Failed update N95
I've just bought a brand new N95 with firmware version 21. And I wanted to update it to version 30, just like I did with the N73 previously...
And the update FAILED. I got the "Phone Recovery" tips, which I followed, but still nothing. Now I can't turn on the phone. All I see is a dark screen with Nokia text on it.
I'm desperate! Please help! How can I recover my phone???
Hi marko7
Sorry for the problems that you are experiencing but you might like to look at the advice in this post by psychomania here:
/discussions/board/message?board.id=swupdate&message.id=38049#M38049
Happy to have helped forum in a small way with a Support Ratio = 37.0
Similar Messages
-
Updated N95 8Gb from v20 to v30 but restore failed
I updated N95 8Gb from v20 to v30 but impossible to restore
After restore and reboot the phone is empty with no data
What is the problem ?YIPPPEEEE! FINALLY.. i was able tio upgrade my n95 8gb to 31.0.015.. i dunno y thr ws soo much of fuss earlier.. all i did was js follow the simple process..
1.backed up my files..
2.fully charged my battery js b4 the upgrade..
3.turned off my kaspersky(Antivirus)
4.turned off my firewall
5.general profile..
n zoooooooom! it upgraded!! without any hiccups.. i js lost all my msgs.. hadnt backd up properly.. bt m content!
u cn try the same thng.. 99% it should wrk out.. i realised that i had decreased the level of antivirus protection and my firewall was still on, earlier.. mayb dats y it was causin so many problems.. bt this time around i js "paused complete protection" from antivirus.. stopped my firewall and it upgraded... eassssssyyyyy!
hope it works out fr u.. lemme knw!! -
I cannot update N95 RM-159 from 12.0.013 to 21.0.016 using Nokia software Updater.
Nokia software updater says this:
'Updating software failed:
Updating software in your phone has failed.Would you like to re-try the software update?'
I recieved this message after NSU finished downloading 110 MB of update and was installing it on phone with progress bar on 15 minutes left.
Now I am re-downloading NSU.........hope this will solve the problem........
Message Edited by talhahs on 01-Jul-2008 08:14 PM
Solved!
Go to Solution.The problem has been solved....
Here is the solution...........psychomania rocks
/discussions/board/message?board.id=swupdate&thread.id=35219 -
Is it really vital to update N95 Firmware? Come up...
Is it really important to update N95 all the time to the latest firmware version?
What have those gained who updated to latest version, and what have those lost who are using the previous versions.
Is it really worth considering to update N95 while taking into account all the risks of phone turning into brick during process, non-functionality of all the previously installed 3rd Party software, and many more complications?
Does the new software really bring about dramatic changes to the N95 stability, start-up timings of the Java applications, improved menu structure, battery life etc. The presence of Flash Lite 3 may not be the key factor in updating N95.
What are the main plus points for N95 users to update their phones and
what are the main negative points that they should not go to update.
Please take part to discuss your good/ bad experiences in this regard in order to make other N95 users clear as to what should be done.
Regards
EjazI used NSU to get 21.0.016 and I am happy I did it. The biggest improvement was with the WLAN connection, the old fw often failed to find my hidden home network, new fw has never missed it.
Previously the browser couldn't load webpages that were more than about 1.5mb and often crashed with multiple windows open, but now the browser works just fine with 4mb pages and multiple windows.
The only 3rd party sw that I had paid for was a game (Medal of Honor - what a waste of money that was) and that still works, but I did lose some of the free apps I had installed.
So yes, if you use the browser a lot over wlan than I'd say it's vital.
All those who believe in psychokinesis raise my hand. -
Basically headline says it all, my phone is in recovery mode following a failed update through the phone and I want all my photos back. I have already read the "iOS: Unable to Update or Restore" and it indicates that when restoring through iTunes, you lose all data on the phone. I have checked my iCloud (I am a Windows7 user so uploading does not happen automatically, as I unfortunately just figured out) and it only will upload my past 30 days of photos and contacts, inline with what I've read about the cloud only storing 30 days of your past data. I really would like to get all of my photos off of my phone, I had photostream activated and most were in that stream. Is there anything I can do? I don't know what operating system is on there currently, but I have always updated my phone succesfully until today when this happened, so I'm assuming whatever is most up to date until today is the OS it has. Thank you!
When your phone is in recovery mode, it's like it crashed. The only way that you can get it out of recovery mode is by restoring, and this erases all your data as well.
You can believe what you wish by "reading all over the internet". This is Apple's technical support forum. We do know what we're talking about.
since you have very important photos on your phone, why haven't you been importing them to your computer as soon as possible after taking them? This is how the phone is meant to be used. Keeping critical data on only a device which can be easily stolen, dropped and broken is just plain foolish. Also, did you not back up your phone (as you should be doing with any computer) before attempting any operating system update? As you've now just painfully learned, updates do not always go as planned.
I'm sorry for your data loss, but let this be a very important lesson. BTW, when was the last time you backed up your computer? I'm sure you have important data on your computer. Hard drives WILL fail. -
After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Adobe Premiere Elements 12.1 Update
Installation failed. Error Code: U44M1P7
Adobe Photoshop Elements 12.1 Update
Installation failed. Error Code: U44M1P7
Failed updates everyone on an iMac 27" running Mavericks- what can i do to get the latest updates which include support for my Sony A7 digital camera?
[email protected]Update 12.1 installation errors | Photoshop Elements, Premiere Elements
-
Why do I get iMessage failed update date and time in settings
My iphone5 keeps changing it time zone on it's own and I keep getting a notification in messages saying iMessage failed update your date and time in settings. I have update it several times and it's keep doing it. Now it's just frustrating. How can I take care of this problem for good.
I have also been getting the message ever since I got my iPhone 5 on September 12. I have to reboot the phone to fix the problem or turn the "Set Automatically" off and then back on. This is a glitch likely with Apple's iOS software, but my Verizon store said that have received numerous complaints on this issue, but no patch has been released for it as of yet.
-
Updating N95 Firmware! Some important questions
My N95 is currently running on V20.0.013. A major improvement in update were found in V20.0.015. Now a days the latest firmware is V21.0.016.
Q1. If I update my N95 to 21.0.016, then would I get all the improved features of V20.0.015 as well or should I update my N95 step wise, i.e., first to 20.0.015 and then 21.0.016 to have all improvements. In V20.0.015, there were improvements in menu structure.
Q2. I have pre-installed multi language dictionary on microSD card provided in the sale package. If I update my N95 to V21.0.016, would this dictionary still work or I have to re-install it again?
Q3. Is there any problems which anyone encountered after updating N95 to V21.0.016? Any draw backs of this latest V21.0.016 software?
I totally depend upon you technical guys, and always get satisfied with the nice cooperation of this forum members. I hope you'll guide me this time as well.
Regards to allHi erehman,
Some answers to you here.
A1. A new firmware will always wipe out everything in the phone memory. Absolutely no need to update first to 20.0.015. Go straight to 21.0.016.
But the previous firmware to 20.0.15 was 13.0.003.
A2. After an update of a firmware you need to reinstall everything. The memory card, though, is not affected and you do not even have to keep it in.
A3. There may be some problems or odd functions, but all together the 21 firmware is better than the 20 firmware.
harrykaa -
Update n95 to v21.0.0.016
When can we update n95 to v21.0.0.016 for the users in Asia Pacific area?
http://europe.nokia.com/A4577224
put your code at the page.if your phone has any updates you will see the answers yourself -
MQ:OSB Assign action failed updating variable "ServiceRequest"
Hi
We have a problem with the MQ adapters in Oracle Service Bus.
If we (by accident/break testing) put messages on the queue that are invalid XML (such as "Banana" as plain text), the OSB goes into an infinte loop with this message, as it can never be dequeued due to:
<BEA-381901> <Exception in MQ Inbound Request: TransportException EndPoint: T20230_GoodsEvent/ProxyServices/T20230_G
oodsEvent, com.bea.wli.sb.transports.TransportException: OSB Assign action failed updating variable "ServiceRequest": com.bea.wli.common.xquery.XQueryException: Error parsing XML: {err}FORG0
005: expected exactly one item, got 0 items
com.bea.wli.sb.transports.TransportException: OSB Assign action failed updating variable "ServiceRequest": com.bea.wli.common.xquery.XQueryException: Error parsing XML: {err}FORG0005: expect
ed exactly one item, got 0 itemsThis even prevents the message from being put on the dead letter queue.
Any hints?Correct, but we have tried switching to Text to no avail.
-
Hello, Hope you are doing well,
5 or 6 days back i shut down my windows 8 laptop and it started updating. the update went on for about 8 to 10 hours and the machine restarted. on restart it said failed to update and it 'restored.'
the issue is that after this failed update i see a watermark on the left bottom corner that says Activate Windows. i ignored it for a few days, even went to 'PC settings' from the start menu but did not find a way to 'Activate' windows. I hope you are aware
that the windows 8 series isn't very user friendly when it comes to settings menu. so i went through a couple of threads and learnt that my key was blocked.
Help restore or update windows to an active version.
P.S.: I have brought a genuine windows 8 with the laptop from an HP certified dealer in Mumbai. the key was accepted by Microsoft on various occasions until this happened.
also the system was infected by a trojan and malware for about a month. which was removed by running bit-defender. Need any more info? please solve this issue.Please repost your problem to the more appropriate Windows 8 Community Forums here...
http://answers.microsoft.com/en-us/windows/forum/windows_8?tab=Threads
Noel Paton | Nil Carborundum Illegitemi
CrashFixPC |
The Three-toed Sloth
No - I do not work for Microsoft, or any of its contractors. -
5320 Bugged after failed update...
As said...my phone is bugged after a failed update and its only showing "mode mode nokia" on the screen. Any solution to this?
i got it, i tried on an other PC and now it done.,,.,
-
OSB : BEA-382510: OSB Assign action failed updating variable
Hi all,
I just started learning OSB and created a simple process .
This is my request :
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
</soap:Header>
<soapenv:Body>
<hel:getGreeting xmlns:hel="http://hello.alsb.com/">
<!--Optional:-->
<arg0>string</arg0>
</hel:getGreeting>
</soapenv:Body>
</soapenv:Envelope>
im getting a error response in Assign:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>
BEA-382510: OSB Assign action failed updating variable "Test": weblogic.xml.query.exceptions.XQueryTypeException: {err}XP0006: "element return { {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }": bad value for type {http://www.w3.org/2001/XMLSchema}string
</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-382510</con:errorCode>
<con:reason>
OSB Assign action failed updating variable "Test": weblogic.xml.query.exceptions.XQueryTypeException: {err}XP0006: "element return { {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }": bad value for type {http://www.w3.org/2001/XMLSchema}string
</con:reason>
<con:location>
<con:node>RouteTo_HelloWorldBiz</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
This is my Xquery:
xquery version "1.0" encoding "Cp1252";
declare namespace xf = "http://tempuri.org/GoodbyeWorld_SB/XQuery/Hello_to_GoodBye/";
declare function xf:Hello_to_GoodBye($helloStr as xs:string)
as xs:string {
replace($helloStr, 'HELLO', 'Goodbye')
declare variable $helloStr as xs:string external;
xf:Hello_to_GoodBye($helloStr)
in my message response pipeln of the proxy service:
i have added the assign and given the expression : $body/hel:getGreetingResponse/return
var :Test
After the assign: i have given a replace activity:
xpath: ./hel:getGreetingResponse/return
varabile : body
Expression : string($Test)
when i test in OSB console:
im getting this error:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>
BEA-382510: OSB Assign action failed updating variable "Test": weblogic.xml.query.exceptions.XQueryTypeException: {err}XP0006: "element return { {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }": bad value for type {http://www.w3.org/2001/XMLSchema}string
</faultstring>
<detail>
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-382510</con:errorCode>
<con:reason>
OSB Assign action failed updating variable "Test": weblogic.xml.query.exceptions.XQueryTypeException: {err}XP0006: "element return { {http://www.w3.org/2004/07/xpath-datatypes}untypedAny }": bad value for type {http://www.w3.org/2001/XMLSchema}string
</con:reason>
<con:location>
<con:node>RouteTo_HelloWorldBiz</con:node>
<con:path>response-pipeline</con:path>
</con:location>
</con:fault>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
aany suggestions on where the issue is.
im totaly stuck here:
TIA,
karthikit is not clear at which point you are invoking Hello_to_GoodBye, and using which argument
anyway it's likely that you are passing an Xml element (a node, something like <hello>Charlie</hello>) instead of a simple type (a string, like "Charlie")
you should use the function data($body/bla) or text ($body/bla/text() ) to extract the value (Charlie) of your element -
Software iOS 6.0.1.failed update what to do next
Is your iPad currently running an iOS lower than iOS 5? Did you get an error message with a #?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
Maybe you are looking for
-
Can't get to Outlook Calendar in Internet Explorer
Whenever I am in outlook in Internet Explorer and I attempt to change from my e-mail to my calendar, the page blinks a lot for a few seconds and then I get this message: "Something went wrong and we can't sign you in right now. Please try again lat
-
For the last 2 days when I try to rent a movie on my Apple TV the Apple TV attempts to access the iTunes Store and then I get a message saying Apple TV cannot connect to the server at this time. Please try again later. I have no trouble connecting to
-
The full error message is the following: XML Parsing Error: Undefined entity Location chrome://mozapps/content/downloads/unknown content type.xul Line Number 30, Column 18
-
How can I backup/save my Firefox for Android bookmarks?
I would like to be able to save/export/backup my Firefox for Android bookmarks to a file on my Samsung Tab 2 tablet for safety. How can this be done or CAN it even be done. Thanks
-
Advanced Multi-Currency reporting
I've got a complex report requirement and I'm unsure how best to address it ... We've a multi-currency model and have enabled multiple currencies per entities. The users are now requesting reports that will show their currency exchange exposures : ie