Failed to verify gateway status. The remote name could not be resolved: 'machinename' Office 365, Power BI

Hi
I am trying to setup a Power BI On Premise datasource at a client site. 
I successfully installed the Data Management Gateway (DataManagementGateway_1.2.5303.1_en-us (64-bit)) software on a Windows Server 2012 box and created the Gateway on the Power BI Office 365 site.
The Gateway is running correctly with no errors. When trying to setup the Datasource I get an error. As soon as I try to set the credentials the following message appears. 
Failed to verify gateway 'GatewayName' status. The remote name could not be resolved: 'servername.domainname.net’ 
The servername which is returned in the error message is exactly the name which the DMG was installed on. 
There is a firewall in place with a proxy server and I don't know if this might cause the problems. The
following website suggests adding the proxy settings in the config files of the DMG but this did not solve the problem.
The above setup process works perfectly when running the DMG from my laptop, connecting to a Gateway and creating a DataSource connecting to SQL Server.
Any assistance would be appreciated.

HI
Thank You for the reply.
I resolved the issue in the mean time. I was on laptop which does not belong to the domain.
When setting up the datasource you should be on the same domain as the datasource as per the below post.
http://sharepoint-community.net/profiles/blogs/connecting-office-365-to-on-premises-data
Regards, Drickus

Similar Messages

  • The remote name could not be resolved

    We are running Office 365 Power BI (as a trial) and published our data through the data manager gateway service.
    We are able to retrieve a list of shared tables / views through Power Query in Excel 2013 Professional Plus.
    However, when clicking on edit on any table returned we get this error in the Power Query window:
    DataSource.Error: OData: Request failed (NameResolutionFailure):
    The remote name could not be resolved: 'SERVER-NAME.DOMAIN.local'
    Details: https://POWERBISITE.hybridproxy.powerbi.com/ODataService/v1....
    I have tried configuring the Data Manager Gateway service to run HTTP (at first) and HTTPS.
    Could this be a port number issue? Or what else?
    Appreciate any help, Thank you
    Ian

    Hi intrasight,
    I gave the hosts thing a try.
    I was getting 'unable to resolve' errors in attempting to use Power Query in a small stand-alone test domain (all computers are in the domain, and in this little LAN).  So I edited
    hosts in C:\Windows\System32\drivers\etc
    I added this line: 
    192.168.0.4 mycomputer.ad.mydomain.com
    mycomputer is the name of the computer running the Data Management Gateway, and
    ad.mydomain.com is the name of the domain.
    Now, I get
    <textarea class="role-selectableText" cols="1" readonly="readonly" rows="1" style="width:659px;height:87px;" tabindex="-1">DataSource.Error: OData: Request failed: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS
    secure channel. Details: https://mydomain.hybridproxy.powerbi.com/ODataService/v1.0/mydatasource</textarea>
    Which tells me that hosts on the client is indeed now resolving the name/IP correctly, and Power Query is  finding the DMG directly (rather than via the
    hybridproxy.powerbi.com cloud service).
    But that's terrible!  
    A) I shouldn't need to use hosts since
    B) the hybridpproxy cloud service is finding the DMG on my database machine (because the Test Connection works OK) 
    C) but without hosts the client Power Query says that "The remote name could not be resolved"
    DataSource.Error: OData: Request failed: The remote name could not be resolved: 'mycomputer.ad.mydomain.com'
    Details:
    https://mydomain.hybridproxy.powerbi.com/ODataService/v1.0/mydatasource
    There's no way an actual production system should require editing
    hosts on all client machines.
    So to my mind, the original question is still outstanding. 
    How do I get Power Query to resolve the remote name?
    Cheers, Donna
    Donna Kelly

  • Cannot Create New Share from Azure PowerShell - The remote name could not be resolved

    I have created a storage account. It seems that there isn't a specific way to create file storage rather than blob storage.
    I followed the instruction for creating a share in Azure Power Shell but when I try $s=New-AzureStorageShare... I keep getting the error "The remote name could not be resolved".  I checked the account name and it matched what is shown on the
    Azure site.
    I also cannot access the storage from the URL's.  I get the message "This page can't be displayed.
    How can I create a file storage account and a share to it?
    Thanks,
    Glen

    Hi Glen,
    Thanks for your post!
    Did you sign up your File Service ?
    To sign up, go to the Microsoft Azure Preview Portal, and sign up for the Microsoft Azure Files service using one or more of your subscriptions. As subscriptions
    are approved for the Azure File preview, you will get an email notifying you of the approval. We will be slowly opening up the service to users in batches, so please be patient after signing up.
    After sign up and enable this feature, I suggest you could refer to this blog for how to use Azure File service (
    http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx#faq7 ).
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved.

    I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
    I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.

    Hi,
    In addition, please make sure that the port 443 is not blocked by the firewall.
    Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
    these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
    placed in front of the Web Application Proxy server.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Azure File Storage error The remote name could not be resolved

    I am following http://azure.microsoft.com/en-us/documentation/articles/storage-dotnet-how-to-use-files/ 
    While executing $s = New-AzureStorageShare mysampleshare -Context $ctx  I get error as
    New-AzureStorageShare : The remote name could not be resolved: 'mystorageaccount.file.core.windows.net'
    At line:1 char:6
    + $s = New-AzureStorageShare elasticsearch -Context $ctx
    +      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : CloseError: (:) [New-AzureStorageShare], StorageException
        + FullyQualifiedErrorId : StorageException,Microsoft.WindowsAzure.Commands.Storage.File.Cmdlet.NewAzureStorageShare
    Thanks,
    Subodh

    Azure Files is a Preview feature. Did you request and got access to it at the billing portal's Preview Features (https://account.windowsazure.com/PreviewFeatures)?
    Also, you can now try creating the File share via the Preview Portal (https://portal.azure.com -> your storage account -> "File Shares").

  • Remote name could not be resolved in App but MobileService project connects ok

    I have a mobileservice project that runs fine as a Web client. But if I use the MobileServiceClient reference in my Universal app I get "The remote name could not be resolved". 
    In the client Phone app written in c#, I have the auto-generated MobileServiceClient in App.xaml.cs. Then I get a reference to IMobileServiceTable using App.myClient.GetTable call to get a reference to service table. Afterwhich I make a call 
    List<MyData> items = await myClientDataTable.Where(
                    MyData => MyData.Id == 'some id'
                ).ToListAsync();
    The error 'The remote name could not be resolved'. Which doesn't seem right as the mobileservice project runs fine as a Web client. By web client I mean, if I F5 on the MobileService project it runs in the
    web browser where I can add and retrieve data.
    Any help appreciated!

    T.,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

    Hello all,
    Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
    Time Capsule won't backup if Modem (Motorola SB6121) attached
    This was on Feb 10th resolved. Few days later I upgraded to Yosemite.  Backups were working fine since.  
    Yesterday I happen to notice my last backup was 5 days ago.  I looked in the console logs and saw:
    2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
    2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
    2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
    2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
    I called Apple.  Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
    But the next hour it failed
    Called Apple again, this time to Sr Advisor.  He suggested factory reset of the TC and set up again.  Also first backup worked then rest failed
    Third call to Apple useless also.  He was asking questions I didn't feel relevant.  He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
    I begged him to collect data to submit to engineering, which will take days to get a reply.
    So I thought I would throw this out to the community....
    TC Is NEW (replaced from last issue).  Mac is 8 months old (iMac 27"), Os is Yosemite,  TC also new (latest model)
    Thanks...

    Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
    Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
    This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • The remote computer could not be found. please contact your helpdesk

    RDS Farm set up as follows 3- RD Session Host/Web servers set up as network load balanced  and 2-RD Connection broker servers set up as clustered servers. I access the RdWeb farm from the internet via VPN clientless. I can get into
    RdWeb with no problems, however I have few clients that can connect to RdWeb portal but once they open any application icon the error gets displayed "the remote computer could not be found. please contact your helpdesk ".  The client
    pc is Windows 8 with IE11 and Windows 7 with IE 10.  I could not find anything that related to some users that could not connect. Help!

    Hi,
    Firstly please provide some more information from your side.
    1.  Does the other user can able to work properly without any issue?
    2.  Did you install the RD gateway role to allow the external user to access the internal resource? If so, please help to make sure you configure the FQDN for the RD gateway, and the external users can resolve this name on the internet.
    3.  Can you telnet the RD host server (like telnet server name 3389) to check whether the RD host server is available for another server?
    4.  Did you try to temporarily disable all of firewall and anti-virus to test if this issue persists?
    You can configure RD Web Access behavior on IIS manager as per below.
    IIS Manager Console > Default Web Site > RDWeb > Pages > Application Settings > DefaultTSGateway > add the "FQDN of the Remote Desktop Gateway"
    After finishing all above steps, please launch the RemoteApp again to see if the same issue still exists. For more information, you can refer beneath article.
    Configure Remote Desktop Web Connection Behavior
    Hope it helps!
    Thanks.

  • Windows VPN: Error 720 - A connection to the remote computer could not be established

    Dear all
    I have a windows7 Laptop 64bit Dell 1340.
    I was working with a UMTS card, was connected with a VPN to a windows 2003 server over PPTP and experienced a bluescreen. After this, I have the following errors when connecting to the VPN:
    "Registering your computer on the network... Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection"
    and in the event view I receive the following:
    EventID: 1, Source RasSstp
    CoId={A3478DFD-FFA4-4E8F-9DA3-CE829BDA777B}:The initial Secure Socket Tunneling Protocol request could not be successfully sent to the server. This can be due to network connectivity issues or certificate (trust) issues. The detailed error message is provided below. Correct the problem and try again.
    I tried to use the Rarepair.exe tool but it looks to work only on windows xp. I deleted the IP and TCP settings without any luck.
    I run a registry cleaner as well with out any luck.
    Your help will be greatly appreciated!
    Marc

    Hi,
    Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
    If system restore doesn’t help, please also try the following:
    1.    Check if you can establish the VPN via other connections except the connection through the UMTS card.
    2.    Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
    Netcfg -u MS_L2TP
    Netcfg -u MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
    Then reboot the computer and see how it works.
    Meanwhile, I would like to share the following with you for your reference:
    Troubleshooting common VPN related errors
    Hope this helps. Thanks.
    Nicholas Li - MSFT

  • BB Torch - bluetooth tethering for laptop internet use: "Error 720: A connection to the remote computer could not be establishe​d

    Trying to set up Blackberry Torch for laptop tethering...bluetooth. I have connection/drivers/etc. but keep getting error message: "Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection." Where and what do I chancge setting to so this will work?
     I have synched my phone and laptop wirelessly across other internet connection....just cant get this above to work. Anybody know how to fix this? Thanks!

    Hi,
    Since it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
    If system restore doesn’t help, please also try the following:
    1.    Check if you can establish the VPN via other connections except the connection through the UMTS card.
    2.    Reset the PPTP and L2TP WAN miniport with running the following commands one by one in an elevated command prompt:
    Netcfg -u MS_L2TP
    Netcfg -u MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_PPTP
    Netcfg -l %windir%\inf\netrast.inf -c p -i MS_L2TP
    Then reboot the computer and see how it works.
    Meanwhile, I would like to share the following with you for your reference:
    Troubleshooting common VPN related errors
    Hope this helps. Thanks.
    Nicholas Li - MSFT

  • How to open a Numbers doc after message "The document (name) could not be opened." is received?

    I opened an Excel file with multiple worksheets by doubleclicking on it, saved it as a Numbers file and made lots of changes to it. Now I can't open it at all. All I get is the message "The document (name) could not be opened."
    Any ideas?

    It seems that your doc is corrupted.
    Try to rename it from ********.numbers to ********.numbers.zip
    then double click it
    You will get a new ********.numbers file with the structure 'package'.
    Try to open it by double-click.
    Sometimes it works.
    Yvan KOENIG (VALLAURIS, France) jeudi 22 décembre 2011 13:16:28
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • I can no longer play my music from iTunes on my computer.  i get the error prompt: The song (name) could not be used because the original file could not be found.  What do I do?

    not sure what to add other than to repeat myself.  ive lost ability to play music from my iTunes library on my computer.  Everything is there but i get an error message that says '"The song (name) could not be found.  Would you like to locate it?   Then it gives me the option to locate or cancel.  i can't do that for 3800 songs!!  i have all my music in separate folders by album and all individual selections in an external hard drive.  i can play from there but thats clicking on one number at a time.  i lost my capability in the process of Microsoft correcting a problem with my outlook program.  Why, i haven't a clue.   help!!

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on all my tunes and each one I select ends up with a "?"

    I tried to play my iTunes and suddenly get an error message that says "The song (name) could not be used because the original file could not be found.  Would you like to locate it now?"  It happens on each tune I select and a "?" appears beside the song.  Does this sound familiar to anyone?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • TS4009 The document "Name" could not be opened. (Numbers file @ iCloud)

    I have a file saved at iCloud that can not be opened anymore.
    Numbers says: The document “Name” could not be opened.

    I've solved my problem by following instructions here:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=308&mforum=iworktips ntrick
    Step-by-step:
    1. renamed .numbers-tef file to .pdf;
    2. control cliked - then - Show Package Contents
    3. double clicked index.xml.gz - index.xml has been created!
    4. renamed back .pdf to .numbers
    5. double cliked file and Bingo! Numbers opened the file.

  • Error 720: A connection to the remote computer could not be established.

    So I got an aircard Novatel P720. It was working fine for months. Then I installed a VPN connection. Now, I get this error.
    Error 720: A connection to the remote computer could not be established.
    Most of of what I found recommends uninstalling the WAN Miniport (IP), it seems that  I have to go thru so many hoops to get this fixed. Wondering if I would be better off rebuilding my machine from scratch again. Is there an patch or another way to get me going.
    I think this is an old issue. Lots of comments on this thru Google. I am hoping I can get a definative answer from Lenovo's itself!

    josezald wrote:
    So I got an aircard Novatel P720. It was working fine for months. Then I installed a VPN connection. Now, I get this error.
    Error 720: A connection to the remote computer could not be established.
    Most of of what I found recommends uninstalling the WAN Miniport (IP), it seems that  I have to go thru so many hoops to get this fixed. Wondering if I would be better off rebuilding my machine from scratch again. Is there an patch or another way to get me going.
    I think this is an old issue. Lots of comments on this thru Google. I am hoping I can get a definative answer from Lenovo's itself!
    Well, seeing since your having an Issue with a non Lenovo product. I dont think your going to get an official answer from Lenovo. You may get suggestions however. 
    Ignorance is no excuse!

Maybe you are looking for