Failed updates every night for Hewlett Packard Imaging NULL print HP Photosmart 6520 series

since I got my photosmart 6520 printer 12/02/2012 every night it tries to update Hewlett Packard Imaging NULL print HP photosmart 6520 series ....and it fails every time.  I have a HP P 7 1010 desktop and ever since I got new printer I have an exclaimation point on my computer and it says to troubleshoot and when you do it says it is doesn't have drivers and it shows NOT FIXED.  When you log off at night it tries to update the NULL print again and it fails every time.  I have talked to your service people numerous times for over an hour and they can not fix the problem.  PLEASE HELP
This question was solved.
View Solution.

I did some looking into the problem for another user, and it looks like this is just a ghost update.  Basically a "ghost update" is an update that was for the device, but the device has more recent drivers which causes the update to keep failing.  The only thing you can do is hide the update, or ignore it.  Windows will keep trying to push it, but your printer doesn't need it.  If it did need the update, it would install right.  You can find the thread where I helped the other user linked below.  Hope this helps.
I cannot update HP Imaging Null Point HP Desktop 3520 on laptop O/S Window 7 error 80070490
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

  • • Hewlett-Packard - Imaging - Null Print - HP Deskjet 3520 series - Error 0x8024200b

    have never been able to install imaging null print update on my destop on win 7/8/8.1 and now update appears on win 10 to update and again failure. Get error message:• Hewlett-Packard  - Imaging - Null Print - HP Deskjet 3520 series - Error 0x8024200b

    Hello , and welcome to the HP Forums! I see you're having issues with an update.  I would like to help! I'd recommend starting with a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also recommend downloading and running the HP Print and Scan Doctor. Once the Doctor has been run, re-run the update. Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!

  • Hewlett-Packard - Imaging, Other hardware - Null Print - HP Photosmart 7520 series

    Important Microsoft update continues to fail even following re install
    This question was solved.
    View Solution.

    I contacted Microsoft regarding this problem.  Spent over an hour on the phone and in chat mode, where MS took control of my computer.  They failed to solve the problem.  They told me I  have to have the disc which was used to load Windows 8 on my computer, which I don't have since my computer came with Windows 8 already loaded on it, in order for them to fix the problem.  Called HP since they laded Windows on my computer.  Can't get disc from them.  I'm stuck.

  • HT4528 Hello.  I recently upgraded my iPhone 4 to ios7.  Since the upgrade, my phone turns itself off at the same time every night, for about 30 minutes.  I have no idea why.  Any suggestions?

    I recently upgrade to iOS 7, and since then, my iPhone turns off automatically at the same time every night for about 30.  Why does this happen, and what setting can I change to prevent it?

    Is Do Not Disturb turned on? Do you see a quarter-moon icon up top in the status bar?

  • HT1338 I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open.  What's Zup?

    I'm running MacOS 10.7.5 with all updates and did an update last night for aperture and now aperture doesn't open.  What's Zup?  Help!

    Also when I do the system update it's not giving me an update for the latest Snow Leopard. I never knew that was available until I started looking around this site and it seems that since I have the internal dual core I should be able to update to mountian lion...is this correct? Will someone please help me and walk me through this. I love my mac I want to have it running like it should be.

  • Failed Updates every time!! Error message: Adobe Premiere Elements 12.1 Update Installation failed. Error Code: U44M1P7  Adobe Photoshop Elements 12.1 Update Installation failed. Error Code: U44M1P7

    Adobe Premiere Elements 12.1 Update
    Installation failed. Error Code: U44M1P7
    Adobe Photoshop Elements 12.1 Update
    Installation failed. Error Code: U44M1P7
    Failed updates everyone on an iMac 27" running Mavericks- what can i do to get the latest updates which include support for my Sony A7 digital camera?
    [email protected]

    Update 12.1 installation errors | Photoshop Elements, Premiere Elements

  • Instrument driver for Hewlett Packard E3631A

    Is there an instrument driver available for te Hewlett Packard E3631A?

    oh, sorry for that, all intrument driver for LV5.1 can only download from the Cd, there is no more in the NI website. i attached one for you
    Attachments:
    HPE363XA.LLB ‏980 KB

  • Can't open the applications for Hewlett Packard since upgrading my operation system

    HP Photosmart C6280 All-in-One operating in OS 10.8.3.
    I recently upgraded to OS10.8.3 and since doing so, I am getting this message, "You can't open the application HP Scan Pro becasue PowerPC applications are no longer supported." I tried to download a new driver and that didn't seem to work. What do I need to do?

    Hi,
    The HP Scan Pro is an older software verison, intended for Leopard (10.5) or older OS versions.
    Unplug the printer if it is connected via USB and uninstall any incompatible software by following the HP Uninstaller, located under Applications > Hewlett-Packard.
    Next reboot your Mac and follow the steps below to install the printer on Mountain Lion:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03378792&cc=us&dlc=en&lc=en&product=3194498&tas...
    Once installing the latest software you may scan by following the steps below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My iphone4 keeps shutting off on its own every 24-36 hours and I can't switch it back on unless I plug it into the charger n charge it. I didn't charge the iPhone for a long period the first time I used it and I charge it every night for at least 7 hours.

    My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

    My iPhone 4 shuts down automatically and I can't turn it back on unless I plug it into charger and charge it. This happens spontaneously. I didn't charge it for a long time before using it for the first time and I charge it nightly for at least 7 hours. What is the problem?

  • Muse update to allow for hi-res images on Retina displays?

    I understand that you can find a javascript file for static images, but I am looking to for better image quality on buttons as well since my navigation utilizes imagery. Does any one know if Adobe is addressing this issue?
    Any work-arounds in the meantime?
    Thanks!

    For buttons there's a trick you might find handy.
    To create a Photoshop button that outputs at Retina resolution you start by creating the button at twice the size (pixel dimensions) the button will be on your website. Then Place the button as you would normally and resize it down to half the size it came in at (so now it's the correct size for your site).
    If you were to output your site now, the button fill/background images would be resampled/resized by Muse during output to be standard, non-Retina, resolution.
    Now the trick.
    Take the text tool and double click on your button. This will convert the rectangle that is your button into a text frame. (A button is just a rectangle with background images set for the various possible states of a button.) You don't have to enter any text. Now when you output your site the original 2x resolution fill/background images for the states will be output.
    Why?
    There are many different factors that can cause text to reflow or resize in different browsers. Thus text frames will in some cases be different sizes in different browsers or on different devices. Since a text frame might resize, Muse will, in most cases, not resample the background images on a text frame below 2x the original dimensions during output (since the additional image data may be necessary if the text frame grows larger in the browser).

  • Order online or check at 10 every night for in store pick up?

    I already ordered my iPhone 5. The estimated delivery date is between the 30th and November 5th. I sold my 4S in order to get the 5 so now I'm stuck using my old crappy droid and would really like to get an iPhone as soon as I can.
    I spoke to an employee at the Apple Store and he suggested that I cancel my order online and take my chances getting it for in store pick up.
    My question is, is it almost a certainty that I will find iPhone available some night at 10 available at my local store for in store pick up sooner than I would receive it in the mail?
    Thank you for advice/answers.

    In the US, on-line ordering will begin at 0001 on September 20
    via Apple website. I have not seen anything for other countries.

  • Ovi Suite fails updating E7-00 for Anna 1/2 and An...

    I’ve bought an E7 and immediately updated to Anna. For some reason, Quickoffice disappeared. I searched the forums and I found that the Anna I installed is in fact 1 out of 3 updates and that there are two other updates named 1/2 and 2/2 that will bring back Quickoffice. I requested the Ovi Suite to look for new updates and it could not find any. I looked again in the forums and I found a chap who suggested changing the device date to 31/8/2011. I changed the date, went to Tools/Software Update and then, Ovi found updates. I then tried to download both Anna 1/2 and 2/2 but after some twenty seconds of apparently good download speed, the download stopped and I got the following message :
    « Something’s gone wrong
    There’s a problem with installing : Symbian Anna update 1/2 and Symbian Anna update 2/2. There was a problem with downloading the application. Please go to tools > Software updates and start the download  again. »
    I retried an untold number of times and again, the same message, as above.
    At some point the software update could not  find updates anymore. So I reinstalled Anna and only then (with my device date still on August 31 2011) Ovi Suite found the updates. I retried to install them and then, exactly as above, the same message (« Something’s gone wrong etc… »)
    OK I don’t have a great internet connection but I donwload without problem huge iPhone and other updates. What should I do if anything at all ? By the way, I live in Beirut, Lebanon.
    Thanks
    Phil
    Solved!
    Go to Solution.

    /t5/Software-Updates/Symbian-Anna-Troubleshooting/td-p/1127953
    Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

  • Why am I continually getting Firefox updates every day for 4.01, I already updated 3x now, Pls respond immediately re possible security breach

    Just keep getting the pop up saying I have to update my firefox browser to 4.01. I already did this and have done so a few more times and keep getting this message which my norton confirms is okay. Pls. help
    PS: Regarding educated guesses below, perhaps it is my Yahoo active x plugin bridge. In any case, how do I resolve this problem?
    Thanks,
    Donna
    [email protected]

    If you have problems with updating then best is to download the full version and uninstall the currently installed version.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Will I have to update my bios for p43 neo 3-f to use Ati 5800 series cards?

    I have had this main board for a year and a half its running well I have a gpu nvidia 9800gt installed atm no problems.
    just wondering if i have to update the bios because thinking on moving up to Ati 5800 series well like to know before  I purchase.

     No. What PSU do you have?
    https://forum-en.msi.com/index.php?topic=104805.0

  • I can't add a Hewlett-Packard psc 1200 printer.

    Trying to add hp psc 1200 printer, says software not currently available from the Software Update server.  Any ideas please?

    I've done all this and more. I get the error "The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
    In my case, I was just using the printer this morning, but it got a jam, so I disconnected it and deleted the printer from the printer list. So, even before I installed the drivers you pointed to, I'd oviously had a driver on my system that worked.
    BUT now it won't find it at all.
    I rue the fact that I deleted the printer from the printer list, but this really makes no sense to me.
    Any new suggestions would be wonderful!
    Thanks.
    re: HP Lasetjet 1200 printer

Maybe you are looking for