at
org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
at
org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
257)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
at kodo.jdbc.sql.Union.execute(Union.java:326)
at kodo.jdbc.sql.Union.execute(Union.java:313)
at
kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
--- DefaultUser.java -------------------------------------------------
public class DefaultUser
implements User
/** The account username. */
private String username;
/** The account password. */
private String password;
/** A flag indicating whether or not the account is enabled. */
private boolean enabled;
/** The authorities granted to this account. */
private Set<Authority> authorities;
/** Information about the user, including their name and text that
describes them. */
private UserInfo userInfo;
/** The set of organizations where this user works. */
private Set<Organization> organizations;
--- DefaultUser.jdo --------------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<sequence name="user_id_seq"
factory-class="native(Sequence=user_id_seq)"/>
<class name="DefaultUser" detachable="true"
table="whisper_user" identity-type="datastore">
<datastore-identity sequence="user_id_seq" column="userId"/>
<field name="username">
<column name="username" length="80" jdbc-type="VARCHAR" />
</field>
<field name="password">
<column name="password" length="40" jdbc-type="CHAR" />
</field>
<field name="enabled">
<column name="enabled" />
</field>
<field name="userInfo" persistence-modifier="persistent"
default-fetch-group="true" dependent="true">
<extension vendor-name="jpox"
key="implementation-classes"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
<extension vendor-name="kodo"
key="type"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
</field>
<field name="authorities" persistence-modifier="persistent"
table="user_authorities"
default-fetch-group="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultAuthority" />
<join column="userId" delete-action="cascade"/>
<element column="authorityId" delete-action="cascade"/>
</field>
<field name="organizations" persistence-modifier="persistent"
table="user_organizations" mapped-by="user"
default-fetch-group="true" dependent="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultOrganization"
dependent-element="true"/>
<join column="userId"/>

</field>
</class>
</package>
</jdo>
--- DefaultUser.jdoquery ---------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<class name="DefaultUser">
<query name="UserByUsername"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
WHERE username==searchName
PARAMETERS java.lang.String searchName
]]></query>
<query name="DisabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==false
]]></query>
<query name="EnabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==true
]]></query>
<query name="CountUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
]]></query>
</class>
</package>
</jdo>

I'm sorry, I have no idea. I suggest sending a test case that
reproduces the problem to support.

Managed Server Startup failed after upgrade to 11.1.1.6 from 11.1.1.4

We tried to upgrade from SOA Suite 11.1.1.4 to 11.1.1.6.
After upgrade when we tried to start our managed servers we get the below error. Did anyone ran into this? If so how did you resolve it?.
Its still referring to some Weblogic 10.3.4 libraries. We were not able to find out where..
<Mar 22, 2012 3:21:29 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:610)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:577)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:482)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315) Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Truncated. see log file for complete stacktrace>
The WebLogic Server encountered a critical failure
Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:145) at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:427) at weblogic.jndi.Environment.getInitialReference(Environment.java:245) at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1083) at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:415)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482) at weblogic.Server.main(Server.java:71)
Thanks,
Jp

Hi,
I found an oracle note with the next solution:
Add -Xverify:none to the JVM Arguments in the WebLogic console if you're using Node Manager to start managed servers:
1. Go into WebLogic Console
2. Navigate to Environment> Servers> [Sever_name]> Server Start> Arguments
3. Add -Xverify:none to the arguments
4. Restart the WebLogic server
5. Retest the issue.
6. Migrate the solution as appropriate to other environments.
Or
If you're not using Node Manager to start managed servers:
Edit the WebLogic start-up script to add -Xverify:none to the JVM arguments
See if it works for you
Arik

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the install fails reporting "insufficient memory".
I assume the installation requires more memory than the OS actually needs to be able to run.
I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
You need much more RAM than that.
Leopard system requirements:
http://support.apple.com/kb/SP517

Upgrade from Windows Home Server 2011

Even though Windows Server 2012 Essentials is being mentioned as a replacement for Windows Home Server 2011, there doesn't seem to be any documentation or mention of can you upgrade from Windows Home Server 2011 to Windows Server 2012 Essentials?
Will this work with the beta download and will we then be able to upgrade this version to the RC and/or release version?
As you may guess I have a Windows Home Server 2011 and am interested in looking at Windows Server 2012 Essentials to see what it offers me. The storage spaces sounds exactly what I want to replace the drive extender on the previous home server version. The
problem is that I don't mind sacrificing my present server box by installing the beta but it would be nice if it actually retained what settings it could via an upgrade option, which I could then have a chance of using with a proper release version.

Just clarifying about the 'upgrade path' and 32b vs 64b.
Yes, no in-place upgrade. However, one could theorise about some form of 'migration' being possible, where the list of users, the content of your shares, the current backups, would be 'moved' from old box to new.
I was in fact pretty sure no such process existed. (Wouldn't it be neat though? AND in future _at least theoretically_ possible, using processes similar to SBS AD migration.)
From this perspective putting the new box onto the network is similar to replacing WHSv1 with WHS11, in that nothing is carried over. No gain, but no lesser. Working on currently available information.
The later comment about the work laptop is, TTBOMK, a resounding 'NO'. When attempting to join a member of another AD the 'connect' process stated 'You must 1st remove the PC from the other AD'. I haven't tested this extensively but believe that PC's _capable_
of operating in an AD (Pro, vs Home, versions) will be made members of the WS12E AD. It is only PC's that do not have 'domain join' capability that are left in workgroup mode.
TTBOMK, AFAICS, so far, etc...

Failed to upgrade from 2011.08.19

Similar Messages

Maybe you are looking for