Failed to work with DocNav offline

Hi,
I have an offline network that I want to use DocNav on it.
I tried to do the next steps in order to pass the DB to the network, but I had some problems.
I downloaded the hole DB to an internet computer I have as Shared Download.
I copied all the shared download folder from the internet PC to the network.
I replaced the internet PC files path to the network's path in the download xml file.
I copied the xdocs.xml file from the internet PC to my network PC in order to update the catalog.
After that the DocNav was working partiqaly on the netwok PC.
It managed to find some of the files in the network, while others had simbuls of internet access and not "downloaded"
I checked and the file exsist in the network location and in the download XML file.
The catalog in the network PC was not updated.
How can I solve those problems?
I need to have the full DocNav DB on the network for several PCs and I can't manage to get it working.
Thank you
 

Hello ,
Check the following thread:
http://forums.xilinx.com/t5/Design-Entry/DocNav-Catalog-Download/td-p/474002
http://forums.xilinx.com/t5/Installation-and-Licensing/using-DocNav-offline/m-p/477476/highlight/false#M7280
--Syed
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

Similar Messages

  • RV042G fails to work with Public Wan IP when connected to Cisco SG300

    Am using a RV042G with a Fiber Optic connection terminated on WAN1 It was working fine untill received a new IP pool . When we configure with the ip on wan 1 and connect the SG300 the WAN Status shows connected but no internet connection. The wan ip doesnt work. If i replace the RV042G with a Netgear Firewall router The connection works fine with the WAN IP.
    The network connection is very simple. What is that is not letting RV042G work with SG300?

    Hi Tom, Thanks for the reply.
    Yes when I connect a computer directly to the RV042G it works fine but as I connect back the SG300 to one of the ports the Internet goes down.
    The SG300 is not working on Layer 3.
    I tried Different ports but the same result.
    This RV042G was working fine with the fiber optic line, We just requested the ISP to increase the Public IP pool and they Gave us New IP's. Nothing changed Just set the WAN1 to one of the new IP and it fails to work if connected with the switch
    I removed the switch and connected the RVS4000 directly to RV42G and the users of RVS4000 have no issues. Not a single thing has been changed Just the new IP On wan.
    I have upgraded the router, rest  and configured internet settings i.e Changed wan IP but no go.
    Thanks Sachin

  • Working with Windows offline files

    Hello,
    I'm desperately trying to make Adobe bridge and other applications work faster on our company's graphics design team's computer. They work with files off a company NAS drive and loading and saving files is slow. I've enabled Windows offline files for the entire folder containing their work and synchronised it to a test computer; all their files are now also stored locally. However, they're reporting that Bridge loads even slower than before. I'm out of ideas; those files need to be available to all 3 members of our design team but I still need to make loading and working with said files faster.
    Does anyone have any ideas or has anyone else tried adobe products with Windows offline files?

    You can check some tools mentioned in this URL : http://www.hongkiat.com/blog/backup-and-sync-tools-for-hard-drives/
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • HP Laserjet L6 fails to work with Win8.1

    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-LaserJet-6L-won-t-work-with-Wind... suggests that improvement comes from getting a driver WITHOUT the 'PS class driver' part in the name. I have experienced the same failure with BOTH drivers - that neither 'test page' nor 'document' prints, but instead, a variable set of other images; moreover just inserting paper triggers printing . As for appropriate connections - my PC DOES have a printer port and the printer does NOT have a USB port, so I have left the parrallel-port cable in place.  If I put back the hard drive with the WinXP system, the printer works fine, suggesting that the cable is adequate. So what other tweaks can I try  to regain full functionality of a fine printer ?

    Hi @Sebastian43 
    I suspect your question would be better answered in the HP Enterprise Business Community,  as the HP LaserJet 6L is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging.  When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP LaserJet 6Lse Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • ATI display driver fails to work with new kernel

    Hi,
    I've just upgraded from
    OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64
    to most current
    OEL kernel-2.6.18-194.11.4.0.1.el5.x86_64
    and got the problem with ATI display driver. Whenever I perform kernel upgrade, I have to recompile vendor-provided ATI display driver downloadable from AMD/ATI site, because system ATI driver, provided by OEL/RHEL as kernel module, doesn't work properly (too slow). I did that hundred times and never had a problem. This time the problem is that after upgrading to new kernel and recompiling the existing ATI display driver (Revision 10.8), it doesn't work anymore, even though it worked perfectly with previous kernel. I cannot even start X11 (glibc problem reported with stack traces!!!). The newest ATI display driver (Revision 10.9) "works" with new kernel, but display is awfully slow making any serious work impossible. It is even slower than system-provided ATI driver.
    I am pretty sure the problem is in new kernel. As I have no backup of old kernel files and couldn't download the previous OEL kernel files from ULN, neither binary nor source (the files do not exist on ULN anymore, only the recent kernel files), I downloaded the previous kernel source from ftp.redhat.com, compiled the kernel and downgraded to it, recompiled ATI display driver, and everything works properly and fast as before upgrading. I can remember that ULN site used to have all kernel versions prior to actual one and cannot understand why Oracle dropped this practice. As I have an ULN account, I certainly want to have OEL patched kernel.
    My question is: does anybody know how and where I can download the previous OEL kernel-2.6.18-194.11.3.0.1.el5.x86_64 binary rpm files or at least source rpm file?
    Maybe Sergio or Tommy can help?
    Thanks in advance.
    NJ

    I have experienced the same with Ubuntu some years ago - specific feature (hack?) that was implemented in the kernel was deprecated. This was used by the display driver for an onboard Intel graphics chipset. Beryl (which was subsequently merged with Compiz) turned into a horribly slow experience. As far as I recall, a subsequent kernel patch "fixed" things as a number of users were affected, of which many complained very loudly.
    Anyway, I think the lesson here is that OEL is not really the correct distro to use for a desktop. A broken ATI driver for the OEL kernel? Does not really feature in the scheme of things for OEL support. Oracle Grid/RAC/Enterprise/Standard Edition do not care. Oracle's application servers (Apache, Weblogic, etc) do not care. Etc.
    Sure, GUI desktop access to an OEL server is needed (like when running dbca or an installer) - but that can easily and effectively be done using vncserver for example and running twm.
    You may be able to fix/work-around the problem with the current kernel update.. you may be able to roll back the update. But what about the next time when some other component does not work after a patch or an update? Surely it is a lot less stressful and frustrating to rather use a desktop distro, like Ubuntu, instead?

  • Expose / Spaces function(s) fail to work with mouse buttons, ongoing issue

    Please see this now very old thread:
    http://discussions.apple.com/thread.jspa?threadID=2131775&start=0&start=0
    This is an issue as old as snow leopard itself. The problem varies in that it can effect spaces or expose. When using a non-apple mouse, one or more of these functions will fail to perform with a mouse button indefinitely as soon as a restart has taken place.
    In my particular case, whatever mouse button I assign to "show desktop" fails to function entirely after a restart has taken place. This remains true even if I re-apply the setting in system preferences, such as changing it to another button, or changing it to nothing, and back. I can still use keyboard shortcuts and screen corners to activate "show desktop". I can continue to use other expose and spaces features with the properly assigned mouse keys. Only one feature, in my case "show desktop", fails to function with -any- mouse button after a restart.
    To make this even more clear, this behavior has remained the same and consistent for the 14 months I've had snow leopard. It has even continued to exist after I recently removed and recreated my HFS+ partition, and re-installed OS 10.6, entirely from scratch. It did not exist whatsoever for the year and a month I had OS 10.5 leopard, before upgrading to 10.6. This behavior was +literally introduced upon installing snow leopard+. I have a razer death adder 1500 DPI mouse.
    Several others share the exact same symptoms, with only the affected expose/spaces function and mouse model differing. A sibling of mine experienced the +exact same issue+ with an entirely different mac model and the exact same model of mouse.
    As a relatively unimportant aside, certain "tricks" seem to fix the issue, but only temporarily (one involves moving the location of spaces and/or expose out of the utilities folder, another involves deleting "com.apple.symbolichotkeys.plist" from ~/Library/Preferences). Unfortunately, these tricks:
    A. always only fix the problem temporarily, the issue returns
    B. do not address whatever is causing the issue in the first place
    This is really frustrating quite a few people, as the linked-to thread can attest to. Along with the obvious, this frustration is magnified because:
    A. This issue +does not appear+ to involve terribly challenging technical difficulties (i.e., merely mouse button behaviors).
    B. This issue did not seem to exist before OS 10.6.
    C. This issue, with the previous two points above in mind, has remained unaddressed for 14-plus months - the entire duration of Mac OS 10.6 snow leopard. I myself originally figured a reasonable time for this issue to be addressed & resolved would be a matter of +a few days+, weeks at most, and at the very least, thought I'd be using these beloved features again +well over a year ago+.
    To put it frankly, what the %$#&? Why hasn't this been addressed yet?
    Message was edited by: -DrD-
    Message was edited by: -DrD-

    Anyone even care? I submitted this as feedback to apple, and haven't got a reply through that route, either.

  • QuickTime fails to work with videos on Apple's site

    QuickTime refuses to run videos on Apple's web site. Clicking on the video link, QuickTime is opened, but the usual logo is overwritten with a big question mark & the video refuses to run. I am running QuickTime 7.5.5 on a MacBook Pro 15" 2.4 GH, OS !0.5.4, but the same thing happened with the previous version of QuickTime on the same machine & version of 10.5. Ironically, videos on all other sites run perfectly, but not Apple's.
    Has anyone else run into this problem? And found a solution? I'd be grateful for your help. Thanks in advance.

    Thanks for your suggestion, groovyds, but it didn't help. I can be a bit more specific now. It doesn't do it with the Mac ads (I am a Mac & I am a PC), but just with the tips & tutorial videos. The problem began on OS 10.5.4, but has continued on 10.5.5. If it is only doing it on Apple's site and only with the tips & tutorials videos, then that should suggest that something in those videos won't work with the combination of QuickTime + MacBook Pro 15", 2.4 GHZ + OS 10.5.4 & 10.5.5 (and who knows how far backwards in OS 10.5 versions or forwards in future versions for that matter). Again my thanks.

  • Airport Express fails to work with Win Vista

    Ive got a 802.11 n airport express.
    My girlfriend's laptop with windows vista becomes disconnected with internet every hour. However, It shows in the tool bar that the laptop is connecting to the internet, while the MSN messenger and IE browser fail to connect to internet. She has to disconnect from internet and reconnect. Then it works for a while, then fail again.
    Meanwhile, my macbook pro, which is also linked the airport express, works properly. It never failed to connect to the internet.
    Can anyone plz tell what is goin' on? How can I solve the problem?

    when was the last time the express worked fine?
    ok, so hardwired into the 6121, that computer works fine, right? try these exact steps esp the reset
    unplug modem and leave off for 5 minutes, while you're waiting plug a eth cord from modem to the WAN (circle icon) port of the express
    keep express unplugged and hold in reset button and don't let go
    plug power back into express and only release reset when amber light flashes after 10-20s
    give it a minute, hopefully you'll now see a green light on the express
    fire up airport utility and proceed to 'create a new network' - you may see your device under 'other wifi devices' in the utility or you'll have to manually connect to it by clicking on the wifi icon in the OSX title bar and selecting the reset name of your express (something like express 342sdaf32)

  • How to work with KM Offline Tool- Portal Drive

    Hello,
    I have installed KM Offline Tool -Portal Drive. How does that work?Can anyone please explain me in detail.
    Thnx in Advance
    cheers
    murali

    Hi Murali,
    ... as well as http://help.sap.com/saphelp_nw04/helpdata/en/42/e6753939033ee5e10000000a1553f7/frameset.htm and http://help.sap.com/saphelp_nw04/helpdata/en/42/c99b91341a6bade10000000a1553f6/frameset.htm
    Hope it helps
    Detlev

  • Does the Roboform plugin still fail to work with the new upgrade?

    Roboform disappeared with new upgrade. I went back to old version. WORKS fine...

    Yes, thank you for your help and assistance. I tried the upgrades and now Roboform wants me to purchase the latest version. So, I uninstalled and went back to the original setup. Same problems occurred when I purchased a new laptop using Win Vista Ultimate. Some of my external hardware stopped working. Can't get drivers. Buy new hardware to support the unnecessary Win operating system changes? When will it end? WIN 8? I think not.

  • World of Warcraft Wireless Headset fails to work with Xbox360 wired controller

    Hey all, i've experienced a rather unique problem ever since the original release of the WoW wireless headset.
    It works perfectly (Great headset, by the way, except for this one huge issue.) normally, however, upon plugging a Microsoft Xbox 360 controller into another USB port, the sound goes out on the headset.
    This problem has existed for me since the original commercial release of the wireless headset. Back then, I opened up a ticket, but didn't really get any help on the issue. The support tech just told me to update my drivers and firmware, despite me already having done that. Eventually, I gave up on trying to fix the issue, since I felt I didn't really have enough games I played on the PC to justify bothering with this bug anymore.
    Unfortunately, with the holidays coming up, things have changed, and I was looking to get some help on what the cause of this might be, and how to fix it.
    I should mention that the headset works perfectly in conjunction with the controller, on my laptop, which runs Windows 7. The computer that has the problem in question runs Windows XP.
    I've checked the audio output, and, after plugging the controller in, the headset is listed as the audio output option. In addition to that, with some jury rigging (Rebooting the computer after plugging the controller in, for instance.) I can get limited sound. However, it is so staticy, extremely low quality, and crackly, as to be almost physically uncomfortable to listen too. Nevermind actually being able to discern what it is i'm actually listening too.
    I also have a surround sound system plugged into my computer. I originally assumed that this might be the problem. However, I recently had to move my computer, and the surround sound system is not currently plugged into the computer. The headset still does not work on XP when the 360 USB controller is plugged in.
    This problem has persisted beyond a wipe of the hard-drive and re-install of the OS, as well.
    Has anyone else experienced this problem, and been able to fix it?

    You might want to:
    . Uninstall the headset, make sure all related applications are removed.
    2. Perform a clean boot of your system
    3. While your system is in it's clean boot state, reinstall the headset.
    Do test the headset with a different USB port on your main computer to see if it makes a difference. Hope this hel
    ps.
    Customer Support can be contacted using this email form if you require further assistance.

  • Presenter 8 video record fails to work with firewire camcorder

    Tried to record with camcorder connected via firewire. Presenter video creator crashed. Poor results for a highly anticipated "upgrade". Problem with installed "Adobe-Pr-VC.exe" app. Wish that Adobe would test their products instead of having us doing their Quality Control. But, I guess this is what they would describe as being a "feature". Glad I'm finding all these problems during the "trial" period.

    Hello Bill,
    I reported a similar issue on August, 9 :  "Presenter 8 crashes after connecting external Firewire cam"
    ("http://forums.adobe.com/message/4609394#4609394")
    The lack of support for FireWire connections is making the product less usefull than I tought it would. We also record conferences and corporate training presentations, and recording the speaker with just a low quality webcam is not always the best option (limited options of framing, zooming, panning, tilting, following the speaker ... they are not always standing on the same spot ).
    Being in the "trial" period still, I digitized and copied a pre-recorded videofile of a recent presentation on my PC and tried to synchronize it with the PowerPoint presentation, but then I found out that I need to split up my complete recording in as many individual pieces of video as the amount of slides the speaker presents. Presenter only allows to import and synchronize one videofile with one particular slide. This type of post-processing is time-consuming and inefficient.
    I also can't ask the trainer to do his/her presentation in a classroom first before an audience, and then repeat the whole presentation again afterwards in front of his/her webcam to record it to make it available for people who couldn't attend the session.
    That is why the connection of an external camera or recorder is a necessity. There is nothing as easy and efficient as having a camera at the back of the class or conference room, and synchronize the camera image with the PowerPoint slides in real-time, while the speaker is presenting the slides before an audience. We simply don't have the time to go through a time consuming post-processing cycle by cutting the recorded presentation into several individual videofiles and importing them into the individual slides, or asking the speaker to repeat the presentation for the 2nd time in front of a webcam.  Time is Money.
    I also found out that only presentations recorded in real-time with a webcam (via the RECORD button on the toolbar) gives me the possibility to upload the presentation to YouTube. When using the possibility to import a videofile to a slide via the Presenter toolbar (Video --> import), it only gives me the possibility to publish to My Computer (or network), to Adobe Connect or to a PDF-file.  No YouTube publishing possibility here anymore.
    Why not, Adobe ?
    Company policy to only connect to the proprietary Adobe Connect platform?
    That is a real pitty.
    I really don't understand Adobe's policy to not support FireWire appliances in Presenter 8.  This would open so many possibilities for the product.
    FireWire support is nothing new for Adobe. I'm an Adobe Premiere user for more than a decade, I use Adobe Flash Media Live Encoder to stream training sessions, conferences, etc ... and all these products support FireWire without any problem.
    Don't tell me that the Adobe team needs to start studying for months how to connect a FireWire camera or recorder to its Presenter 8 software.
    I hope they will investigate how they can solve this flaw as quickly as possible.
    In the meanwhile, I guess, I will let the trial period pass and might consider purchasing the product once this issue has been solved.
    Regards,
    Patrick ROTEN
    CIPAL
    Governmental ICT Agency
    Dept Marketing & Strategy
    (Belgium)

  • Serial number of CS4 fails to work with Acrobat.

    I bought CS4 from the University of Alberta some years ago.  Now I wish to install on anew computer.  No problems with AI, ID and PS.  Acrobat Pro doesn't accept the serial number.  How do I get a valid serial number.  The version number is 9.0.0
    A similar case is documented here:  http://forums.adobe.com/message/6046274
    Without a helpful answer.
    Do I expect to be able to install a several year old product. Yes.
    Do I want to upgrade?  No.

    Hello?  Anyone home?
    I was on chat with Adobe for 2 hours over this.  They told me eventually that live help was unavailable for this, that I had to go online.
    So I have and so far, no replies.
    Have I asked my question incorrectly?

  • Working with offline photos

    I have relocated some photos using "Relocate Originals". When they are offline, meaning when the relocated photos are saved in an external hard drive and the drive is not connected, how should I work with those offline photos? For example, is it okay to rotate photos? Is it okay to move offline photos to another folder or project? If I do these, when I reconnected the external hard drive, what would happen?

    You cannot make adjustments, print, or export Images whose Originals are off-line.
    You can move them within Aperture; assign ratings, keywords, and any other metadata; and export the Image's Preview.

  • XML parser working with MediaWiki API

    I have a little helper for a MediaWiki server. It intended to work the following way:
    Client side [GWT] ←rpc→ Server side [GWT] — JWBF ←http→ MediaWiki API+
    GWT - Google Web Toolkit 2.0.4
    JWBF - Java Wiki Bot Framework 1.3.2
    MediaWiki 1.16 XML
    JDK1.6.0_21
    GWT sends and receive utf-8 data between client and server well. But the second half fails to work with its own xml traffic.
    JWBF gets the xml file via HTTP (log4j logging):
    [DefaultClientConnection  ] Receiving response: HTTP/1.1 200 OK
    [headers                  ] << HTTP/1.1 200 OK
    [headers                  ] << Date: Thu, 09 Sep 2010 17:36:34 GMT
    [headers                  ] << Server: Apache/2.2.4 (Win32) mod_ssl/2.2.4 OpenSSL/0.9.8e PHP/5.2.4
    [headers                  ] << X-Powered-By: PHP/5.2.4
    [headers                  ] << Cache-Control: private
    [headers                  ] << Vary: Accept-Encoding
    [headers                  ] << Content-Length: 1177
    [headers                  ] << Keep-Alive: timeout=5, max=95
    [headers                  ] << Connection: Keep-Alive
    [headers                  ] << Content-Type: text/xml; charset=utf-8
    [DefaultRequestDirector   ] Connection can be kept alive for 5000 ms
    [wire                     ] << "<?xml version="1.0"?><api><query><pages><page pageid="103" ns="0" title="Bronenosets Potyomkin"><revisions><rev revid="503" parentid="502" user="Anton" timestamp="2010-09-09T09:26:34Z" comment="Undo revision 502" xml:space="preserve">[\n]"
    [wire                     ] << "The Battleship Potemkin ([0xd0][0x91][0xd1][0x80][0xd0][0xbe][0xd0][0xbd][0xd0][0xb5][0xd0][0xbd][0xd0][0xbe][0xd1][0x81][0xd0][0xb5][0xd1][0x86] [0xc2][0xab][0xd0][0x9f][0xd0][0xbe][0xd1][0x82][0xd1][0x91][0xd0][0xbc][0xd0][0xba][0xd0][0xb8][0xd0][0xbd][0xc2][0xbb]) is a film.[\n]"
    [wire                     ] << "[\n]"
    [wire                     ] << "The Odessa Steps sequence editing.</rev></revisions></page></pages></query><query-continue><revisions rvstartid="502" /></query-continue></api>"
    [SingleClientConnManager  ] Releasing connection org.apache.http.impl.conn.SingleClientConnManager$ConnAdapter@dfb098And Java XML parser fails to understand this xml and returns the string as it was ISO-8859-1. After the xml bases a class with SAXBuilder, name in brackets, the one within "rev" element, becomes:
    БроненоÑ&#65533;ец «Потёмкин»while it should be
    &#1041;&#1088;&#1086;&#1085;&#1077;&#1085;&#1086;&#1089;&#1077;&#1094; «&#1055;&#1086;&#1090;&#1105;&#1084;&#1082;&#1080;&#1085;»The whole system (Apache, MediaWiki plus JWBF, GWT, client HTML) is set to utf-8, but Java parser (default settings) still does not agree.
    Dear specialists, where could be the error?

    The problem's been found thanks to DrClap ( [XML converted to string - encoding lost?|http://forums.sun.com/thread.jspa?threadID=610257] ).
    JWBF read the HTTP stream using system's default encoding:
           +Line 216 in jwbf-1.3.2-262\src\net\sourceforge\jwbf\core\actions\HttpActionClient.java+
    BufferedReader br = new BufferedReader(new InputStreamReader(res.getEntity().getContent()));From here the whole chain got the wrongly encoded string, including XML parser.
    So, the solution is to define the encoding explicitly:
    BufferedReader br = new BufferedReader(new InputStreamReader(res.getEntity().getContent(), "UTF-8"));Thank to the community.

Maybe you are looking for