Failed (why else would I post). Error creating an image of Drive D:, rc = 2. Return Code -2147467259 0x80004005. "Not enough storage is available to process this command".

Seems a common set of Return Codes to post so apologies that's not specific.
To me appears the issue is related to the "Not enough storage is available to process this command" log entry. Looked into it and some SCCM 2007 issues that were related to too many sessions to the site server, but even after rebooting my MDT server
I get the same issue.
The server I am attempting to capture has a 60gb VHD with around 30gb actually used. The MDT Server has over 100GB free space.
Here is from BDD.log:
Console > Turning on VERIFY option for network share
ZTIBackup 10/10/2014 12:56:30 PM
0 (0x0000)
Console > Scanning files and directories...
ZTIBackup 10/10/2014 12:56:30 PM
0 (0x0000)
Console > Error imaging drive [D:\]
ZTIBackup 10/10/2014 12:56:30 PM
0 (0x0000)
Console > Not enough storage is available to process this command.
ZTIBackup 10/10/2014 12:56:31 PM
0 (0x0000)
Return code from command = 2 ZTIBackup
10/10/2014 12:56:31 PM 0 (0x0000)
Error creating an image of drive D:, rc = 2
ZTIBackup 10/10/2014 12:56:31 PM
0 (0x0000)
Event 41036 sent: Error creating an image of drive D:, rc = 2
ZTIBackup 10/10/2014 12:56:31 PM
0 (0x0000)
ZTIBackup COMPLETED. Return Value = 2
ZTIBackup 10/10/2014 12:56:32 PM
0 (0x0000)
ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2
ZTIBackup 10/10/2014 12:56:32 PM
0 (0x0000)
Event 41002 sent: ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2
ZTIBackup 10/10/2014 12:56:32 PM
0 (0x0000)
Command completed, return code = -2147467259
LiteTouch 10/10/2014 12:56:33 PM
0 (0x0000)
Litetouch deployment failed, Return Code = -2147467259 0x80004005
LiteTouch 10/10/2014 12:56:33 PM
0 (0x0000)
Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259 0x80004005
LiteTouch 10/10/2014 12:56:33 PM
0 (0x0000)
I'll post below full logs.

imagex reported:
Console > Error imaging drive [D:\]
Console > Not enough storage is available to process this command.
obvious question is: do you have enough free space on
"\\arcadmin3\deploymentshare$\Captures\SIMSERVER.wim"
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

Infopath has encountered an error. The operation failed. Not enough storage is available to process this command

hello,
Using INFO PATH 2013 on Windows 7 64 bit, user is getting the error "Infopath has encountered an error. The operation failed. Not enough storage is available to process this command"
We added the registy IRPStackSize and set it to max 50. This works on my test machine but not this user.
So when using infopath designer 2013, then blank form and data connection, we select Receieve Data-->Sharepoint Library or list and then enter the url to connect to and the user gets the error "Infopath has encountered an error. The operation failed.
Not enough storage is available to process this command"
We use office 365 of course with Sharepoint.
I am able to run infopath 2013 as an admin and I am able to connect fine, but not with his standard profile.
Any ideas, please let me know.
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value from
our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

side note, i am able to connect on his pc with a standard user account so something with his windows profile that's corrupted, anyone know?
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value
from our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

Thread creation error: Not enough storage is available to process this command

Two user in my company have this problem, I have already used the solution on the community but would come back after 2 to 3 weeks. They all have the message "Thread creation error: Not enough storage is available to process this command". I tried increase the virtual memory to 4Gb, update one client to the latest, reset IRPStackSize, delete temp folder. one client is 7.5.XX with windows 7 and another is 6.20.0.104 with Windows XP,My machine is also 6.20 with windows 7 but I dont have this problem.

Version previous to 7.6 worked fine. After update I have got this message and mostly of Skype GUI turns black or vanishes. No possibility of making more than one call before crash, It is amazing that a thread started about two weeks ago has no technical answer, at least. What do I do with my credits and my appointments? Throw them away?

DHCP Split-Scope Configuration Wizard showing error "Not enough storage is available to process this command".

Hi,
I'm trying to split the DHCP scope between two Servers using the DHCP Split-Scope Configuration Wizard.
Server one is a VM hosted on Hyper-V and is running Windows Small Business Server 2008 (I think this was previously SBS2003 and was upgraded at some point in time). The whole DHCP scope is currently configured on here.
Server two is a VMware VM running Windows Server 2012 R2.
I've installed the DHCP Server role on Server two (2012R2) and authorized the Server. When I launch DHCP Manager, add the SBS2008 Server in the MMC, right click the scope and choose "Advanced > Split-Scope", and then run through the wizard,
I get as far as the "Percentage of Split" screen, and when I click next I get the error "Not enough storage is available to process this command".
I've searched online for this particular error message and I've come across articles suggesting AV exclusions are not in place for the DHCP database and files, however in this case the exclusions are definitely in place and I've also tried completely disabling
AV on both Servers and this made no difference to the outcome.
I also came across articles suggesting the "IRPStackSize" registry DWORD needed to be added and set to a decimal value of 15 or larger. Again, I've tried adding this and rebooted both Servers but I get the same result.
Anyway have any ideas?
Thanks,
Craig

Hi Eve,
No, there were no related events in the event logs. I've since tried splitting the DHCP scope manually but this did not work - the DHCP Server on the SBS would just stop and event: 1053 was displayed when trying to start the service again. I noticed
that as soon as I de-activated DHCP Server on the 2012 Server then the DHCP Server on the SBS would start again.
I then found the following in a TechNet article that would suggest I cannot have another DHCP Server on the network if using Small Business Server.
Notes
A DHCP server running Microsoft Small Business Server will not operate if another DHCP server is active on its network.
Detection of unauthorized DHCP servers requires the deployment of Active Directory Domain Services and the DHCP service. Other DHCP servers do not attempt to determine whether they are authorized by Active Directory Domain Services before offering IP address
leases.

"Not enough storage is available to process this command" error in RDP login

I agree with disabling SSL3 but the TLS ciphers are unaffected and may be causing you issues.

Out of the blue I got the error message in the rdp connection like "server not found" The server is windows server 2012. It was also not working properly, Although the server hosting became right after half a day,before there was only the main domain was working, sub domains were not accessible. The problem is solved by removing the registry entries i.e TSL1.0, TSL1.1, TSL1.2, SSL3.0 both client and server, It was added before because of poodle vulnerability (mentioned in https://technet.microsoft.com/en-us/library/security/3009008.aspx) . Now when everything looks fine got another problem “Not enough storage is available to process this command” error in RDP login screen after i gave the credentials. When I got in to the server through kvm console of the softlayer, In the event log there were 3 repeated errors of SChannel with the...
This topic first appeared in the Spiceworks Community

Error starting thread: Not enough storage is available to process...

Hi all,
We are seeing server going down frequently with below exception:
[ERROR][thread ] Failed to start new thread
[2010-04-08 14:36:54,046][ERROR][com.astrazeneca.portal.rss.ContentTransformer] - Error processing item:null
; SystemID: http://beaa.astrazeneca.net:10002/NewsBroker/resources/newsToRss.xsl; Line#: 21; Column#: 128
javax.xml.transform.TransformerException: java.lang.Error: Error starting thread: Not enough storage is available to process this command.
     at org.apache.xalan.extensions.ExtensionHandlerJavaPackage.callFunction(ExtensionHandlerJavaPackage.java:403)
     at org.apache.xalan.extensions.ExtensionHandlerJavaPackage.callFunction(ExtensionHandlerJavaPackage.java:426)
     at org.apache.xalan.extensions.ExtensionsTable.extFunction(ExtensionsTable.java:220)
     at org.apache.xalan.transformer.TransformerImpl.extFunction(TransformerImpl.java:437)
     at org.apache.xpath.functions.FuncExtFunction.execute(FuncExtFunction.java:199)
     at org.apache.xpath.XPath.execute(XPath.java:268)
     at org.apache.xalan.templates.ElemVariable.getValue(ElemVariable.java:279)
     at org.apache.xalan.templates.ElemVariable.execute(ElemVariable.java:247)
I have a weblogic support SR open and they suggested to add -XXtlaSize and -XXlargeObjectLimit to our JVM parameter. With these parameters, we are getting below error in Windows frequently:
Reporting queued error: faulting application java.exe, version 1.5.0.11, faulting module jvm.dll, version 27.3.1.1, fault address 0x0014b442.
I have seen few threads on Sun forum, but answer was not posted there. Details of our environment are as below:-
JVM : JROCKIT 1.5.0.11
OS : Windows 2003
Application Server : Weblogic 10
Any inputs or pointers will be highly appreciated as this is a bit urgent for me...
Thanks & Regards,
Sanjeev

Hi Henrik,
I am running Weblogic with below parameters now:
-Xnohup -Xms:1536m -Xmx:1536m -XXtlaSize:min=32k,preferred=768k -XXlargeObjectLimit:32K
Weblogic crashed again with below dump:
===== BEGIN DUMP =============================================================
JRockit dump produced after 0 days, 07:17:18 on Fri May 07 15:26:16 2010
Additional information is available in:
E:\PortalLIVDomaina\jrockit.5772.dump
E:\PortalLIVDomaina\jrockit.5772.mdmp
If you see this dump, please open a support case with BEA and
supply as much information as you can on your system setup and
the program you were running. You can also search for solutions
to your problem at http://forums.bea.com in
the forum jrockit.developer.interest.general.
Error Message: Illegal memory access. [54]
Exception Rec: EXCEPTION_ACCESS_VIOLATION (c0000005) at 0x005148AF - memory at 0x00000000 could not be written.
Minidump : Wrote mdmp. Size is 1406MB
SafeDllMode : -1
Version : BEA JRockit(R) R27.3.1-1_CR344434-89345-1.5.0_11-20070925-1628-windows-ia32
GC Strategy : Mode: throughput. Currently using strategy: genparpar
GC Status : OC currently running, in phase: sweeping. This is OC#3000.
: YC is not running. Last finished YC was YC#9937.
OC History : Strategy genparpar was used for OC#1.
: Strategy singleparpar was used for OC#2.
: Strategy genparpar was used for OC#3 to OC#3000.
YC History : Ran 11 YCs before OC#2996.
: Ran 18 YCs before OC#2997.
: Ran 11 YCs before OC#2998.
: Ran 8 YCs before OC#2999.
: Ran 1 YCs before OC#3000.
Heap : 0x00900000 - 0x60900000
Compaction : 0x06900000 - 0x0C900000
Could you please provide some input on this?
Thanks,
Sanjeev

Downloading via XHR and writing large files using WinJS fails with message "Not enough storage is available to complete this operation"

Hello,
I have an issue that some user are experiencing but I can't reproduce it myself on my laptop. What I am trying to do it grab a file (zip file) via XHR. The file can be quite big, like 500Mb. Then, I want to write it on the user's storage.
Here is the code I use:
DownloadOperation.prototype.onXHRResult = function (file, result) {
var status = result.srcElement.status;
if (status == 200) {
var bytes = null;
try{
bytes = new Uint8Array(result.srcElement.response, 0, result.srcElement.response.byteLength);
} catch (e) {
try {
Utils.logError(e);
var message = "Error while extracting the file " + this.fileName + ". Try emptying your windows bin.";
if (e && e.message){
message += " Error message: " + e.message;
var popup = new Windows.UI.Popups.MessageDialog(message);
popup.showAsync();
} catch (e) { }
this.onWriteFileError(e);
return;
Windows.Storage.FileIO.writeBytesAsync(file, bytes).then(
this.onWriteFileComplete.bind(this, file),
this.onWriteFileError.bind(this)
} else if (status > 400) {
this.error(null);
The error happens at this line:
bytes = new Uint8Array(result.srcElement.response, 0, result.srcElement.response.byteLength);
With description "Not enough storage is available to complete this operation". The user has only a C drive with plenty of space available, so I believe the error message given by IE might be a little wrong. Maybe in some situations, Uint8Array
can't handle such large file? The program fails on a "ASUSTek T100TA" but not on my laptop (standard one)
Can somebody help me with that? Is there a better way to write a downloaded binary file to the disk not passing via a Uint8Array?
Thanks a lot,
Fabien

Hi Fabien,
If Uint8Array works fine on the other computer, it should not be the problem of the API, but instead it could be the setting or configuration for IE.
Actually using XHR for 500MB zip file is not suggested, base on the documentation:
How to download a file, XHR wraps an
XMLHttpRequest call in a promise, which is not a good approach for big item download, please use
Background Transfer instead, which is designed to receive big items.
Simply search on the Internet, and looks like the not enough storage error is a potential issue while using XMLHttpRequest:
http://forums.asp.net/p/1985921/5692494.aspx?PRB+XMLHttpRequest+returns+error+Not+enough+storage+is+available+to+complete+this+operation, however I'm not familiar with how to solve the XMLHttpRequest issues.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Win 7 Pro x64 Error 0x8007046a: Not enough server storage is available to process this command.

I installed Win 7 Pro x64 on a reasonably decent machine (Nvidia nForce 680i SLI, core 2 duo, 4 gig ram). It was a clean install on a freshly formatted partition. While copying a large bunch of files from another machine on the LAN, I get "Error 0x8007046a: Not enough server storage is available to process this command." It does give me the option to retry and continue, but the error inevitably pops up again later during the copy. Googling the error, I found a reference to it, suggesting I go to the registry and increase the IRPStackSize (but this article was not specific to Win 7). I tried increasing it as high as 32 hex. This reduces the frequency of the error, but does not eliminate it completely. Also, I now see a new error sometimes that says, "Too many files are currently in use. Quit one or more programs and then try again." That's odd, because I don't have anything else running. I haven't seen these errors when copying files to different partitions on the machine, so I assume it's something to do with network.

Hi,
To troubleshoot the issue, please try to do an In-Place Upgrade to repair the system.
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
Thanks,
Novak

Error when trying to print. Not enough storage is avail. to process command. How can I fix this?

HP Officejet 6500 All-In-One
This is what pop's up when I try to print.
An error has occured in script on this page.
Not enough storage is available to process command.
Please tell me how to fix this, I give up!
Thanks,
Cindy

Hi Cindy,
What operating system are you using?
Open Computer / Myl Computer, right click Driver C and click on Properties - how much free hard-disk space you have on the drive?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Optimize-volume -retrim gives error Optimize-Volume : Not enough storage is available to complete this operation

We ar e working with a 3par san combined with a hyper-v cluster. I have some virtual machines with direct attached storage. when i issue the command optimize-volume -driveletter x -retrim I Always get an error Not enough storage is avalable to complet this
operation. The command defrag /L gives me an out of memory error. All volumes are over 2 TB

Hi,
Thanks for responding,
We are working with Windows 2012 R2. We are running the optimize-volume cmdlet on the guest system. The guest system is directly attached to the SAN through the virtual fibre channel adapter. Although we have some volumes with less ten 15 % space we
also have tested it with volumes which have more then 25% space. All gave the same error so I'm wondering if it is the amount of memory addressed to the virtual machines what give the problem
The HP 3Par San normaly will do it automaticly but on 1 volume it is not cleaning up after we deleted 2 TB on disk space.

CF MX7 server receiving error message: Not enough storage is available

Production server and test server are receiving the following error messsage java.io.IOException: Not enough storage is available to process this command.
The test server has a one user per day while production server has thousands. Message appears about 15 times per day.
Using MX 7.02 with load a load balancer to two windows servers with the code residing on filer system. This message began to appear a few weeks ago.
Any ideas?

Sounds like dodgy file system permissions. Does the error always occur in the same place in the code?
Could some files or directories have been recently copied onto the filer which might have taken their old permissions with them, so CF doesn't actually have permissions to them?
Perhaps refreshing the permissions at the top level of the webroot, and cascading them through to all children might be a place to start.
Adam

System call failed. Error 1816 (Not enough quota is available to process)

Hello All,
I am trying to install NW 7.1 CE EHP1 using Windows 2003 server and MSSQL2005.
During the installation at INSTALL JAVA ENGINE phase i got below error
TRACE 2011-10-22 03:37:46.490 [synxc_security.cpp: 195]
Sywindows :: setDacl (HANDLE hobject, St_OBJECT_TYPE_ObjecType, ATL :: CDacl & rDacl,DWORD dwInheritanceFlowControl /"=0"
Syslib info about system call. os message 1816 (Not enough quota is available to process this command.)
Please let me know do i need to increase the size of the paging file? If yes, then how to proceed once the page file has been increased?
If the cause is some other factor, kindly tell me the solution to it as well.
Much appreciate your help
Thanks
Prabhjot
Edited by: PRABHJOT SINGH on Oct 24, 2011 11:35 PM

Hi,
Maybe a paging issue:
http://msdn.microsoft.com/en-us/library/ms820778.aspx
To increase page file:
http://www.petri.co.il/pagefile_optimization.htm
My computer -> rt click -> Properties -> Advanced -> Performance -> Settings -> Advanced -> Virtual memory change.
But you will need a restart as suggested by DatabaseSAP above.
Regards,
Srikishan

Error NOT ENOUGH STORAGE IS AVAILABLE with large records

All,
Windows NT 4.0
Visual C++ 6.0
Oracle 8
OO4023
The following code has failed when it has large records with an error from the Windows: "Not enough storage is available to complete this operation."
ODatabase &db = CDB::OGet(GetSession());
ODynaset ody;
OParameterCollection params = CDB::OGet(GetSession()).GetParameters(); // =====> ERROR ON THIS LINE.
Anyone has any idea ?
Thanks
Trong
[email protected]

The code will not help, it's an abnormal error
the code has been runing fine for the last two years
The error is not occuring all the time, it only occured once so far.
Sincerely yours
Ray

Error creating an image of Drive C:, rc =2

Hello, as mentioned in the subject line above, I get the following error when trying to capture an image of my reference computer:
Error creating an image of Drive C:, rc =2
ZTI Error - Non Zero return code by ZTIBackup, rc=2
ZTI ERROR - Non-zero return code by LiteTouch, rc = -2147467259
I've looked at other threads and tried suggestions such as adding the "Set Image Folder" / "Set Image Name" into the Task Sequence, but it solved nothing.
I am running Windows 7 Professional x64 and capturing from a server running MDT 2010.
Would there be anything else that would cause this?

I found out there was actually a second log! The one I posted previously was an old one...very strange. Here is the CURRENT ZTIBackup.log:
<![LOG[Property LogPath is now = C:\MININT\SMSOSD\OSDLOGS]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Microsoft Deployment Toolkit version: 5.1.1642.01]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property Debug is now = FALSE]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property DestinationDisk is now = 0]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property DestinationPartition is now = 1]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property DestinationLogicalDrive is now = C:]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Drive C: 29305520]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Local store path = C:\MININT\StateStore]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Total used space: 29305520]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Available space at C:\MININT\StateStore: 11652164]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Computer backup will use network path (ComputerBackupLocation=AUTO)]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property OSDComputerName is now = ]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[WARNING - Unable to validation connection because a blank UNC was specified.]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="2" thread="" file="ZTIBackup">
<![LOG[Beginning backup of drive C:]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[About to run command: cmd /c ""C:\WINDOWS\SYSTEM32\imagex.exe" /capture /compress maximum C: "\.wim" "201206141609CDrive" >> C:\MININT\SMSOSD\OSDLOGS\ZTIBackup_imagex.log 2>&1"]LOG]!><time="16:09:54.000+000" date="06-14-2012" component="ZTIBackup"
context="" type="1" thread="" file="ZTIBackup">
<![LOG[Return code from command = 2]LOG]!><time="16:09:56.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Error creating an image of drive C:, rc = 2]LOG]!><time="16:09:56.000+000" date="06-14-2012" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">
<![LOG[ZTIBackup COMPLETED. Return Value = 2]LOG]!><time="16:09:56.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[Property BackupScriptComplete is now = YES]LOG]!><time="16:09:56.000+000" date="06-14-2012" component="ZTIBackup" context="" type="1" thread="" file="ZTIBackup">
<![LOG[ZTI ERROR - Non-zero return code by ZTIBackup, rc = 2]LOG]!><time="16:09:56.000+000" date="06-14-2012" component="ZTIBackup" context="" type="3" thread="" file="ZTIBackup">

MDT 2013 - Litetouch deployment failed, Return Code = -2147467259 0x80004005

I'm attempting to deploy an image that I have recently captured with MDT. I was able to capture the image without any problems and after capturing, it booted up properly. But now when I go to deploy the image using a Standard Task Sequence it
errors out. It does boot into WinPE and gets to the installing operating system portion then spits out the following 8 errors:
(5624):2: Run ImageX: /apply "\\PDC31089\DeploymentShare$\Operating Systems\Win7_BUP_1-31-14\Win7_BUP_1-31-14.wim" 1 C:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Unknown error (Error: 000015F8; Source: Unknown)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015F8; Source: Unknown)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005After I receive the error messages if I attempt to restart the computer and allow it to boot up it just comes up with:"An operating system wasn't found. Try disconnecting any drives that don't contain an operating system"
I have tried the following to resolve this issue:
Create a new deployment share with only network drivers added and the one .WIM that was captured with MDT as well as one Task sequence.
Update to MDT 2013
Update Deployment share and completely regenerate Boot images
Tried starting deployment from within Windows by mapping the drive and executing litetouch.vbs
Also tried starting deployment using USB boot disk
I'm running out of ideas and seem to keep getting the same 8 error messages. It's very aggravating and am hoping that someone can point me in the right direction.
I've included some log files on Skydrive at: https://skydrive.live.com/redir?resid=6375A8F9E8089918%21105

I came across this post recently. I am having the same string of errors suddenly when I try to deploy any image from my MDT 2013 server now. Previous images now fail to install soon after the Inject Drivers task sequence at the Install Operating System sequence.
Each time I try to deploy an image(have tried several each with different task sequences), I get the same 7 errors.
The errors produced are:
Litetouch deployment failed, Return Code = -2147467259 0x80004005
Failed to run the action: Install Operating System.
Incorrect Function (Error: 00000001; Source: Windows)
The execution of the group (Install) has failed and the execution has been
aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)
Failed to run the last action: Install Operating System. Execution of task
sequence failed.
Incorrect Function
(Error: 00000001;
Source: Windows)
Task Sequence Engine failed! Code: enExecutionFail
Task sequence execution failed with error code 80004005
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
My HD size is 146GB with about 71GB being free.
The BDD.log file is too large to post here apparently. Here are the
last bits of it.
<![LOG[Assume this disk is the destination Disk, and verify.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[TargetPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Search for Drive: TargetPartitionIdentifier SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Found Drive: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Property OSDisk is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Target Drive Letter Found: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Found OS Drive: C 0]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[New ZTIDiskPartition : \\MININT-I3DUVLI\root\cimv2:Win32_LogicalDisk.DeviceID="C:" \\MININT-I3DUVLI\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="11:36:58.000+000"
date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Check Disk [0] <> [0] OK to skip.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[####### NOTE: If this is one of the last lines in your BDD.log file, check C: for the most up to date bdd.log!!!]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
<![LOG[Event 41001 sent: ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread=""
file="ZTIDiskpart">

Failed (why else would I post). Error creating an image of Drive D:, rc = 2. Return Code -2147467259 0x80004005. "Not enough storage is available to process this command".

Similar Messages

Maybe you are looking for