Failed when build petalinux

Is anyone faced such issue before?
root@rfswhz-HP:/home/rfswhz/Desktop/mypetalinux/Xilinx-ZC706-2015.2# petalinux-build
INFO: Checking component...
INFO: Generating make files and build linux
INFO: Generating make files for the subcomponents of linux
INFO: Building linux
[INFO ] pre-build linux/rootfs/fwupgrade
[INFO ] pre-build linux/rootfs/peekpoke
[INFO ] pre-build linux/rootfs/uWeb
[INFO ] build system.dtb
[INFO ] build linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] build zynq_fsbl
[INFO ] Setting up stage config
[INFO ] Setting up rootfs config
[INFO ] Updating for cortexa9-vfp-neon
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[INFO ] build linux/rootfs/fwupgrade
[INFO ] build linux/rootfs/peekpoke
[INFO ] build linux/rootfs/uWeb
[INFO ] build kernel in-tree modules
[INFO ] modules linux/kernel
[INFO ] post-build linux/rootfs/fwupgrade
[INFO ] post-build linux/rootfs/peekpoke
[INFO ] post-build linux/rootfs/uWeb
[INFO ] pre-install linux/rootfs/fwupgrade
[INFO ] pre-install linux/rootfs/peekpoke
[INFO ] pre-install linux/rootfs/uWeb
[INFO ] install system.dtb
[INFO ] install linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] install linux/u-boot
[INFO ] Expanding rootfs
[INFO ] install sys_init
[INFO ] install linux/rootfs/fwupgrade
[INFO ] install linux/rootfs/peekpoke
[INFO ] install linux/rootfs/uWeb
[INFO ] install kernel in-tree modules
[INFO ] modules_install linux/kernel
[INFO ] post-install linux/rootfs/fwupgrade
[INFO ] post-install linux/rootfs/peekpoke
[INFO ] post-install linux/rootfs/uWeb
[INFO ] package rootfs.cpio to /home/rfswhz/Desktop/mypetalinux/Xilinx-ZC706-2015.2/images/linux
[INFO ] Update and install vmlinux image
[INFO ] vmlinux linux/kernel
[INFO ] install linux/kernel
[INFO ] package zImage
[INFO ] zImage linux/kernel
[INFO ] install linux/kernel
[ERROR] ERROR: Invalid ELF file '/home/rfswhz/Desktop/mypetalinux/Xilinx-ZC706-2015.2/images/linux/vmlinux'
[ERROR] make[1]: *** [package-subsystem-FIT] Error 255
ERROR: Failed to build linux


What is the Linux distribution you are using?
I have seen this error in RHEL 6.5 in which few packages are missing, can you try installing the below packages and see if that helps?
openssl-devel.x86_64
openssl098e.x86_64
Regards,
Achutha

Similar Messages

  • [SOLVED] makepkg fails when building libdivecomputer-git from AUR.

    I'm not sure where to start debugging this failure as I'm a newb when it comes to compiling packages.
    Can anyone point me in the right direction?
    [dan@arch libdivecomputer-git]$ makepkg -s PKGBUILD
    ==> Determining latest git revision...
    -> Version found: 20120714
    ==> Making package: libdivecomputer-git 20120714-1 (Sat Jul 14 13:43:22 EST 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    ==> Extracting Sources...
    ==> Starting build()...
    ==> Connecting to GIT server....
    Cloning into 'libdivecomputer'...
    remote: Counting objects: 3995, done.
    remote: Compressing objects: 100% (1563/1563), done.
    remote: Total 3995 (delta 3240), reused 2983 (delta 2429)
    Receiving objects: 100% (3995/3995), 739.19 KiB | 59 KiB/s, done.
    Resolving deltas: 100% (3240/3240), done.
    ==> GIT checkout done or server timeout
    ==> Starting make...
    Cloning into '/home/dan/libdivecomputer-git/src/libdivecomputer-build'...
    done.
    libtoolize: putting auxiliary files in `.'.
    libtoolize: copying file `./ltmain.sh'
    libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
    libtoolize: copying file `m4/libtool.m4'
    libtoolize: copying file `m4/ltoptions.m4'
    libtoolize: copying file `m4/ltsugar.m4'
    libtoolize: copying file `m4/ltversion.m4'
    libtoolize: copying file `m4/lt~obsolete.m4'
    configure.ac:25: installing './config.guess'
    configure.ac:25: installing './config.sub'
    configure.ac:21: installing './install-sh'
    configure.ac:21: installing './missing'
    examples/Makefile.am: installing './depcomp'
    automake: warnings are treated as errors
    /usr/share/automake-1.12/am/ltlibrary.am: warning: 'libdivecomputer.la': linking libtool libraries using a non-POSIX
    /usr/share/automake-1.12/am/ltlibrary.am: archiver requires 'AM_PROG_AR' in 'configure.ac'
    src/Makefile.am:4: while processing Libtool library 'libdivecomputer.la'
    autoreconf: automake failed with exit status: 1
    ==> ERROR: A failure occurred in build().
    Aborting...
    Last edited by bergersau (2012-07-18 03:57:09)

    You may want to notify the maintainer by posting a comment on https://aur.archlinux.org/packages.php?ID=52648

  • I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build.  The same call works fine when running on the device

    I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
    I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
    The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
    I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
    I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
    By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
    Anyone have an idea on other things to try to debug/resolve this?
    Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
    Thanks!

    After a week's worth of debugging, I found the issue.
    The Java type returned from the call was defined as ArrayList.  Changing it to List resolved the problem.
    I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid.  And, why it works in Debug mode and not in Release build is even stranger.  Maybe someone can shed some light on the logic here to me.

  • How to create a Pooled VDI infrastructure using Win server 2012 as VM image?I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM

    I have followed the "usual" way to build a pooled VDI desktop using Win7 or Win8 with success, but it fails when I use an image of Win Server 2012 as VM instead.
    Am I overlooking something?  Should I need to prepare the image in a different way? (Sysprep differently?)
    Thanks

    Hi,
    Thank you for your posting in Windows Server Forum.
    Can you specify the error which you are facing during VDI setup for server 2012?
    I might think that you need to check the memory setting for server 2012, as might happens that due to less memory you can’t setup the VDI setup properly. 
    Memory: If the Master VM is configured with static memory, it must have at least 1024 MB as startup RAM. If the Master VM is configured with dynamic memory, the maximum RAM must be at least 1024 MB.
    Please check beneath article for information.
    Windows
    Server 2012 2,500-user pooled VDI deployment guide (Doc)
    Single Image Management for Virtual Desktop Collections in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Generation failed when doing a build in NWeaver studio

    Hi experts,
    while doing a dc build in my netweaver studio, i got a error.  I ve checked all my codes and that there are no syntax error. Somehow there is something preventing the generation process. The log found recorded an error but never gave a hint as what could be the possible error. So i ve no clue what is causing the generation to fail. Please see log captured below. Is there anyway i can find out the cause of this error ?
    Thanks a lot !
    Rgds,
    Daniel
    ===========================================================================
        [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
         [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:157)
         [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2047)
         [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
         [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
         [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
         [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
         [wdgen]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:364)
         [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:341)
         [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
         [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
         [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
         [wdgen]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:59)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:214)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:186)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
         [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
         [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
         [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
         [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
         [wdgen]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
         [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
         [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
         [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
         [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
         [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
         [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
         [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
         [wdgen] ERROR: Generation failed due to errors (26 seconds)
    Error: C:\Documents and Settings\pmsdla\.dtc\1\DCs\com.diagonal\appl\sd\workmenu\_comp\gen\default\logs\build.xml:98: [Error]   Generation failed!
         at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:254)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
         at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:116)
         at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:59)
         at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:214)
         at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:186)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
         at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:99)
         at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:73)
         at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1750)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:6004)
         at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
         at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
         at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
         at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
    Ant runtime 38.094 seconds
    Ant build finished with ERRORS
    [Error]   Generation failed!
    Error: Build stopped due to an error: [Error]   Generation failed!
    Error: Build stopped due to an error: [Error]   Generation failed!
    Build plugin finished at 2009-05-20 10:56:11 GMT+08:00 (SGT)
    Total build plugin runtime: 41.438 seconds
    Build finished with ERROR
    Edited by: Daniel  Lam on May 20, 2009 5:31 AM

    Hi Rajat,
    Thanks a lot. Indeed i found the error in task view.
    It is referring to a window in my webdynpro application.
    "window has no InterfaceView".
    Indeed the interface view is not there and there is no option for me to create the interface view.
    So what i did is to delete the window so that i can create a new one and the interface view will thus be generated. But when i tried to delete the window, a null pointer exception window is pop out.
    I remember when i created this window the other time, there was an exception.
    So the question is how to create the interface view ?
    Thanks
    Regards,
    Daniel

  • Build Fail when installing CC on mac

    When I use the CC Packager after it downloads the files for CC I get an error that the Build Failed: Build Fail, Your build encountered unrecoverable errors.
    The Log has the following.
    Tue Mar 24 10:12:36 2015
    [INFO] AdobePackageBuilder - Build Version - 1.8.0.23
    Tue Mar 24 10:12:36 2015
    [INFO] AdobePackageBuilder - Logging Level verbosity Set  to 4
    Tue Mar 24 10:12:36 2015
    [INFO] AdobePackageBuilder - AdobePackageBuilder : Terminate packet received from UI. Quitting ...
    How do I resolve this issue.

    Please refer to:
    https://helpx.adobe.com/creative-cloud/packager.html
    Regards
    Rajshree

  • Known issue: Speech APIs fail when an x86 package is run on an x64 desktop (Windows 10 Insider Preview SDK and tools, April 2015 release)

    When building an app for the x86 platform, speech APIs fail when the x86 package is run on the desktop of an x64 system. You may see an error with the message "mod not found".

    Use the Visual Studio Configuration Manager to retarget the app to x64 when running on an x64 system.

  • XSS SCA import in CMS error: failed to build

    We are getting error when trying to build XSS Track in NWDI. There are 2 brocken DC for development track.
    Here is the error message that we get:
    Development Component Build (2008-11-28 22:04:10)
      Component name: mss/mol
      Component vendor: sap.com
      SC compartment: sap.com_SAP_MSS_1
      Configuration: <SID>_XSS_D
      Location: <SID>_XSS_D
      Source code location: http://server01:55100/dtr/ws/XSS/sap.com_SAP_MSS/dev/active/DCs/sap.com/mss/mol/_comp/
      DC root folder: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/
      DC type: Web Dynpro
      Host: server01
    DC Model check:
       All used DCs are available locally
       validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
       validating dependency to  public part "FloorplanManager" of DC "sap.com/pcui_gp/xssfpm"
       validating dependency to  public part "default" of DC "sap.com/tc/wd/webdynpro"
       validating dependency to  public part "default" of DC "sap.com/com.sap.exception"
       validating dependency to  public part "default" of DC "sap.com/tc/ddic/ddicruntime"
       validating dependency to  public part "default" of DC "sap.com/tc/col/api"
       validating dependency to  public part "default" of DC "sap.com/tc/wdp/metamodel/content"
       validating dependency to  public part "Isrlpd" of DC "sap.com/pcui_gp/isrlpd"
       validating dependency to  public part "default" of DC "sap.com/com.sap.mw.jco"
       validating dependency to  public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
       validating dependency to  public part "default" of DC "sap.com/tc/logging"
       validating dependency to  public part "default" of DC "sap.com/com.sap.aii.util.misc"
       validating dependency to  public part "FPMUtils" of DC "sap.com/pcui_gp/xssutils"
       validating dependency to  public part "default" of DC "sap.com/tc/ddic/metamodel/content"
       validating dependency to  public part "default" of DC "sap.com/tc/cmi"
       validating dependency to  public part "FinUtils" of DC "sap.com/mss/finutils"
       DC model check OK
    Start build plugin:
       using build plugin: sap.com/tc/bi/bp/webDynpro
       starting build plugin from : /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/
    Build Plugin 'WebdynproPlugin', Version 7.00 SP 16 (645_VAL_REL, built on 2008-06-09 20:46:40 CEST, CL83275)
       development component:  mss/mol (sap.com)
          software component:  SAP_MSS (sap.com)
           support component:  EP-PCT-MGR-CO
                    location:  <SID>_XSS_D
                        type:  Web Dynpro
               build variant:  default
             output location:  /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default
           generation folder:  /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/t/64CE6536D7BD962CDCB65DC8A7640047
           plugin start time:  2008-11-28 22:04:11 GMT-07:00 (MST)
                     Java VM:  Java HotSpot(TM) Client VM, 1.4.2_12-b03 (Sun Microsystems Inc.)
    General options:
      convert *.xlf to *.properties: yes
      include sources for debugging: yes
    Warning: Source folder "META-INF" exists but is empty and will be ignored.
    Warning: Source folder "src/configuration" exists but is empty and will be ignored.
    Preparing data context..
    No public part descriptor found for component "tc/wd/webdynpro" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "com.sap.exception" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "tc/ddic/ddicruntime" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "tc/col/api" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "tc/wdp/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "com.sap.mw.jco" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "com.sap.aii.proxy.framework" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "tc/logging" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "com.sap.aii.util.misc" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "tc/ddic/metamodel/content" (vendor "sap.com"), public part "default", using legacy mode.
    No public part descriptor found for component "tc/cmi" (vendor "sap.com"), public part "default", using legacy mode.
    No 'default' JDK defined, will use running VM.
    Data context preparation finished in 0.934 seconds
    Creating Ant build file..
      Creating output file: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default/logs/build.xml
      Using macro file:     /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/macros/build.vm
    Build file creation finished in 1 second
    Starting Ant..
      Using build file:     /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default/logs/build.xml
      Using build target:   build
      Using Ant version:    1.6.2
    compile:
          [echo] Starting dictionary generator
         [ddgen]
         [ddgen] [Info]    Property deployment is true: Deployment information is provided!
         [ddgen] [Info]    Property sourcepath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/src/packages
         [ddgen] [Info]    Property targetpath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/t/64CE6536D7BD962CDCB65DC8A7640047/gen_ddic
         [ddgen] [Info]    Property archivename: sap.commssmol
         [ddgen] [Info]    Property vendor: sap.com
         [ddgen] [Info]    Property dcname: mss/mol
         [ddgen] [Info]    Property projectlanguage: de
         [ddgen] [Info]    Property language: Available languages are automatically determined!
         [ddgen] [Info]    Property addpaths ...
         [ddgen] [Info]    Generating datatypes/com/sap/mss/mol/monitor/model/types/MolModel.gdictionary
         [ddgen] [Info]    Generating datatypes/com/sap/pcuigp/xssutils/objectselection/model/types/FcObjectSelection.gdictionary
         [ddgen] [Info]    Generating datatypes/com/sap/pcuigp/xssutils/pernr/model/types/RHXSS_SER_EMPLOYEE.gdictionary
         [ddgen] [Info]    Generating dbtables/sdmDeployDd.xml
         [ddgen] [Info]    Generation finished (8 seconds)
         [ddgen]
         [timer] Dictionary generator finished in 8.499 seconds
          [echo] Starting WebDynpro generator
         [wdgen]
         [wdgen] [Info]    Property deployment is true: Deployment information is provided!
         [wdgen] [Info]    Property sourcepath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/src/packages
         [wdgen] [Info]    Property targetpath: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/t/64CE6536D7BD962CDCB65DC8A7640047/gen_wdp
         [wdgen] [Info]    Property archivename: sap.commssmol
         [wdgen] [Info]    Property vendor: sap.com
         [wdgen] [Info]    Property dcname: mss/mol
         [wdgen] [Info]    Property projectlanguage: de
         [wdgen] [Info]    Property language: Available languages are automatically determined!
         [wdgen] WARNING: Metadata of component FcLineItemMonitor is not valid! Component "//WebDynpro/Component:com.sap.mss.mol.monitor.FcLineItemMonitor", Role "ComponentController": A minimum of 1 object(s) is required
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView rulename_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView count_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaldate [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaltime_2 [text]: Context element and property are not compatible
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TransparentContainer tcActionBar [Children]: Container does not contain children
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnEditRule [visible]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnCreateRule [visible]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnCopyRule [visible]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnDeleteRule [visible]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Button btnPersonalize [visible]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView itemtxt_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> LinkToURL verakUser_url [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> LinkToURL verakUser_url [reference]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView itemdate_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView value_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView waers_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Image confirmedImage [tooltip]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Image confirmedImage [alt]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> Image confirmedImage [source]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView actionTaken_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvCurrency [text]: Context element and property are not compatible
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TransparentContainer DetailContainer [Children]: Container does not contain children
         [wdgen] [Error]   com.sap.mss.mol.monitor.VcLineItemMonitorView --> UIElement UpdateTrigger [enabled]: Context element and property are not compatible
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvStatus: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaldate: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView evaltime_2: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> LinkToAction LinkUpdate: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvUpdateRunning: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> Caption RuleGroup_Header: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> TextView tvCurrency: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> Caption Details_Header: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.VcLineItemMonitorView --> Caption ItemDetails_Header: UIElement does not have a label
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> TextView rulename_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> TextView ruleid_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> InputField inDescription [value]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> CheckBox cbShowAlert [checked]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddKF1 [selectedKey]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddSign [selectedKey]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> InputField inLimitAbs [value]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddAbsRel [selectedKey]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> InputField InputTimestamp [value]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeObject [title]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeObject [tooltip]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeKfspecgl [title]: Context element and property are not compatible
         [wdgen] [Error]   com.sap.mss.mol.monitor.RuleMaintView --> Tree treeKfspecgl [tooltip]: Context element and property are not compatible
         [wdgen] [Info]    com.sap.mss.mol.monitor.RuleMaintView --> Caption tableRulesHeader: UIElement does not have a label
         [wdgen] [Info]    com.sap.mss.mol.monitor.RuleMaintView --> CheckBox cbShowAlert: UIElement does not have a label
         [wdgen] [Warning] com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddSign: UIElement does not have a label
         [wdgen] [Warning] com.sap.mss.mol.monitor.RuleMaintView --> InputField inLimitAbs: UIElement does not have a label
         [wdgen] [Warning] com.sap.mss.mol.monitor.RuleMaintView --> DropDownByKey ddAbsRel: UIElement does not have a label
         [wdgen] [Info]    Catching throwable null
         [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
         [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:157)
         [wdgen]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
         [wdgen]      at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
         [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
         [wdgen] ERROR: Generation failed due to errors (7 seconds)
    Error: /usr/sap/<SID>/JC51/j2ee/cluster/server0/temp/CBS/27/.B/6448/DCs/sap.com/mss/mol/_comp/gen/default/logs/build.xml:99: [Error]   Generation failed!
         at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:254)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
         at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
    Ant runtime 16.597 seconds
    Ant build finished with ERRORS
    [Error]   Generation failed!
    Error: Build stopped due to an error: [Error]   Generation failed!
    Build plugin finished at 2008-11-28 22:04:32 GMT-07:00 (MST)
    Total build plugin runtime: 20.648 seconds
    Build finished with ERROR
    What can be done to resolve these error and trigger the build again.
    Bhavin

    Resloved with SAP help.
    1. Ran configuration wizard for CBS, CMS & DTR
    2. Changes few JVM parameters (increased heap size, jdbc pool size)

  • Error when  building a report from 2 different subject areas

    Hello Experts,
    I am using obiee 11.1.1.5.
    I have 5 dimension D1,D2,D3,D4,D5 connected to fact1 and 4 dimension connected to fact2 such as D1,D2,D6,D7.
    where D1,D2 is common to both the facts.
    Fact1 Is in subject area 1 and Fact2 is in subject area2.
    I need to create a report by adding columns of  subject area 1 and 2 with columns from all the dimensions D1,D2....D7.
    As of now i am getting error stating "No fact table exists at the requested level of detail " when i try to add columns from 2 different subject areas.
    Can anyone help me in solving the above problem.
    Is there any prerequisite to be taken care when  building a report from 2 different subject areas.
    Regards,
    NN

    Hello Nagireddy,
    So kind of you, for your quick reply
    I was able to solve the error by doing below steps in additional what you have specified
    -->For the fact table LTSs, set the logical level in the Content tab to the dimension's lowest level for each conforming dimension (leave the non-conforming dimensions level blank).
    Now I have another requirement i,e
    I need to have non measure columns such as Date into the newly created fact in BMM layer.
    I tried doing the steps which I followed for measure column, but it is throwing the same error which I get earlier.
    Below is the error
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail:
    Let me know if have any suggestions

  • Error when building Azure project

    A few days ago I started to see an error when compiling my Azure Project (cloud service with web and worker roles). I've been working with this Azure project for almost 3 years without seeing this before. When I attempt to build my Azure Project, 9 times
    out of 10 it fails with this error:
    C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Windows Azure Tools\2.2\Microsoft.WindowsAzure.targets(1371,5): error : Could not find file '<SourceCode>\SomeProject\bin\Debug\ServiceDefinition.csdef'.
    Here's another when I attempt to build again:
    C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Windows Azure Tools\2.2\Microsoft.WindowsAzure.targets(985,5): error : Could not find a part of the path 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\csx\Debug\ServiceDefinition.csdef'.
    Sometimes the error refers to ServiceDefinition, sometimes to ServiceConfiguration. The problem is that it is looking for the two files in places where it's not supposed to be. I have a single Azure Project in my solution, and a single service definition
    in my solution, but when building the error message says it can't find the service definition/config in some other Project in the solution. For example, it may try to find the service definition in some unit testing C# Project instead of in the Azure Project.
    Some isolation:
    Building same source code works fine for my colleauges.
    I've set up a new computer with Windows 8, VS2013, VS2013 Update 1, Azure SDK 2.2. Still same error.
    I've turned off multi-core builds. Still same error.
    I've seen another post on SO with a similar issue, but then it was related to publish settings files in his solution which were missing.

    Hi,
    Did your colleague build the same solution or create a new solution with the existing code? If they have exactly the same solution as you have, then please check if the environment of your machine (both old and new) is different from theirs. For instance,
    please check Azure version, VS extension, etc. If they created a new solution with the existing code, you can try to do that yourself to see whether it works.
    Best Regards,
    Ming Xu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Formatting Failed. Building not successful. See log.

    I keep getting a 'Formatting Failed. Building not successful. See log.' error every time I try to burn a project.
    I created the movie using Final Cut Pro, exported it to Compressor, and then submitting it using the DVD: Best Quality 120 minutes preset. I got 2 files, an m2v and an ac3 file which I assume is the video and the audio. I imported it to DVDSP as assets and then inserted a blank DVD ready to burn and I get that error when I try to burn.
    I tried burning several times and getting the same error. First time using Final Cut Studio.
    FYI: It's a 1h and 43 minutes video.
    This is my log:
    Starting DVD Build UNTITLED_DISC...
    Compiler Initializing...
    Precompiling Project UNTITLED_DISC
    No Video or Still Assets found in Track:Track 1
    Build cancelled
    Formatting finished.
    Building was not successful. See log.
    Starting DVD Build UNTITLED_DISC...
    Compiler Initializing...
    Precompiling Project UNTITLED_DISC
    No Video or Still Assets found in Track:Track 1
    Build cancelled
    Formatting finished.
    Building was not successful. See log.
    Starting DVD Build UNTITLED_DISC...
    Compiler Initializing...
    Precompiling Project UNTITLED_DISC
    No Video or Still Assets found in Track:Track 1
    Build cancelled
    Formatting finished.
    Building was not successful. See log.

    I am having exactly the same problem, which suddenly started happening. I have been successfully authoring DVD projects with DVD Studio Pro for about 2 years, so I know how to set up projects and output them properly. When I select "Burn" I get a failure message during the build process which tells me nothing other than the fact that that the build failed. To determine if the optical drive was faulty I checked playback of DVDs and data burning to a blank DVD from the Mac OS and both worked fine. Then I tried doing a separate Build and Format and that worked as well. But, I cannot seem to do the one step Burn that I have done dozens of time before. I can't imagine that this has any relationship to the problem, but I recently replaced the 750 GB Media Drive with three 1 TB drives, set up as a RAID, but did not touch the 750 GB Boot Drive. Any thoughts on this would be appreciated.

  • Getting Java error when build and deploy through eclipse designer.

    hello,
    My while activity looks like this -
    <while condition="bpws:getVariableData(&quot;integer&quot;)&lt;=count(bpws:getVariableData('GetRCItem-GetItemResponse', 'parameters', '/schemattwebservices:GetItemResponse/schemattwebservices:return/schemattwebservices:extendedFieldList[schemattwebservices:name=&quot;LIST_OF_TASKS&quot;]')/schemattwebservices:values)" name="ProcessRCTasks">
    It passes the validation but fails when I click on build and deploy.
    D:\dev\admin.console.trunk\workspace\ServiceFlow\temp\bpelc42058.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:2129: ';' expected.
    [bpelc] return "bpws:getVariableData("integer")<=count(bpws:getVariableData('GetRCItem-GetItemResponse', 'parameters', '/schemattwebservices:GetItemResponse/schemattwebservices:return/schemattwebservices:extendedFieldList[schemattwebservices:name="LIST_OF_TASKS"]')/schemattwebservices:values)" ;
    Please let me know what is wrong here and why is it giving me that java error? It should be better in reporting error and give it in BPEL terms.
    - Meghana

    I switched my compiler to use Oracle's bundled jre but I still get following 2 errors -
    [bpelc] D:\dev\admin.console.trunk\workspace\ServiceFlow\temp\bpelc33065.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:2129: ';' expected.
    [bpelc] return "bpws:getVariableData("integer")<=count(bpws:getVariableData('GetRCItem-GetItemResponse', 'parameters', '/schemattwebservices:GetItemResponse/schemattwebservices:return/schemattwebservices:extendedFieldList[schemattwebservices:name="LIST_OF_TASKS"]')/schemattwebservices:values)" ;
    [bpelc] ^
    [bpelc] D:\dev\admin.console.trunk\workspace\ServiceFlow\temp\bpelc33065.tmp\BPEL-INF\src\bpel\p0\BPEL_BIN.java:2982: ';' expected.
    [bpelc] return "bpws:getVariableData("index2")<=count(bpws:getVariableData('GetRCTaskItem-GetItemResponse', 'parameters', '/schemattwebservices:GetItemResponse/schemattwebservices:return/schemattwebservices:extendedFieldList[schemattwebservices:name="ZMF_PACKAGES"]')/schemattwebservices:values)" ;
    [bpelc] ^
    [bpelc] 2 errors
    Any idea? I have already pasted my while condition which has this condition on it. Second while is similar to first one.
    Thank you.
    - Meghana

  • Changes to MXML fail to build

    I imported a flex archive file but when Changes to MXML file
    they fail to build when I run the application. Flex builder keeps
    build a different Flex project. How to get it to build the current
    project I'm working on?
    I'm also not getting syntax highlighting as I type even
    though build automatically is ticked.
    I only get syntax highlighting when I run 1 of my projects I
    was working on in the past after I run any project.

    quote:
    Originally posted by:
    ntsiii
    Check for errors in the Problems pane. This will prevent
    compilation.
    Also, how do you know your project is not building?
    Tracy
    Thanks for that observation, Looking in the problems pane I
    get a strange error
    Severity and Description Path Resource Location Creation Time
    Id
    unable to open 'C:\Users\Nikos\Documents\Flex Builder
    3\ClickCarousel\libs' ClickCarousel Unknown 1216021345733 672
    As far as I know there is no reference to
    C:\Users\Nikos\Documents\Flex Builder 3\ClickCarousel\libs in my
    MXML code. I imported this project as an archive file into my
    workspace, maybe something went wrong there? What do you think?

  • [SOLVED] nVidia 87.76 Drivers installer fails to build kernel module

    Hey,
    I have a nVidia GeForce2 Integrated graphics card on my Asus A7N266 motherboard. According to the nVidia site, http://www.nvidia.com/object/IO_32667.html, the most recent driver that supports this is the 96.xx series. Yet as shown here, http://www.nvnews.net/vbulletin/showthread.php?t=87332, many people have found that the 96.xx series drivers cause graphical corruption when using a GeForce2 IGP.
    Before coming to Arch, I had used Xubuntu 7.04 and managed to compile the last known working drivers, version 87.76, following the instructions here: http://kmandla.wordpress.com/2007/03/25 … 20-12-386/
    That all went well but now I'm using Arch. I tried using the nvidia-96.xx driver in the repos just for testing sake but I still got the same graphical corruption.
    Thus I have been trying to install the 87.76 drivers on Arch, but it always fails at the kernel module building stage. I had first applied this patch here, http://www.nvnews.net/vbulletin/showthr … ost1086669, before compling as the plain driver wont compile against recent kernels.
    Here is the output from the installer:
    nvidia-installer log file '/var/log/nvidia-installer.log'
    creation time: Sun Aug 5 11:57:53 2007
    option status:
    license pre-accepted : false
    update : false
    force update : false
    expert : false
    uninstall : false
    driver info : false
    precompiled interfaces : true
    no ncurses color : false
    query latest version : false
    OpenGL header files : true
    no questions : false
    silent : false
    no recursion : false
    no backup : false
    kernel module only : false
    sanity : false
    add this kernel : false
    no runlevel check : false
    no network : false
    no ABI note : false
    no RPMs : false
    no kernel module : false
    force SELinux : default
    force tls : (not specified)
    X install prefix : (not specified)
    X library install path : (not specified)
    X module install path : (not specified)
    OpenGL install prefix : (not specified)
    OpenGL install libdir : (not specified)
    utility install prefix : (not specified)
    utility install libdir : (not specified)
    doc install prefix : (not specified)
    kernel name : (not specified)
    kernel include path : (not specified)
    kernel source path : (not specified)
    kernel output path : (not specified)
    kernel install path : (not specified)
    proc mount point : /proc
    ui : (not specified)
    tmpdir : /tmp
    ftp mirror : ftp://download.nvidia.com
    RPM file list : (not specified)
    Using: nvidia-installer ncurses user interface
    -> License accepted.
    -> No precompiled kernel interface was found to match your kernel; would you li
    ke the installer to attempt to download a kernel interface for your kernel f
    rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
    -> No matching precompiled kernel interface was found on the NVIDIA ftp site;
    this means that the installer will need to compile a kernel interface for
    your kernel.
    -> Performing CC sanity check with CC="cc".
    -> Performing CC version check with CC="cc".
    -> Kernel source path: '/lib/modules/2.6.22-ARCH/build'
    -> Kernel output path: '/lib/modules/2.6.22-ARCH/build'
    -> Performing rivafb check.
    -> Performing nvidiafb check.
    -> Cleaning kernel module build directory.
    executing: 'cd ./usr/src/nv; make clean'...
    rm -f -f nv.o nv-vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o nv.o nv
    -vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o nvidia.mod.o
    rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags}
    rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~
    rm -f -f stprof stprof.o symtab.h
    rm -f -rf .tmp_versions
    -> Building kernel module:
    executing: 'cd ./usr/src/nv; make module SYSSRC=/lib/modules/2.6.22-ARCH/bui
    ld SYSOUT=/lib/modules/2.6.22-ARCH/build'...
    NVIDIA: calling KBUILD...
    make CC=cc KBUILD_VERBOSE=1 -C /lib/modules/2.6.22-ARCH/build SUBDIRS=/home
    /kris/Source/nVidia GLX 87.76 Driver/NVIDIA-Linux-x86-1.0-8776-pkg1/usr/src/
    nv modules
    test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
    echo; \
    echo " ERROR: Kernel configuration is invalid."; \
    echo " include/linux/autoconf.h or include/config/auto.conf are mis
    sing."; \
    echo " Run 'make oldconfig && make prepare' on kernel src to fix it
    echo; \
    /bin/false)
    make[2]: *** No rule to make target `GLX'. Stop.
    NVIDIA: left KBUILD.
    nvidia.ko failed to build!
    make[1]: *** [mdl] Error 1
    make: *** [module] Error 2
    -> Error.
    ERROR: Unable to build the NVIDIA kernel module.
    ERROR: Installation has failed. Please see the file
    '/var/log/nvidia-installer.log' for details. You may find suggestions
    on fixing installation problems in the README available on the Linux
    driver download page at www.nvidia.com.
    Any ideas as to how I can get the kernel module to build?
    I am using 'kernel26 2.6.22.1-4' with the 'kernel-headers 2.6.22.1-1' from the testing repo.
    Last edited by Nameless One (2007-08-10 07:08:38)

    make CC=cc  KBUILD_VERBOSE=1 -C /lib/modules/2.6.22-ARCH/buildSUBDIRS=/home/kris/Source/nVidia GLX 87.76 Driver/NVIDIA-Linux-x86-1.0-8776-pkg1/usr/src/
    The name of the directory you placed the driver in contains spaces. That is  why you get the no rule to make target GLX error.
    It would be better not to circumvent pacman. I am using the following PKGBUILDs for the 8776 driver:
    nvidia-8776:
    pkgname=nvidia-8776
    pkgver=1.0.8776
    _nver=1.0-8776
    _kernver='2.6.22-ARCH'
    pkgrel=1
    pkgdesc="NVIDIA drivers for Arch kernel."
    arch=(i686 x86_64)
    [ "$CARCH" = "i686" ] && ARCH=x86
    [ "$CARCH" = "x86_64" ] && ARCH=x86_64
    url="http://www.nvidia.com/"
    depends=(kernel26 nvidia-8776-utils)
    conflicts=('nvidia' 'nvidia-96xx' 'nvidia-71xx' 'nvidia-legacy')
    install=nvidia.install
    source=(http://download.nvidia.com/XFree86/Linux-$ARCH/${_nver}/NVIDIA-Linux-$ARCH-${_nver}-pkg0.run NVIDIA_kernel-1.0-8776-20061203.diff.txt)
    md5sums=('93ad45fe7b974a5a80348e1890f9b7c9' '70e669f06ee4881c2583261672de292a')
    [ "$CARCH" = "x86_64" ] && md5sums=('f5340e4bbce811add994b1685cdea03b' '70e669f06ee4881c2583261672de292a')
    build()
    # Extract
    cd $startdir/src/
    sh NVIDIA-Linux-$ARCH-${_nver}-pkg0.run --extract-only
    cd NVIDIA-Linux-$ARCH-${_nver}-pkg0
    # Any extra patches are applied in here...
    patch -p0 < $startdir/NVIDIA_kernel-1.0-8776-20061203.diff.txt ||return 1
    cd usr/src/nv/
    ln -s Makefile.kbuild Makefile
    make SYSSRC=/lib/modules/$_kernver/build module || return 1
    # install kernel module
    mkdir -p $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
    install -m644 nvidia.ko $startdir/pkg/lib/modules/${_kernver}/kernel/drivers/video/
    sed -i -e "s/KERNEL_VERSION='.*'/KERNEL_VERSION='${_kernver}'/" $startdir/*.install
    Place the patch (NVIDIA_kernel-1.0-8776-20061203.diff.txt) and nvidia.install in the same directory as the PKGBUILD.
    nvidia-utils:
    pkgname=nvidia-8776-utils
    pkgver=1.0.8776
    _nver=1.0-8776
    pkgrel=1
    pkgdesc="NVIDIA drivers utilities and libraries."
    arch=(i686 x86_64)
    [ "$CARCH" = "i686" ] && ARCH=x86
    [ "$CARCH" = "x86_64" ] && ARCH=x86_64
    url="http://www.nvidia.com/"
    depends=(xorg-server)
    conflicts=('libgl' 'libgl-dri' 'ati-fglrx-utils' 'nvidia-legacy-utils' 'nvidia-71xx-utils' 'nvidia-96xx-utils')
    provides=('libgl' )
    #install=nvidia.install
    source=(http://download.nvidia.com/XFree86/Linux-$ARCH/${_nver}/NVIDIA-Linux-$ARCH-${_nver}-pkg0.run)
    md5sums=('93ad45fe7b974a5a80348e1890f9b7c9')
    [ "$CARCH" = "x86_64" ] && md5sums=('f5340e4bbce811add994b1685cdea03b')
    build()
    # override nvida install routine and do it the long way.
    cd $startdir/src/
    sh NVIDIA-Linux-${ARCH}-${_nver}-pkg0.run --extract-only
    cd NVIDIA-Linux-${ARCH}-${_nver}-pkg0/usr/
    mkdir -p $startdir/pkg/usr/{lib,bin,share/applications,share/pixmaps,man/man1}
    mkdir -p $startdir/pkg/usr/lib/xorg/modules/{extensions,drivers}
    mkdir -p $startdir/pkg/usr/share/licenses/nvidia/
    install `find lib/ -iname \*.so\*` $startdir/pkg/usr/lib/
    install lib/tls/* $startdir/pkg/usr/lib
    install share/man/man1/* $startdir/pkg/usr/man/man1/
    rm $startdir/pkg/usr/man/man1/nvidia-installer.1.gz
    install X11R6/lib/libXv* $startdir/pkg/usr/lib/
    install share/applications/nvidia-settings.desktop $startdir/pkg/usr/share/applications/
    # fix nvidia .desktop file
    sed -e 's:__UTILS_PATH__:/usr/bin:' -e 's:__PIXMAP_PATH__:/usr/share/pixmaps:' -i $startdir/pkg/usr/share/applications/nvidia-settings.desktop
    install share/pixmaps/nvidia-settings.png $startdir/pkg/usr/share/pixmaps/
    install X11R6/lib/modules/drivers/nvidia_drv.so $startdir/pkg/usr/lib/xorg/modules/drivers
    install X11R6/lib/modules/extensions/libglx.so.$pkgver $startdir/pkg/usr/lib/xorg/modules/extensions
    install -m755 bin/nvidia-{settings,xconfig,bug-report.sh} $startdir/pkg/usr/bin/
    cd $startdir/pkg/usr/lib/;
    ln -s /usr/lib/libGL.so.$pkgver libGL.so
    ln -s /usr/lib/libGL.so.$pkgver libGL.so.1
    ln -s /usr/lib/libGLcore.so.$pkgver libGLcore.so.1
    ln -s /usr/lib/libnvidia-cfg.so.$pkgver libnvidia-cfg.so.1
    ln -s /usr/lib/libnvidia-tls.so.$pkgver libnvidia-tls.so.1
    cd $startdir/pkg/usr/lib/xorg/modules/extensions;
    ln -s /usr/lib/xorg/modules/extensions/libglx.so.$pkgver libglx.so
    install $startdir/src/NVIDIA-Linux-${ARCH}-${_nver}-pkg0/LICENSE $startdir/pkg/usr/share/licenses/nvidia/
    find $startdir/pkg/usr -type d -exec chmod 755 {} \;
    # phew :)
    Last edited by kappa (2007-08-09 11:14:42)

  • Sage-mathematics from AUR fails to build

    Anyone have any ideas why eclib shared libraries failed to build. I'd like to get the program running quickly, as I'm using it for college. On an unrelated note, why hasn't it remained in the repos? Its takes quite a long time to build. Let me know if anything else will help.
    [duke@cii ~]$ cd '/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0' && '/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/sage' -sh
    Starting subshell with Sage environment variables set.
    Be sure to exit when you are done and do not do anything
    with other copies of Sage!
    Bypassing shell configuration files ...
    SAGE_ROOT=/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8
    (sage subshell) cii:eclib-20100711.p0 duke$ make
    make: *** No targets specified and no makefile found. Stop.
    SAGE_ROOT=/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8
    (sage subshell) cii:eclib-20100711.p0 duke$ ./configure
    bash: ./configure: No such file or directory
    SAGE_ROOT=/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8
    (sage subshell) cii:eclib-20100711.p0 duke$ ls
    spkg-check spkg-install SPKG.txt src
    SAGE_ROOT=/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8
    (sage subshell) cii:eclib-20100711.p0 duke$ ./spkg-install
    Deleting old versions of eclib libraries, which
    would interfere with new builds.
    rm: cannot remove `libcurvesntl.*': No such file or directory
    rm: cannot remove `libg0nntl.*': No such file or directory
    rm: cannot remove `libjcntl.*': No such file or directory
    rm: cannot remove `librankntl.*': No such file or directory
    rm: cannot remove `libmwrank.*': No such file or directory
    Deleting old include directory
    mkdir -p include
    mkdir -p lib
    cd procs && make lib install
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/procs'
    Makefile:92: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:95: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:108: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    ar r libjcntl.a interface_n.o arith_n.o marith_n.o gpslave_n.o conic_n.o legendre_n.o unimod_n.o quadratic_n.o cubic_n.o illl_n.o hilbert_n.o parifact_n.o p2points_n.o compproc_n.o kbessel_n.o vector_n.o matrix_n.o subspace_n.o mvector_n.o mmatrix_n.o msubspace_n.o xsplit2_n.o timer_n.o svector_n.o smatrix_n.o smatrix_elim_n.o polys_n.o realroots_n.o gf_n.o
    ranlib libjcntl.a
    chmod a+r *
    (cd ../include; rm -f interface.h templates.h arith.h xmod.h marith.h gpslave.h compproc.h vec.h vector.h mat.h matrix.h sub.h subspace.h rat.h bigrat.h kbessel.h svec.h svector.h smat.h smatrix.h smat_elim.h smatrix_elim.h mvector.h mmatrix.h msubspace.h method.h splitbase.h xsplit.h conic.h legendre.h quadratic.h unimod.h illl.h hilbert.h timer.h cubic.h gf.h polys.h realroots.h parifact.h p2points.h)
    cp -p interface.h templates.h arith.h xmod.h marith.h gpslave.h compproc.h vec.h vector.h mat.h matrix.h sub.h subspace.h rat.h bigrat.h kbessel.h svec.h svector.h smat.h smatrix.h smat_elim.h smatrix_elim.h mvector.h mmatrix.h msubspace.h method.h splitbase.h xsplit.h conic.h legendre.h quadratic.h unimod.h illl.h hilbert.h timer.h cubic.h gf.h polys.h realroots.h parifact.h p2points.h ../include
    chmod a+r ../include/*.h
    rm -f ../lib/libjcntl.a
    ar r ../lib/libjcntl.a interface_n.o arith_n.o marith_n.o gpslave_n.o conic_n.o legendre_n.o unimod_n.o quadratic_n.o cubic_n.o illl_n.o hilbert_n.o parifact_n.o p2points_n.o compproc_n.o kbessel_n.o vector_n.o matrix_n.o subspace_n.o mvector_n.o mmatrix_n.o msubspace_n.o xsplit2_n.o timer_n.o svector_n.o smatrix_n.o smatrix_elim_n.o polys_n.o realroots_n.o gf_n.o
    ar: creating ../lib/libjcntl.a
    ranlib ../lib/libjcntl.a
    chmod a+rx ../lib/libjcntl.a
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/procs'
    cd qcurves && make lib install
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qcurves'
    Makefile:123: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:126: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:134: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    make[1]: Nothing to be done for `lib'.
    (cd ../include; rm -f curve.h points.h cperiods.h isogs.h reader.h mwprocs.h lambda.h sifter.h sieve_search.h htconst.h egr.h saturate.h divpol.h pointsmod.h curvemod.h ffmod.h tlss.h elog.h getcurve.h )
    for f in curve.h points.h cperiods.h isogs.h reader.h mwprocs.h lambda.h sifter.h sieve_search.h htconst.h egr.h saturate.h divpol.h pointsmod.h curvemod.h ffmod.h tlss.h elog.h getcurve.h ; \
    do cp ${f} ../include; \
    done
    chmod a+r ../include/*
    rm -f ../lib/libcurvesntl.a
    cp libcurvesntl.a ../lib
    chmod a+rx ../lib/libcurvesntl.a
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qcurves'
    cd qrank && make lib install
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qrank'
    Makefile:78: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:122: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:146: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    rm -f librankntl.a
    ar r librankntl.a mrank1_n.o mrank2_n.o mequiv_n.o mquartic_n.o mlocsol_n.o mglobsol_n.o qc_n.o sqfdiv_n.o desc2_n.o transform_n.o minim_n.o reduce_n.o bitspace_n.o GetOpt_n.o twoadic_n.o descent_n.o
    ar: creating librankntl.a
    ranlib librankntl.a
    (cd ../include; rm -f mrank2.h mequiv.h mlocsol.h mglobsol.h msoluble.h mquartic.h mrank1.h qc.h sqfdiv.h version.h minim.h reduce.h transform.h desc2.h bitspace.h options.h GetOpt.h twoadic.h descent.h)
    for f in mrank2.h mequiv.h mlocsol.h mglobsol.h msoluble.h mquartic.h mrank1.h qc.h sqfdiv.h version.h minim.h reduce.h transform.h desc2.h bitspace.h options.h GetOpt.h twoadic.h descent.h; \
    do cp ${f} ../include; \
    done
    chmod a+r ../include/*
    rm -f ../lib/librankntl.a
    cp librankntl.a ../lib
    chmod a+rx ../lib/librankntl.a
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qrank'
    cd g0n && make lib install
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/g0n'
    Makefile:115: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:118: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:121: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    make[1]: Nothing to be done for `lib'.
    (cd ../include; rm -f periods.h cusp.h homspace.h newforms.h nflist.h moddata.h oldforms.h symb.h fixc6.h pcprocs.h)
    for f in periods.h cusp.h homspace.h newforms.h nflist.h moddata.h oldforms.h symb.h fixc6.h pcprocs.h; \
    do cp ${f} ../include; \
    done
    chmod a+r ../include/*
    rm -f ../lib/libg0nntl.a
    cp libg0nntl.a ../lib
    chmod a+rx ../lib/libg0nntl.a
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/g0n'
    cd procs && make install_so && make tests progs
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/procs'
    Makefile:92: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:95: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:108: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    g++ -fPIC --shared libjcntl.a interface_n.o arith_n.o marith_n.o gpslave_n.o conic_n.o legendre_n.o unimod_n.o quadratic_n.o cubic_n.o illl_n.o hilbert_n.o parifact_n.o p2points_n.o compproc_n.o kbessel_n.o vector_n.o matrix_n.o subspace_n.o mvector_n.o mmatrix_n.o msubspace_n.o xsplit2_n.o timer_n.o svector_n.o smatrix_n.o smatrix_elim_n.o polys_n.o realroots_n.o gf_n.o -o libjcntl.so -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -lgmp -lpari -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -lgmp -lpari -lm
    cp libjcntl.so ../lib/
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/procs'
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/procs'
    Makefile:92: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:95: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:108: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    make[1]: Nothing to be done for `tests'.
    make[1]: Nothing to be done for `progs'.
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/procs'
    cd qcurves && make install_so && make tests progs
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qcurves'
    Makefile:123: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:126: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:134: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    cp libcurvesntl.so ../lib/
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qcurves'
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qcurves'
    Makefile:123: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:126: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:134: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    make[1]: Nothing to be done for `tests'.
    g++ -o ./torsion torsion_n.o libcurvesntl.a -ljcntl -L../lib -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lm
    g++ -c -fPIC -g -O2 -DNEW_OP_ORDER -DUSE_PARI_FACTORING -I../include -DNTL_ALL -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include conductor.cc -o conductor_n.o
    g++ -o ./conductor conductor_n.o libcurvesntl.a -ljcntl -L../lib -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lm
    g++ -c -fPIC -g -O2 -DNEW_OP_ORDER -DUSE_PARI_FACTORING -I../include -DNTL_ALL -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include twist.cc -o twist_n.o
    g++ -o ./twist twist_n.o libcurvesntl.a -ljcntl -L../lib -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lm
    g++ -c -fPIC -g -O2 -DNEW_OP_ORDER -DUSE_PARI_FACTORING -I../include -DNTL_ALL -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include allisog.cc -o allisog_n.o
    g++ -o ./allisog allisog_n.o libcurvesntl.a -ljcntl -L../lib -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lm
    g++ -c -fPIC -g -O2 -DNEW_OP_ORDER -DUSE_PARI_FACTORING -I../include -DNTL_ALL -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include findinf.cc -o findinf_n.o
    g++ -o ./findinf findinf_n.o libcurvesntl.a -ljcntl -L../lib -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lm
    g++ -c -fPIC -g -O2 -DNEW_OP_ORDER -DUSE_PARI_FACTORING -I../include -DNTL_ALL -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include indep.cc -o indep_n.o
    g++ -o ./indep indep_n.o libcurvesntl.a -ljcntl -L../lib -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lm
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qcurves'
    cd qrank && make install_so && make tests progs
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qrank'
    Makefile:78: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:122: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:146: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    g++ -fPIC --shared librankntl.a mrank1_n.o mrank2_n.o mequiv_n.o mquartic_n.o mlocsol_n.o mglobsol_n.o qc_n.o sqfdiv_n.o desc2_n.o transform_n.o minim_n.o reduce_n.o bitspace_n.o GetOpt_n.o twoadic_n.o descent_n.o -o librankntl.so -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -L../lib -lcurvesntl -ljcntl -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lpari -lm
    cp librankntl.so ../lib/
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qrank'
    make[1]: Entering directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qrank'
    Makefile:78: warning: overriding recipe for target `clean'
    ../Makefile:76: warning: ignoring old recipe for target `clean'
    Makefile:122: warning: overriding recipe for target `veryclean'
    ../Makefile:84: warning: ignoring old recipe for target `veryclean'
    Makefile:146: warning: overriding recipe for target `check'
    ../Makefile:95: warning: ignoring old recipe for target `check'
    g++ -c -fPIC -g -O2 -DNEW_OP_ORDER -DUSE_PARI_FACTORING -I../include -DNTL_ALL -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include version.cc -o version_n.o
    g++ -c -fPIC -g -O2 -DNEW_OP_ORDER -DUSE_PARI_FACTORING -I../include -DNTL_ALL -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include -I/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/include mwrank.cc -o mwrank_n.o
    chmod og+r *
    g++ -o mwrank version_n.o mwrank_n.o descent_n.o mrank1_n.o mrank2_n.o mequiv_n.o mquartic_n.o \
    mlocsol_n.o mglobsol_n.o qc_n.o sqfdiv_n.o desc2_n.o \
    transform_n.o minim_n.o reduce_n.o bitspace_n.o GetOpt_n.o twoadic_n.o \
    -L../lib -lcurvesntl -ljcntl -lpari -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -L/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/local/lib -lntl -L../lib -lgmp -lpari -lpari -lm
    collect2: ld returned 1 exit status
    make[1]: *** [mwrank] Error 1
    make[1]: Leaving directory `/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8/spkg/build/eclib-20100711.p0/src/qrank'
    make: *** [so] Error 2
    Error building eclib shared libraries
    SAGE_ROOT=/tmp/yaourt-tmp-duke/aur-sage-mathematics/src/sage-4.8

    I'm getting something slightly different when I try to build this package. They all seem to be the same as this, except with different function names.
    error: ‘mulColDense’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
    Does anyone have any ideas on how to remedy this?

Maybe you are looking for

  • Sony HDR-HC1 with iMovie HD 6 experience

    Well, I took the plunge and picked up a Sony HDR-HC1 HD camcorder. I took it for its first drive. The video is awesome but iMovie HD 6 has some quirks. I imported the video into the computer. It imports at 1/2 real time. I learned later that this is

  • Slot loading optical drive not recognized.

    Recently I replaced a none functioning optical drive in my 15" 1.67 HS PB with 2.0g ram 160hdd. On reboot it will show a grey screen or a ? folder. I have tried everything ( and I mean everything) 2x over. This is what I find: 1) The PB will boot up

  • HT1338 new mac virus

    How can you tell if you have a virus? I am having trouble with my email and can not get any mail from work. This has been going on for  a couple of weeks. My phone is now having issues too! I also have also had a lot of Adobe requests to update.

  • LSMW_BAPI_BUS2012

    Hi gurus,    I am creating LSMW for migrating open PO using BAPI BO- BUS2012 Method          :CREATEFROMDATA1 Message Type:PORDCR1 Basic Typ :PORDCR101 During Idoc processing i am getting the following errors. status: 51   Application document not po

  • JRC change data source of xml based report

    Hello I have a crystal report with an xml data source. I stored the report without data. When I open the report using JRC and try to set a new data source an exception is thrown. - JRCAgent1 received request: setDataSourceRequest - An error occurs, t