Failed update install
why do hp updates fail to install properly so often. AMD graphic driver has failed to install 8 times since it was received as part of an update package last night
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer's HP updates fail to install properly, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on HP PCs - Troubleshooting HP Support Assistant (Windows 10, 8). This should help to correctly install any applicable HP updates on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
Similar Messages
-
After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.
Click here and follow the instructions.
(98815) -
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Symbian Anna update 1/2 failed to install
The story so far. I did the first round Anna update (around 27 mb i think) OTA cos my Ovi Suite never able to update firmware on my n8 since trying to update it to PR 1.2, and I did try reinstalling, redownload, reboot PC, reg clean, ccleaner to fix the Suite but it still do not update my firmware at all. But that's another story.
So I installed the 1st round, n8 rebooted to white screen, rebooted into homesceen with Midnight theme. SW update then shows 4 more items: Anna update 1/2, 2/2, Store and Social. The 1/2 was showing around 20++ mb. So I selected all 4 and update. Halfway through the installing process of 1/2 update (note the download part of 1/2 was very fast), I did plug in the power pin, cos the installation process was damn slow for 1/2. I did not notice wheher it finised installing cos later i checked it was already on 2/2 (downloaded and installing). It then went to the last two items and installed ok.
Rebooted device, but SW update still showed Anna update 1/2 available (the only one left) and the download size is now 7166 kb. I proceed to update it, it failes with error but no error codes or any message what was the error about. I tried again and again, with fresh reboots, still failes. What gives?
Even more, split screen not here. I did the uninstalling Swype, activating qwerty mode in portrait, still no split screen. I do not have any Betalabs apps.
My Quickoffice & Reader is not here anymore (the app manager not showing them too). Heck I bought the full ver of Quickoffice 6 last time. Wat a waste of my money now that ver 7 is out!!
Anyone knows how to delete the "dowloaded cache" of SW updates? I want to force SW update to redownload this 1/2 item to try fix this issue.
Thanks for listening and please help. Cheers!!
Solved!
Go to Solution.I got the same problem since this morning on both my N8 & just found out solution on a previous update error similar to this & completed the update on one of the N8. Re-trying on another one.
Working Solution for failed update was found on Flashism's website quoted & "touched up" per below:
Big thanks to user “Unick” on Nokia Support Forums, who posted a working solution to the problem, and there are couple of successful installs reported from the solution.
I just deleted folder E:\Private\20019119\. After that I ran SW update on the phone & it restarted download of Symbian Anna Update 1/2 & 2/2 as well as Social, they finished updates successfully.
To delete the mentioned folder, follow these simple steps:
• Connect your Nokia N8/C7 in Mass Storage mode to PC via USB cable
• Locate and delete folder named “20019119″ under \Private folder of Mass Storage
• Unplug the device from PC, and retry again. It should work.
However, I still got no popup split keyboard after completing the updates & restarted the phone. -
Apple's latest update to iTunes failed to install on my computer with Windows 8.1 64 bit. I have reinstalled in many times, removed Itunes via Control Pannel, etc. etc. No luck. Tried to go back to an older version, but all of the installs try to install the latest version. I suspect there is a problem with this update and vesion.
Solving MSVCR80 issue and Windows iTunes install issues.
-
HP Updated USB and wireless Lan Failed to install
my USB Hard drive cant be found and i've noticed the Intel USB 3.0 extensible host controller FAILED to install the update , and also the Ralink Wireless network driver update / LAN also failed to install , i have tryed other USB hard drives and they also cant be seen , whats the fix for this Please , Thanks
This question was solved.
View Solution.Hi,
Happy Computing!
Jaco
Errare humanum est. -
Update KB2685811 fails to install on Windows 7 64bit
Update KB2685811 fails to install on Windows 7 64bit FROM WINDOWS 8.1
Hi,
Based on my research, this update package only applies to Windows 7 and Windows server 2008 R2. Windows 8.1 doesn't support this update.
If you need any further assistance, please feel free let us know.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?
Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
Server 2012 (not R2) RODC fails to install Windows Updates
Good morning all
Since around October, our 80-odd 2012 (non-R2) RODCs have been failing to install windows updates, rolling them back on reboot. Patches that don't require a reboot are fine. The short version is, please log a call with MS and reference this thread, if you're
having this issue as currently they're saying they won't fix this!!
Our product support group opened an official case and reported this with Microsoft and they've found the cause. PLEASE NOTE however, that this relates to RODC and ALL patches failing, not just 3000061 on non-RODC.
There was some chat relevant to this as originally it was thought KB3000061 was to blame, and a few other people had had the same issue there (see links at the bottom). I think however, that this issue now stands alone as any patch we try to install will
fail.
000093 2015-01-23 20:18:30, Info CSI 00000015 Begin executing advanced installer phase 38 (0x00000026) index 4 (sequence 43)
000094 Old component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000095 New component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.17100, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000096 Install mode: install
000097 Installer ID: {118ca598-79a0-4297-953d-e82183960fd2}
000098 Installer name: [13]"Group Trustee"
000099 2015-01-23 20:18:30, Error CSI 00000001@2015/1/23:20:18:30.673 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000100 [
000101 (null)
000102 ]
000103 [gle=0x80004005]
000104 2015-01-23 20:18:30, Error CSI 00000002@2015/1/23:20:18:30.673 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000105 Element:
000106 [372]"<groupTrustee xmlns="urn:schemas-microsoft-com:asm.v3" name="WinRMRemoteWMIUsers__" description="Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user." type="User" enabled="true">
000107
000108 <members></members>
000109
000110 </groupTrustee>"
000111 [gle=0x80004005]
000112 2015-01-23 20:18:30, Error CSI 00000003@2015/1/23:20:18:30.673 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED).
000113 [gle=0x80004005]
Cause:
The installer uses SAM API calls to manage the group. It always connects to the local SAM instance. The component also handles an uninstall task in the same function. On uninstall the group is being deleted.
So the SAM handle is requested with "Create Group" and "Delete" access.
The error happens because a RODC does not allow any changes and thus returns STATUS_NOT_SUPPORTED.
More information about the prevent from accidental deletion feature please refer :
http://technet.microsoft.com/en-us/library/cc773347(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc739350(v=WS.10).aspx
Recommendation:
This is a Bug in the RODC running on server 2012, However you may do an in place upgrade to Server 2012 R2 and then proceed with the installation of the patch.
The bad news is this is fixed in 2012 R2 with a hotfix - but it isn't fixed in 2012 and it won't be because.. they've only had one official report logged. And that was by us. So, if you want this fixed, you need to start logging this with MS now.
What I can say just now is that this isn't related to the registry fixes with WinEVT we've all been trying, it's NOT limited to 2008 that has been upgraded in place to 2012 (our product support group replicated it in the lab with a brand new 2012 promoted
to RODC) and it IS only happening with RODC. Possible fix might be to make your RODC RW for a bit and install your patches then.
Background reading:
https://social.technet.microsoft.com/Forums/en-US/f77691d8-a9d0-4714-98ad-71665cfa8965/kb3000061-fails-to-install-on-server-2012?forum=winserver8gen
https://social.technet.microsoft.com/Forums/en-US/70219bcb-36a8-466e-900b-cbf390db38d2/failure-configuring-windows-updates-reverting-changes-postreboot-status-0x800f0922?forum=winserver8genThe error indicates that IIS is returning a "404 not found" error back to the Windows Update Agent. That might mean that you need to specify the correct port that WSUS is listening on, e.g.:
WSUSServer=http://yourserver:8530
Thanks,
-Michael Niehaus
Senior Product Marketing Manager, Windows Deployment
http://blogs.technet.com/mniehaus
[email protected] -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
G500 win8.1 window updates failing to install.
I recently purchased a Lenovo G500 in France (intel I7 2.2 ghz, 4gb ram, 500gb) with Windows 8.1 as the OS, and just got the Internet back last wednesday, so April 30th.
Since then, I've had a total 3 microsoft updates, which in and of itself is not terribly interesting, except that two of these three updates have failed, leading to the following message:
"Failure configuring Windows updates. Reverting changes. Do not turn off your computer"
Obviously in French, but that's the translation I got anyway.
So here's my question: How often does this happen? Microsoft's site tells me to wait for about 30 minutes while it resolves, but the first time it took me close to an hour (and after the 3rd restart after it showed me this, I manually turned it off after it shut down and then it installed properly). The second update worked fine and I had no problems (albeit it took well over 30 minutes to install though), yet the third (this morning) also failed to install (but this time it took less than 30 minutes, although I noticed it froze on the lenovo screen after a restart, where the "loading" circles didn't show up, although I don't know after which restarted this occurred, as I had left it to run its course while I ate breakfast).
Now that I think about it, the first update error occurred after a system error which required a restart (cause unkown, some kind of error along the lines of 0x0000000A, but I found nothing I I'm guessing I didn't see correctly), and last night I noticed my laptop had frozen when I close it, so I manually shut it down. Coincidence? The second update worked fine, and it was the only time I had maually selected restart and update, so this could be a plausible theory, although I have no idea why it froze last night. Maybe I closed it too quickly after closing chrome (although I have no idea why this would cause a freeze...).
So my questions are as follow: Has this happened to any win 8.1 users, are your updates abnormally long (well over 10 minutes), do they occurr extremely frequently (every 2-3 days, if not every day), and what could the causes be for the failure to install/reverting changes issue?
Thank you in advance for any help.There are lots of possible reasons. Other programs interfering, insufficient permissions, AV blocking, – the list is endless.
I could say do a forum seach but that facility is as useless as the Adobe installers.
Have a look here: http://kb2.adobe.com/cps/408/kb408524.html -
When I updated to iOS 8.1 on my iPad 2 it failed when installing it's in recovery mode and when I go to iTunes to restore it downloads the update to about 900 Mbps then gives me error 9006
Hi Willy,
Welcome to Apple Support Communities.
The article below provides information about specific update and restore alerts, including the 9006 alert that you saw when attempting to update your iPad 2 to iOS 8.1. Try using the instructions provided to see if the issue is caused by a conflict with the security software on your computer.
Resolve iOS update and restore errors
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
I hope this helps,
-Jason -
I bought a new iMac 27" yesterday, running with Mavericks OS. Attempting to download Adobe Creative Suite 5 Design Premium. Loaded software from discs. When I check for updates they fail to install. A window comes up saying "Some updates failed to install." Then under each applications it says "There was an error downloading this update. Please quit and try again later." Have done this several times. Suggestions?
update manually,: http://www.adobe.com/downloads/updates/
-
Adobe application manager fails to update/install
Please help me resolve this error and update App Manger properly.
I have downloaded and am running Creative Cloud CS6 versions of Illustrator and Photoshop that I installed back in Decmember. Now I'm trying to download more applications and am encountering this error:
I click 'download' on InDesign (for example)
Download initiates launch of Application manager, App manager opens main window then "initializing installer window"
Application manager flashes this warning for a split second: "other instances of adobe application manager are currently running which must be closed before installing this product. Please close or wait for them to complete." (see image). This warning closes on its own after just a second.
Then it continues to install for a few minutes, asks for my password then fails with the message, "We've encountered the following issues, Adobe Application manager failed to install" (no error number, see image)
Photoshop and Illustrator still run fine, but none of my Adobe apps (including Air) will update properly now. I have tried deleting the App Manger files from applications > utilities and re-installing, but that also creates an error.
I have searched for duplicate app manager files but have come up empty. I've run the support advisor app and it checks out fine. I have a token from that if it helps.
I'm running iMac 10.6.8 and I also have CS5 installed on this computer if it makes a difference.
Any help would be appreciated. I'd like to be able to run the apps I'm currently paying a monthly fee for.I'm going to write this information cause it was so darn frustrating and after two days I finally got it - so here goes - resolution:
I'm running windows 7, and was trying to download cloud which apparently I was forced to do based on my subscription base (was on CS6 before that)
Step 1: start task manager and close ALL adobe running apps including akami session
Step 2: click on the windows icon and type in search bar %appdata%, enter
Step 3: in browser bar above of folder, click on "appdata" (my file directory when i typed step two was C:\Users\study\AppData\Roaming, and I need to be be at C:\Users\study\AppData)
Step 4: Click Local, then Adobe, then oobe, delete the oobe file
Step 5: Go the the following to download the "cleaner tool": http://download.macromedia.com/pub/creativecloud/cleanertool/win/Adobe_Creative_Cloud_Clea ner_Tool.zip
Step 6: Unzip the file and click on the AdobeCreativeSuiteCleanerTool.exe, that was in my directory as follows (dependent on where you download and unzip of course) C:\Users\study\Downloads\adobe_creative_suite_cleaner_tool (1)\win
Step 7: select (e) in the black box for "english", select (y) for yes, select creative cloud (whichever option # that is) and again anything with creative cloud (this did NOT delete my other adobe files, which I feared may - but I was simply instructing it to clean/delete the creative cloud.
Step 8: close the black window
Step 9: Click here: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773 and download the creative cloud adobe application manager
Step 10: Run the application
Step 11: Log in and download the software you want
If that doesn't work, what I did is between steps 4 and 5 I restarted my computer, then I went into task manager and closed all adobe apps. I'm not sure I had to do this step but I was desperate after 2 days doing whatever. Each tech person gave me different information. The last person helped me best, but I spoke with her via chat AFTER I had rebooted the computer. If you need support click http://helpx.adobe.com/contact.html and I personally did the "chat" so I wouldn't have to wait.
Hope this helps anyone who hasn't figured it out! -
I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?
Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh
Maybe you are looking for
-
Intel iMac stuck at desktop screen, no menu bar, no finder, spinning ball
Hi, I've just run into a serious problem with my 24" Intel iMac not starting up properly. At first it was getting stuck on the gray screen, then I got it to the blue screen, and now finally I can get it as far as loading the desktop picture, the curs
-
Load .bmp file into BLOB column in 9i - how to?
Hello all, How do I update a table with a BLOB column with a .bmp file in 9i? I tried using the DBMS_LOB package but got a ORA-06502: PL/SQL: numeric or value error: invalid LOB locator specified: ORA-22275 (and since there is more native support in
-
Unable to send or receive text messages after apply s/w update on Q10
After apply software release 10.1.0.4181 (size 6mb) on my Q10, I can no longer send or receive text messages, pls help. At first I thought the text messages were only collapsed, but I am unable to send, receive or open any previous chat. I have reboo
-
Why are some items on the purchased list duplicated
Why are some items on the purchased list duplicated
-
Calculate incentive and reimbursement of employee?
Hi all, I want to calculate the incentive and reimbursement for the employee. I am having various g/l account no.s separately for incentive and reimbursement also. I am referring t-code fbl3n. I want to know if there is any standard fms, or anything