Failed to upload data to S_ALR_87013326 report

Dear Expert,
I've added 3 new value fields at KEA6 and assigned it to planning layout and mapped to our operating concern. Then maintained at KEI2 for assigned source (cost elements) and value fields. When I upload from KE13N and KE1V, there's no amount posted for the 3 new value fields at S_ALR_87013326 report. Is it related with pricing procedure?
1) Special Campaign-Sales
2) Respray & Painting
3) Marine Insurance
Pls help me.. Am I missing some config? Really appreciate your help.
Thanks

Hi AP,
I've maintained at KE4I as well. Still failed to read the amount from new value fields. If I change amount for the 3 new fields only and upload again using KE13N, no data changed. Checked line item at KE25, no amount for the new fields. As if KE13N failed to read the value fields at planning layout. I've assigned new value fields at planning layout.
Help me..
Thanks

Similar Messages

Exchange rate fields get failed when uploading data

Hi,
I have a problem when uploading purchasing data (2LIS_02_SCL) from R/3 to BW. Basically the exchange rate value is right in the PSA but NOT in the cube.
I just wondering what did they do when transfering the exchange rate data from PSA to cube. I have already checked the transfer rules and update rules, but no logic in there. So the logic should be ONLY pass the value, but somehow different value coming up.
Maybe you can have different think about this ?
FYI, I have already transfered global settings and exchange rates from R/3 to the BW. Is there any settings that I missed ?
Very appreciate of your help.
Thanks a lot
Martin Darmawi

Hi Roberto,
Thanks for your answer.
I think it has aggregation behaviour.
Do you know how I can avoid aggregation behaviour for a keyfigure ? Because I can't edit aggregation field and I tried to change the exception aggregation field with First Value, No Aggregation and Avarage value but it does not work.
Please let me know what you think.
Thanks and Appreciate for your help,
-Martin Darmawi-

ORA-00060 hrjptkfl.ldt, hrzatkfl.ldt workers failed while uploading data

Hi,
I had a strange error while applying the NLS patch. I had two workers failed with ORA-00060 deadlock detected while waiting for a resource. for the two files.
on the table HR_NAVIGATION_UNITS.
The good thing is the individual requests which these two workers executing completed successfully.
After searching a lot i could not find any thing relevant to it and just restarted the failed worker using adctrl. And the patch completed that phase. Wonder why thi happened.
Any way this is not a question, any ideas are appreciated.
Regards
Taher

Taher,
And the patch completed that phase. Wonder why thi happened. If the patch completed successfully then there is nothing to worry about. Sometimes when doing the installation, the same error is reported in the installation log files, but as long as the installation complete successfully, then you can simply ignore those errors.
Regards,
Hussein

Crystal Reports - Failed to retrieve data from the database

Hi There,
I'm hoping that somebody can help me.
I've developed a crystal report from a stored procedure which I wrote. I can execute the stored procedure within SQL Server and within the Crystal Reports designer without any errors. Furthermore, I have imported the report into sap and can run it within SAP from the server without any errors. SAP version 8.81 PL5
The issue is that when it's run from a client machine, I get the following error: "Failed to retrieve data from the database. Details: Database Vendor Code: 156. Error in the File RCR10010 {tempfile location}
Here's a list of things which I have tried, all to no avail:
- Checked user permissions to ensure that they have proper authorizations
- Re-set the datasource connection and re-imported the report to SAP.
- Exported the report and reviewed the datasource connection and re-imported to SAP.
- Tried to run the report on multiple machines to ensure that it's not machine specific
- Tried to run the report using different users to ensure it's not user specific.
- Tested other reports built from stored procedures on client machines to ensure that they work.
Any assistance in this would be GREATLY appreciated.
Thank you

After further testing, we found that the report could be run within SAP on any work station which had the CR designer installed on it.
As it turns out, the procedure which I wrote has temp tables in it. The runtimes built into the SAP client install do not support creating temp tables when executing the report from within SAP. Which is why the report could not retreive data.
To work around this, I installed external runtimes which were the same version of the Crystal Report and now the report can be run within SAP from any workstation which has the external runtimes (and not just the runtimes within the SAP client).
I hope this makes sense.

Crystal Reports 2008 failed to retrive data, and instead deleted it.

I have been using crystal reports 2008 for the past year or so with our billing software through an OBDC data source. I was using xp pro sp3. However I recently upgraded to a new computer running xp pro sp3 as well, and now I am having some serious issues.
When I try to connect to a data source in the database expert, it shows all the tables, and then the field explorer shows the fields, but when I actually try to brows the data, view a preview, verify the database, or refresh an old report it gives me an error and DELETES the .dat file that the field was located in. I am so glad I have regular backups to restore too, because pulling a report nuked 5 .dat files.
The errors I am getting are as follows:
"Failed to retrieve data from database."
Clicked ok
"Failed to retrieve data from database."
Clicked ok
"Database Connector Error: 'HY000:[Pervasive][ODBC Client Interface][LNA][Pervasive][ODBC Engine Interface][Data Record Manager]The file cannot be created with Variable-trail Allocation Tables (VATs)(Btrieve Error 105)'"
Clicked ok
"Failed to retrieve data from database.
Details:HY000:[Pervasive][ODBC Client Interface][LNA][Pervasive][ODBC Engine Interface]Unable to open table: <nameoftable>"
Click ok
and Crystal stays open but has just deleted the .dat file that the table was located in. It will still show the fields but no data. Trying to open the other software leads to an error "missing <name of table>.dat" It then has to be restored from a backup.
I have tried updating crystal as well as fully uninstalling it and reinstalling it, we have created a new ODBC connection, and cloned the database for testing purposes. The same thing occurs with the new database and ODBC data source.
We have no other computers, except my old one that has crystal reports on it. I have tried the old computer again and it is working fine.
Does anyone have an suggestions? This is pretty critical. Thanks in advance.
Edited by: Russellk on Jan 13, 2010 8:27 PM

Hello, you could try turning on ODBC tracing to see if it logs anything. It's a pain to get going but here's how.
Go to ODBC Admin, Click on the Tracing tab and create a log file and save. Don't start tracing yet. Close the ODBC admin and then re-open it and then turn tracing on. You may have to do this a few times to get it working.
Once it's tracing then open CR and try the demo data. Then close the report, log off, log onto the real data and do the same with a new report. You'll see a bunch of ODBC API's but there may be one or 2 that don't look right or errors may be logged compared to the DEMODATA.
Another suggestion is it may not be your PC doing the deleting. Maybe the Server thinks you have infected the data files and it's deleting them. Have a look in anti-virus quarantine logs on the server to see if it's doing the nasty....
Check the trust between your PC and the server.
I've also seen this type of odd behaviour with corrupted Profiles. Check with your IT guys on creating a new one for you, it's apain because you loose everything on your work station.
What happens if you log on from another PC using your account? Does that also delete the files? Or get someone else who it does work for log into your PC, does that work? If so it may be your Profile is either not trusted or it's been corrupted.
Good luck
Don

Failed to retrieve data from the database crystal reports 2008 in SAP B1

Hello friends,
I am using Crystal report 2008 with SAP B1 PL 8.8. When I run any report, it runs correctly from Crystal Report. But whenever I try to open the same report through SAP ( Tools -> Preview External Crystal Report ), it prompts the parameters for that report and then open up the crystal report window and throws an Error message ("failed to retrieve data from the database. Details [Database Vendor Code: 156]").
Please any one suggest me the corrective solution.
Thanks in Advance,
Keyur Raval.

I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
Radoslaw Blaniarz

Failed to read data from report file Reason: The table could not be found.

BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
Regards

Connection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated.

Crstal Reports: "Failed to retrieve data from the database"

Running a report in crystal report from SAP 8.81 using the following parameters: CardCode, GroupCode, Date gives the following error: "Failed to retrieve data from the database" "Conversion failed when to converting the nvarchar value to data type int 12/31/2005 [Database vendor code: 245] ".
The store procedure in SQL Server executes smoothly and If you run the report with the date = 12/31/2005 in the parameter also returns expected results.
Thanks.

Hello,
Is this in Business One? If so CR is an OEM build and that forum/product supports that version.
Please post your question to: http://forums.sdn.sap.com/index.jspa#44
It could simply be you need to use a formula to convert the field. Click on the Formula Editor and the hit the F1 key and search on "date". Lots of info on how to convert todate and from date tostring...
Thank you
Don

Failed to retrieve data from the database using Crystal Reports XI R2

I am using Crystal reports XI R2 and using the Universal Web Connector (connecting to Coghead). When I put some some of the fields from the database and run Preview I get "Failed to retrieve data from the database." . Where is this message coming from and how can I track down what the issue is?

Hi Jamie,
When you are trying to Browse Data of a field it is not poping up any window menas, it is unable to interact with database and get the data from database.
Try to create a new report using ODBC with Xtreem Sample Database. If you get the data in your report without any error then your connector is not working / unable to pull the data into your report.
You can find the supported platforms document in below link
http://support.businessobjects.com/documentation/supported_platforms/xi_release2/default.asp
Thanks,
Sastry

Crystal Reports 2008 - C-ISAM/ODBC Error 42000 Failed to retrieve data

I'm hoping someone out there has a solution to this problem.
I have a bunch of reports which I've converted from CR8.5 to CR2008 (SP2 + HotFixPack 2.7 Installed)
Our server is currently running SCO UNIX OpenServer 5.0.7 with a C-ISAM Database serving our accounting software.
Some of the more basic reports have converted with no problem (daily sales figures etc...), but some reports such as customised purchase orders, and complex sales histories etc... continue to have this problem.
Note, all my reports functioned perfectly under CR8.5.
This error occurs within seconds of executing the report.
FAILED TO RETRIEVE DATA FROM THE DATABASE
Details: 42000:ERROR Syntax Error - Database Vendor Code: -1
After which, the winsock comms need to be reset.
One example SQL query is as follows (on a report re-designing my purchase order for imported products.
SELECT purchase_order.po_order_no, purchase_order_line.stock_code, purchase_order.po_backorder_flag,
purchase_order_line.po_line_description, stock_master.stk_desc_line_3, stock_master.stk_description,
stock_master.stk_desc_line_2
FROM (purchase_order_line purchase_order_line INNER JOIN purchase_order purchase_order ON
(purchase_order_line.po_order_no=purchase_order.po_order_no) AND (purchase_order_line.po_backorder_flag=purchase_order.po_backorder_flag))
INNER JOIN stock_master stock_master ON purchase_order_line.stock_code=stock_master.stock_code
Does anyone have any idea??? Really driving me insane... Is it the order of my links, type of links, grouping??????
Strangely, some other similarly linked reports work perfectly.
Cheers in advance,
Steve

Hi Steve,
If you open the Report and then click on DataBase, Log on and connect first. Then open your report, then Database, Set Location and once it's done then Verify the Database. Fix any errors or warnings that may pop up.
Lots of changes between 8.5 and 2008. CR detects that the report is the old format and it then goes through an series of internal report upgrade routines to convert all functions to the current format.
Also, all of the database drivers were re-written to take advantage of the updated functionality and Client enhancements. As well as we removed any "custom hacks" that we did back then to fix "issues" int he DB client drivers at the time. All of those "fixes" were removed, to much work to maintain them all, now if there are issues it's usually due to the DB Client not following ANSII 92 Standards.
One issue that does show up from time to time is that the order you inserted the tables can have an affect on how CR generates the SQL, may not be the case for your issue though, just something to watch for.
What happens if you create a new report and use that same SQL, save it, close all, re-open the report and run it. Do you get the same errors?
Also note: you did not say if you also updated the ODBC driver? As of CR 9 we are UNICODE compliant, may be your client needs to be updated also. Also verify it's using ODBC 3 and not ODBC 2 standards.
Thank you
Don
Edited by: Don Williams on May 6, 2010 7:21 AM

Report error "Failed to retrieve data from the database."

Post Author: tknorst
CA Forum: .NET
I have an application using CR XI R2, and on certain users computers when they try to run a report they get the following error:
Failed to retrieve data from the database.Details: [Database Vendor Code: 229]Failed to retrieve data from the database.Error in File C:\DOCUME1\turkj\LOCALS1\Temp\WhseEmpJobAndActivityByUserAndDate {22DA2F53-4391-4307-9F2A-0E3C3EBE2198A}.rpt
The report uses SQLOLEDB (ADO) and integrated authentication - it runs fine on the development machine.
I found very little info on this error on the web (google) - so I hope someone here has an idea.

You need to make sure that those systems can get conneted to the database that is supposed to return data. To check that create a udl in clients machine.
Also do not change the schema of he report.

Failed to read data from report file, failed to read parameter object

Error message when doing a u201CSchedule List of Valuesu201D
failed to read data from report file,
c:\docume~1\user........
failed to read parameter object
Earlier in the day it worked just fine nothing had been changed.
I have admin right on the windows server and in central management console
Can someone please help with this issue.

Hi Glenn
Please let us know the following:
1.What is the exact version of Crystal Reports Designer?
2.What is the version of Business objects Enterprise installed on the machine?
3.Are reports based on Business views,Deski,Webi?
4.Are the reports migrated from older version of Crystal Reports to new Version?
Thanks
Shraddha

Failed to read data from report file : Reason: Crystal Reports: Print Engin

Hi,
When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
Would please someone help me in fixing the issue.
Thanks and Regards,

Few quick checks to identify the cause -
1. Are you able to run report in your R2 system?
2. In XI3.1, check SIA running on which account.
3. Check the acount have sufficient rights on file system and registry.
4. What's your web server?
Give proper rights and import again. Hopefully it will resolve.
Edited by: Das on Dec 6, 2010 9:47 PM

Failed to read data from report file

Hello ,
When iam trying to publish crystal report to Bo enterprise using Publish wizard, i get below error
*"Failed to read data from report file C:\Users\prakash\Desktop\new_obj.rpt. Reason: File I/O error. File ~cidbc64f360135e0.rpt."*
can you please help me in resolving it
Regards,
KumarTP

Please post this to the [Business Objects Enterprise Administration|BI Platform; forum.
- Ludek

Jdeveloper 11.1.1.6 fail to post data with uploaded orddoc file

I migrated our application in 11.1.1.6 from 11.1.1.4
everything works fine except from posting data of entity with OrdDocDomain attribute.
Anyone have the same issue?
the log is
JBO-26041: Failed to post data to database during "Update": SQL Statement "UPDATE DOCUMENT Document SET FILENAME=:1,LOBCONTENT=:2,UPDATED_BY=:3,UPDATED_ON=:4,OPTLOCK_VERSION=:5 WHERE ID=:6".
     at com.sun.el.parser.AstValue.invoke(Unknown Source)
     at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
Caused by: oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Update": SQL Statement "UPDATE DOCUMENT Document SET FILENAME=:1,LOBCONTENT=:2,UPDATED_BY=:3,UPDATED_ON=:4,OPTLOCK_VERSION=:5 WHERE ID=:6".
     at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:583)
     at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:8647)
     at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:8579)
     at com.intralot.igp.model.base.EntityImpl.doDML(EntityImpl.java:96)
     at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6816)
     at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3290)
     at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3093)
     at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2097)
     at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2378)
     at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1615)
     at oracle.adf.model.dcframe.LocalTransactionHandler.commit(LocalTransactionHandler.java:139)
     at oracle.adf.model.dcframe.DataControlFrameImpl.commit(DataControlFrameImpl.java:1226)
     at com.intralot.igp.view.utils.ADFUtils.dcCommit(ADFUtils.java:466)
     at com.intralot.igp.taskflows.view.backing.documents.Documents.editDocumentListener(Documents.java:67)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     ... 72 more
Caused by: java.sql.SQLException: Undefined type
     at oracle.jpub.runtime.Util._convertToOracle(Util.java:277)
     at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
     at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
     at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
     at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
     at oracle.ord.im.OrdSource.toDatum(OrdSource.java:93)
     at oracle.jpub.runtime.Util._convertToOracle(Util.java:183)
     at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
     at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
     at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
     at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
     at oracle.ord.im.OrdDocBase.toDatum(OrdDocBase.java:96)
     at oracle.jdbc.driver.OraclePreparedStatement.setORADataInternal(OraclePreparedStatement.java:10450)
Anyone have the same issue?
Thanks

We are getting the same issue when migrated to latest WLS version 10.3.6.0(ADF runtime 11.1.1.6) from WLS 10.3.3.0.
The Exception we are getting while trying to post an ORD type object:
java.sql.SQLException: Undefined type
at oracle.jpub.runtime.Util._convertToOracle(Util.java:277)
at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
at oracle.ord.im.OrdSource.toDatum(OrdSource.java:93)
at oracle.jpub.runtime.Util._convertToOracle(Util.java:183)
at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
at oracle.ord.im.OrdImageBase.toDatum(OrdImageBase.java:99)
at oracle.jdbc.driver.OraclePreparedStatement.setORADataInternal(OraclePreparedStatement.java:10450)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:11651)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:11631)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:253)
at weblogic.jdbc.wrapper.PreparedStatement.setObject(PreparedStatement.java:357)
at oracle.jbo.server.OracleSQLBuilderImpl.bindInsertStatement(OracleSQLBuilderImpl.java:2035)
at oracle.jbo.server.EntityImpl.bindDMLStatement(EntityImpl.java:10516)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:412)
at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:8647)
at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:8579)
at oracle.apps.grc.cms.model.eo.MediarepositoryimagesImpl.doDML(MediarepositoryimagesImpl.java:52)
Can anyone please help on this. Is there any work around available?

Failed to upload data to S_ALR_87013326 report

Similar Messages

Maybe you are looking for